Save me from going back to Protools! Logic Express 8.0 will not install :(
Hello fellow Mac users ...
I have been using PT LE for a bit and wanted to try out logic so got express 8 (highest that will work on G5) and have been trying to install that sucker for the last few weeks. Thought it was a bad disc, Apple sent me a new one etc... I have done a disc reformat even zeroing it out to clear everything! What happens is the install gets to Ultrabeat portion of install and gets to about 50-70% then states installation fails! What possible issues could there be if there is no other software etc. to conflict with etc. Perspiring and definitely not inspiring Hopefully someone has had this issue or may have some ideas ... Peace and thank you! John
Thanks for your responses. Here is what I have done since my last post.
Ran the HD utility, verified and repaired permissions, reloaded OSX, got different Express Discs from Apple, created an image file and tried to load it that way ... STILL FAILS!. Any other application loads such as PT or Superior Drummer but Logic will not. Maybe my G5 has some hardware issue or some higher force doesn't want me to use Logic. Other suggestions are appreciated but I am pretty mentally drained at this point and may just live with PT until I someday upgrade to an Intel Mac. Peace and thanks!
Similar Messages
-
Hi,
As I have said in the title, I was supposed to do a restore on my iPad for work. I backed up the device and then I restored it to factory settings as I was instructed. Now that all of that is complete, I tried to restore it from the back up point I created and it will not recognize my Apple ID password. I really hope that I won't lose all of my data, but I don't know what else to do. I have tried entering my password numerous times. I really hope that someone can help me.Restoring an iPad from an iTunes-generated backup should not require an Apple ID password.
Did you encrypt the iPad backup? If so, then trying to restore will require entering the encryption password. -
Save a Switcher from Going Back to a PC Tonight!
I've been using PCs for as long as I can remember. With parallels available to run Windows XP within OS X, I finally made the switch and bought an MBP. Two weeks and one exchange later, I'm planning to return my MBP tonight and buy a VAIO SZ or Thinkpad.
But the truth is, I'm hoping someone on this forum can save me from going back to a PC. I've posted individually on some of these issues below, but haven't read any solutions. If you've got a solution to any of the following, please let me know!
- HOT HOT HOT: This is my biggest problem. Completely idle w/ no programs open = 48C. Running a few apps = 60-65C. Peak = 78C. These seem in line with intelmactemp.com, but even the top/wristwrest at 65C is too uncomfortable to type on for longer than 1/2 hour. I've been waiting and hoping for thermal paste break-in, but no signs yet. Even then, I've read to expect only a 2-5C drop, which doesn't sound like much. I think I need 10C.
- EXCHANGE INTEGRATION: I use Goodlink on my Treo 700p, and sync Notes and Tasks with Exchange so that I never have to sync my Treo with my computer. Entourage is horrible, but would be acceptable if it synced Notes and Tasks. From my Google searches, it sounds like there is no way to edit and sync Notes and Tasks with Exchange in OS X. Anyone have a solution?
- GARAGEBAND HISS: When I record a podcast, I hear a hiss in the background every time I speak. Again, Google search and posts on forums yield nothing. This makes GarageBand unusable to me for podcasts.
- ICHAT QUALITY: The very first time I tested ichat with my brother, we got a huge screen with great quality. Clearly H.264 at work. In the 10 times since with him and friends, I haven't been able to get that screen, even while monitoring Network Doctor and plugging in directly to high-speed broadband connections. The quality now is worse than Skype video on Windows. Any clue what's going on?
So that's it. The rest I can live with: poor battery life, heavy laptop for features, lack of dual-layer, no PCMCIA like the VAIO SZ which has both PCMCIA and ExpressCard, etc. But the above is just killing me, both on the hardware and software front.
Please save me from switching!Well I switched 2 years ago, some specific suggestions:
- HOT HOT HOT: This is my biggest problem. Completely idle w/ no programs open = 48C. Running a few apps = 60-65C. Peak = 78C.
--- Mine runs at 43 deg idle 50 deg running apps, so this has never been an issue for me. Sorry....
- EXCHANGE INTEGRATION: I use Goodlink on my Treo 700p, and sync Notes and Tasks with Exchange so that I never have to sync my Treo with my computer. Entourage is horrible, but would be acceptable if it synced Notes and Tasks. From my Google searches, it sounds like there is no way to edit and sync Notes and Tasks with Exchange in OS X. Anyone have a solution?
--- Exchange doesn't sync notes and tasks. I use the palm entourage conduit to sync calendar and addressbook, but gave up using notes and tasks to sync - they just live on my palm now.
- GARAGEBAND HISS: When I record a podcast, I hear a hiss in the background every time I speak. Again, Google search and posts on forums yield nothing. This makes GarageBand unusable to me for podcasts.
---- don't use Garageband
- ICHAT QUALITY:
--- I chat usually gets blocked by firewalls when I'm travelling so I use Skype for mac instead
So that's it. The rest I can live with: poor battery life, heavy laptop for features, lack of dual-layer, no PCMCIA like the VAIO SZ which has both PCMCIA and ExpressCard, etc. But the above is just killing me, both on the hardware and software front.
Please save me from switching!
The only thing I'd suggest is to get out of the PC 'habit'.
The OSX interface is much nicer with its 'floating' windows, widgets and expose features.
The adjustment pallets in office are great.
Most of all I like the look and feel of the true fonts rather than windowsvery bitmapped 'jaggy' ones.
IPhoto, iWeb and Aperture are great for photography
Mail is nicer to use than outlook
Spotlight is superb for finding things really fast
I simply couldn't work without iDisk for syncing my work and swapping files
Need I go on...?
Switching is about workarounds, giving some things up and finding new delights. You can't expect your mac to behave just like your PC as well as being a mac....
MacBook Pro Mac OS X (10.4.6) -
Preventing the User from going back to the main page after logging out.
Hi all,
In my project I want to prevent the User from going back to the Main page, by clicking the back button of the browser, after the user has loggged out.I had invalidated the session so the user will not be able to do any operations, but he can vew the infos. I want to redirect to the login page if the user tries to go back using the back button after he has logged out.
I tried the same in this forum after loging out. Surprisingly it is the same. I can browse through all the operations i did even after logging out from here.
Is it not possible to do that in Servlets?Could somebody help?
Thanks,
Zach.Hi,
You can use a servlet filter to do this , as it can interceptany request to your application you can decide to allow user access or not to any page/servlet.
public class Test implements Filter{
public void destroy() {
public void doFilter(ServletRequest arg0, ServletResponse arg1, FilterChain arg2) throws IOException,
ServletException {
System.out.println("filter");
HttpServletRequest request = (HttpServletRequest) arg0;
if(!request.getRequestURI().contains("index")){ // set condition that will be checked to verify if the user is logged in
System.out.println("redirecting ... ");
RequestDispatcher d = arg0.getRequestDispatcher("/index.jsp");
d.forward(arg0, arg1);
arg2.doFilter(arg0, arg1);
public void init(FilterConfig arg0) throws ServletException {
}in you web.xml add :
<filter>
<filter-name>test</filter-name>
<filter-class>test.Test</filter-class>
</filter>
<filter-mapping>
<filter-name>test</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping> -
Taking Z1 back to shops!! going back to Apple: Sony Bridge for Mac does not work
Been an Iphone owner. really, really wanted to try a good android phone, and the z1 looked the best. However
I have had the most frustrating experience- this junky bridge software looks slick but it simply does not work on a mac .
I have spent nearly a week mucking around on forums, reading technical 'get arounds' this is a £600 phone and its not good enough. It might be Apples fault for being so locked down, but sony should not claim it works when it has so many issues.
1) it spent 3 days trying to load my media. It eventually got stuck on 10 min remaining. I pulled the cable.
no contacts had even been added, however 1/2 the photos have, but they are a little jumbled up from when they were on my iphone.
2) i try to download the lastest sony for Mac update 3 times- it cant even do this and gets stuck
3) i then try to update the z1 with the latest software, again this also it gets stuck and hangs. OMG how can i update my software, do i have to buy a PC to go with the phone.
im annoyed now and cant play with my new phone
4) connect phone again and just ask it to do my notes, messages and contacts. This seems to work , but all the messages to my Girfriend are completley missing?? why?
5) i try to load a few folders, the pictures on the bridge pop up window seem to freeze , ai cant even drag these across, the same happens with my music
6) i have a lot of photos on my mac form my iphone 3000. If i choose to load them it only allows me to load all of them and not browse.
can i avoid bridge and view my z1 as a drive? also why wont any of the software update?
the next thing is it seems to have infected teh mac, the new version f itunes will not install correctly!! this is very unusual.
some one please helpme before i rant in my blog!Hi Inventsc,
I apologize for the late answer. I'm sorry you haven't had a pleasant experience using Bridge. We are aware of the problems you mention and are working on it. As mentioned, you can connect your phone in MSC (mass storage mode). To do this, disconnect the phone, find USB connectivity settings and set it to MSC mode before plugging it in again.
Again, I am sorry it's not working properly for you.
Best Regards,
David -
I am not sure what is going on with my ipod but my ipod will not even let me open my wifi or apps. I don't know why can anyone help?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I downloaded two cd's last night and I am un able to play some songs cause it tells me I am this computer is unauthorized to play some songs,I did what it said about going to store to get authorized and still will not work,not happy at all! I NEED HELP OR MY MONEY BACK NOW!
There seems to be an occasional issue with downloads from the store. They prompt for authorization when they are in fact corrupt/incomplete in some fashion. Try deleting the problem tracks (do not hide from iTunes in the cloud), close iTunes and reopen, go to iTunes Store > Qucklinks > Purchased > Music > Not on this computer. Select a few tracks to download then click the icon that appears at the top-right of the iTunes window.. Untick the box that reads Allow simultaneous downloads. Proceed with the rest of your eligible purchases.
If you still have a problem use the Report a problem links in your account history to contact the iTunes Store support team.
tt2 -
IE 10 will not install from WSUS
I have the latest WSUS running on Server 2008 R2 and about 300 Win7 x64 PC. I initially blocked IE10 by not approving it. But now I have approved it and it will not install. The status per machine is "not applicable".
I have NOT used any "block IE10" tool at the PC level.
I have NOT used any "block IE10" tool at the group policy level.
All I did was "Not approve" it and then several weeks later "Approve it".
Any ideas?
TRLI am having the exact same issue. It looks like the import is not downloading the files. This is the information I've obtained in my troubleshooting so far.
I am receiving the following errors when installing IE10 through WSUS. I have imported the update from Microsoft's Update Catalog (on 4-11-2013), then approved the update to testing & pilot groups. The following errors occur when the clients
try to install IE10 from WSUS. They do not occur when installing from the internet through Microsoft's servers. From everything I can see through the log files, there are no installation files on the WSUS server. Is there any way to manually
add them, or re-import the update? Perhaps through a SQL query?
Installation Failure: Windows failed to install the following update with error 0x80070643: Internet Explorer 10 for Windows 7.
After importing the update into WSUS, nothing new was synchronized to the server. When right clicking on the IE10 updates, and going to 'File Information', the only files shown with a modified date of 4-11-2013 are ~4kb *.txt files. There are
no executables.
The following are a log excerpt when installing from WSUS, with bolded information to highlight what I believe are problems:
WindowsUpdate.log
2013-04-14 01:00:12:869 1180 c90 AU #############
2013-04-14 01:00:12:869 1180 c90 AU ## START ## AU: Search for updates
2013-04-14 01:00:12:869 1180 c90 AU #########
2013-04-14 01:00:12:869 1180 c90 AU <<## SUBMITTED ## AU: Search for updates [CallId = {58A7FACD-FF0E-49B7-BDF1-656D17B98938}]
2013-04-14 01:00:12:869 1180 4f8 Agent *************
2013-04-14 01:00:12:869 1180 4f8 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-04-14 01:00:12:869 1180 4f8 Agent *********
2013-04-14 01:00:12:869 1180 4f8 Agent * Online = Yes; Ignore download priority = No
2013-04-14 01:00:12:869 1180 4f8 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1
and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2013-04-14 01:00:12:869 1180 4f8 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2013-04-14 01:00:12:869 1180 4f8 Agent * Search Scope = {Machine}
2013-04-14 01:00:12:869 1180 4f8 Setup Checking for agent SelfUpdate
2013-04-14 01:00:12:885 1180 4f8 Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2013-04-14 01:00:12:916 1180 4f8 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-04-14 01:00:13:697 1180 4f8 Misc Microsoft signed: Yes
2013-04-14 01:00:17:494 1180 4f8 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-04-14 01:00:17:526 1180 4f8 Misc Microsoft signed: Yes
2013-04-14 01:00:17:572 1180 4f8 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2013-04-14 01:00:17:619 1180 4f8 Misc Microsoft signed: Yes
2013-04-14 01:00:17:619 1180 4f8 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2013-04-14 01:00:17:635 1180 4f8 Misc Microsoft signed: Yes
2013-04-14 01:00:17:713 1180 4f8 Setup Determining whether a new setup handler needs to be downloaded
2013-04-14 01:00:17:729 1180 4f8 Setup SelfUpdate handler is not found. It will be downloaded
2013-04-14 01:00:17:729 1180 4f8 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256"
2013-04-14 01:00:17:729 1180 4f8 Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2013-04-14 01:00:17:729 1180 4f8 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
2013-04-14 01:00:17:760 1180 4f8 Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2013-04-14 01:00:17:760 1180 4f8 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
2013-04-14 01:00:17:807 1180 4f8 Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2013-04-14 01:00:17:807 1180 4f8 Setup SelfUpdate check completed. SelfUpdate is NOT required.
2013-04-14 01:00:18:776 1180 4f8 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2013-04-14 01:00:18:776 1180 4f8 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://*****:8530/ClientWebService/client.asmx
2013-04-14 01:00:19:432 1180 4f8 PT WARNING: Cached cookie has expired or new PID is available
2013-04-14 01:00:19:432 1180 4f8 PT Initializing simple targeting cookie, clientId = a6aa9dc9-dc78-4bcb-b23b-de6d377f3cb2, target group = Testbed, DNS name = ****.****.com
2013-04-14 01:00:19:432 1180 4f8 PT Server URL = http://*****:8530/SimpleAuthWebService/SimpleAuth.asmx
2013-04-14 01:00:27:213 1180 4f8 PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2013-04-14 01:00:27:213 1180 4f8 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://*****:8530/ClientWebService/client.asmx
2013-04-14 01:00:28:229 1180 4f8 Agent * Added update {87E13ECB-C669-43BE-9E2A-01E567285031}.203 to search result
2013-04-14 01:00:28:229 1180 4f8 Agent * Found 1 updates and 69 categories in search; evaluated appl. rules of 756 out of 1007 deployed entities
2013-04-14 01:00:28:260 1180 4f8 Agent *********
2013-04-14 01:00:28:260 1180 4f8 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-04-14 01:00:28:260 1180 4f8 Agent *************
2013-04-14 01:00:28:291 1180 3f0 AU >>## RESUMED ## AU: Search for updates [CallId = {58A7FACD-FF0E-49B7-BDF1-656D17B98938}]
2013-04-14 01:00:28:291 1180 3f0 AU # 1 updates detected
2013-04-14 01:00:28:291 1180 3f0 AU #########
2013-04-14 01:00:28:291 1180 3f0 AU ## END ## AU: Search for updates [CallId = {58A7FACD-FF0E-49B7-BDF1-656D17B98938}]
2013-04-14 01:00:28:291 1180 3f0 AU #############
***Notice: there is no 'Download' section:***
2013-04-14 01:00:28:307 1180 3f0 AU Successfully wrote event for AU health state:0
2013-04-14 01:00:28:307 1180 3f0 AU Featured notifications is disabled.
2013-04-14 01:00:28:307 1180 3f0 AU AU setting next detection timeout to 2013-04-15 03:52:00
2013-04-14 01:00:28:323 1180 3f0 AU Successfully wrote event for AU health state:0
2013-04-14 01:00:33:229 1180 4f8 Report REPORT EVENT: {94640381-460D-4C10-8325-77979804D8A8} 2013-04-14 01:00:28:229-0600 1
147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows
Update Client successfully detected 1 updates.
2013-04-14 01:00:33:229 1180 4f8 Report REPORT EVENT: {FC1B6FAB-E6F1-40E2-B12C-8C3E192032BD} 2013-04-14 01:00:28:260-0600 1
156 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Pre-Deployment Check Reporting
client status.
2013-04-14 01:00:33:229 1180 4f8 Report CWERReporter finishing event handling. (00000000)
2013-04-14 01:00:36:260 1180 a58 DnldMgr Preparing update for install, updateId = {497DC29B-53B4-437B-81C1-92F0E5946E4B}.203.
2013-04-14 01:00:36:760 756 804 Misc =========== Logging initialized (build: 7.6.7600.256, tz: -0600) ===========
2013-04-14 01:00:36:760 756 804 Misc = Process: C:\Windows\system32\wuauclt.exe
2013-04-14 01:00:36:760 756 804 Misc = Module: C:\Windows\system32\wuaueng.dll
2013-04-14 01:00:36:760 756 804 Handler :::::::::::::
2013-04-14 01:00:36:760 756 804 Handler :: START :: Handler: Command Line Install
2013-04-14 01:00:36:760 756 804 Handler :::::::::
2013-04-14 01:00:36:760 756 804 Handler : Updates to install = 1
2013-04-14 01:00:42:338 756 804 Handler : Command line install completed. Return code = 0x00000000, Result = Succeeded, Reboot required = false
2013-04-14 01:00:42:338 756 804 Handler :::::::::
2013-04-14 01:00:42:338 756 804 Handler :: END :: Handler: Command Line Install
2013-04-14 01:00:42:338 756 804 Handler :::::::::::::
2013-04-14 01:00:42:370 1180 a58 DnldMgr Preparing update for install, updateId = {4A2D8132-7DA3-4B00-A37C-C004B77BA4CB}.203.
2013-04-14 01:00:42:635 756 804 Handler :::::::::::::
2013-04-14 01:00:42:635 756 804 Handler :: START :: Handler: Command Line Install
2013-04-14 01:00:42:635 756 804 Handler :::::::::
2013-04-14 01:00:42:635 756 804 Handler : Updates to install = 1
2013-04-14 01:00:44:198 756 804 Handler : Command line install completed. Return code = 0x00000000, Result = Succeeded, Reboot required = false
2013-04-14 01:00:44:198 756 804 Handler :::::::::
2013-04-14 01:00:44:198 756 804 Handler :: END :: Handler: Command Line Install
2013-04-14 01:00:44:198 756 804 Handler :::::::::::::
2013-04-14 01:00:44:198 1180 a58 DnldMgr Preparing update for install, updateId = {F50DB706-BA83-4247-800D-89BFE2FBCBBF}.203.
2013-04-14 01:00:44:307 756 804 Handler :::::::::::::
2013-04-14 01:00:44:307 756 804 Handler :: START :: Handler: Command Line Install
2013-04-14 01:00:44:307 756 804 Handler :::::::::
2013-04-14 01:00:44:307 756 804 Handler : Updates to install = 1
2013-04-14 01:00:45:229 756 804 Handler : Command line install completed. Return code = 0x00000000, Result = Succeeded, Reboot required = false
2013-04-14 01:00:45:229 756 804 Handler :::::::::
2013-04-14 01:00:45:229 756 804 Handler :: END :: Handler: Command Line Install
2013-04-14 01:00:45:229 756 804 Handler :::::::::::::
2013-04-14 01:00:45:245 1180 a58 DnldMgr Preparing update for install, updateId = {2C886B27-09D4-4DE3-8BBC-1EB5CD5BC76A}.203.
2013-04-14 01:00:45:276 756 804 Handler :::::::::::::
2013-04-14 01:00:45:276 756 804 Handler :: START :: Handler: Command Line Install
2013-04-14 01:00:45:276 756 804 Handler :::::::::
2013-04-14 01:00:45:276 756 804 Handler : Updates to install = 1
2013-04-14 01:00:45:932 756 804 Handler : Command line install completed. Return code = 0x00000000, Result = Succeeded, Reboot required = false
2013-04-14 01:00:45:932 756 804 Handler :::::::::
2013-04-14 01:00:45:932 756 804 Handler :: END :: Handler: Command Line Install
2013-04-14 01:00:45:932 756 804 Handler :::::::::::::
2013-04-14 01:00:45:948 1180 a58 DnldMgr Preparing update for install, updateId = {516C5430-1639-460B-A8D8-53BA47211610}.203.
2013-04-14 01:00:45:963 756 804 Handler :::::::::::::
2013-04-14 01:00:45:963 756 804 Handler :: START :: Handler: Command Line Install
2013-04-14 01:00:45:963 756 804 Handler :::::::::
2013-04-14 01:00:45:963 756 804 Handler : Updates to install = 1
2013-04-14 01:00:46:463 756 804 Handler : Command line install completed. Return code = 0x00000000, Result = Succeeded, Reboot required = false
2013-04-14 01:00:46:463 756 804 Handler :::::::::
2013-04-14 01:00:46:463 756 804 Handler :: END :: Handler: Command Line Install
2013-04-14 01:00:46:463 756 804 Handler :::::::::::::
2013-04-14 01:00:46:463 1180 a58 DnldMgr Preparing update for install, updateId = {822B837F-FFF0-44A8-9244-1AA8A0D77F7C}.203.
2013-04-14 01:00:47:416 756 804 Handler :::::::::::::
2013-04-14 01:00:47:416 756 804 Handler :: START :: Handler: Command Line Install
2013-04-14 01:00:47:416 756 804 Handler :::::::::
2013-04-14 01:00:47:416 756 804 Handler : Updates to install = 1
2013-04-14 01:01:21:464 756 804 Handler : WARNING: Command line install completed. Return code = 0x00009c47, Result = Failed, Reboot required = false
2013-04-14 01:01:21:464 1180 3f0 AU >>## RESUMED ## AU: Installing update [UpdateId = {87E13ECB-C669-43BE-9E2A-01E567285031}]
2013-04-14 01:01:21:464 756 804 Handler : WARNING: Exit code = 0x8024200B
2013-04-14 01:01:21:464 1180 3f0 AU # WARNING: Install failed, error = 0x80070643 / 0x00009C47
2013-04-14 01:01:21:464 756 804 Handler :::::::::
2013-04-14 01:01:21:464 756 804 Handler :: END :: Handler: Command Line Install
2013-04-14 01:01:21:464 756 804 Handler :::::::::::::
2013-04-14 01:01:21:510 1180 a58 Agent *********
2013-04-14 01:01:21:510 1180 3f0 AU Install call completed.
2013-04-14 01:01:21:510 1180 a58 Agent ** END ** Agent: Installing updates [CallerId = AutomaticUpdates]
2013-04-14 01:01:21:510 1180 3f0 AU # WARNING: Install call completed, reboot required = No, error = 0x00000000
2013-04-14 01:01:21:510 1180 a58 Agent *************
2013-04-14 01:01:21:510 1180 3f0 AU #########
2013-04-14 01:01:21:510 1180 3f0 AU ## END ## AU: Installing updates [CallId = {612023CC-6538-4722-9742-5FD88A9CB328}]
2013-04-14 01:01:21:510 1180 3f0 AU #############
2013-04-14 01:01:21:510 1180 3f0 AU Install complete for all calls, reboot NOT needed
2013-04-14 01:01:21:510 1180 3f0 AU Setting AU scheduled install time to 2013-04-15 07:00:00
2013-04-14 01:01:21:510 1180 3f0 AU Successfully wrote event for AU health state:0
2013-04-14 01:01:21:510 1180 3f0 AU Successfully wrote event for AU health state:0
2013-04-14 01:01:21:510 1180 3f0 AU Triggering Offline detection (non-interactive)
2013-04-14 01:01:21:510 1180 c90 AU #############
2013-04-14 01:01:21:510 1180 c90 AU ## START ## AU: Search for updates
2013-04-14 01:01:21:510 1180 c90 AU #########
2013-04-14 01:01:21:526 1180 c90 AU <<## SUBMITTED ## AU: Search for updates [CallId = {4CC39288-6E0C-4F19-ADEC-FAC9B9B68424}]
2013-04-14 01:01:21:526 1180 4f8 Agent *************
2013-04-14 01:01:21:526 1180 4f8 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-04-14 01:01:21:526 1180 4f8 Agent *********
2013-04-14 01:01:21:526 1180 4f8 Agent * Online = No; Ignore download priority = No
2013-04-14 01:01:21:526 1180 4f8 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1
and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2013-04-14 01:01:21:526 1180 4f8 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2013-04-14 01:01:21:526 1180 4f8 Agent * Search Scope = {Machine}
2013-04-14 01:01:26:698 1180 4f8 Agent * Added update {87E13ECB-C669-43BE-9E2A-01E567285031}.203 to search result
2013-04-14 01:01:26:698 1180 4f8 Agent * Found 1 updates and 69 categories in search; evaluated appl. rules of 617 out of 1007 deployed entities
2013-04-14 01:01:26:698 1180 4f8 Agent *********
2013-04-14 01:01:26:698 1180 4f8 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-04-14 01:01:26:698 1180 4f8 Agent *************
2013-04-14 01:01:26:745 1180 3f0 AU >>## RESUMED ## AU: Search for updates [CallId = {4CC39288-6E0C-4F19-ADEC-FAC9B9B68424}]
2013-04-14 01:01:26:745 1180 3f0 AU # 1 updates detected
2013-04-14 01:01:26:745 1180 4f8 Report REPORT EVENT: {F08F242D-B9C4-42EA-94A4-DD77F772F6BA} 2013-04-14 01:01:21:464-0600 1
195 101 {87E13ECB-C669-43BE-9E2A-01E567285031} 203 80070643 AutomaticUpdates Failure Content Install Installation
Failure: Windows failed to install the following update with error 0x80070643: Internet Explorer 10 for Windows 7.
2013-04-14 01:01:26:745 1180 3f0 AU #########
2013-04-14 01:01:26:745 1180 3f0 AU ## END ## AU: Search for updates [CallId = {4CC39288-6E0C-4F19-ADEC-FAC9B9B68424}]
2013-04-14 01:01:26:745 1180 3f0 AU #############
IE10_main.log
00:00.000: ====================================================================
00:00.219: Started: 2013/04/14 (Y/M/D) 01:00:49.057 (local)
00:00.250: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
00:00.266: Command line: "C:\Windows\SoftwareDistribution\Download\Install\WU-IE10-Windows7-x86.exe" /WSUS
00:00.297: INFO: Setup installer for Internet Explorer: 10.0.9200.16521
00:00.375: INFO: Previous version of Internet Explorer: 9.0.8112.16476
00:00.391: INFO: Checking if iexplore.exe's current version is between 10.0.8100.0...
00:00.422: INFO: ...and 10.1.0.0...
00:00.453: INFO: Maximum version on which to run IEAK branding is: 10.1.0.0...
00:00.485: INFO: iexplore.exe version check success. Install can proceed.
00:00.500: INFO: Operating System: Windows Workstation: 6.1.7601 (Service Pack 1)
00:00.563: INFO: Trying to extract ID: SetupDownloadList.txt (0) as "SetupDownloadList.txt"
00:00.610: INFO: Trying to extract ID: HardwareBlockingList.xml (0) as "HardwareBlockingList.xml"
00:00.641: INFO: Trying to extract ID: 6006 (0) as "IE10-neutral.Extracted.cab"
00:00.813: INFO: Trying to extract ID: 5501 (1033) as "Spelling_en.msu"
00:00.953: INFO: Extracted Spelling dictionary for en to C:\Windows\TEMP\IE14D3E.tmp\Spelling_en.msu.
00:01.016: INFO: Trying to extract ID: 5502 (1033) as "Hyphenation_en.msu"
00:01.047: INFO: Extracted Hyphenation dictionary for en to C:\Windows\TEMP\IE14D3E.tmp\Hyphenation_en.msu.
00:01.094: INFO: Trying to extract ID: 6128 (1033) as "IE10-support.cab"
00:02.219: INFO: Launched program to check hardware: "C:\Windows\TEMP\IE14D3E.tmp\IE10-SUPPORT\IEXPLORE.EXE" /CheckHardware "C:\Windows\TEMP\IE14D3E.tmp\HardwareBlockingList.xml"
00:03.328: INFO: Hardware support check succeeded. Installation will continue.
00:03.406: INFO: Windows 7 operating system detected.
00:03.469: INFO: Service pack major: 1
00:03.516: INFO: Service pack minor: 0
00:03.531: INFO: Service pack name: Service Pack 1
00:03.563: WARNING: Checking version for C:\Windows\System32\api-ms-win-downlevel-user32-l1-1-0.dll. The file does not exist.
00:03.578: INFO: Version Check for (KB2639308) of C:\Windows\System32\Ntoskrnl.exe: 6.1.7601.18113 >= 6.1.7601.17727 (True)
00:03.656: INFO: Version Check for (KB2533623) of C:\Windows\System32\api-ms-win-security-base-l1-1-0.dll: 6.1.7601.18015 >= 6.1.7601.17617 (True)
00:03.688: INFO: Version Check for (KB2731771) of C:\Windows\System32\kernel32.dll: 6.1.7601.18015 >= 6.1.7601.17932 (True)
00:03.750: INFO: Checking for correct version of C:\Windows\Fonts\segoeui.ttf.
00:03.875: INFO: Version Check for (KB2786081) of C:\Windows\System32\taskhost.exe: 6.1.7601.18010 >= 6.1.7601.18010 (True)
00:26.656: INFO: Setup exit code: 0x00009C47 (40007) - Required updates failed to download.
00:26.844: INFO: Scheduling upload to IE SQM server: http://sqm.microsoft.com/sqm/ie/sqmserver.dll
00:31.922: ERROR: SQM Upload failed while uploading "C:\Windows\system32\config\systemprofile\AppData\Local\Microsoft\Windows\Temporary Internet Files\SQM\iesqmdata_setup0.sqm" with error: 2147500036
00:32.031: INFO: Cleaning up temporary files in: C:\Windows\TEMP\IE14D3E.tmp
00:32.156: INFO: Unable to remove directory C:\Windows\TEMP\IE14D3E.tmp, marking for deletion on reboot.
00:32.281: INFO: Released Internet Explorer Installer Mutex
00:00.000: ====================================================================
The following are excerpts when installing from the Internet:
WindowsUpdate.log
***Truncated information to fit in post***
***Notice: This section is not present when using WSUS***
2013-05-08 10:32:05:573 1148 58c AU ## START ## AU: Download updates
2013-05-08 10:32:05:573 1148 58c AU #########
2013-05-08 10:32:05:573 1148 58c AU # Approved updates = 1
2013-05-08 10:32:05:589 1148 58c AU AU initiated download, updateId = {C0B3230A-BB79-4E44-B771-177BC224FCBF}.203, callId = {AE199656-7E10-4EB7-B24E-BEC6A3A56ABC}
2013-05-08 10:32:05:589 1148 58c AU # Pending download calls = 1
2013-05-08 10:32:05:589 1148 58c AU <<## SUBMITTED ## AU: Download updates
2013-05-08 10:32:05:589 1148 590 DnldMgr *************
2013-05-08 10:32:05:589 1148 590 DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdatesWuApp]
2013-05-08 10:32:05:589 1148 590 DnldMgr *********
2013-05-08 10:32:05:589 1148 590 DnldMgr * Call ID = {AE199656-7E10-4EB7-B24E-BEC6A3A56ABC}
2013-05-08 10:32:05:589 1148 590 DnldMgr * Priority = 3, Interactive = 1, Owner is system = 0, Explicit proxy = 0, Proxy session id = 1, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
2013-05-08 10:32:05:589 1148 590 DnldMgr * Updates to download = 1
2013-05-08 10:32:05:589 1148 590 Agent * Title = Internet Explorer 10 for Windows 7
2013-05-08 10:32:05:589 1148 590 Agent * UpdateId = {C0B3230A-BB79-4E44-B771-177BC224FCBF}.203
2013-05-08 10:32:05:589 1148 590 Agent * Bundles 6 updates:
2013-05-08 10:32:05:589 1148 590 Agent * {F03964C0-E029-4033-9D69-1583A40EB317}.203
2013-05-08 10:32:05:589 1148 590 Agent * {A86D9C79-A43B-4B11-A74B-EA13F21926F2}.203
2013-05-08 10:32:05:589 1148 590 Agent * {B765BC98-D278-46D7-9BE7-23EBA0DB3491}.203
2013-05-08 10:32:05:589 1148 590 Agent * {0DE3BD6A-2848-4791-968E-6DB43BEAC578}.203
2013-05-08 10:32:05:589 1148 590 Agent * {35E2AD10-DAEF-4301-8C15-6BCC080604FA}.203
2013-05-08 10:32:05:589 1148 590 Agent * {4B24E051-669D-44D1-B920-7F123F0D6728}.203
2013-05-08 10:32:05:589 1148 58c AU Getting featured update notifications. fIncludeDismissed = true
2013-05-08 10:32:05:589 1148 58c AU No featured updates available.
2013-05-08 10:32:05:589 1148 590 DnldMgr *********** DnldMgr: New download job [UpdateId = {F03964C0-E029-4033-9D69-1583A40EB317}.203] ***********
2013-05-08 10:32:05:620 1148 590 DnldMgr * All files for update were already downloaded and are valid.
2013-05-08 10:32:05:620 1148 590 DnldMgr *********** DnldMgr: New download job [UpdateId = {A86D9C79-A43B-4B11-A74B-EA13F21926F2}.203] ***********
2013-05-08 10:32:05:745 1148 590 DnldMgr * All files for update were already downloaded and are valid.
2013-05-08 10:32:05:745 1148 590 DnldMgr *********** DnldMgr: New download job [UpdateId = {B765BC98-D278-46D7-9BE7-23EBA0DB3491}.203] ***********
2013-05-08 10:32:05:792 1148 590 DnldMgr * All files for update were already downloaded and are valid.
2013-05-08 10:32:05:792 1148 590 DnldMgr *********** DnldMgr: New download job [UpdateId = {0DE3BD6A-2848-4791-968E-6DB43BEAC578}.203] ***********
2013-05-08 10:32:05:808 1148 590 DnldMgr * All files for update were already downloaded and are valid.
2013-05-08 10:32:05:808 1148 590 DnldMgr *********** DnldMgr: New download job [UpdateId = {35E2AD10-DAEF-4301-8C15-6BCC080604FA}.203] ***********
2013-05-08 10:32:05:823 1148 590 DnldMgr * All files for update were already downloaded and are valid.
2013-05-08 10:32:05:823 1148 590 DnldMgr *********** DnldMgr: New download job [UpdateId = {4B24E051-669D-44D1-B920-7F123F0D6728}.203] ***********
2013-05-08 10:32:06:464 1148 590 DnldMgr * All files for update were already downloaded and are valid.
2013-05-08 10:32:06:464 1148 590 Agent *********
2013-05-08 10:32:06:464 1148 c9c AU >>## RESUMED ## AU: Download update [UpdateId = {C0B3230A-BB79-4E44-B771-177BC224FCBF}, succeeded]
2013-05-08 10:32:06:464 1148 590 Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdatesWuApp]
2013-05-08 10:32:06:464 1148 590 Agent *************
2013-05-08 10:32:06:464 1148 c9c AU #########
2013-05-08 10:32:06:480 1148 c9c AU ## END ## AU: Download updates
2013-05-08 10:32:06:480 1148 c9c AU #############
***Truncated information to fit in post***
2013-05-08 10:35:51:050 1148 b98 Agent *************
2013-05-08 10:35:51:050 1148 c9c AU # WARNING: Install call completed, reboot required = Yes, error = 0x00000000
2013-05-08 10:35:51:050 1148 c9c AU #########
2013-05-08 10:35:51:050 1148 c9c AU ## END ## AU: Installing updates [CallId = {434D372F-F4C2-4217-8413-EC8BB8E9B386}]
2013-05-08 10:35:51:050 1148 c9c AU #############
IE10_main.log
***Truncated information to fit in post***
***The following lines are not present when using WSUS****
00:10.594: INFO: IE Setup Language pack included: C:\Windows\TEMP\IE157EF.tmp\IE-Spelling-en.cab
00:10.750: INFO: IE Setup Language pack included: C:\Windows\TEMP\IE157EF.tmp\IE-Hyphenation-en.cab
00:11.016: INFO: Waiting for 0 prerequisite downloads.
00:34.688: INFO: The neutral pack was successfully downloaded from the internet. Installation will continue using the downloaded package.
00:35.579: INFO: No reboot logic message NrApiStart(0), lParam=0x00082650 returned 0x00000000.
00:36.922: INFO: No reboot logic message NrApiScan(1), lParam=0x00000001 returned 0x00000000.
00:36.954: INFO: No reboot logic message NrApiStartInstall(4), lParam=0x00000001 returned 0x00000014.
00:36.985: INFO: Installing with the downloaded package. C:\Windows\TEMP\IE157EF.tmp\IE10-neutral.Downloaded.cab
00:37.047: INFO: Launched package installation: C:\Windows\System32\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE157EF.tmp\IE10-neutral.Downloaded.cab /quiet /norestart
01:45.750: INFO: Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
01:45.813: INFO: Setting registry to check if Internet Explorer is the default browser on first run: SUCCESS.
01:45.844: INFO: Preparing to install Spelling_en.msu using C:\Windows\TEMP\IE157EF.tmp\Spelling_en.msu
01:45.922: INFO: Launched package installation: C:\Windows\System32\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE157EF.tmp\Spelling_en\Windows6.2-KB2764916-x86.cab /quiet /norestart
02:18.235: INFO: Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
02:18.282: INFO: Preparing to install Hyphenation_en.msu using C:\Windows\TEMP\IE157EF.tmp\Hyphenation_en.msu
02:18.344: INFO: Launched package installation: C:\Windows\System32\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE157EF.tmp\Hyphenation_en\Windows6.2-KB2764913-x86.cab /quiet /norestart
02:48.672: INFO: Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
02:48.704: INFO: Preparing to install IE-Spelling-en.cab using C:\Windows\TEMP\IE157EF.tmp\IE-Spelling-en.cab
02:48.735: INFO: Launched package installation: C:\Windows\System32\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE157EF.tmp\IE-Spelling-en.cab /quiet /norestart
02:58.079: INFO: Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
02:58.125: INFO: Preparing to install IE-Hyphenation-en.cab using C:\Windows\TEMP\IE157EF.tmp\IE-Hyphenation-en.cab
02:58.172: INFO: Launched package installation: C:\Windows\System32\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE157EF.tmp\IE-Hyphenation-en.cab /quiet /norestart
03:06.313: INFO: Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
03:06.344: INFO: No reboot logic message NrApiInstallDone(7), lParam=0x00000bc2 returned 0x00000000.
03:06.375: INFO: No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.
03:06.407: INFO: No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.
03:06.454: INFO: Verifying that the Internet Explorer Optional Component is enabled.
03:06.485: INFO: Setup exit code: 0x00000BC2 (3010) - Installation Succeeded. Reboot required.
03:06.641: INFO: Scheduling upload to IE SQM server: http://sqm.microsoft.com/sqm/ie/sqmserver.dll
03:10.188: INFO: SQM Upload returned 403
03:12.485: INFO: Cleaning up temporary files in: C:\Windows\TEMP\IE157EF.tmp
03:12.579: INFO: Unable to remove directory C:\Windows\TEMP\IE157EF.tmp, marking for deletion on reboot.
03:12.672: INFO: Released Internet Explorer Installer Mutex -
I currently have iPhoto 8.1.2 on my macbook pro and am trying to update to the latest version. I have had to work backward, but I can only get back to 9.1, which will not install because it says I need at least 9.0 to install it. Is 9.0 available? Will I need to go back even further? Thanks
Upgrading from iPhoto 8 to iPhoto 9 requires a purchase. There are two ways to get to iPhoto 9:
1 - purchase a copy of the iLife 11 disk from a 3rd party retailer like Amazon.com or eBay.com.
2 - if your MBP meets the requirements upgrade you system for free to Mavericks. Then you can purchase the latest iPhoto version, 9.5.1, from the App Store.
OT -
I recently got a new iphone 4 w/iOs 7. I set up th eicloud, etc. and got my contacts and appointments from outlook. All was fine. Now it will not snyc/update my phone from outlook. I get "Your setup couldn't be started because of an unexpected error."
Hello JinxUK,
Thank you for the details of the issue you are experiencing with the iCloud Control Panel. I found an article referencing the error message you are getting:
“Your setup couldn't be started because of an unexpected error.”
Apple is investigating this issue. This article will be updated as more information becomes available.
iCloud: iCloud Control Panel setup cannot be started
http://support.apple.com/kb/TS5178
I recommend saving that link so that you can check back for a resolution when it becomes available.
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I have logic pro, soundtrack pro will not open i get an error message what do i do? i cant find the receipts ive checked my library am i looking in the wrong place?
I get the same kind of thing..
I'm on osx 10.7.2 and once I click the soundtrack pro icon I get an error message. I had problems with logic pro & my digi002r soundcard midi drivers but now is fixed (using a midi adapter).
here is the code:
Process: Soundtrack Pro [1705]
Path: /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
Identifier: com.apple.soundtrackpro
Version: 3.0.1 (960)
Build Info: SoundtrackProProject-9600000~277
Code Type: X86 (Native)
Parent Process: launchd [140]
Date/Time: 2011-10-18 13:12:05.201 +0200
OS Version: Mac OS X 10.7.2 (11C74)
Report Version: 9
Interval Since Last Report: 195725 sec
Crashes Since Last Report: 3
Per-App Crashes Since Last Report: 2
Anonymous UUID: 23728D81-590B-4C3A-8C67-1709945CD132
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /Library/Application Support/ProApps/*/ProFX.framework/Versions/A/ProFX
Referenced from: /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
Reason: image not found
Binary Images:
0x1000 - 0x7f7ff8 com.apple.soundtrackpro (3.0.1 - 960) <77CF322B-8BBE-AAEA-173F-75A237035319> /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
0x947000 - 0x94bfe6 +STPInterleave (??? - ???) <E87D1F34-6D97-63DB-454C-CF3D1B03F8E5> /Applications/Soundtrack Pro.app/Contents/Frameworks/STPInterleave.framework/Versions/A/STPInterleave
0x952000 - 0x98ffff com.apple.vmutils (4.2.1 - 107) <43B3BFA5-8362-3EBD-B44B-32DCE9885082> /System/Library/PrivateFrameworks/vmutils.framework/Versions/A/vmutils
0x9a9000 - 0x9f5ffb com.apple.audio.midi.CoreMIDI (1.8 - 42) <CBD34EBC-0FFD-34B4-B55A-BE1F61EF4BD8> /System/Library/Frameworks/CoreMIDI.framework/Versions/A/CoreMIDI
0xa18000 - 0xc3eff7 com.apple.prokit (7.1.1 - 1511) <498819A4-1BDD-3671-8796-E11865BCFBCE> /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
0xd49000 - 0xd49fff com.apple.iokit.dvcomponentglue (2.0.7 - 2.0.7) <1CFA5944-AB33-3A41-B4D2-4A624A514C0D> /System/Library/Frameworks/DVComponentGlue.framework/Versions/A/DVComponentGlue
0xd4d000 - 0xd54fff com.apple.AEProfiling (1.2 - 22) <43A46C32-8E13-82DD-8AF1-2A40690BF810> /Applications/Soundtrack Pro.app/Contents/Frameworks/AEProfiling.framework/Versions/A/AEProfiling
0xd5e000 - 0xd6dfff com.apple.AERegistration (1.2 - 77) <5D18C47F-6F9E-0C4C-8875-24A14A97186D> /Applications/Soundtrack Pro.app/Contents/Frameworks/AERegistration.framework/Versions/A/AERegistration
0xd81000 - 0xd83fff com.apple.ExceptionHandling (1.5 - 10) <6CA9446C-7EF9-35EE-BDF2-AA8D51E93E9E> /System/Library/Frameworks/ExceptionHandling.framework/Versions/A/ExceptionHand ling
0xd89000 - 0xe49fff com.apple.omf_framework (1.1.0 - 1.0) <ED5F21BC-18CD-D7F7-3D2E-F7F856BC0D40> /Applications/Soundtrack Pro.app/Contents/Frameworks/OMF.framework/Versions/A/OMF
0x11000000 - 0x1102afeb com.apple.proapps.ControlSurfaceSupport (2.0 - 68) <BD914236-49D8-9C9A-E8D6-CBC1738850B3> /Applications/Soundtrack Pro.app/Contents/Frameworks/ControlSurfaceSupport.framework/Versions/A/ControlS urfaceSupport
0x8fe88000 - 0x8feba9c7 dyld (195.5 - ???) <134323A7-49DC-3A9D-ACFD-32FAD0FD6BA2> /usr/lib/dyld
0x90840000 - 0x90992fff com.apple.audio.toolbox.AudioToolbox (1.7.1 - 1.7.1) <7646E131-08EE-3D72-ADA2-4A61C562B36E> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x90993000 - 0x90993ff2 com.apple.CoreServices (53 - 53) <7CB7AA95-D5A7-366A-BB8A-035AA9E582F8> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x91e60000 - 0x92036fe3 com.apple.CoreFoundation (6.7.1 - 635.15) <AC9F6462-6315-3D89-8075-D048DB4DBF7E> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x924a8000 - 0x92509ffb com.apple.audio.CoreAudio (4.0.1 - 4.0.1) <089D78E0-46A6-38DB-9545-7F35CC815939> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x93281000 - 0x9328ffff com.apple.opengl (1.7.5 - 1.7.5) <81166D23-DE8E-3938-AAD3-29B1FA5E446E> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x93331000 - 0x93331fff com.apple.vecLib (3.7 - vecLib 3.7) <8CCF99BF-A4B7-3C01-9219-B83D2AE5F82A> /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x93332000 - 0x93493ffb com.apple.QuartzCore (1.7 - 270.0) <0916DA83-6400-3FEA-BC53-5F4BA4D126EC> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x94326000 - 0x9436dfff com.apple.SystemConfiguration (1.11.1 - 1.11) <CA6CE2B6-DC18-31FF-9668-70BB2FD8D7BB> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x94420000 - 0x946a5fe3 com.apple.QuickTime (7.7.1 - 2306) <F8C64DC4-3FE4-3A06-B10B-59E7F3BA6FDD> /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
0x97dd0000 - 0x98082ff7 com.apple.security (7.0 - 55010) <BE0350C5-5221-3BFF-B674-646AB1BA0F2E> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x99d12000 - 0x99d76fff com.apple.framework.IOKit (2.0 - ???) <D14460ED-2B6C-375D-B3A4-B8C82E922666> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x9adc8000 - 0x9adc8fff com.apple.audio.units.AudioUnit (1.7.1 - 1.7.1) <2E71E880-25D1-3210-8D26-21EC47ED810C> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x9aef1000 - 0x9aef1fff com.apple.Carbon (153 - 153) <6FF98F0F-2CDE-3888-A304-4ED447D24CE3> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x9b2ec000 - 0x9b2ecfff com.apple.Cocoa (6.6 - ???) <650273EF-1ABC-334E-B745-B75AF028F9F4> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
Model: iMac12,1, BootROM IM121.0047.B0A, 4 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 1.71f21
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.58.4-P2P
Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD5000AAKS-402AA0, 500,11 GB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 3
USB Device: USB to Serial-ATA bridge, 0x04fc (SUNPLUS TECHNOLOGY CO., LTD.), 0x0c25, 0xfa120000 / 6
USB Device: iLok, 0x088e, 0x5036, 0xfa130000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: UM-2G, 0x0582 (Roland Corporation), 0x0106, 0xfd140000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 3
FireWire Device: Digi 002Rack, Digidesign, 400mbit_speed
thanks everyone
e -
Acrobat Pro 10 will not install keeps rolling back
I am attempting to install Adobe Acrobat X on a Windows 7 64 Bit machine, it will not install, gets all the way to the end and then just starts rolling back says the installation was interrupted and that no changes were made to the system.
I ran the msi from the command line with verbose logging on to see if I could figure out where it fails but couldn't find the error (towards the end it lists many errors but it seems to just be a list of possible errors, not sure but I definately have admin right and ran the msi as an admin so at least those two don't make sense).
I don't understand why its not installing but I'm really ticked its not at least telling me why its not installing. I had adobe reader and flash on the computer and I was afraid they might be newer versions than just straight Pro X so I uninstalled everything adobe on the computer and it still won't install the Pro X.
Can someone take a look at my log file and see if they can tell what I'm doing wrong? It would be very appreciated.
Thanks, SW.
Log file link
https://docs.google.com/open?id=0BwFRNdTQrK4sc3Q1aV9uMl9uZXcOne thought. Have you tried downloading the updates (http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows) and installing directly, rather than doing updates through the help menu?
-
I have a mac pro 1.1. the main hard drive failed. How do I reload OS X 10.7 back in my computer. the app store will not let me reinstall this os. My computer is not compatible OS x 10.8?
You need to first install the OS your Mac came on the bundled gray disks. Assuming it's Snow Leopard, you could then login into the App Store using your same Apple ID and password to download and install Lion.
If your Mac is a bit older and came with Leopard, 10.5.x, you can bypass that and install Snow Leopard from your retail disk. The only software you'd need to install separately from the gray disks would be the optional software, such as the iLife suite and other titles not included on the retail SL disk. -
Mainstage 2 : The poeples who buy complete version of Logic with Mainstage 2 will not have free update of Mainstage ??? This is outragous !!!
I also agree that the paid update is a sham to those who bought the full boxed set of Logic. The ONLY reason I bought the boxed version of Logic was to get MainStage....I don't use anything else in that package. So ultimately, I've paid hundreds of dollars for a product that's now selling for $30 and I don't even get a free update.....sheesh!
As far as this logic goes: " MS 2.2 is a feature release" and that I "never bought that version of MainStage with the Logic Studio box": bollocks! Many consider a feature release to be more than a .1 incremental update...OSX versions excluded. With the exception of major OSX updates, I've never experienced being charged money for a .1 incremental update, and the vast majority of software developers have a policy that incremental updates are free until a new version is released i.e. v.2.5.6 to v3.0. I'm sure that's not always the case, but it's definitely the case in an overwhelming majority of cases.
Shame on Apple for this price gouge. -
Mountain Lion downloaded from App store on 11th and 12th June will not install. Downloaded TWICE it times out after 20 secs into install. Can't get any help!!! Going around in circles!!
My Machine MacBook Pro OS 10.6.8
Processor 2.66Ghz i7,
4GB memory
128GB solid state drive
Purchased 2010Thanks very much for the advice. I trawled through the other answers on the site and it appears others had the same issue. I doubled the available space and the install went like clockwork... which is what one would norma;ly expect from Apple :-)
Maybe Apple should have a ' definitely read me first' notice before a download takes place with CLEAR instructions to have more than the 6GB they indicate ofr the Mountain Lion download
Maybe you are looking for
-
Error while upgrading NW04s ABAP from sp7 to sp8
Hi, I installed NW04s in my system and its ABAP stack is upgraded to sp7. When i was upgrading its SAP_BASIS support package to sp8, i got the following error. Error in phase: IMPORT_PROPER Reason for error: TP_BUFFER_INCONSISTENCY Return code: 0008
-
IMovie HD, iPhoto 08/09 - Photos import, render and then disappear.
*Software Overview* • iMovie HD • iPhoto 08, and iPhoto 09 • Mac OS 10.5.6 and Mac OS 10.5.7 • Network Home Accounts from Mac OS Server 10.5.5 *The Issue* • Dragging photos from the Media Browser into iMovie HD. • Each photo imports, renders and then
-
Column color in a dynamic report
Hi, I have a report with a dynamic number of columns (50 to 100). Now I need different background colors for certain columns not only the text but the whole table field (<td>). Is there anywhere an example, what I have to do? thanks, Elke
-
3.1.2 update problem and a .ipsw related question
For the last couple of days all my attempts in updating to 3.1.2 ended up in an error right at the conclusion of the download process. The download would get to 99% and than quit with a network time out error (even though there is actually no interne
-
Getting error message when trying to buy my book 'Cannot access Apple Store, please try later' Anyone experienced this?