"Save Message" - in Task list - Planning 11.1.2.2.302.3

Hi,
We have implemented Planning 11.1.2.2.302.3 and following was asked from our customer.
When I enter data (numbers) in the task list, I want to be warn with a pop up window, if I click "next" that "data are not save" --> - save yes or no-.
As per today customer goes following steps --> to 1-key inn data, 2-save, 3-click next to continue, work with next step
Customer wants --> 1-key inn data, 2-click next and get a pop up asking to save, work with next step.
IS that possible ?
We are speaking about an administration who has many people keying inn data and the manager's concern is to make it simple to his users.
Hope I made myself clear. And thks for any support ?
Best regards,
Rachid

It is a default planning behavior.
If you changed a data cell and move away (select a different form, or select a different page drop down) it'll automatically say that "This form contains unsaved data. Select OK to continue without saving data, or Cancel to discard operation"
Is that not happening?
Regards
Celvin
http://www.orahyplabs.com
Please mark the responses as helpful/correct if applicable

Similar Messages

  • Task list-Planning plant change

    Hi
    How to change the<b> <b>Planning plant</b> in the task list</b> ?
    Thanks
    Seenu

    hi seenu
    i think it is not possible to change the planning plant once you have assigned for maintenance plan, try to delete all the assignment of the task list and try ( iam not sure)
    regards
    thyagarajan

  • IA25 delete task list with out archeving

    Hi,
    when using IA25 to delete the general maintenance task list unable to delete, getting the error message  is tasklist still in use.
    Checked task list found no assignment.
    its was rollout verson is ECC6.0 which earilier upgraded from EC5.0.
    what may be the reason? is there any SAP note
    regards
    Kayveeyen

    Hi pete,
    Getting the following message.
    Task list IN010001 1 (type A) is still used
    Message no. CV548.
    But i checked the assignment and usage also. now where used
    Regards
    Kayveeyen

  • Making task list field mandatory in creation of maintenance plan?

    Dear All,
    I need your help in configuration of Making task list field mandatory in creation of maintenance plan. I checked with sceen variant config but that also not giving me any option to make the field mandatory.
    Is there any note or user exit for it?
    Regards,
    Kaushal Rai

    Dear,
    Pls check the exit IPRM0004:Maintenance plan / item: Customer check for time "SAVE".
    Regards
    Sunil

  • Strategy Plan with task list

    Hi all,
    can any one help me?
    I create a strategy plan with one maintenance item and one task list, with one task list item, for example. After scheduling I get a maintenance order with two items. One item from the task list and one from the maintenance item and it´s necessary to confirm both order items.
    It´s possible to create a maintenance order with only items from the task list?
    Thank you for your support
    Detlev

    Detlev,
    The PM/CS Order operations should only come from the task list that is assigned to the maintenance item.
    If you are getting additional operations than are on the task list then its possible that you have:
    - a system bug
    - developed some new functionality
    PeteA

  • URL Task List in System 9 Planning

    We have recently upgrade planning from 4.0 to System 9.3; however, there was a feature in Planning task list where you can build a URL to retrieve report from Hyperion Report with parameter passiing from Planning to Report for a POV driven report. Does anyone know how I would convert the below link in system 9.
    http://xxxx:8200/hr/common/HRLogon.jsp?elementName_UTF8=%5cTMWSP+Planning%Workbook&sameWindow=false&elementType=2&attribute=Locations.id.Region%20GOODSITE&gridHeadings=0&viewAs=pdf

    Hi,
    You can go to workspace and browse to the report through the explore page. Right click on the report and select properties. You should see the link called as smartcut over there. You can copy this link and use it in your task lists.
    Cheers,
    Alp

  • Material specification and Inspection plan - Task list usage

    Dear Friends,
    In inspection type  Task list usage is assigned
    For Example
    inspection type 01  -  usage - 03
    inspection type 05  -  usage - 05
    inspection type 06  -  usage - 07
    inspection type 10  -  usage - 06
    In my scenario i want to use all the above inspection type for a product
    if i use mateial specification there is no any problem with my  Task list usage
    If suppose i use inspection plan do i need to create different inspection plan with different usage
    or is it possible to create one inspection plan with all the above usage
    what about universal usage 03  can i use it
    i try to use but system does not triggering inspection lot
    can any one Suggest some ideas
    Many Thanks & Regards
    Raj

    Hi Raju,
    All of first pls understand the concept of Task list and specification.
    If you need to inspection any material in very systematic manner, where you will have well segregated operations where the appropriate Work Centers will be bind and under that hierarchy MIC will be attached. The inspection will be governed by some inspection points. And according the the same Samples will be calculated. When you wanna go with all these functionality then you must have to use Task list (Inspection plan).
    And if you don't wish to have these functions then simply go with the material specification.
    Now it comes the actual query about task list usage.
    If there is a common inspection plan is supposed to be used for all the inspection types for your material then you can prepare only one inspection plan, put ant of the Usage to it it can be 05 or 03 universal. But what you have to do is,
    Go to SPRO->Quality Management->Quality Inspection->Inspection Lot Creation->Maintain Inspection Types Execute and set the Task list usage as the same it is set in the inspection plan for all those Inspection types for which that common inspection plan is supposed to be used.
    Note:- There is no any link between inspection lot creation and task list usage of inspection plan.
    Regards,
    Shyamal

  • Is it possible to change Planning Plant in General Task list

    Hello Gurus,
    Is it possible to change Planning Plant in General Task list, ie. for eg.
    Earlier I have General Task list Group:22, Group Counter:1, with Planning Plant:0001 & now i want to change/update new planning plant 0002 instead of old 0001 in the same task list.
    could you plz suggest me, is it possible? & how to do changes?
    Thanks in Advance.
    Regards,
    Amol

    HI Amol,
    Its not possible to change the Planning plant , You can delete that task list or you can put deletion flag on it, and go for new creation
    Riyaj

  • Plant Maintenance - Linkage between Task List and Maintenance Plan

    Sir,
    In Plant Maintenance, I have an equipment for which there are 9 maintenance activities that have to be performed every year. Out of these 4 activities will be carried out every month. 1 activity will be carried out during the months of February, June and October. 5 activities will be carried out only in the month of December.
    I need to create Task List for all these activities and subsequently create Maintenance Plans for all these Task Lists.
    Can I group all the 4 activites which will be carried out every month into one single Task List, with separate operation nos and time against each activity?. I don't know whether it is correct or not.
    If I use the above method I can create 3 Task Lists for this particular equipment with same Group no and 3 Group Counters.
    How to create Maintenance Plan for the above scenario?.
    Eventhough, 4 activites are carried out every month and they have been grouped into a single Task List (Group counter 1) and if these activites are carried out on different dates within a month how can I create Maintenance Plan and subsequently create a Maintenance Order?.
    I need some help in this regard. A detailed reply will be helpful.
    Can anyone throw some light in this regard.
    Regards,
    R. Vijayakumar

    you need to create one task list with a maintenance strategy with packages and hierarchy to outline the work requirements i.e. some tasks to be carried out 3 monthly some 4 monthly etc, and also if common tasks appear in 3 monthly package vs 4 monthly package then to suppress the duplicating task
    you would then define a strategy based maintenance plan and run it to get the respective maintenance orders

  • Error message in transaction IA05 - crate task list

    In transaction IA05 I try to create a new general taks list. When adding a new group counter (12) to my group 264 I get the error message "The planner group counter number has already been allocated". But when I go in display mode (IA07) type in group 264 and hit the Task list overview button I can not find group counter 12 assigned to group 264. Does anyone know what is wrong and how to correct it?
    Best regards
    Andreas

    Dear Andreas
    While creating the Task list aginst the exist group system automatically takes the next one counter.
    U can as per system. The deleted counter also counted by the system . So u cant take the same no of the counter for new counter.
    Even iam not seen the delected task lists counter T codes for checking . But u can check the present task list counter thro Table PLAS.
    to know the status
    Thenna

  • Strategy in task list and Strategy based Maintenance Plan

    Dear Gurus,
    I have some doubt about
    is it same if we create a single cycle plan with a task list in which maintenance strategy let say A is being used and a maintenance plan strategy based let say A and task list without any strategy
    can some one explain use of strategy in task list and maintenance plan
    Regards
    Armaan

    Hi,
         In Strategy Based Plans :- When ur entering strategy in initial screen of IP42 then inside the plan system will allow u to select tasklists created with that strategy only ...
    In Single Cycle Plans :-  Here even though if u select tasklist of a particular strategy , system copies all the operations of the tasklist to the order...
    From your above example :- Single Cycle Plan if cycle is monthly is equal to strategy based plan having only 1Month package .
    further package in strategy allows u to select which operations of tasklist u want for 1Month..
    regrds
    pushpa

  • Extend task list for new planning plant

    Hi Gurus,
    I have 40 task lists for a planning plant 1000. I want to extend them for a new planning plant 2000. Is there any method to do it without usnig BDC or LSMW?
    Regards,
    VM

    Hello VM,
    No it is not possible to simply extend the Task list.
    You can copy the same for different planning plant. But if it is not so much necessary, Make other as Maintenance Plant rather than Planning plant.
    Regards
    Naveen

  • Inspection Plan Task List Intervals

    Does anyone know if it is possible to create two task lists within an inspection plan, with the same usage, and have only one be active at a time depending in the date?  The scenario is this...we have different specifications on a given product depending on the time of year (summer, winter, etc) and as opposed to manually setting one to "Q" (approved) and one to "HLD" I thought maybe there was some 6.0 functionality that would allow SAP to change this for me? 
    Thank you in advance!
    vee

    Nothing along those lines. But here's another option for you.
    Create two insepction types.  For instance.. 04S and 04W.  Assign each inspection type a different plan usage.  In the summer, all the materials would have 04S activated as the preferred inspection type.  In the winter, on the approriate date, use QA08 to change over all your materials to 04W which, since it has different plan usage, would use the "winter" inspection plan.
    In the summer, on the correct date, use QA08 again to switch the materials back to the summer plan by activating and setting as preferred, the 04S inspection type.
    FF

  • Task list usage inspection plan - Universal 3 and GR 5

    Dear Friends,
    while creating Inspection plan for GR inspection from Procurment it is advisable to use Task list usage 5 or usage 3 which is universal
    may i know what is the difference
    Please advise also
    There is task list type  Goods receipt model  -    501  which  is Material, vendor and manufacturer what that mean and where it  is used
    Thanks & Regards
    Raj

    Hi Rajkumar,
    While planning an Inspection,which Task List gets assigned to which Inspection Lot is linked through combination of TaskList Usage and Lot Inspection Type
    In spro (at the location as suggested above) we assign TaskList usage to the Inspection Type. When any Lot is created based on the setting in QM view of MM, it looks for this link for automatic assignment to the lot.
    For your question "while creating Inspection plan for GR inspection from Procurment it is advisable to use Task list usage 5 or usage 3 which is universal"; both options will work as long as the above config in spro is maintained.
    It is however advisable to use the standard option of TaskList Usage of  05 as it is easier to segregate and analyse TaskList / Inspection Plans based on their usage; in case any need arises.
    Hope this helps,
    Thanks,
    RKM.

  • Planning Task List Due Date

    Dear All,
    When we create planning task list we can aslo assign due date for each task with in task list.
    This due date has three components
    1. Date
    2. Time
    3. Alert
    However time is denoted in EDT (Estern Daylight Time).
    As we are implementing the project in India we need to have Indian Standard Time (ISD) instead of EDT. Is this possible.
    Further if useres are spread across the globe is it possible to set different alert times for different users. For this i think we need to replicate the task list with due date set users specific.
    Can anyone provide with screen shot of delayed activities, completed activities based on due date previously assigned.
    Thanks and regards
    Payous999

    Hi Payous999,
    Let me explain in steps
    1. EDT , You are viewing EDT because the system on which Planning has been installed has its time zone set as EDT.
    2. Once ,we change the time zone of the server/ system from EDT to IST ( in you case ) , then try to create a task list , it will show you IST.
    3. Screen shots and more of task list information can be found in the guide itself.
    Sandeep Reddy Enti
    HCC
    http://hyperionconsultancy.com/

Maybe you are looking for