Save file as ANSI: Which tool and how?

Hi,
I got only:
MS Word
MS Wordpad
MS Notepad.
I need to save a file as ANSI.
How can I achieve this?
Regards Mario

HI,
Is it related XI..???
not so see
http://www.codeproject.com/file/ANSI-UNICODE_conversion.asp?print=true
http://livedocs.adobe.com/coldfusion/5.0/Using_ColdFusion_Studio/files4.htm
Regards
Chilla..

Similar Messages

Which file type should I use and how I use it?

Hello!
I need to create a file with some data that has been inserted manually.
In this file, for example, there are:
ProjectName1: string1, string7… string10, date1
ProjectName2: string11, string15… string20, date2
ProjectNamek: string 100, string 116 … string 140, date1
I know only one thing: one of the strings.
What I need to find in the file:
I need to find the string at one of these rows and get its ProjectName and date.
For example: if I have string15,
I should find string15 in the file, and get its ProjectName and date:
ProjectName2, date2
Which file type should I use and how I use it? What is the best solution?
Thanks!

800512 wrote:
I need to create a file with some data that has been inserted manually.
In this file, for example, there are:
ProjectName1: string1, string7… string10, date1In addition to Pandiya's advice, if the string is always in exactly the above format
(ie:
1. ProjectName always starts the line and ends with a ':'.
2. The rest of the strings on the line are separated by ", " and will never contain ", "
you might also want to have a look at String.split().
Winston

I had a windows laptop, and I save files like photos, documents, videos and other things on an external hard drive, and now I want to move those files to the Mac book Pro, and then move those files again to another external hard drive 1T. My question is:

I had a windows laptop, and I save files like photos,documents, videos and other things on an external hard drive, and now I want tomove those files to the Mac book Pro, and then move those files again toanother external hard drive 1T. My question is: Is it possible? Doing this willnot affect the files that I had in windows? No information is lost? or how cani do it?

Connect the external drive to your Mac and drag the files from it to your Mac's internal drive. Then dismount and disconnect the external drive, connect the 1TB external drive, and drag the files from the internal drive onto the external. Nothing will have been deleted from any of the drives up to this point; the files will only have been copied. Verify that the files are readable. There's no reason they shouldn't be; this is just a precaution.
Now if you wish to delete the files from any of the drives, drag them to the Trash, and Empty the Trash while the drive from which they came is still connected. If you disconnect the drive before emptying the Trash, the files you were trying to remove from it won't be deleted. They'll remain in the Trash and continue to take up space on the drive.
Note that if your external drives are in NTFS format, you won't be able to write anything to them or delete anything from them, though you will be able to read and copy the files they contain. The NTFS disk format is read-only to the Mac OS, unless you have a third-party NTFS driver installed. To make your drives cross-platform readable and writable, you must reformat them in the FAT32 or ExFAT format.

TS1702 The application "video converter" says that I can retrieve my converted files through iTunes. Where and how does that happen?

The application "video converter" says that I can retrieve my converted files through iTunes. Where and how does that happen?

I see an iPhone App called Video Converter but not an iPad app. When to do a search, it comes up with a whole bunch of apps so perhaps if you tell us exactly which app it is .....

I am using a verizon email address and microsoft office for mac outlook program to manage my emails. Does any one know if the apple outlook version offers the ability to save emails as a pdf so that I can save it to my hard drive and how to access?

I am using a verizon email address and microsoft office for mac outlook program to manage my emails. Does any one know if the apple outlook version offers the ability to save emails as a pdf so that I can save it to my hard drive and how to access?

This is the Microsoft forum site that parallels what Apple has:
Office for Mac forums
It's not uncommon for MS employees who work with the Mac side of the business to help there. All in all a useful resource for Office:Mac

Can someone please tell me the cause of the msg-The song could not be used because the original file could not be found- and how I might correct that problem?

Can anyone please tell me the cause of the msg-The song" " could no be used
because the original file could not be found-and how I might correct that problem? Lou

I stupidly tried to copy my music files to an external drive so I could transfer them to my new iMac (old Macbook Pro is being retired). I now know I should've tried home sharing or something to transfer the music.
Anyway, the situation I am in is that I have not managed to transfer anything and I now cannot access the music on my old Macbook Pro either! I have the message "the song 'xyz' could not be used because the original file could not be found. Would you like to locate it?". I understand that this is because iTunes cannot locate the files. When I try to locate the files I find nothing.
I have tried searching my whole Macbook Pro for mp3 files and m4a files and Spotlight cant find any! The tracks are all still listed in iTunes. I also searched the external hard drive. I definitely haven't deleted anything. So where could they have gone and is there anything else I can do to search for them? I have a feeling I am just not searching for them in the right way because I have not deleted anything.
Old computer is Macbook Pro OS X 10.6.8 with iTunes 10.4.1
New computer is iMac OS X 10.7.2 with iTunes 10.5
All I want to do is to set everything back to how it was so I can try the transfer a better way.
Please help. Thanks, Dashford.

Can Framemaker 12 save files down in Framemaker 11 and 10 ? Is it backward compatible?

Can Framemaker 12 save files down in Framemaker 11 and 10 ? Is it backward compatible?
Thanks,

> Times New Roman ... you’re probably using the Unicode version of it ...
Port a legacy font from the FM7 machine to the FM12 machine, such as Type1 Times, and convert the document to that on the FM12 machine.
This may not completely solve the problem, as FM8 and later, when opening a pre-FM8 document, appears to convert some things to Unicode code points (even to the point of synthesizing a Unicode encoding of a legacy font, see Re: Adding the Trademark symbol to a document). Saving back to MIF7 probably does not convert the code points back, and FM7 may well complain, or crash, or something.
If the problem is limited to certain special characters, like ™, there may be work-arounds, like invoking them only as Variables.
This Unicode border between FM7.2 and FM8 may prove to be one-way for many documents, rather like the spikes at the exit of rental car lots. Do not back up. Extreme document damage may result.

Can SQL*PLUS deal with 'flat ASCII files' (input ) in UNIX ? and how?

Can SQL*PLUS deal with 'flat ASCII files' (input ) in UNIX ? and how?

No, but PL/SQL can. Look at utl_file.
John Alexander www.summitsoftwaredesign.com

Hi there. Can a MacBook from mid 2007 running OS X (10.6.8) be upgraded to a later version? If yes which one and how can I get it please? Many thanks. Franck

Hi there. Can a MacBook from mid 2007 running OS X (10.6.8) be upgraded to a later version? If yes which one and how can I get it please? Many thanks. Franck

10.7 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store. The price is $19.99.
You must have at least a Late 2006 model 2,1 MacBook.
The model 2,1 (Late 2006 & Mid 2007) can use 3gb of 200 pin 667mhz PC2-5300 RAM
The model 3,1 (Late 2007) can use 6gb of 200 pin 667mhz PC2-5300 RAM
Lion will require at least 2gb of RAM but really needs 4gb to run smoothly. You can put two 2gb RAM sticks in the model 2,1 but it can only use 3,3gb. This is a hardware limitation and cannot be changed.
http://en.wikipedia.org/wiki/3_GB_barrier
http://www.everymac.com/systems/apple/macbook_pro/faq/macbook-pro-core-2-duo-3-g b-memory-limitation-details.html
OWC tests have found that there is a slight speed increase with having two 2gb sticks in rather than one 1gb and one 2gb. the model 2,1 is in the gray lines at the bottom of the graph. http://eshop.macsales.com/shop/Memory_Benchmark/Apple_MacBook/
As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

I can't restore my file,edit,history,bookmarks,tools and help

my file,edit,history,bookmarks,tools and help is missing

Hit the '''Alt''' key ''(Cmd for Mac)'' to show the Menu bar, then open View > Toolbars and select Menu bar, so it has a check-mark.

What tools and how to remove the local saturation of a video?

Pessoal Bom dia..! Alguém pode me ajudar com essa pergunta?
Personal Good day ... Can anyone meajudar with this question?

Tank you
M@rkony
Em Sábado, 30 de Agosto de 2014 13:43, Ann Bens <[email protected]> escreveu:
What tools and how to remove the local saturation of a video? created by Ann Bens in Premiere Pro - View the full discussion

HT1766 Hello, I am using iphone 4 with softward 4.3. Can I update software and to which version and how?

Hello, I am using iphone 4 with softward 4.3. Can I update software and to which version and how?
Thank you for your advice.

You can go to ios7.1
UPDATING iOS
Over the air updating of iOS needs iOS 5 or later so unless you have iOS 5 or later you will not see updating in setting
The following link explains how to update http://support.apple.com/kb/HT4972
This link explains how to update using wireless http://support.apple.com/kb/HT4623
This explains how to transfer purchases to your computer http://support.apple.com/kb/ht1848

Audio noise, which filter and how to...

Greetings.
I've got a project that I'm pretty happy with and now I'm ready to tweek the sound. The audio was a recording of an interview using the internal mike on a Canon Optura 50.
I know, not exactly high end, but that is what I had. The wireless lav flaked out.
Needless to say the audio could use some sort of clean up. There seems to be a constant and consistant sound throughout the interview in the audio. It is either the sound of the camera itself, the room we were in, or a combination of both.
FCE has LOTS of audio filters, and reading the manual confused more than helped. Can anyone describe a way to filter, and which filter, starting adjustments, etc. I should be approaching?
The good thing about my project is that once I get one clip adjusted, I think I can copy and paste the attributes to the other similar clips.
Thanks.
Jonathan

Hi Jonathan,
You can try the hum filter in FCE, it may help, but it's really designed to reduce 50/60Hz A/C hum. Graphic EQ really won't help - the noise crosses a wide swath of frequencies and has enough randomness in it that you need something that has a 'learn noise' capability to really attack the problem.
Audacity is a sound editor. I'd suggest exporting your audio track as an AIFF file, import that into Audacity and see if the noise filter will work on it (you DO sample the noise in Audacity just like in Sound Soap). If it works, you can save the result and import it back into FCE.

Shiladitya Mukherjee help...so which version and how??

on which version of the webdb or portal can it be done...
and how...
please heeeeeeeeeeeelp

-------<your query>--------------
Chetan ,
so if i want to do the same thing than cami, what is another way to design this...
i have the right only to use the tools of the webdb to do this
do two forms on the same page???
how do i do that
-------</your query>--------------
Hi Damien,
If I have understood your problem correctly, then I guess your are trying to have two forms in the same right ??
steps :-
1> Make your appicalition as a provider
2> Expose the relevant forms as portlets
3> create a new page, choose the provider that contains your form portlets and include them in the page.
4> View the page -- both the forms should be visible.

How can i get also the files in the root directory and how can i for testing add items of IEnumerable FTPListDetail to List string ?

What i get is only the directories and files that in other nodes. But i have also files on the root directory and i never
get them. This is a screenshot of my program after i got the content of my ftp. I'm using treeView to display my ftp content:
You can see two directories from the root but no files on the root it self. And in my ftp server host i have files in the root direcory.
This is the method i'm using to get the directory listing:
public IEnumerable<FTPListDetail> GetDirectoryListing(string rootUri)
var CurrentRemoteDirectory = rootUri;
var result = new StringBuilder();
var request = GetWebRequest(WebRequestMethods.Ftp.ListDirectoryDetails, CurrentRemoteDirectory);
using (var response = request.GetResponse())
using (var reader = new StreamReader(response.GetResponseStream()))
string line = reader.ReadLine();
while (line != null)
result.Append(line);
result.Append("\n");
line = reader.ReadLine();
if (string.IsNullOrEmpty(result.ToString()))
return new List<FTPListDetail>();
result.Remove(result.ToString().LastIndexOf("\n"), 1);
var results = result.ToString().Split('\n');
string regex =
@"^" + //# Start of line
@"(?<dir>[\-ld])" + //# File size
@"(?<permission>[\-rwx]{9})" + //# Whitespace \n
@"\s+" + //# Whitespace \n
@"(?<filecode>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<owner>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<group>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<size>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<month>\w{3})" + //# Month (3 letters) \n
@"\s+" + //# Whitespace \n
@"(?<day>\d{1,2})" + //# Day (1 or 2 digits) \n
@"\s+" + //# Whitespace \n
@"(?<timeyear>[\d:]{4,5})" + //# Time or year \n
@"\s+" + //# Whitespace \n
@"(?<filename>(.*))" + //# Filename \n
@"$"; //# End of line
var myresult = new List<FTPListDetail>();
foreach (var parsed in results)
var split = new Regex(regex)
.Match(parsed);
var dir = split.Groups["dir"].ToString();
var permission = split.Groups["permission"].ToString();
var filecode = split.Groups["filecode"].ToString();
var owner = split.Groups["owner"].ToString();
var group = split.Groups["group"].ToString();
var filename = split.Groups["filename"].ToString();
var size = split.Groups["size"].Length;
myresult.Add(new FTPListDetail()
Dir = dir,
Filecode = filecode,
Group = group,
FullPath = CurrentRemoteDirectory + "/" + filename,
Name = filename,
Owner = owner,
Permission = permission,
return myresult;
And then this method to loop over and listing :
private int total_dirs;
private int searched_until_now_dirs;
private int max_percentage;
private TreeNode directories_real_time;
private string SummaryText;
private TreeNode CreateDirectoryNode(string path, string name , int recursive_levl )
var directoryNode = new TreeNode(name);
var directoryListing = GetDirectoryListing(path);
var directories = directoryListing.Where(d => d.IsDirectory);
var files = directoryListing.Where(d => !d.IsDirectory);
total_dirs += directories.Count<FTPListDetail>();
searched_until_now_dirs++;
int percentage = 0;
foreach (var dir in directories)
directoryNode.Nodes.Add(CreateDirectoryNode(dir.FullPath, dir.Name, recursive_levl+1));
if (recursive_levl == 1)
TreeNode temp_tn = (TreeNode)directoryNode.Clone();
this.BeginInvoke(new MethodInvoker( delegate
UpdateList(temp_tn);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
foreach (var file in files)
TreeNode file_tree_node = new TreeNode(file.Name);
file_tree_node.Tag = "file" ;
directoryNode.Nodes.Add(file_tree_node);
numberOfFiles.Add(file.FullPath);
return directoryNode;
Then updating the treeView:
DateTime last_update;
private void UpdateList(TreeNode tn_rt)
TimeSpan ts = DateTime.Now - last_update;
if (ts.TotalMilliseconds > 200)
last_update = DateTime.Now;
treeViewMS1.BeginUpdate();
treeViewMS1.Nodes.Clear();
treeViewMS1.Nodes.Add(tn_rt);
ExpandToLevel(treeViewMS1.Nodes, 1);
treeViewMS1.EndUpdate();
And inside a backgroundworker do work how i'm using it:
var root = Convert.ToString(e.Argument);
var dirNode = CreateDirectoryNode(root, "root", 1);
e.Result = dirNode;
And last the FTPListDetail class:
public class FTPListDetail
public bool IsDirectory
get
return !string.IsNullOrWhiteSpace(Dir) && Dir.ToLower().Equals("d");
internal string Dir { get; set; }
public string Permission { get; set; }
public string Filecode { get; set; }
public string Owner { get; set; }
public string Group { get; set; }
public string Name { get; set; }
public string FullPath { get; set; }
Now the main problem is that when i list the files and directories and display them in the treeView it dosen't get/display
the files in the root directory. Only in the sub nodes.
I will see the files inside hello and stats but i need also to see the files in the root directory.
1. How can i get and list/display the files of the root directory ?
2. For the test i tried to add to a List<string> the items in var files to see if i get the root files at all.
This is what i tried in the CreateDirectoryNode before it i added:
private List<string> testfiles = new List<string>();
Then after var files i did:
testfiles.Add(files.ToList()
But this is wrong. I just wanted to see in testfiles what items i'm getting in var files in the end of the process.
Both var files and directoryListing are IEnumerable<FTPListDetail> type.
The most important is to make the number 1 i mentioned and then to do number 2.

Risa no.
What i mean is this. This is a screenshot of my ftp server at my host(ipage.com).
Now this is a screenshot of my program and you can see that in my program i have only the directories hello stats test but i don't have the files in the root: htaccess.config swp txt 1.txt 2.png....all this files i don't have it on my treeView.
What i want it to be is that on my program on the treeView i will also display the files like in my ftp server.
I see in my program only the directories and the files in the directories but i don't see the files on the root directory/node.
I need it to be like in my ftp server i need to see in my program the htaccess 1.txt 2.png and so on.
So what i wrote in my main question is that in the var files i see this files of the root directory i just don't know to add and display them in my treeView(my treeView is treeViewMS1).
I know i checked in my program in the method CreateDirectoryNode i see in the first iteration of the recursive that var files contain this root files i just dont know how to add and display them in my treeView.
On the next iterations when it does the recursive it's adding the directories hello stats test and the files in this directories but i need it to first add the root files.

Save file as ANSI: Which tool and how?

Similar Messages

Maybe you are looking for