Save measure parameters in a file

hi all.
I heve made a measurement program with a lot of parameters (more than 20 clusters of 20 variables...)
I want to save all those parameters in a file, then, when I want to replay the measure, I just have to load/open the parameter file.
How can I do this?
I have found some solutions on the forum but there not very helpfull.
Thank a lot in advance.

one way is to use the "configiuration file vi's" found under the File I/O pallete. There are examples that ship with labView on how to use them. However, they do not work "as is" with complex data structures.
The other option is convert all data to a spread sheet string and save using " Write to spread sheet file.vi", and reading them back using "read from spread sheet file.vi". This method is tediuos, but you edit the file manually in any text editor and do changes in case.
The other option is to use the method "Get control values" and "set control values".
Atached is a vi that uses this method.
You can also save data to XML/file and read it back
Attachments:
Save_param.vi ‏51 KB

Similar Messages

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

16bit? Pixels extending beyond the canvas? (from a crop with delete unused pixels turn off). Have you previously been saving PSD files?
IME you sometimes have to tell Photoshop that the first save of a session is JPG, and it remembers from there on. The way to 'tell' Photoshop that JPG, or PDF, or PNG etc are now your preferred format is to Ctrl (Cmd) click on that format in the Save As drop down list. So long as the file does not have parameters that your chosen format does not support, then this should work for you.
[EDIT] Just noticed that you did include 'Crop' in the subject line. Do you have 'Delete cropped pixels' checked?

I am Required to Save before opening a PDF file in FF 10.0.1. How do I get FF to open the PDF file?

I am Required to Save before opening a PDF file in FF 10.0.1. How can I get FF to open a PDF as the default?

Check your add-ons:
Cmd+Shift+A
Make sure the Adobe Acrobat NPAPI Plug-in is set to Always Activate.

Photoshop CS4 "Could not save as...because file is already in use or was left open"

I have been using Photoshop for years, and CS4 for about a year now. I have never had this error message pop up until this week. It started happening right after I did the Adobe update to 11.0.2. Everytime I try to save a PSD or JPG file now (which are the only two types of files I work with), I get this message preventing me from being able to save;
"Could not save as... because file is already in use or was left open."
I have to attempt to Save as about a dozen times before it will finally save the file. Any suggestions on what could be wrong and how to remedy it? Is it the update that caused this problem?

Turn off Caching of Thumbnails in Hidden thumbs.db Files
People sometimes report that they cannot manipulate their folders as they want to because Explorer has a thumbs.db file open. Windows 7 apparently generates these files for compatibility with older software that may expect such files to exist in folders with, for example, photos in them.
The good news is that (with Windows 7 Professional and above) you can disable this through the Group Policy editor:
Click the Start orb
Enter gpedit.msc in the search box and hit Enter.
Expand User Configuration - Administrative Templates - Windows Components.
Click on Windows Explorer.
Right-click the entry "Turn off the caching of thumbnails in hidden thumbs.db files" and choose Edit.
Enable the setting.
-Noel

On my new Imac, I had the trial version of Pages, and saved some files in it. Now I have purchased the full version from Apple via a download, but I cannot save or print the old files, please help!

On my new Imac I saved some files on the free trial version of Pages, since downloading the full version from Apple, have been unable to save or print from old files saved when using the trial version. Any ideas? Thank you!

My guess is the 30-day trial period has expired but you didn't remove the trial before installing the full version. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Yvan Koenig has written an AppleScript that removes the files. You can find it on his iDisk in For_iWork > iWork '09 > uninstall iWork '09.zip.

How export to csv work in safari browser? In my application export to csv open like a raw data in new tab. But other browsers working great!. Need to open in a csv file or save it as a csv file.

How export to csv work in safari browser?
In my application export to csv open like a raw data in new tab.
But other browsers working great!.
Need to open in a csv file or save it as a csv file.
Please suggest me. Thank you in advance!.

Hi Adrian,
Why don't you try any another software for opening CSV files then Notepad ? According to my experience, you can use these softwares to open an CSV files and they are:-
Microsoft Excel
Open Office Calc
Google Docs
Also there is an additional tool available known as CSV viewer. You may try this, download it from here http://www.csvviewer.com/
I've never used Notepad for opening CSV files, because sometimes it contains some symbols which are not not at all compatibile with Notepad.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

I use iMac desktop. I can't save web pages as PDF file by using Firefox, but by Safari is fine.

I'm using Mac OS X 10.6.4. Today, I tried to save my email content as a PDF file. However, I only got a PDF file that have partial content of email. Then I adjust the printer setting and did it again, then I only got a blank PDF file. There was nothing inside. Then I tried to save email as a PDF file by using Safari browser. And I got a complete and sucessful PDF file. I usually save web pages or web mail, online receipt as PDF file by use Firefox. But since I have updated to the new version, there were many problems with my Firefox. I tried to restore all my application and made Firefox in the old 3.6.3 version which I used to have no problem. But now still not working.

I solved it for myself: it was my HP smart-web printer crap that was a plug in and add on for firefox that somehow automatically got installed when I upgraded to 5. I disabled both in the add-ons manager, and voila, printing is working.
It seems there are many things, like this and the Google toolbar, that were screwed by the oddly fast update to 5. Looks like Mozilla didn't give anybody any notice! Must've been some really bad security hole.

I use iMac desktop. I can't save web pages to PDF file by using Firefox, but by Safari is fine.

I'm using Mac OS X 10.6.4. Today, I tried to save my email content as a PDF file. However, I only got a PDF file that have partial content of email. Then I adjust the printer setting and did it again, then I only got a blank PDF file. There was nothing inside. Then I tried to save email as a PDF file by using Safari browser. And I got a complete and sucessful PDF file. I usually save web pages or web mail, online receipt as PDF file by use Firefox. But since I have updated to the new version, there were many problems with my Firefox. I tried to restore all my application and made Firefox in the old 3.6.3 version which I used to have no problem. But now still not working.
''Duplicate post, continue [https://support.mozilla.com/en-US/questions/746583 here]''

hello jlzibell, please go through the troubleshooting steps described at [[Websites say cookies are blocked - Unblock them]].

I need to monitor a transducer block parameter and save it to a CSV file.

How can I monitor a transducer block parameter and save it to a CSV file? The reason is that I need to do some long-term testing of an FFb device we are developing, and I need to read the primary output parameter of the transducer block (not the scheduled AI block) every second or two and save to a CSV file.
I have tried to figure out a way to do that with FBUS Configurator, unsuccessfully, and I purchased FBUS Monitor, as that was recommended by an industry expert, but I have been unsuccessful at getting that to work as well.

Hi Wpinson,
Neither FBUS Configurator nor Monitor can meet your requirement. However, there are other approaches. NI-FBUS provides APIs for C, LabVIEW, VB and C#. You can use these APIs to read a parameter value of any block and use standard file IO functions to save the date into CSV file. The LabVIEW APIs are highly recommended because they are easy-to-use and LabVIEW also provides APIs for CSV file operations. You can build the application w/ LabVIEW in a short time.
You can find the examples of the FBUS APIs in the following folders:
1. C: C:\Program Files\National Instruments\NI-FBUS\MS Visual C\examples
2. VB: C:\Program Files\National Instruments\NI-FBUS\MS Visual Basic\example
3. C#: C:\Program Files\National Instruments\NI-FBUS\MS .NET\examples\CsharpExample
4. LabVIEW: search "fieldbus" in the LabVIEW example finder.

How to change the default save encoding of the dvm files when create dvm???

When I creating a DVM(domain-value mapping) in Chinese on the ESB control and confirm it, then restarted the SOA service, the DVM that I created in Chinese disappeared from ESB control. All the maps(both English and Chinese ) are in DVM Repository.
After I updated the encoding from ‘UTF-8’ to ‘GB2312’ in the three files below, and restarted the SOA service, the DVM in Chinese appeared on ESB control.
But when I adding the second row in Chinese and save it, then restart the SOA service, the DVM in Chinese disappeared from ESB Control once again. Because the encoding in the three files below is updated from ‘GB2312’ to ‘UTF-8’ .
Files:
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm\Chinese.xml.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\content\files\dvm\Chinese.xml_1.0
How to change the default save encoding of the dvm files when create dvm in ESB control ???

I have the same problem. When I updated to Mavericks now the bookmarks bar font is huge. I liked it the way it was before. I liked the smaller font. Also wish I could change the color of the sidebar and font/folders too.
I tried to see in preferences if there was anyway to change it, but I don't see anything there.

I had a drive failure and lost the iWeb file along with other things. I did manage to save a lot of user file documents but I don't see or recognize the my iWeb site file. It was on a 15" G4 Titanium pb. I'm trying to find a way, using version 2.0.4

I had a drive failure and lost the iWeb file along with other things.
I did manage to save a lot of user file documents but I don't see or
recognize the iWeb site file. It was on a 15" G4 Titanium pb.
I'm trying to find a way, using version 2.0.4 of iWeb on a different
pb to recover the file into the iWeb app or a way to download the site into iWeb.
There are 6 pages of images and text, and it
would be a task for me to recreate the whole thing again. I did
download the site but I don't know how or if I can get iWeb to see it and open it.
Does anyone have any knowledge about this? The link to my site:
<http://web.mac.com/danauerbach>
Any suggestions will be most appreciated.
dan auerbach
[email protected]

Unfortunately iWeb cannot read or import previously published files, only generate them. You'll have to recreate your site from scratch.
However, Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the recreation of the site.
OT

Save different Objects in one file by two different streams

Hi all,
I have a issue to read two Objects from one file if I write those in two different streams.
I open the ObjectOutputStream and save an Object to the file. Then I close this stream and file. Then I open the new ObjectOutputStream and save the second Object in the same file. It works Ok. Then I open the ObjectInputStream and try to read those two objects and get java.io.StreamCorruptedException.
This exception happes only when app tryes to read the second Object.
this is the code example:
//Write part
for (int i=0;i<2;i++)
File file = new File("test.swp");
FileOutputStream fileOut = new FileOutputStream(file,true);
ObjectOutputStream objOut = new ObjectOutputStream(fileOut);
JobObject jobObj = new JobObject();
jobObj.setID(i);
objOut.writeObject(jobObj);
objOut.flush();
objOut.close();
fileOut.close();
//Read part
FileInputStream fileOut = new FileInputStream("test.swp");
ObjectInputStream objOut = new ObjectInputStream(fileOut);
for (int i=0;i<2;i++)
JobObject jobObj = (JobObject)objOut.readObject();
objOut.close();
fileOut.close();
Thank for any help.

Maybe try closing the ObjectInputStream (and re-creating it as needed) within your for loop?
- Saish
"My karma ran over your dogma." - Anon

When I try to save on some websites I will try to save a pdf or mp3 file. Down below it will list the file and in the 'save as type' box it will not list as save as '.pdf or .mp3' but instead always says 'all files' which will not save it in a way it can

Why won't the 'save as type' section list .pdf or MP3 to save a PDF or MP3 file but instead always says 'save as type' -- 'all files "."'. How can I get rid of the 'all files'.?

Sorry, I have no idea what you are doing; can you give us some details?

Why can't I "Save as Text" a pdf file received as an email attachment?

I can "Save as text" a pdf file which I have created in my own computer (that is, it goes into MS notebook that I then can Copy and Save as an MS Word file) but not when I receive a pdf as an email attachment. (The file is saved, but it is empty.) Why would I want to convert my own pdf back to text? Well, in case I no longer have the original Word document I suppose, but the thing is "Save as text" works with my pdf, but not with those I recieve from others. How come? Thanks!

Is this a scanned PDF? If so, it must first be OCR'd.

How to save 4 versions of a file in the application server

Hi,
I have to write a program which will extract few data from SAP and write it in a file in the SAP application server. This program will be run once every month.
I need to save 4 versions of the files, current and 3 prior. These versions should cycle off the oldest once a new version has been created.
Could anyone help me how to do this?
Thank you!
Regards,
Sunitha.

Hi Sunitha,
The best way is to write a unix script in the unix server to do the job for you. Once The file is written in the server then leave the job from the unix side to get this done.
This is the best option i think. Writing a script is not a big task. You can call the script from ABAP or from an external daemon in the unix server. We have many such programs in our org.
Hope this helps
Cheers
VJ

Save measure parameters in a file

Similar Messages

Maybe you are looking for