Save in Editable ALV using OO

Dear Gurus ,
I made an ALV to be editable using OO but i can't save .
I read the articles here but i can't understand very well .
Does anyone has the code for save only ....
Thanks ..

Hi,
Please refer How to capture user entered values from an input enabled ALV grid?
Regards
Marcin

Similar Messages

Editable alv using checkboxes.

Hi All,
I am working on editable alv using checkboxes.I have few requirements.
1) i have all checkboxes in my row.If i select the Row fieldname all of my checkboxes hsould be checked.
2) in my internsl table i have field called comments.If comment field has space i need to disable the checkbox.If comment is filled then i need to enable the chekkbox.
Field catalog need to be changed based on my internal table.
Can anybody please let me know how can i solve the above issues.
Thanks
Swapna.

1. There is no event for this (row of column), so this will not be possible.
2. Check report BCALV_EDIT_05.

How to save the editable alv data to another program ?

hi friends,
please solve this issue..
i have one editable alv grid report. after edit my data in the grid..
i want to
            save those data (edited data )or
            download those data into another internal table or
            pass those data as input to another report program..
how can i do this ?

The form switch to edit mode could be :
form p_edit.
data : is_fieldcatalog type lvc_s_fcat ,
         it_ucomm        type table of syucomm with header line ,
         v_ucomm         type syucomm.
* Switch Edit <-> Display
loop at it_fieldcatalog into is_fieldcatalog.
    check is_fieldcatalog-fieldname ne 'NUM' and
          is_fieldcatalog-fieldname ne 'RCODE'.
    if is_fieldcatalog-edit eq 'X'.
      clear is_fieldcatalog-edit.
    else.
      move 'X' to is_fieldcatalog-edit.
    endif.
    modify it_fieldcatalog from is_fieldcatalog.
endloop.
* Change the status of the grid.
if is_fieldcatalog-edit eq space.
    move '&REFRESH' to v_ucomm.
    call method obj_grid->set_function_code
         changing c_ucomm = v_ucomm.
    call method obj_grid->set_ready_for_input
         exporting i_ready_for_input = '0'.
else.
    call method obj_grid->set_ready_for_input
         exporting i_ready_for_input = '1'.
endif.
* Modify the fieldcatalog.
call method obj_grid->set_frontend_fieldcatalog
       exporting it_fieldcatalog = it_fieldcatalog.
* Refresh the display of the grid.
call method obj_grid->refresh_table_display.
* Set the column lines number.
perform p_set_lines_num.
* Clear the flag control.
clear v_flag_control.
* Messages.
if is_fieldcatalog-edit eq space.
    move 'Passage en mode affichage.' to v_buff.
    perform p_add_message
            using v_buff
                  'ICON_DISPLAY'
else.
    move 'Passage en mode édition.' to v_buff.
    perform p_add_message
            using v_buff
                  'ICON_CHANGE'
endif.
* Inactiv function.
if is_fieldcatalog-edit eq space.
    set pf-status '100'.
else.
    move '' to it_ucomm. append it_ucomm.
    set pf-status '100' excluding it_ucomm.
endif.
endform.                     " P_EDIT.
and for the table:
data : w_id(60).
move 'ZTOTO' to w_id.
export it_table[] to memory id w_id.
in the other program, it's the same with the IMPORT instead of export.

Editable alv using OO ALV(newly edited row values are not updating )

Hi friends,
i am facing a problem. i am displaying an output alv using OO ALV.
i am creating a new row and validating the newly created row values and changing if it is not according to the criteria. but the newly edited values are not capturing in method
pr_data_changed->mt_inserted_rows as it contains values only entries entered for the first time .
i am not getting the newly edited values in it.
please do the needful.
Thanks and Regards,
srinivas

Hi!
to rectify the problem in the Code.....
You can Go through this program....for changed values....
https://wiki.sdn.sap.com/wiki/x/AwBIBQ
Regards.

Editable ALV using OO concept

Hi Experts,
We have a requirement for an editable ALV grid where the values can be changed in the ALV and needs to be validated.
Once the user has made an entry in the ALV grid,
Even if the user has entered values in all the cells, It should throw error log only for the rows selected by the user .
Once the user has made correct entry in the field ( the row which was selected earlier and throwing error ), then the error log should be emptied and it should allow for processing.
Please help us on this requirement, if possible with the code.
Thanks in Advance,
Vidya
Edited by: vidya vidya on Oct 16, 2009 8:30 AM

Hi,
in the wiki (code gallery) you can find several examples.
e.g.
http://wiki.sdn.sap.com/wiki/display/ABAP/InteractiveEditableOOALVgridwithdynamicitab,FCATandENTERkeyeventtrigger
Best regards.

Issue with editable alv using cl_gui_alv_grid

Hello all,
its a table update program . user can save create new entry and delete the entires . the screen should be avaiable for multiple time inputs by the user . i achived it by method handle double click and i am refreshing the scrren and making the alv for ready for input . but user wants the screen shoukld get refreshed automatically once user clicks on save button .
how can I achive plz advise .
I am working on ALV by cl_gui_alv_grid , I am using the followingmethods of the class
1) METHODS: handle_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
              IMPORTING e_object e_interactive.
2)     METHODS:     handle_user_command FOR EVENT
                 user_command OF cl_gui_alv_grid
                 IMPORTING e_ucomm,
                 check_changed_data.
3)     METHODS:      handle_double_click FOR EVENT
                  double_click OF cl_gui_alv_grid
                  IMPORTING e_row e_column.
4)    METHODS: handle_data_changed
              FOR EVENT data_changed OF cl_gui_alv_grid
              IMPORTING er_data_changed.
Thanks in advance .

Hi Soumyaprakash,
SAve is an user command . I want to have the values which are changed by the user and again the output should be ready for any actions like change the data , create new and delete any entry .
basically the alv output screen should be reday for inputs any number of times untill user clicks on back button .
Thanks
Basavaraj

Editable ALV using FM REUSE_ALV_GRID_DISPLAY_LVC.

Hi Friends,
I have ALV with editable field and I am using FM REUSE_ALV_GRID_DISPLAY_LVC.
In this case I am unable to get data enter in editable column.
I have customize PF - STATUS for ALV.
Please guide me to resolve.
Thanks

hi amit,
check this method...it records the changes done ....
CALL METHOD ref_grid->check_changed_data .
hope it helps..
regards,
somesh
Edited by: someshuttarwar on Nov 29, 2011 1:14 PM

Editable ALV Using SALV Class.

Hi Experts,
I need to make ALV Editable using SALV Class only.
Thanks in Advance
Regards,
Ankit.
Moderator message: please do some research before asking.
Edited by: Thomas Zloch on Feb 25, 2011 1:47 PM

Hi Aniket,
This is a restriction and not provided in SALV class.
Please have look at the earlier posts in SCN .
Thanks.

How to save the edited datagrid using array collection?

<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
                    xmlns:s="library://ns.adobe.com/flex/spark"
                    xmlns:mx="library://ns.adobe.com/flex/mx"
                    title="demo2">
          <fx:Declarations>
                    
          </fx:Declarations>
          <fx:Script>
                    <![CDATA[
                              import mx.collections.ArrayCollection;
                              import mx.events.FlexEvent;
                              import spark.components.gridClasses.IGridItemEditor;
                              import spark.components.gridClasses.IGridItemRenderer;
                              import spark.events.GridItemEditorEvent;
                              [Bindable]
                              private var myDP:ArrayCollection = new ArrayCollection([
                                        {label1:"Day1 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "},
                                        {label1:"Day2 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "},
                                        {label1:"Day3 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "},
                                        {label1:"Day4 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "},
                                        {label1:"Day5 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "},
                                        {label1:"Day6 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "}
                              protected function myDG_gridItemEditorSessionSaveHandler(event:GridItemEditorEvent):void
                                        // TODO Auto-generated method stub
                              protected function button1_clickHandler(event:MouseEvent):void
                                        // TODO Auto-generated method stub
                                        navigator.popView();
                              protected function button2_clickHandler(event:MouseEvent):void
                                        // TODO Auto-generated method stub
                                        myDG.editable=false;
                                        myDP
                              protected function myDG_exitStateHandler(event:FlexEvent):void
                                        // TODO Auto-generated method stub
                    ]]>
          </fx:Script>
          <s:DataGrid id="myDG" x="10" y="45" width="460" height="240" dataProvider="{myDP}"
                                        editable="true" exitState="myDG_exitStateHandler(event)" fontSize="11"
                                        gridItemEditorSessionSave="myDG_gridItemEditorSessionSaveHandler(even t)"
                                        rowHeight="30" variableRowHeight="true" selectionMode="singleCell" >
                    <s:columns>
                              <s:ArrayList>
                                        <s:GridColumn dataField="label1" headerText="day" editable="false" />
                                        <s:GridColumn dataField="label2" headerText="9-10am"/>
                                        <s:GridColumn dataField="label3" headerText="10-11am"/>
                                        <s:GridColumn dataField="label4" headerText="11am-12noon"/>
                                        <s:GridColumn dataField="label5" headerText="1-2pm"/>
                                        <s:GridColumn dataField="label6" headerText="2-3pm"/>
                                        <s:GridColumn dataField="label7" headerText="3-4pm"/>
                              </s:ArrayList>
                    </s:columns >
          </s:DataGrid>
          <s:Button x="404" y="10" width="53" height="27" label="Back" click="button1_clickHandler(event)"
                                fontSize="13"/>
          <s:Button x="24" y="10" width="56" height="27" label="Save" click="button2_clickHandler(event)"
                                fontSize="14"/>
</s:View>
please help me with this code...i dontknow how to save the data edited in the datagrid back to my arrayollection!!!

please help with this......

[Editable ALV] Using deep context

Hi,
I am using a deep context (I have subnodes in my context that are not shown on the ALV). I use the subnodes to display list of data that I called from a button in the ALV, thus it makes sense (at least to me) to have it there in the context.
When using subnodes, you have to be careful when you modify your context, do not use BIND_TABLE to fill your context because it will simply get rid of those subnodes. Go through all of your elements and use BIND_ELEMENT instead.
Everything was working fine until... I tried to sort one of the columns. It actually messes up with my context by deleting these subnodes!
I guess it is using the BIND_TABLE method somewhere.
Have you guys crossed this problem?
Is there a "clever" solution to this? (a naive one would be to simply use a concatenation of all subnodes values and re-build the subnodes every so often).
Thanks in advance.
Best regards,
Guillaume

1. There is no event for this (row of column), so this will not be possible.
2. Check report BCALV_EDIT_05.

Enable User Defined toolbar button on click - editable alv grid using oops

Hi all,
I have created editable alv using oops concept.
created 2 user defined toolbar button save and print using method toolbar
ls_toolbar-text      = 'Print'.                         "#EC NOTEXT
    ls_toolbar-quickinfo = space.
    ls_toolbar-checked   = space.
    APPEND ls_toolbar TO e_object->mt_toolbar.
requirement is
initially print button should be disabled, and save enabled
when i click save button, print button should be enabled.
I want coding in editable alv oops concept
kindly help
regards
senthil kumar

Halo Senthil,
You should call set_toolbar_interactive method of cl_gui_alv_grid in the on_user_command( ie the event handler for event user command) .
method on_user_command.
case e_ucomm.
when 'SAVE'. or whatever your function code is .
my_save_flag = 'X'.
call method grid->set_toolbar_interactive.
endmethod.
This triggers the toolbar event of the
cl_gui_alv_grid. Inside the eventhandler method ( ie the on_toolbar method ) you should set the toolbar.
if my_save_flag = 'X'.
read table e_object->mt_toolbar
clear l_toolbar-disabled.
modify e_object->mt_toolbar.
endif.
e_ucomm will not have the function code if the save button is not in the toolbar area.
then you can set the my_save_flag in the data_changed event handler of the Cl_gui_alv_grid.
Regards
Arshad

Get data in editable ALV back to internal table without data_changed ev?

Hi,
I have an editable ALV using classes to whch I have users the option to edit directly on the screen or upload data from an excel. The event data_changed gets triggered when users edit the table on the screen.
However when EXCEL is uploaded, I refresh the table display. So, I need a way to get the data from the ALV into a internal table to check which rows were update using the excel and save them into the db table.
Prakash

Hi!
For more information, inspect programs suiting the mask "BCALVEDIT*" and the thread with header "How to make a row of ALV editable " (I know this is some more steps further from your demand but it may be useful) at URL " How to make a row of ALV editable " .
If you want to study more BC412 "EnjoySAP Controls" may help you.
*--Serdar

Update out_tab data in editable ALV

Hi,
I am working on editable ALV using oops. I want to insert the data into database tables after user insert the data in ALV based on the application tool bar button action.
How to refresh the data in out_tab, If user click the application tool bar button then I need to save the ALV grid data in database table.
Please give me the valuable suggestions.
- Rayudu

solved my self

Editable ALV: value transport before event handling

Hi everybody,
I'm really going crazy over this one: I'm developing an editable ALV using CL_GUI_ALV_GRID and I'm trying to check the entered data both on pressing enter and on pressing SAVE.
Since I want to use the error log protocol I'm doing all of these check in the data_changed event handling. Now this is where it gets tricky: When a user enters a value and presses the SAVE button without pressing enter first, the following code is executed:
CALL METHOD GOB_D1100_ALV02_GRID->CHECK_CHANGED_DATA
So since I registered the data_changed event, will trigger the event handling BEFORE transporting the value from the GUI to the internal table. The value is only transfered after the data_changed event (where I want to make my checks because of the error protocol) is executed.
How do I get my internal table updated before event handling?
Best wishes,
Ben

YEHAW! I found a solution to my problem in this thread: editable alv: add custom validation and display "errors" in protocol list
What you need to do is change your internal table yourself accordingly to the changes that you did on the ALV GRID.
You can find the modified rows in table MP_MOD_ROWS of object P_ER_DATA_CHANGED.
Then all you need to do is modify your internal table accordingly. Works like a charm (:
FORM ALV_EVENT_DATA_CHANGED USING P_ER_DATA_CHANGED TYPE REF TO CL_ALV_CHANGED_DATA_PROTOCOL
                                                                          P_SENDER.
DATA: LTA_MOD_CELLS TYPE LVC_T_MODI.
DATA: LST_MOD_CELLS TYPE LVC_S_MODI.
FIELD-SYMBOLS: <LFS_MOD_ROWS> TYPE TABLE.
LOOP AT P_ER_DATA_CHANGED->MT_MOD_CELLS INTO LST_MOD_CELLS.
    ASSIGN P_ER_DATA_CHANGED->MP_MOD_ROWS->* TO <LFS_MOD_ROWS>.
    READ TABLE <LFS_MOD_ROWS> ASSIGNING <FS_D1100_ALV02_DATA> INDEX LST_MOD_CELLS-TABIX.
    MODIFY GTA_D1100_ALV02_DATA FROM <FS_D1100_ALV02_DATA> INDEX LST_MOD_CELLS-ROW_ID.
ENDLOOP.
Thank you very much for your assitance
Ben

Search help for date field in Editable ALV

Hello Friends,
I am using editable alv using 'reuse_* '.
I have used date as input field. While creating fieldcatlog also i have declared dat as a mkpf-budat.
But i am not getting serach help for date in output.
Is it possible with reuse or i have to go by object oriented ?

Hi,
Just pass the Edit option of the fieldcatalog for those specific fields...
fcat-edit = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = sy-cprog
      i_callback_pf_status_set = 'PF_STATUS_SET'
      i_callback_user_command = 'USER_COMMAND'    "<---- pass this
      i_callback_top_of_page   = 'TOP'
      is_layout                = it_layout
      it_fieldcat              = it_fcat
      i_default                = 'X'
      i_save                   = 'A'
      it_events                = it_event
    TABLES
      t_outtab                 = it_final
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
*&      Form USER_COMMAND
*       text
*      -->R_UCOMM      text
*      -->RS_SELFIELD text
FORM user_command USING r_ucomm LIKE sy-ucomm
                        rs_selfield TYPE slis_selfield.
CASE r_ucomm.
    WHEN '&DATA_SAVE'.                "<-------check this
      PERFORM save_data.
ENDCASE.
ENDFORM.                    "USER_COMMAND

Save in Editable ALV using OO

Similar Messages

Maybe you are looking for