Save Image to Aperture

Hi all.
I can "Save to Iphoto", but there is no "Save to Aperture" when I control-click on a Safari image. Any thoughts out there? Safari 4.0.5 and Aperture 3.0.3.
Cheers.

Hi
I'm using Aperture 3 as well, however, I haven't taken the time yet to sort out some of the inconsistencies etc. For example, I'm not happy I can no longer import directly into Aperture images in my iPhoto database.
Regarding the Safari import, I suggest posting your question to the Flickr Aperture Group. Perhaps, someone has come up with a way to workaround the issue.
Also, provide feedback to Apple via this feedback page. I'll do the same. Seems silly these useful actions disappear, however, progress seems to arrive in very strange packages these days.

Similar Messages

How do I set the desktop wallpaper with an image in aperture 3?

Sorry for the silly question, but I can't find how to set my desktop wallpaper with an image in aperture 3. It was simple when using Iphoto, but I can't find the method in aperture.
Thanks,
Dale.

Command(⌘)-9 is no longer listed in the list of default keyword shortcuts, and it has no effect.
I wrote a little Automator service to bring the Command(⌘)-9 back.
A copy of this service is here for download:
http://dreschler-fischer.de/scripts/SetDesktopPicture.workflow.zip
This service uses three actions:
Aperture: Get selected images
Export Masters
Finder: Set the Desktop Picture
To install it, open the workflow in Automator and save it as service.
To use it, select any image in Aperture, then activate the service from the Aperture menu -> Services, and it will set the master of the selected image as Desktop picture.
If you like, you can assign the Command(⌘)-9 key to the service (in the System Preferences -> Keyboard -> Keyboard Shortcuts Panel) and then turn any image you selected into Desktop wallpaper by simply pressing (⌘)-9.
@Frank Caggiano, if you are still following this thread: for some reason this workflow succeeds with exporting the master, but I could not get it to work with the versions instead. Any ideas?
Caution: this service will clutter the Desktop with the exported images. If you want to avoid that, change the export action to export the image to a different folder.
Regards
Léonie

Is there any way to invert raw images in Aperture.

I am "scanning" a lot of old slides and negatives with a SLR camera using an old professional slide duplicator.
It is very fast and effective with slides and I have tried with negatives. It goes very well except for I have to invert the negative image in Photoshop and even in 16 bit theres at lot less quality left when I save it back in Aperture for the last color correction.
The solution would be to be able to do the inversion from negative to positive image i full raw quality inside Aperture.
Does anyone know if there is at "trick" to invert the raw-image in Aperture?

There is not. Inversion is more a rewrite than an adjustment -- best done between the scan and importing, imho.
See this link for further suggestions:
https://discussions.apple.com/message/12907195#12907195

I have images in aperture and in my picture folder that I want to burn to DVD. I need them to be viewable on pc and possibly via a DVD player. My first attempt proved to work only mac. Can anyone help?

Can anyone help me with burning DVD with images in Aperture and picture folder. I need the to be viewable on pc and DVD player if possible.
My first attempt only works on mac.

Eh la Pastenague! Je savais que tu était léthale pour l'homme mais ce sont pluôt les machines à pommes qui devraient te craindre. Merci! Solved.
For future reference.
My TC is a 3rd gen.
I actually had to reset to standard defaults not only once but twice. The first time I simply returned to my old profile but that only led to the same message error on the network settings (i.e. IP by default, cannot connect to the internet). Therefore the second time around I kept my profile as backup and re-created a new one plus a guest one.
The airport utility then signaled to issues remaining:
1) Internet access was cut - this I solved by simply reseting the cable modem
2) There were no DNS Servers - I simply copied the ones I had from the previous setup and it worked
I did have AppleCare....
I'm online again and I hope for good.
Thanks a lot
PS. a small tip - I made captures of all my settings in Network settings, Airport Utility and Network utility using Grab in case of ... if anything it is just handy to get back settings that your are missing when setting up a new configuration

How do you add a signature to your images in Aperture?

How do you add a signature (ie: jpg my name is) to your images in Aperture? I'd like to put together a look for my images and apply it to the photos. Currently it looks like I have to touch up in Aperture and go to PS3 to add the signature.
Is there a way to do it in Aperture?
Thanks,
glenn

Searched Watermark in Manual
Adding a Watermark at Export
A watermark is a visible graphic overlay that is applied to an image. Photographers often use watermarks to indicate that images are protected by a copyright and discourage others from inappropriately using their images.
You can import a graphics file and add it to your images as a watermark.
To add a watermark image to your exported images:
1 Select the images you want to export.
2 Choose File > Export > Versions (or press Command-Shift-E).
3 In the dialog that appears, choose Edit from the Export Preset pop-up menu.
4 In the Export Presets dialog, select the export preset you want to use to export your images.
5 Select the Show Watermark checkbox.
6 Click the Choose Image button.
7 Select the image you want to use as a watermark, then click Choose.
8 Choose where you want the watermark to appear on the image from the Position
pop-up menu.
9 To adjust the opacity of the watermark, drag the Opacity slider to a new position.
10 If you want the watermark to be scaled in proportion to the image’s output size, select the “Scale watermark” checkbox.
11 When you’re satisfied with how your watermark appears in the watermark preview area, click OK.
12 Navigate to the location where you want the exported images placed.
13 Choose a name format for your exported files from the Name Format pop-up menu.
14 Click Export Versions.
Your files are exported with the watermark you created.
*Tips for Creating High-Quality Watermarks*
Use the following guidelines to create high-quality watermarks for your images:
Â Save your watermark as a .psd (Photoshop) file with a transparent background.
Â Create multiple sizes of your watermark so that you can select the one that is the best match for the output size of the exported image.
Note: If a watermark file is larger than the image you want to export, Aperture
automatically scales the watermark down to fit the image. (Aperture does not scale watermarks up.)
Â After you create a watermark, save it as part of an export preset so you can reuse it as often as you need.

Unable to save images from photoshop

Using the external editor linked to Photoshop CC 2014, images from Aperture show up in Photoshop for editing. But after making changes, and saving the file, Aperture doesn't get updated for any of the changes I made in PS. Any suggestions on how to get edited images back into Aperture? (I am using Mac version 10.9.5 and Aperture 3.5.1)

Your assumption is correct.
The workflow is:
Select Image in Aperture for external editing.
Send Image to external editor via one version of Aperture's "Edit with NameOfExternalEditor" command.
Aperture creates a new Original based on the selected Image and opens specified external editor with the Original loaded.
You make changes to this file in the external editor.
You close this file and select "Save Changes" (or similar) when prompted.
You return to Aperture and find an Image based on the newly-created Original selected. This Image shows the changes you made in the external editor. It is badged with Aperture "Edited externally" badge.
Let's check a couple of things:
- Are you showing all Images in the Aperture Browser?
- Are there any externally-edited Images in the Project after you have completed editing in Photoshop?
For the first, clear any filter you have set for the Browser by clicking the dark-on-light drop-down magnifying glass icon _in_ the Browser search field and selecting "Show All".
For the second, filter for externally edited Images by clicking the dark-on-light magnifying glass icon _next to_ the Browser search field and setting a filter with the Rule "File Type" set to "is", "externally edited".
Report back.

Unable to save images from image preview or photoshop to network drive

Hello,
I have an issue when viewing an image file from image preview or photoshop and saving it to a mapped network drive. When trying to save it to the drive, I am met with the error "You don't have sufficient access privileges". However, I am able to save the image to my desktop THEN place it in my mapped network drive.
This has left me pretty puzzled. Has anyone else run into this issue? It was working fine a couple of months ago, and I thought it might correct itself. The issue remains at large. I am not sure why it would stop working, but still works if I click and drag files to it.

Your assumption is correct.
The workflow is:
Select Image in Aperture for external editing.
Send Image to external editor via one version of Aperture's "Edit with NameOfExternalEditor" command.
Aperture creates a new Original based on the selected Image and opens specified external editor with the Original loaded.
You make changes to this file in the external editor.
You close this file and select "Save Changes" (or similar) when prompted.
You return to Aperture and find an Image based on the newly-created Original selected. This Image shows the changes you made in the external editor. It is badged with Aperture "Edited externally" badge.
Let's check a couple of things:
- Are you showing all Images in the Aperture Browser?
- Are there any externally-edited Images in the Project after you have completed editing in Photoshop?
For the first, clear any filter you have set for the Browser by clicking the dark-on-light drop-down magnifying glass icon _in_ the Browser search field and selecting "Show All".
For the second, filter for externally edited Images by clicking the dark-on-light magnifying glass icon _next to_ the Browser search field and setting a filter with the Rule "File Type" set to "is", "externally edited".
Report back.

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

Please don't post the same question multiple times!

"Save image" button of Camera Raw does not save JPEG with modifications made.

I am using Bridge CC to process my RAW images and make modifications to some JPEG images as well. I have no need to further alter images in Photoshop at the moment, so I do all modifications in Camera Raw. After altering my images, I then press the "save image" button at the left bottom corner of Camera Raw and choose the settings to save in JPEG. However, when I upload these JPEG images to a website or when I email them, the image is uploaded without the modifications I had done! It seems to me that Camera Raw is saving JPEGs the same way it does for RAW images, in a non-destructive manner, only attaching instructions for the images to be displayed properly on Photoshop. But when I save an image in JPEG, I expect the image to be saved entirely with the modifications I made while still keeping the original RAW file. What goes on then? What is Camera Raw doing and how do I get to save a modified image in JPEG with Camera Raw? Would you please explain?
Many thanks for your help,
Beza

Hi,
What version of camera raw and operating system are you using?

Can not view images in Aperture

Mavens!
I was editing images in Aperture 3.5.1 ( latest Mavericks / iMAC) and went to add sharpening using CTRL + S when all the images dissappeared in the viewer.
I can still see the thumbnails - I can export original images etc - I just can't see anything in the viewer - it's grey and blank.
There are NO filters / searches in place (the usual gotcha for hiding images).
Initially I had the feeling I must have mis-queued the keystroke for sharpening and somehow hidden the images in the library. But now I find that all of my libraries have this problem. Aperture will only display thumbnails and nothing in the viewer.
Coudl this be a "delete plist" scenario? Any clues for further invesigation greatly appreacited as I'm stumped.
Ciao
Russ

Hello Kirby
Thank you for yur reply and sorry I have taken so oong to get back to you. We just had a catergory 2 tropical cyclone cross the coast a few km away - been a little pre-occupied.
That said - the problem has gone away.
During the session where it arose I restarted the system twice and the systems persisted - so I am a little mystified.
And again thank you for reminding of the "try new user account" wrinkle - obviously the first step for serious troubleshooting.
Kind regards
Russell

TWO CRITICAL BUGS: 1) File, "Save Page As" and 2) right-click the picture and select "Save Image As", both do not work at all in Firefox 27, 28, and 29!

Note: capitals are used only to highlight important words.
PLEASE, TAKE THESE COMMENTS ON TWO CRITICAL BUGS VERY SERIOUSLY BECAUSE THE BUGS DESCRIBED BELOW ARE SO CRITICAL THAT I CANNOT USE THE LATEST VERSION OF FIREFOX UNLESS THEY DO NOT APPEAR IN THE LATEST VERSION AND THEREFORE I AM FORCED TO REVERT BACK TO FIREFOX 26.
I have Windows 7 64-bit and Firefox 26. I could not install Firefox 27, 28, and 29 due to the persistent presence of the two critical bugs described below. I have 8 GB of RAM and an Intel quad-core processor and a lot of hard disk space available.
I installed Firefox 27 and then Firefox 28 a while back and these two bugs described below were still present and now I have just checked again with Firefox 29 by installing it and yet again, these two bugs described below are present!! UNBELIEVABLE THAT THESE TWO CRITICAL BUGS ARE STILL PRESENT IN FIREFOX 29 WHEN I CLEARLY INFORMED YOU ABOUT THEM IN THE HELP, SUBMIT LINK OF FIREFOX!!
I am forced to revert to Firefox 26!
First, I use Windows 7 64-bit and I always use Firefox with at least 120 tabs opened. BUT I have 8 GB of RAM, an Intel core i7 quad-core processor and more than 1 TB of hard disk space. Consequently, I do not understand why I would have these two critical bugs.
With Firefox 26, I also have at least 120 tabs opened when I start Firefox and I do not have the two critical bugs described below, therefore I do not believe that the number of tabs is the reason of the two critical bugs that are present in Firefox 27, 28, and 29.
---FIRST CRITICAL BUG:
When I open ANY web page and do File, "Save Page As", the window that is supposed to open to locate the folder where I want to save this web page does NOT open at all, even if I wait a long time to see if it opens.
Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
---SECOND CRITICAL BUG:
When I use Google Images, for instance entering model in the search field of Google Images and then pressing enter.
Then I select any picture, open to a new tab this selected picture, then open a new tab by selecting the option View for this picture. Then right-click the picture and select "Save Image As".
Again, the window that is supposed to open to locate the folder where I want to save this picture does NOT open at all, even if I wait a long time to see if it opens.
Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
---THESE TWO CRITICAL BUGS DO NOT APPEAR WHEN I USE INTERNET EXPLORER 11.
I have no idea if you will be able to reproduce these two critical BUGS but I can assure you that they are not present when I use Firefox 26 and they are present when I use Firefox 27, 28, and 29. More, be aware that I have at least 100 tabs opened but I also have this same number of tabs opened in Firefox 26 and yet I do not experience these two critical bugs when I have Firefox 26!
Once again, these two bugs touch at two vital, critical very basic functions of Firefox and therefore I will NOT be able to use any version above 26 if these two bugs are still present, as they are present in Firefox 27, 28, and now 29!!!
Please, make it a priority to solve these two critical bugs. Thanks.
I did read a post related to the same issues “Firefox stops responding when trying to "save page" or "save image" | Firefox Support Forum | Mozilla Support” at https://support.mozilla.org/en-US/questions/991630?esab=a&as=aaq
I am still reading it again to try to figure out exactly what the person did to make his problems be solved, as the post is not clear at all on what solved the problems!
In any case, all the suggestions proposed in this post do not work and I surely cannot do a system restore when it is obvious that the two bugs do not appear in Internet Explorer.

First, I sent an email to the author of PhotoME to inform him of the serious issues his addon caused with Firefox latest versions.
Now, for those of you who do not have the PhotoME addon and yet experience the same problem that I had and that I described above, I suggest the following strategy.
As PhotoME did cause these problems with Firefox latest versions, I am pretty covinved other addons probably might cause these problems too. Therefore, adopt the following method.
Test one addon at a time to see if this particular addon is behind your Firefox issues like the ones I had.
So, disable one addon only at a time. Then close your Firefox and restart it from scratch and see if you still have your Firefox problems. You must restart the Firefox browser from scratch. If you still have these Firefox problems, re-enable the disabled addon, restart your Firefox (again!) and repeat the same method for every single addon that you have.
Try to be selective by choosing first addons that are more likely to cause your Firefox problems such as not very well-known or not very popular addons (like it was the case for the PhotoME addon).
If this method works or if it does not work, report it on this web page so that others can be helped with your comments.
I hope this method will help you because I was really upset that I had these Firefox problems and I first thought it was the fault of Firefox, only to discover later that this PhotoME addon was the culprit and had caused me such upset.

Firefox saves images to wrong location, but only when using "View Image"

For a while, I have had the problem above. I can save images just fine if I don't use the "view image" function first, with the images going to the intended folders.
Just to clarify, unlike some of similar problems I have seen described here, I am perfectly happy with Firefox remembering where I wish my pictures to go, on a site to site, or model to model (within the same site) basis.
The problem lies in that if I use the "view image" function, either in a new tab, or in the existing one, Firefox will often prompt me to save in a random folder where I have previously saved a picture. It will even suggest folders that I have not accessed for days.
Example:
I save image A to folder A, by right clicking the image and selecting "save image as".
I then (immediately after this), right click image A again, select "view image", then right click the resulting picture, and select "save image as". Now there is a fine chance that it want me to save the image to some other (previously used) image folder, even if I have not used the folder for a while, and even though I have just saved the same image to folder A.
This problem persists with multiple image file types, on multiple sites (I just tried it with someones avatar in this forum, and it wanted me to put it with my holiday pictures from 3 weeks ago).
I appreciate any assistance you can give - jinxie
FYI; If I "one-click" a file (like an mp4) to download it, it goes to my main / default download folder as normal.

This is because Firefox will track where you have saved images or other files from the website domain. Then whenever you select to save the file to your computer, Firefox will start the Save As wizard in the latest folder that you have used last time.
Here is an example:<br>
If you save an image from the domain <code>123.com</code> into the folder <code>123</code> it will save there. Then you save an image from the domain <code>456.com</code> to the folder <code>456</code>. Next you save a different image from the domain <code>123.com</code>. The save as wizard will assume that you want to save it with the other image from that domain and will automatically start in the <code>123</code> folder.<br>
This can make saving files faster and more organized, however not everyone wants this feature enabled.
To disable this feature you can do the following:
#Go to <code>about:config</code> in Firefox
#Locate the <code>browser.download.lastDir.savePerSite</code> string
#Change the value to <code>false</code>
This should fix the issue, but please report back if it doesn't.

Downloading images used to go automatically to the last folder used to save images, even when reopening Firefox. In just the past few days, possibly coinciding wih the most recent updates, the folder defaults to the 'Downloads' folder. This is most annoyi

Downloading images used to go automatically to the last folder used to save images, even when reopening Firefox. In just the past few days, possibly coinciding wih the most recent updates, the folder defaults to the 'Downloads' folder. This is most annoying. What happened? Internet Explorer 8.0 did the same thing. This was one of the reasons why I started using Firefox to download all images. I went into Tools>Options and it only lets me set another folder. I dont want to set a specific folder I want it to always go to the last folder used. So what gives?
== This happened ==
Every time Firefox opened
== possibly when the most recent updates were installed, a few days ago

Thanks jscher 2000. I guess I didn't make it clear. "It restarts with all the addons activated, and resumes with the tabs that were open before closing it." IE, it's running fine now with all the extensions activated. Everything is OK now.
So something in the Firefox code was causing the bad behavior. It's not essential that I find out what the problem was - I'm just curious. And if anybody else has this same problem, it might be nice to have it corrected at the source.

Right click - save image keeps saving to wrong location

I moved my firefox profile over from my old computer.
Now when i do right click -> save image as, it SOMETIMES defaults to C:\Users\test\Documents. Which was my old default location.
I have changed it to C:\Users\Question\Documents on my current computer but it randomly changes back to C:\Users\test\Documents. I cannot find a pattern that causes it to change, but it seems to happen mainly after i restart my computer (not always though).
Can someone please tell me how to get it to change to C:\Users\Question\Documents PERMANENTLY?

Oh right i forgot the first answer to every problem is "reinstall firefox".
Does anyone have a suggestion that does not involve reinstalling firefox and wiping my profile?

Firefox 32 hangs on "Save Image" dialogue box Windows 8.1..Tried everything

I clean installed windows 8.1..
then installed all latest drivers for my devices...
installed latest Firefox..
Then i needed some images ..so opened Google image search and searched images..opened one image in a New Tab.. clicked "View Image" and tried saving it by right clicking and selecting "Save Image"..
First it took a lot of time for the "Save Image" window to appear..
and then it hanged...
I tried doing it again by force closing and re-opening firefox..but same thing happened even if the Image is small like 100X100 pixels..
Then I opened the mozilla support questions and tried the following solutions some other users have suggested;
1: Opened FIrefox in safe mode (Same thing happens)
2: Disabled addons (Only addons i had was flash downloader and downthemall! - Same thing happens)
3: Reset Firefox (No use)
4: Disabled Hardware Acceleration (No Use - In fact firefox hangs as soon as I "View Image")
4: reinstalled Firefox (No Use)
5: Uninstalled my ATI Radeon display drivers (No Use)
6: Disabled JAVA and Flash (No Use)
So this problem still persists....and its quite annoying
Another thing I have noticed is when i try to save/download other files like mp3 or email attachment or pdf .. The window where it shows whether to Open or Save the file opens immediately..but takes around 15 seconds before I can actually Select and option and click Ok.

SOLVED - Atleast for Now....
So I think I have found the solution to this problem...
I reinstalled windows 8.1...
Then did 2 things..
1: Disabled Skydrive from Group Policy Editor and selected Always save files to local drive.
2: Disabled Bing Search from local file search (Windows Key + C-> Settings->Search and Apps->Search)
Installed Firefox..
and Now I don't have the problem...
I am going to install java, Flash and Addons ..and check again if the same problem occurs again..
Will update what happens..

Save Image to Aperture

Similar Messages

Maybe you are looking for