Save most of a long encode - just re-encode a short piece in the middle?

I have just encoded a long project (80 minutes) to a very high quality mp4 file which worked beautifully, but took 40 hours (!) I'm not complaining - my sytem is low end for CS5.5. Here's the question - if I make a new PPro timeline from this mp4 encoding and insert the title I forgot in the middle, just cut it and put in a black title card, will AME be smart enough to see that it only has to encode the title clip, when I encode the whole thing with the same output settings I used for the encode of the original timeline?
Will it just copy the already encoded parts and only do the mp4 encoding on the short added clip?

OK, no one seems to have an answer to this - I guess I restart my encoding. See you in 48 hrs

Similar Messages

Every time I attempt to download the 64 bit version of iTunes it just freezes my entire computer right in the middle of installation. Anything?

Every time I attempt to download the 64 bit version of iTunes it just freezes my entire computer right in the middle of installation. Anything?

Same problem.

I can't save a newly created Document - it just says there's an error in the Application - Photoshop CC on a Mac.

I also tried some google but wasn't successfull :/

Nobody can tell you anything without proper system info or other technical details like storage locations, settings for the swap files and so on.
Mylenium

I've been using samsung for a long time and I just changed into an iPhone 5s and the most important thing I need is my calendar appointments , but in the notification center it doesn't show my events for tomorrow , will there be an updated or this soon?

I've been using samsung for a long time and I just changed into an iPhone 5s and the most important thing I need is my calendar appointments , but in the notification center it doesn't show my events for tomorrow and it doesn't even show more than 1 event , will there be an updated or this soon? Or should I just shift back to samsung?????

Go to settings/notification centre and make sure today vie and calendar day view are both on

I am no longer able to turn off cellular data usage for individual apps. When I turn most of them off, they just automatically reset themselves to allow data usage. Any thoughts?

I am no longer able to turn off cellular data usage for individual apps.
When I turn most of them off, they just automatically reset themselves to allow data usage.
Any thoughts?

I am definately having the same problem and cannot believe there are no answers or even support that this problem exists. I never have to post on forumns, I read what is usually readilly availiable for the craziest of problems.
Anyways, the problem is just that, I can toggle off a individual app's setting of cellular data availability, but it changes right back on rescreening. After restarting, resetting etc, it seems that the big Apple Apps are the biggest offenders. Music is a very important one, Podcasts can kill you very quickly, app store, Photos, Facetime, Stocks?!?!?!
When one searches for solutions I have to see hundreds of links to "How great is ios7, you can turn off cellular data for individual apps FOR DUMMIES!". I am a dedicated apple fool since the Apple IIe (long time), but when they run afowl it is usually really bad. Why offer an on/off switch if the setting is always on?
I am writing just to add support to the existence of this problem, not so much for people to offer ideas of solutions as I now believe it is in the coding.
Thank you

I can no longer encode a sequence in PP CC after the Dec 2013 update

II have had to shut down and restart PP CC about 5 times when just creating a very simple sequence of clips from a family get together for Thanskgiving. I had to shut down since everything just quite responding. Fortunately, when I reopened the project, I could resume. I finally got my sequence created, but, now I can't export the sequence. The encode has failed 8 times in a row. I've tried direct export, and exporting to the AME queue. Sometimes I get the error sound and the absolutely useless error message "Error compiling movie. Unknown Error." Other times it just stops making any progress in the encode with no message at all, but there are zero CPU cycles being consumed by PP or AME. It just plain stops, wiht no eror message. That happened 3 times when used the Media Queue approach, and in the preview window in AME, it just stopped encoding at very different places in the sequence.
It appears as though I can no longer encode a movie. And I'm paying big bucks for this every month? What a sap.
I'm glad I'm not a Pro, whose income and life depends on these tools! But, I have a full time job, and only a very small amount of free time. I do not want to spend my small amount of free time as an Adobe Beta Tester. I've been using Adobe tools for years, which is why I signed up for CC, but...at this point: I can't even encode a simple sequence!
I can't express my disappointment. I wanted to be loading the encoded MP4 onto VIMEO for my friends and family to see by now, but.....I can't even encode a very simple sequence. And, I not a newbie. I have hundreds of videos on VIMEO, and many more on Youtube and Smugmug. Every one was produced with Adobe PP (from v4 on).
But now: I'm dead in the water.
I gurantee you that i will not 're-up' when my CC subscription expires, and, I guess right now, I have to start from scratch with my raw clips and find some other tools to use? I wish all my expensive plug-ins (like MB Suite) would work in whatever the tools I will move to...but...I guess I'll just have to write them off as a loss, just like the next 8 months of paying for my Adobe CC Software that no longer works.
I wish there was a way I could take the Thanksgiving Project and its sequences I've created in PP CC and convert the Project to PP 6.0, since I never had any issues with it PP v6.0.
But, from what I understand, if you make a project in PP CC, you are lost. You can't go backwards.
And, you know what? I'm done. I quit. I won't even try starting over in PP 6.0. I'm going to find some other tools. I know they won;t be as full-featured as Adobe's, but...I'm not a pro. I just need something that works reliably.
Disgusted beyond words.
John
Win 7 Pro
24 GB Ram
NVidia GTX 470
PS: So, does Adobe have any kind of disaster recovery plan when an update like this fails? Can you please send out a "new update" that rolls me back to the prior version on PP CC?

OK. I have successfully encoded this very simple sequence, but, I *can't* get it to encode using my "standard" custom H.264 preset that I have been using for years.
But, I was not able to encode in many plain vanilla codecs either, but, I got a notice that there was a CC update for AE, so I took the time to install those updates, and, as I always do, I re-booted after the update of AE.
But, of course I had re-booted a couple times last night when I couldn't get the sequence to encode. That's somethinf I always try b4 writing to a form.
So, here's the sequecne of events this morning:
1) Try to encode sequecne to uncompressed AVI (Cineform AVI 1920x1080). It SUCCEEDED. But, even though the AVI was large > 3.6 GB the quality was horrible, I did not pay much attention to the quality settings.
2) Try to encode to Quicktime H.264 codec. FAILED.
3) Try to encode to Quicktime Codec=Uncompressed 4:2:2. FAILED
4) CC UPdate notice for AE CC and AE 6.0
5) Perform update
6) Reboot
7) Try to encode to Quicktime Codec=Uncompressed 4:2:2. SUCCEEDED - but ENORMOUS FILE SIZE *very nice quality though* :-)
8) Try to encode to Quicktime Codec=H.264. SUCCEEDED.
9) Try to encode to my 'usual' H.264 Preset FAILED, just hung up during the 2nd of two passes. My preset is a VBR with 2 passes, see bitmap below. In this particular case it got 'hung' at this frame. But, It never 'hangs' in the same place?
So, I don't know why I was able to encode the sequence using the Quicktime Wrapper and botn Uncompressed and H2.264 Codecs after updating AE CC and rebooting, but not before. Surely there is no interaction between AE and AME?
But, the re-boot should not have caused it alone, since I had rebooted several times last night, and I've installed nothing but the new update for AE since last night?
So, I guess I'm OK now. Please excuse my tone last night, I was very frustrtated.
It is interesting that I still can't encode this particluar sequence using my "standard" H.264 preset.
And, BTW Jim: What I mentioned in my previus post was not that I had brought and old PP 6.0 sequecne into CC and encoded it successfully, but that I just re-encoded one of my most complex sequences AGAIN in PP 6.0, just to wanted to make sure nothing was haywire with "good old" PP 6.0.
But, I did just re-encode a sequence from PP CC from before the Dec 13 update using my "standard" H.264 preset, and...yes...it DID encode.
SOOOOO...Jim, you were correct. My inability to encode was not due to the DEC 13 PP CC update, but something very peculiar about this one sequence. But, it is a very simple sequence. The only effects applied is some light color grading using MB Colorista, and Warp Stabilizer to a stabilize a few hand held shots. No other effects. And...the encode that fails using my standard preset, never fails at the same frame.
But...at this point I'm OK. Instead of an encoded file in MP4 I have an ecnoded H.264 rendition in the QuickTime MOV wrapper. At least I've got that sequence done and can move on to the ton of others I need to get to (without having to learn an entirely new tool). :-)
John

IDVD changes encoding quality in the middle of burning a DVD. This causes the DVD to run out of room for longer projects. This worked fine for the past two years, and in the past few weeks it started having this problem.

Here are details on the problem: I'm running iDVD 7.1.2 on an iMac that uses OS 10.6.8. After about two years of using iDVD to burn both single- and dual-layer disks, I find I can no longer burn dual-layer disks. When I put in a dual-layer disk and try to burn a project, the project size keeps increasing. For instance, I recently tried to burn a project that was just over 4GB and, when I stopped the project part-way through, the project size read as 6.89GB. If I don't stop the project in time, the blue bar that indicates burning status reaches the end (so that all of it is blue) before the time listed has elapsed and the disk ejects but cannot be recognized by the computer or our dvd player. If I then go to the project menu and switch the encoding from Professional Quality to Best Performance and back again, the program "remembers" the actual file size - but, if I try to burn the project again, I have the increasing same problem. If I let the project go until the disk ejects, the project menu will then read some total in the red (i.e., above the size that a dl disk will burn, even though the actual file size is below the limit). I believe (perhaps 90% sure) this began after I tried to encode a movie with subtitles; instead of burning properly, this movie created a data disk with at least one folder that said something about VIDEO_TS, if I recall correctly.

To be a true video DVD the disk must be in the UDF format (Universal Disk Format) and must have a AUDIO_TS folder (empty) and VIDEO_TS folder (where all the elements of the DVD are located).
The content on a DVD is MPG-2 encoded and it is quite possible for the encoded size of your content to exceed the estimated project size - especially if you use lots of transitions and content encoded with CODECS more recent than mpg-2 (which is quite old at this point).
The safest thing to do is to make your 'burn' to a disk image file - then you know everything went fine before you commit to burning a disk, I know the instructions warn about creating a disk image file for dual-layer projects, but I've never had any problems and don't recall hearing anyone here who had problems.

My save image is no longer an option on Facebook

On Facebook on my iPad2, I used to be able to touch the photo for a few seconds and I would get the choice to Open, Open in New Page, Save Image or Copy.
Now when I touch the photo, I get Open, OPen in New Tab, Add to Reading List, Copy. I no longer have the Save Image option.
I can still get Save Image when I touch a photo in Safari using Google or in my email but not in Facebook which is where I use it the most.

@MaloneTP
Thanks for keeping me updated! Do you see the screen options displayed in the following link: http://bit.ly/T2koBL for changing the calendar view options in Kies Air? Also, let me know if you're able to add a Reminder by following these steps: http://bit.ly/T2l9dY. Keep me posted. Thanks!
AnthonyTa_VZW
Follow us on Twitter @VZWSupport

When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?

When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?
I need to be able to send it to a PC in order to print it.

Hard to say what is happening without examining the file.
If you like click on my blue name and email me both the .pages file and the the .pdf you have made from it.
Peter
ps It would help to say what version of Pages you are using and on what you are running it. iOS or Mac and what version.

I have downloaded the most recent version of Iphoto and it no longer works period. I lost all photos, and the app crashes every time I try to open it. How can this be fixed?

I have downloaded the most recent version of Iphoto and it no longer works period. I lost all photos, and the app crashes every time I try to open it. How can this be fixed?

Post the first 50 lines only of the crash report
Regards
TD

Just replaced my iphone 4 with new 4. restore from icloud is hung on an app I no longer use (password probably expired) how can i get the restore to move on to the next app

just replaced my iphone 4 with new 4. restore from icloud is hung on an app I no longer use (password probably expired) how can i get the restore to move on to the next app

Read another post in the forum about this and it appears this app also installs a profile with a proxy service that you will have to try and delete as well. Check that out.

ERROR(web elements)- A string can be at most 65534 characters long

Hello
I have a 2 level dynamic cascading prompt in crystal reports. 1st level distinct count of values->223 but
second level distinct count of values->30,133. I am able to track these values in the sub report.
while passing the values from subreport to main report to show as a list box using select cascade...i am getting the run time error
"A string can be at most 65534 characters long" in the subreport formula.
please provide me a solution for this as soon as possible.
Version-CR XI R2.
Database-Oracle 9i
Thanks in advance
-Chaitanya

Hi Jamie
Thanks for your reply. I separated the list of values as you specified in step A in the query itself.
Now I am able to pass the values from sub report to main report.
But not getting idea to concatenate the separated list of values in to a single list box on the main report.
[In the main report-> I have created 4 parameters in place of 2 parameters like [MFG_Site1, MFG_Site2, SKU1, and SKU2]
According to the Syntax, I have used the same parameter name for element name in weselectcascade function.
in the main report, created 2 weselectcascade functions for Mfgsite(MFG_Site1,MFG_Site2)
2 weselectcascade functions for SKU (SKU1, SKU2)
2 separate list boxes I am getting on the report (one for A to M, other for N to Z)
Please provide me a solution to combine these two in to a single list box.
Thanks
Chaitanya

Hi, I just downloaded and installed Photoshop cc and the Camera Raw version is not the latest one available,so now I can no longer open files from my Nikon D750! Can I update ACR?

I just downloaded and installed Photoshop cc and the Camera Raw version is not the latest one available,so now I can no longer open files from my Nikon D750! Can I update ACR?
I have been using the new version of ACR with PS6 and have been able to open the D750 files,now I'm stuck.
Thanks,
Greg E

You were probably using the Release Candidate version of camera raw 8.7, which one gets from Adobe Labs.
http://labs.adobe.com/technologies/cameraraw8-7-cc/index.html

Hi, My photo stream used to work fine. But after removing all the photos to separate folders in my computer, my new photos are no longer streaming to my PC. They appear in the photo stream on my other devices - iPhone5 and iPad Mini. It's just my PC

Hi,
My photo stream used to work fine. But after removing all the photos to separate folders in my computer, my new photos are no longer streaming to my PC. They appear in the photo stream on my other devices - iPhone5 and iPad Mini. It's just my PC that's missing the photos.
When I open the iCloud control panel, I cannot turn on the photos. That option is ghosted. I'm running on Windows 7 with iCloud 3.0. Any ideas on how I can fix this? All help is appreciated! Thanks!

Hi Kevinmvb,
Welcome to the Support Communities!
The article below may be able to help you with this. It sounds like you may have moved your photos out of the Uploads folder where they need to reside.
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
Cheers,
- Judy

I just got a MacBook Pro and I used Home Sharing to transfer my library from my PC. However, my PC's battery died in the middle of the process so only half of my music was transferred. The sharing option no longer shows up on the left. How do I fix this?

I just got a MacBook Pro and I used Home Sharing to transfer my library from my PC. However, my PC's battery died in the middle of the process so only half of my music was transferred. The sharing option no longer shows up on the left. Do I need to start completely over and delete the content in my new library to prevent duplicates or is there a way to continue the process?

I just got a MacBook Pro and I used Home Sharing to transfer my library from my PC. However, my PC's battery died in the middle of the process so only half of my music was transferred. The sharing option no longer shows up on the left. Do I need to start completely over and delete the content in my new library to prevent duplicates or is there a way to continue the process?

Save most of a long encode - just re-encode a short piece in the middle?

Similar Messages

Maybe you are looking for