Save layout in VA05

Hi All,
I want to save my own layout in VA05, but unable to do the same because when i go to the layouts in settings, "Save" option is Greyed out.
Can you please tell me how i can save my own layout in VA05.
Thanks,

Keep the value A to SD_VARIANT_MAINTAIN  in SU01->parameters tab and save.
Then log-out and again log-in and try.
Regards,

Similar Messages

  • HOW TO ACTIVATE SAVE LAYOUT OPTION IN VA05 T CODE

    Dear Genios,
    i am facing probel to activate the save layout option in any sap standard reports.
    I want to create & save a layout in standard report va05.
    please help me for the same.
    Regards
    Rabin Nayak

    Go to SU01/SU3 ( to ur ID) select parameters tab and then scrol down and press F4 select SD_VARIANT_MAINTAIN and in the next field select A or X then try it will allow u to save ur own variant.(the save icon come to screen variant selection screen)
    More on this:
    By default, SAP user can't save report layout in some SAP SD t-code such as: VA05 and SDO1. The 'save' menu will be grey. But, you actually can save the layout by adding a parameter in your SAP user profile. You do that with t-code: SU3. Go to 'parameters' tab and add new parameter id, which is: SD_VARIANT_MAINTAIN'. The parameter value for that is 'A'. Then save your user profile and try again to save layout in VA05 or SDO1 t-code.
    Regards,
    Sanjeev

  • VA05 :  Save Layout Option is deactive..

    Greetings..
                     In T code VA05.....i need to set the user specific menu .....
    in my case Save Option is not available when i chose field ...
    How to save the layout in VA05..as Save option is not avaialble......

    Hi,
    try with the above 3 guys telling that is absolutely correct.  go to SU01/SU3 ( to ur ID) select parameters tab and then scrol down and press F4 select SD_VARIANT_MAINTAIN and in the next field select A or X then try it will allow u to save ur own variant.(the save icon come to screen variant selection screen)
    rebgards,
    sk
    Edited by: Sadanandam Kasarla on Mar 16, 2009 9:02 AM
    Edited by: Sadanandam Kasarla on Mar 16, 2009 9:03 AM
    Edited by: Sadanandam Kasarla on Mar 16, 2009 9:06 AM

  • Enabling User Specific check box while saving layout in VA05

    Dear All,
    While saving layout in VA05 user specific check box is in disabled mode , is there any possibility to enable the check so that i can create user wise layouts in VA05.
    Regards,
    Prasad

    Hi,
    Goto SU3, enter user name and press enter
    goto parameters tab, enter parameter ID SD_VARIANT_MAINTAIN and parameter value 'A' and save.
    Now check in VA05, you will get save button in active mode.
    Regards,
    Hrishi

  • IN ALV Report 'SAVE LAYOUT' option missing

    Dear All,
                 I have created one report in ALV GRID using ABAP OBJECTS(Using class CL_GUI_CUSTOM_CONTAINER and
    CL_GUI_ALV_GRID).But in output when i click on change layout option i am not getting SAVE layout option.
    I have already passed I_SAVE parameter = 'A' while calling metod SET_TABLE_FOR_FIRST_DISPLAY. But i didnt worked.
               Please do needful.
    Regards,
    Mayank

    Hi,
    You can manage display variants by using parameters, “is_variant” and “i_save” of “set_table_for_first_display”. Here are options for variant handling. <structure_name> is the variant-defining structure of type “DISVARIANT”. The field “report” in this structure should contain the value of “sy-repid.”
    Hope this helps. Reward points if helpful.
    Thanks,
    Balaji

  • Error while trying to save layout:Console layout (Access is denied)

    Got an error while trying to save changes made in the layout,
    The error message is
    1) 'Preference.properties' (Access is denied), In the details button 'java.io.FileNotFoundException...'
    2) and on continuing futher, another message displayed is - 'Error while trying to save layout:Console layout (Access is denied)
    There is no Oracle Error Number associated with this message. It is a Oracle Warehouse Builder Error
    I have checked that
    1) this file exist in owb home/owb/bin/admin/Preference.properties
    2) It is not read only
    3) tried to set a parameter REPOS_DB_VERSION_ALLOWED=Oracle 10g
    as specified in the Installation and Admin Guide
    Please can you help?

    Also, not that you shouldn't get to the bottom of this, but you should be aware that any of your development or mapping changes are likely still being saved to the respository.
    In other words, you could continue working and just ignore these errors. We ran into this situation (it was indeed simply file permissions on the owb directories), but we noticed right away that at least our actual OWB work was in fact still being committed to the respository every time.

  • Standard Report not Displaying 'SAVE LAYOUT' Option

    Dear All,
    Using Tcode VF44, i am getting output list.But in that list when i click on select layout option from toolbar its not displaying 'save layout' Option. can anybody give me soln for the same.How can i get that option?
    Regards,
    Mayank

    hi ,
    it depends on the user parameters.
    U have to identify the parameter id and u have to activate it in user maintainance partameters .
    su01 -> parameters.
    ex .  parameter id ->  SD_VARIANT_MAINTAIN -> X
    so u can save layout now.
    regards,
    manikandan

  • Select layout & save layout button missing in the toolbar

    Hi guys,
    I've just developed my first ALV using ABAP objects, but the tollbat doesn't contain buttons select &save layout.
    what could be worng?
    Thanks a lot!
    olian

    Look at ALV display variant related parameters
    - is_variant Don't forget to give the report name is_variant-report = sy-repid before calling set_table_for_first_display.
    - is_save Give to is_save a value allowing to save variant to get the save icon. (X-standard, A-all, U-user variants, not space)
    (Also take a look at [ALV Gird Control (BC-SRV-ALE)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVALV/BCSRVALV.pdf])
    Regards

  • Z ALV with Default Setting in save layout option disabled

    Hi friends! I need a little help. I have a Z ALV and we trying to save layout, but the option "Default Setting" is grey and I cannot use this. How can I enable this option in save layout?
    Thanks!!

    hi,
              there is a field  in the FM REUSE_ALV_GRID_DISPLAY HAVE export parameters "I_SAVE"   PASS  'X' to it. I think it will work.
    regards,
    Edited by: ZAHID HAMEED on Oct 26, 2011 10:41 PM

  • Save layout option for FITRV_PRINT_TABLE_CONTROL_DATA

    Hello,
    I need to print table control data ,for this am using FITRV_PRINT_TABLE_CONTROL_DATA
    My requirement is now to have the option to save the layout which is generated after calling this function module.
    currently 'save layout' is not shown in the pf status and is disabled in the menu. only change layout is enabled which cannot be saved.
    1. Can we enable the save layout inside this list generated by fm.if yes how.
    2. can we have custom buttons inside the list generated using this fm.if yes how.
    3. Copying fm and convert to Z can do it I guess but I want to check if there is any option with the existing standard fm .
    4. Is it better to remove this fm and generate a new alv list  for the table control. which option is better.
    Thank you.
    Best Regards,
    Abhilash

    Hi,
    Use the below function module
    FITRV_PRINT_TABLE_CONTROL_DATA
    Regards
    Sudheer

  • Save layout option for Block Alv

    Hi,
    Small Question,
    Is there any way to enable Save layout(Ctrl+F10) option for Block ALV?As i cannot see any option to do so with Reuse_*Block like i_save in Grid and For list ALVs...FM.And its by default it is Disable.
    Any Hints?
    Cheers,
    Amit.

    That's what i already investigated(Small).
    wanted Just to confirm.Anyways thanks.
    @Gautham:I already found that link([And this also |/message/702997#702997 [original link is broken];) but thought After 2 and
    half yrs Vijay found any solution and would land with any solution as always
    Anyways Thanks Vijay And Gautham.
    Cheers,
    Amit.

  • 'Save layout' button missing in the ALV report layout screen

    Hi Friends,
         In one of our ALV report the 'save layout' button is missing in the report output screen.i have used the OO concept for creating the ALV output and not the function module.I have attached the code below used for creating the ALV grid.
    CREATE OBJECT alv_grid
          EXPORTING i_parent = g_container_2.
    CALL METHOD alv_grid->set_table_for_first_display
         exporting
                   i_structure_name = 'PA0002'
                   is_layout =
           CHANGING
                     it_outtab = gt_outtab
                     it_fieldcatalog = wa_fieldcat.
    But i'm not able to trace why the 'save layout' button is missing in the output.Can anyone of you help me in sorting out this problem.
    Thanks and Regards,
    Vadivel.

    Pass <u><i><b>A to I_SAVE</b></i></u> parameter. That will give the options to the user to save the layout outs.
    I_SAVE = SPACE
    Layouts cannot be saved.
    I_SAVE = 'U'
    Only user-defined layouts can be saved.
    I_SAVE = 'X'
    Only global layouts can be saved.
    I_SAVE = 'A'
    Both user-defined and global layouts can be saved.
    Regards,
    Ravi
    Note : Please mark all the helpful answers
    Message was edited by: Ravikumar Allampallam

  • SAVE Layout Option in ALV list Report

    Hi Experts,
    Is it possible to SAVE the layout option for Block ALV list Reports?
    Thanks in Advance,
    Sivak.

    Hi,
    It is not possible to save layout in BLock ALV display but possible to change layout. There is no parameter to save. It is not possible to store the layout as it has several structure.
    Thanks & Regards
    Rocky

  • IMR7 : Creation of a new Screen Variant does not save Layout

    Hello,
    In IMR7, if I create a new screen Variant with a modified the default Layout field, the next time I log-in to SAP, system does not recognize my Layout selection.
    Do you have a suggestion?
    Thanks
    François

    Hello,
    Thanks for your support but it did not resolved my problem.
    When I save Layout I  have three fields:
    -Layout name
    -User-specific checkbox
    -Description
    Even though User-specific is not checked, next time I relog to SAP and choose my Variant, the layout I have chosen in this variant is not keeped in memory. A layout named 4_SAP_IM is always displayed.
    Do you have the same behavior?
    Thanks
    François

  • How to enable the SAVE LAYOUT button?

    When using CALL METHOD G_ALVGRID_HDR->SET_TABLE_FOR_FIRST_DISPLAY, how do I enable the SAVE LAYOUT push button?
    It shows the Change layout button but does not allow me to save the layout as the SAVE LAYOUT button is not available.
    I am using the following code but it does not show the SAVE LAYOUT button.
      CALL METHOD G_ALVGRID_HDR->SET_TABLE_FOR_FIRST_DISPLAY
        EXPORTING
          I_SAVE                        = L_SAVE
          IS_VARIANT                    = LS_VARIANT
          IS_LAYOUT                     = LS_LAYOUT
          IS_PRINT                      = LS_PRINT
          IT_TOOLBAR_EXCLUDING          = I_EXCLUDE
        CHANGING
          IT_SORT                       = I_SORT_HDR
          IT_OUTTAB                     = I_OUTTAB_HDR[]
          IT_FIELDCATALOG               = I_FCAT_HDR
        EXCEPTIONS
          INVALID_PARAMETER_COMBINATION = 1
          PROGRAM_ERROR                 = 2
          OTHERS                        = 3.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                   WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Pl advise.
    Thanks,
    Ven

    pass the variant and enable is_save = 'A'.
    in my case I had to upgrade the gui also.

Maybe you are looking for

  • 2 phones on same account.. Please help!

    My daughter and I both use my laptop for Itunes and we just updated her phone to the new software and when Icloud asked for Apple ID of course we entered mine which is the only one we have. Previously when we synced our phones her contacts and mine w

  • HELP!!!...ROLL OVER...PICTURE...ETC...HELP

    HELP!!!! Sorry, I'm in a hurry, I need to get what I will explain in a sec done ASAP for my project!!! So I hope you can help!! I have been making a calendar for my project in Flash CS5. On my calendar I have the days of the months, which are buttons

  • Picking status/putaway status & Status of warehouse management activities

    Hi experts. I have a question but first let me explain the process. 1) I have a Delivery document and its corresponding transfer order (TO) and the TO is not confirmed and the following status at level item into the delivery are Picking status/puaway

  • Scan to email blues...

    When I attept to scan to email on my all in one printer, it tells me there is no email associated with the printer. How, oh how, do I associate an email adress with it. Have been over, and over my settings, and have found nothing. Thanks in advance f

  • Importing other package java classes

    I am doing a webapp using Tomcat .I have some classes which i want to use in another webapp.I did set the PATH variable to point to the my first webapp classes directory .But it is still not bale to locate the classes. Does anyone have any idea.