Save for Web & Devices... Illustrator CS4

Hi
I am having trouble saving for web from Illustrator CS4. What I'm finding happens is, when you go to Save for Web & Devices... you can see a pixel of white at the top of the image that runs the full width of the document. At first I thought it was the preview and wouldn't really be there once I had saved it but it was. I first noticed this with a document that contained 2 slices so I thought that the slices I had drawn were inaccurate but they weren't. The images do not increase by a pixel but not sure whether the images distort by a pixel or whether the bottom pixel is cropped off. This doesn't happen with every single file and I've experienced it on more than one machine.
Has anybody else experienced this and know how to fix it?
Richard.

Please post in the Illy forum.

Similar Messages

Save for web & devices not working (CS4)

I noticed today that I can't save for web & devices any more. when I try it shuts down the program and gives me the following message to send a crash report:
Adobe has detected that the application Adobe Illustrator CS4 has unexpectedly quit.
this started as a Photoshop CS4 problem where I also can't save for web & devices any more. before people jump down my throat again for mentioning this Photoshop problem on the Illustrator forum - this is for context only. I have the same problem in both applications. I just include this information here in case it helps. the Photoshop message I get is:
The operation can not be completed.
savign for web & devices worked totally fine up till last night in Photoshop. haven't saved anything out of Illustrator for web & devices in a while but it used to work just fine.
I have a PC and use Windows 7. All my Adobe products are up-to-date.
Any help is much appreciated. Thx a lot!

thank you very much. at least it happened before. I was seriously doubting myself. tried trashing preference files multiple times, but that didn't help. will reinstall everything and see if that does the trick.
thanks again!

CS4 using Save for Web & Devices Problem

I choose Save for Web & Devices. Select .jpg as file type but on bottom left under preview it says GIF. And I cannot reduce the resolution quality using the slide bar. It always says GIF and file size stays the same. Can anyone tell me how to fix this? It's only been happening the last few days. Worked fine before. Oh and the file I am trying to save is 72dpi RGB less than 200px x 200px. So don't think it's a file settings issue.

Thanks for the response.
The background is transparent and will end up on a white background eventually.
I tried to make it clear in Dreamweaver by scaling it and it did seem to improve it somewhat. But it still doesn't look like the clear copy in Illustrator that I started with...
I also need to be able to embed this in a Word document to print for a hardcopy manual.
I had this same problem with Freehand a few years ago.

'Save for Web & Devices' selects multiple artboards - AI CS4

I have a simple, two-artboard document (like the old FreeHand days!) but, when I go to 'Save for Web & Devices' to optimise it, the graphic from both pages appear as one optimised image. How can I get it to select only the artboard I am viewing?
Many thanks.

Well, one way would be to create an artboard that's the size of your art. You can do this easily enough by choosing the Artboard Tool and clicking once on your artwork. Alternatively, you can define slices.
:) Mordy

Save for Web & Devices 2-up view not appearing side by side

Hi, I'm hoping someone can help me with this issue. In Photoshop CS4, when I used to go to the Save for Web & Devices screen, I liked using the 2-up view so I could see the difference between my original and the optimized versions. However, I've tried doing this in CS4 now and I remember seeing (in CS3 I believe) where the layout of the 2-up view was side by side (vertically) so you could have the original on the left and the optimized on the right. Now, in CS4, at least on my machine (mac OSX tiger), the 2-up view only displays the original and optimized horizontally (with the original on top and the optimized below). Is this a fixed layout for the 2-up view or can this be changed? Is this normal is something corrupted? I've looked everywhere for a button or setting to click (that I could think of) and have not been able to find a place where the layout setting can be changed. I know it's a very small issue for most people, but I really preferred viewing the two versions side by side vertically instead of one on top of the other. I'm assuming that this is just a setting somewhere that the user could change but I don't know - perhaps this interface update is new to CS4 and is not customizable?
Anyone have any information or solutions to this?

Thanks so much...that was so easy, but I don't think I would ever have found it!
It works now, I just resized the window and it's now side by side...funny how this was not described in the help file when I looked it up!
Thanks again.

CS5 Photoshop - Adobe Save for Web & Devices Error

Hi folks,
I know similar threads exists, but this one is different. For some reason, out of the blue, I can't use 'Save for Web' anymore. When I choose 'save for web', it opens the preview dialog nicely, up until I save & get this error:
"Adobe Save for Web & Devices Error
Could not complete this operation. An unknown operating system error has occurred."
Cleared all my settings, and the error remains.
I uninstalled PS CS5, installed it again... still get this error.
Hope someone knows how to fix it!
Tx!
MacBookPro3,1, running all the latest updates (OSX 10.6.4), CS5 Master Collection.
Luckily still have CS4 Master Collection installed (and Flash CS3).
(I've just got to get this off my chest, CS5 has so much issues that I stopped using it, I'm not getting paid for playing crashtestdummie. Please don't rush any future CS collections and try fixing bugs instead. )

Hi Wade,
Tx, but 99% of my time, I work on my local system (scratch disk also). Already had problems working with the company's network (files get locked or corrupted while trying to save), so we've learned the hard way not to use the network.
I guess that's somewhat expected if you work with a Mac, in a professional Windows environment.
Meanwhile, I'm a step closer in finding a solution myself. A colleague gave me a great tip, if you create an extra user account on the system, you start with a clean library. On my second account, PS CS5 is working just fine. So clearly, something went wrong in my library. Maybe permissions like you've said. At this point, I could try to fix it by copying files from the one user to the other. But I would like to wait for that connect session so they can see what's wrong.

Using "Save for Web & Devices" for a Organization Chart with Text

I created a document in CS3 Illustrator that is an Organization Chart. It contains rectangles, lines, and text. It looks great in Illustrator.
I have tried to save it using "Save for Web & Devices" to create a JPEG and a GIF so that I can pop it into a Dreamweaver document as an image and it keeps coming out blurry.
I have tried changing its size and resolution. I have tried opening and exporting it into Photoshop to try to "clean" it up. Nothing seems to be working.
I'm obviously unlettered in this modus operandi!
meem

Thanks for the response.
The background is transparent and will end up on a white background eventually.
I tried to make it clear in Dreamweaver by scaling it and it did seem to improve it somewhat. But it still doesn't look like the clear copy in Illustrator that I started with...
I also need to be able to embed this in a Word document to print for a hardcopy manual.
I had this same problem with Freehand a few years ago.

"Save for Web & Devices" Huge BUG and major annoyance!

Photoshop CS3
I am so tired of losing all of my work for this bug it isn't even funny! It doesn't lock up Photoshop but does make it impossible to save anything including all the currently cropped and resized images open in PS. It forces you to lose hours of work in some cases which is what just now happened and I want something done with this since it is probably the biggest annoyance from a BUG of all the adobe products ever.
To replicate this bug:
Open an image, any image.
Go to File and Choose "Save for Web & Devices".
Once the "Save for Web & Devices" dialog box is open choose save, BUT here is the bug, after the Save As dialog box appears choose cancel to go back to the open and now useless "Save for Web & Devices".
Attempt to now close the "Save for Web & Devices" dialog box.
The issue is it won't close once I cancel after choosing save from the "Save for Web & Devices" dialog. I cannot resize the window or do anything in PS when this happens since it takes complete focus. I cannot close the box or choose from most of the options on the right since now at this point they'll all be blank.
This has happened before and I had learned to save no matter what to avoid this but just forgot and am once again about to lose HOURS of work because of it...
I have searched and searched and cannot find a separate process to close in device manager to stop just it (which is lame). All I can do is close PS and say good bye to everything I had already done.
Of course I would like a solution to this and a fix but having owned Adobe products for years know this is highly unlikely and to get a fix you must buy the new version (pathetic). So, I will settle for yet another hopeful work around to get around this idiotic BUG.
EDIT: I have rebuilt my preferences countless times (since that seems to be needed for so many of Adobe's products issues) as well as complete resinstalls of the CS3 Production Premium Suite to no avail. I have dealt with this issue for several years and several new installs. I have an aviation forum and people have been able to replicate this on theirs installs as well, to include one CS4 user.
Message was edited by: Danbo342

Thanks Noel, and others.
I have listened to people. In fact read my second post. It was seeing the 1st two that couldn't duplicate the error get on the phone to a friend in Germany that was able to duplicate it. I then came back here and shared what my suspicions were of the Matrox unit. The other person able to duplicate the issue has yet to return to the forum for me to further check with (I guess some people sleep).
To be clear here. I have owned CS3 since it's release. I have built myself several computers since I bought it and this one is actually the third since then. This particular issue though was never seen until a few months ago since I seldomly use the Save for Web for saving files and just started using it on my latest flash site.
As for video cards. This card I am using is my 3rd. My GTX 260 was great but being having other joys of the PC I also always kept up with the latest and greatest cards so thus came my last purchase of the GTX295 before the newer ones hit. Point being, the issue is most likely my Trip2GO and plan on testing when I get home and get it ripped apart. I do web design on the side which is one reason the trip2Go for my home workstation. The other point is that I do a LOT more than Adobe work and my card needs to be high end and not some cheap card just to make my suite work. Maybe in the future I'll make another comp,,, one for every other product I own and then one just for Adobe's products.
Now as for tech support and myself. I am A+ certified. I am certified in every OS since Dos 6 and a hardware engineer. I do tech support, have 3 support forums and 11 web site, all primarily based on support. My comments above were not about getting mean, it is because Adobe support in general is one of the worst that I have ever had the misfortune to deal with and strongly disagree with the way they cut support and updates to a year old product (that's when no more patches came out I meant and known bugs were written off for the next version). To say try a new video card to me is like a supposed "tech" to say reinstall your OS, or like here reading people say (what I originally said I did) about clearing the preferences. Sure, this help clear up lots of Adobe product abnormalities but listen up folks, it's not a SOLUTION, it is merely a work around. It shouldn't get so screwed up to begin with. This is not my product and although I have tried it, it is wrong to not fix these issues and just expect people to keep refreshing there preferences. It takes me hours and days to get things back the way I want them and normally half way to heaven another bug and I have to reset them yet again! This is us dealing with a broken product, period. It is far from a solution, there's a huge difference.
Moving along,,, This build is a few months old but my windows install is much more recent. All firmware, drivers you name it is up to speed 100% I guaruntee. My hardware is all working perfectly with the propable exception of the Matrox rig. It has to be it. Being that the 1st two people to reply in my own forum were able to immediately duplicate the error had me thinking other but as you should be able to see is that changed fast and if you read this thread from top to bottom you'll see that I have been providing all the answers people are asking.
Thanks again, I'll report back tonight. My current plan is to go through the painful process of getting just one monitor working without the Matrox unit, flushing my preferences and trying again. I think it will work fine but will report back either way.

Save for Web & Devices Box Greyed Out

Hey everyone,
I'm trying to save a Photoshop CS4 file for Web & Devices so I can have Photoshop compile the slices and the CSS so I can hand-design rollovers. Unfortunately, all of a sudden the dialogue box for Save For Web & Devices is greyed out... I've check online, changed color profiles, deleted save for web and devices library files, updated Photoshop, nothing. I've even checked past .psds I've designed that I've saved for Web & Devices and haven't changed since--even the Web & Devices box is greyed out for them. Help! What do I do? I need to do this before Friday. Thank you!
WebsiteInDistress

Hi
I'm also having the same problem with the Save for Web & Devices Box Greyed Out.
I think it's the plugin that's corrupt, as I've tried deleting preferences and seetings. I can't find the photoshop cd to reinstall it.
Has anyone got the MAC CS4 Photoshop "save for web plugin" (Users/[Username]/Library/Preferences/Adobe/Plugins/Adobe Save for Web CS4/Photoshop/Adobe Save for Web CS4 Prefs) that they could send me.
Thanks very much
Abi

Another save for web devices error - File already exists?

I've been using the same Photoshop CS4 on Windows 7 for about a year now, and only now this problem occurs to me.
Whenever I try to preview gifs in any browser (tried a few), I get the error message "Could not complete this operation. A file by this name already exists."
Tried renaming the files, replacing them, creating new ones, tried to enter preview on old files that previously worked, but always get the same error message.
I did some research and tried deleting both the main Save for Web and Devices pref file, and the other so called "hidden one" in the plugins folder. I've tried reinstalling photoshop from scratch. Nothing works.
Please help me. I'm near desperate :/

Ah, sorry, now I see what you're doing.
I haven't had the issue myself, but I can guess that one or more of the temporary files it needs to create in order to show them in your browser must be failing in creation. Check the permissions on the folder identified by your TEMP environment variable - you should have Full Control of your TEMP area..
Specifically, it creates a "Save for Web" subfolder there. You might be able to delete that entirely in order to start afresh.
Just to test, I've opened Photoshop CS4, entered Save for Web & Devices, and pressed the Preview button myself and it worked okay here... Your TEMP area is likely different than mine.
-Noel

Quick Trim option in Save for Web & Devices

Hi,
a feature to do a quick Trim in Save for Web & Devices dialogue would be great, especially if it was enabled with a checkbox, then when you enable it, it activates a dialogue with the three options that already exist in Trim option (Transparent pixels, Top left color, Bottom right color).
Let me know what you think.

I need to figure out why my trim option is always grayed out. It's saved in PSD format, yet the option to trim the transparent pixels is grayed out. why is that? what am I doing wrong? I must have to change something.
Thanks in advance, Linda

Option help in Save for Web & Devices dialog

When down sampling images for use in a DPS folio, what settings should be chosen in the Save for Web & Devices dialog in Photoshop?

I need to figure out why my trim option is always grayed out. It's saved in PSD format, yet the option to trim the transparent pixels is grayed out. why is that? what am I doing wrong? I must have to change something.
Thanks in advance, Linda

Save for Web & Devices window doesn't fit @ 1366 x 768

I'm using a MacBook Air running at 1366 x 768, or within Adobe CS5 requirement tolerances, but whenever I try to 'Save for Web & Devices', the dialogue box that pops up is much too big, vertically speaking, for my screen. Attempting to minimize/maximize doesn't rectify the problem--a substantial portion of the window, including the buttons necessary to execute the save action, are in the not-visible portion of the window. If I hit ENTER/RETURN, I can complete the process, but this is clearly a bug: I should be able to resize the window, or scroll within it.
Is there something else I can do, short of pursue a fix from Adobe? Some setting I've overlooked? I'm running Lion, but this problem started on a Snow Leopard install.

mcpeckham wrote:
…Yep, that seems to work, but I shouldn't have to hide the Dock, right?…
Wrong! Yes, you do have to hide the Dock if you want to share the Adobe Photoshop minimum required space with Apple's Dock, which in my opinion should be invisible when not needed, which in turn is for a split second every half hour or more. I'm sick and tired of Apple shoving ugly, intrusive OS features down our throats (see footnote * in next paragraph). I want the computer to do what I want, not what Apple wants.
* 2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX, 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; Spotblight, Dashboard and Time Machine permanently disabled; Dock hidden; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.
Mr. Schewe explains it more forcefully in his last post above.
My experience over the years has shown me consistently that the more vocal or vehement the complaint, vent or rant, the greater the likelihood of PEBKAC (google that if you're not familiar with the term).
Wo Tai Lao Le
我太老了

Save for Web & Devices, The operation could not be completed

I keep getting this error when I Save for Web & Devices: The operation could not be completed.
I have saved for the web before for many more complex, larger images without a hitch.
I am using a psd format with an image that I designed. It is no more complex than others I have done. It is small, just a horizontal navbar about the size of the one on Apple's website.
I tried exporting it, flattening it, slicing it removing the slices.
I think it is a problem with the application itself.
I have tried repairing my permissions, restarting, and holding Cmd, Opt, Control, Shift during PS startup to reset the settings. Any insight would be appreciated.

GoodLuck4287-sxcElh wrote:
I think it is a problem with the application itself.
…and yet you don't even tell us what version it is—let alone pertinent details of your machine, OS, etc..
Please read this post by a forum host for advice on how to ask your questions correctly for quicker and better answers: http://forums.adobe.com/thread/375816?tstart=0 Thanks!

IBooks author color shift with "Save for web devices..."

Hi! I'm a web developer and I'm learning to use iBooks. It's a really easy tool, but there is a problem with color management wich is driving me crazy. This happen when I export images from "Save for web devices..." from Photoshop, then drag it to iBooks author.
As I do for web development, I do this:
1) Configure photoshop Color Settings to work with "Color Monitor"
2) Remove any color management from my document
3) Proof Setup > Monitor RGB
4) Disable Proof Colors
5) Use "Save for web devices..." with ICC profile and sRGB unchecked
The exported JPG looks fine everywhere... Photoshop, Preview, Safari, Chrome, FF... but looks washed out when I drag it to iBooks Author. Why?
I solved this issue converting to sRGBIEC61966-2.1 profile and checking ICC profile when "Save for web devices...", but I'm not confortable with this workaround because I'm not sure about what I'm doing exactly, and I am not sure if this images are gonna look good on any device (I only own an iPad 3).
Somebody know a best method to deal with this?
Thanks!

Hi KT. Thanks for your response. I'm already using this formats. Anyway, the problem occurs within iBooks Author interface. I mean: I can see the color shift (or washed out...) at iBooks Author at my computer screen. Of course, when I test it on iPad it also looks bad.
It's incredibly strange because the JPGs I'm using looks fine everywhere else except iBooks Author.

Save for Web & Devices... Illustrator CS4

Similar Messages

Maybe you are looking for