Save new camera raw defaults for already opened smart objects.

I've a question about Photoshop and Smart Objects, as I like to use Smart Filters. I open my raw photos in Camera Raw, I adjust them and then continue editing in Photoshop as smart objects.
My problem is that if during editing in Photoshop I adjust again some parameters reopening the photo in Camera Raw, there's no way I can save the new adjustments for the next time I want to open the raw again.
I happened to me I changed a lot of parameters and I wanted to have them as defaults for that photo.
Quite simply: if I I want to save new Camera Raw edits as defaults for that photo, how can I do?
P.S. I tried saving a new snapshot, but they disappear if I open the raw again.

Thanks for your answer. Actually inserting the photo as a linked object does what I want, but it's awkward, slow and not so immediate. Also I have to open the photo from the beginning like that, as a new layer.
There should be an option inside camera raw like "update original with new settings".

Similar Messages

Installing the new camera raw plugin for pse6 HELP!!!

Ok, so what am I doing wrong? I've downloaded the new camera raw 4.6 plugin for pse6 and It isn't updating! Can someone help me??? I'm obviously doing something wrong - if you could walk me through the steps I'd greatly appreciate it!
Thanks!!!

dj_paige,
sorry I wasn't clear - I got it figured out.

New Camera Raw 4.3 wont open in photoshop

when photos are open from bridge, into raw and I click open image, camera raw disappears to show bridge (which was already open) and does nothing. If I click a thumnail I can choose open in cs3 and that works but it opens in camera raw again , THEN I can choose open and it opens is PS3, but as a PSD, not a JPEG. this all happens after I upgraded everything. quite frustrating.

Ok purged cache and that didnt help. I am trying to open as 8 bit.
I am using the new upgrade CR 4.3, as well as new PS3 10.01 and Bridge 2.1.1.9.
I had some install problems to begin with and had to uninstall and reinstall. Then the upgrade to 10.0.1 put two executables in my adobe file giving me an error message when I tried to open a jpeg cause its file association was opening 10.0 and giving me an error message. I finally had to remove the 10.0 excutable (which was named Photoshop CS3) and then rename the new execuatable which was being called only Photoshop, to Photoshop CS3 to get it to work but it still is buggy.
What happens is, from Bridge if I open in raw 4.3 and I like what I see and want to work on it in CS3, I cannot open it directly into CS3. If I choose open object or open image, Raw disappears and I see only Bridge, it will not open CS3 and place the file there. Now, if I ALREADY have CS3 open in the background and I choose open, it opens in Raw from Bridge, again OVER CS3 which it also opens, then I can hit open object or open image from THAT raw dialoge box and it opens in CS3. It didnt do this before yesterday. Of course I dont want to have both programs running and eating space and I want the file to open directly into CS3 if I ask it to open from Bridge, just as its always done before.
Any suggestions really appreciated.
Andy

New Camera Raw Update for Ap 3

* Canon EOS Rebel T2i / 550D / Kiss X4
* Leica S2
* Olympus E-450
* Olympus E-600
* Olympus E-620
* Sony Alpha DSLR-A230
* Sony Alpha DSLR-A330
* Sony Alpha DSLR-A380
* Sony Alpha DSLR-A450
It also addresses RAW processing issues for the following cameras:
* Canon EOS 30D
* Pentax K-x
* Pentax K-7
http://support.apple.com/kb/DL1035
Regards
TD

DLScreative wrote:
I'm just a little disappointed because my 13mp 5D mark ONE blows the 18mp 7D away on IQ. I guess they just crammed too many pixels on too small a sensor. It's not terrible, but some images look a little mottled at 100%. I wish I'd flipped the extra money for a 5D Mark TWO.
Sorry for the OT comment, TD.
DLS
Just to add some fire. I compared some of my D90 (12MP) with some 7D files I have and... mine are as good, have less chroma noise and Aperture is faster with it (since the files are smaller). I do think Canon did put to many pixels on the sensor given its size. Nikon as a better quality per pixel (for now, Canon will probably correct this for its next line). That's not the first time I read this kind of comment about the 7D. I don't know how the 50D compares.

New Camera Raw Update for iPhoto 09 and Aperture 3

Adds support for
* Canon EOS Rebel T2i / 550D / Kiss X4
* Leica S2
* Olympus E-450
* Olympus E-600
* Olympus E-620
* Sony Alpha DSLR-A230
* Sony Alpha DSLR-A330
* Sony Alpha DSLR-A380
* Sony Alpha DSLR-A450
It also addresses RAW processing issues for the following cameras:
* Canon EOS 30D
* Pentax K-x
* Pentax K-7
http://support.apple.com/kb/DL1035
Regards
TD

This appears to be Intel ONLY. Neither of my G5s can install the update, nor does it show up in Software Update on those machines.
On my daughters Intel iMac, it shows up in Software Update and it installs perfectly well from the stand-alone installer.
I waited and waited for support for my Olympus E-620, Bah!

New Camera Raw Update for iPhoto 11 and Aperture 3

This update adds RAW image compatibility for the following cameras to Aperture 3 and iPhoto '11:
Fujifilm FinePix X100
Nikon D5100
Olympus E-PL2
Olympus XZ-1
Samsung GX-1S
For more information on supported RAW formats, see http://support.apple.com/kb/HT3825

This appears to be Intel ONLY. Neither of my G5s can install the update, nor does it show up in Software Update on those machines.
On my daughters Intel iMac, it shows up in Software Update and it installs perfectly well from the stand-alone installer.
I waited and waited for support for my Olympus E-620, Bah!

How do I copy Camera RAW defaults to another computer?

I use Photoshop CS6 and Adobe Camera RAW to process RAW files (D700). I have ACR preferences set to make the defaults ASA specific, which means I have 41 defaults for ACR. I have a folder of images shot with the D700 that includes one image for each ASA the camera can select when auto ASA is activated in the D700, that's where I get 41 ASA values. I use the images in this folder to set a default for each ASA value and then select one at a time in Camera RAW and click to set a new default for ACR (Adobe Camera RAW). These defaults are saved in some location on the computer, but I don't know where. I would like to copy these saved defaults to another computer that is also running Photoshop CS6. Does anyone know where the defaults are located, or is there a better way to accomplish this task?

If I understand what you said, I think this will only save RAW Defaults for that specific image conditions. I have the RAW converter set to make it specific to image ASA and for the D700 it can set 41 different ASA values for the image. I have 41 Camera RAW Defaults for the D700 and would like to transfer all to the second computer, that's the reason I am looking for options to accomplish this task.
I have a folder with 41 D700 NEF files with each having a different ASA value. I select this folder of images in Camera RAW, adjust each image to the defaults I want - the main difference is noise settings. When I have the settings I want, I click the Done button. I then open the images again in Camera RAW, select one at a time and select the "Save New Camera Raw Defaults". Now when I open new NEF files for the D700 it will automatically apply the Default I want based on the image ASA.
I currently copy the folder with the 41 images that was saved with the defaults I want and open them one at a time and save a new default on the second computer. If I copy the "Camera RAW" folder it should give me all the same defaults, custom camera profiles, custom curver, settings, etc.
I have not tried this yet, but if it works it will save a lot of time keeping the two computers in sync relative to these parameters.

Having trouble opening camera raw files. Already downloaded Camera Raw Update for Photoshop CS5. I have a pc.

Please Help? Having trouble opening camera raw files. Already downloaded Camera Raw update. I have a pc.

If the camera is fairly new then the version of ACR you have with CS5 won't be able to read those file. You'll need to upgrade to a newer version of Photoshop or use Lightroom 5.
Once a new version of Photoshop comes out Adobe does not support updating ACR from the older version of PS.

Why can't I save camera raw defaults?

I am currently unable to reset my camera raw defaults in CS5 (Camera raw 6.5). When I click on "Save Camera Raw Defaults", the changes do not show up when I open up a new image using Adobe Bridge. I seem to be stuck with the changes I made some time ago. What could be happening?

Camera Raw uses the same settings you used last time to open a file. That's just the way it works. The defaults you set will be used on any image you haven't opened before.
In order to revert an image that's been opened before to the new defaults, you need to do one of the following:
1. Choose Camera Raw Defaults from the menu:
2. Depending on how you have configured Camera Raw to remember your past settings, either delete the sidecar XMP files or go into Edit - Preferences - Camera Raw... and purge your Camera Raw cache if you'd like to throw away all previous settings and have future opens use your new defaults.
-Noel

Camera Raw support for new Nikon D810

Hi, could you please advise when we can expect to see camera raw support for the new nikon D810.
Thanks

Adriana – I installed the download from the link in the 7/27 post and was able to convert my NEF files to DNG format from my new D810 camera, but could not view/edit the NEF-smalls. When I saw your latest post I used your link to go to that download and noticed that in the description it mentioned that the issues with the D810 NEF-small have been resolved. I deleted/emptied trash of the 7/27 download and re-installed the one mentioned from your link – although they were both identical in file size and version: 8.6 – hmm? I tried the converter – but nothing new was converted (I presume because all had already been converted before?). However, CS6 is still not able to open/edit neither the NEF-small file formats, nor the DNG created from it. I am thinking maybe I am missing a step, because when I select properties for Camera Raw in CS6, the version is 8.5.0.236 – is that ok (my CS6 version is 13.0.6 – and no other updates appear available)? I only downloaded the DNGConverter_8_6.dmg; installed the .pkg – did I forget a step? Thanks for your help!

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no ma

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no matter what work I have done, inc cropping they all go back to ,as they came out of camera. What on earth is happening? I am on PS CS6. I might point out everything was working normally up to yesterday, when this first started.
I recently changed computer to 64bit from 32bit, not sure if this causing the problem or not. Any help would be appreciated.

Robert,
Would you be so kind to rephrase your question with concise, precise information and without any "let's say that" hypotheticals? Sorry, I can't quite follow you.
Also please give exact versions of Photoshop CS6 (13.what.what), of Bridge and of your OS.
Thanks.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

New Camera RAW in Photoshop CC 2014 won't open multiple Panasonic RAW (.rw2) at the same time from Windows Explorer.

New Camera RAW in Photoshop CC 2014 won't open multiple Panasonic RAW (.rw2) at the same time from Windows Explorer. If I select 2 raw files and click "Open" Camera RAW will only open 1 raw, then when I click "Done" it will close and open the second, sequentially. Previous Photoshop CC and RAW worked fine, it would open mulitple RAW at the same time. How do I fix this?

If it worked for you that way previously there isn't much to comment about. I just tried opening multiple images from Windows Explorer with Photoshop CS6 and Camera Raw 8.6, and the first image would open and when I clicked cancel then the second image would open. But if I wanted multiple images opened in Camera Raw to work on them simultaneously it was necessary for me to open them from Bridge. I just did it as an experiment because I normally use Lightroom. Anyway, IF it was a feature at one time to work as you described, it doesn't seem to be that way now.

Where can I find the plugin to open camera raw files for Nikon D810 for Photoshop CS5.1? I've looked around the site but cannot get this to work.. Thank you.

Where can I find the plugin to open camera raw files for Nikon D810 for Photoshop CS5.1? I've looked around the site but cannot get this to work.. Thank you.

See for yourself which version of ACR is needed for that camera’s RAW files
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
then check your version (Photoshop > About Plug-In > Camera Raw).
Your version of Photoshop does not support that version of ACR.
You could use the free DNG Converter.

Camera Raw default opening in PSE9

I recently installed PSE9 on my MAC alongside my previous version PSE6. I prefer some of the options(ie. Bridge instead of Organizer, etc.). After processing an image in Camera Raw the image always opens in the default PSE9. How can I make ACR open my images directly into PSE6?

See if this helps:
http://barbarabrundage.com/2011/01/13/using-bridge-with-photoshop-elements-9/
MTSTUNER

How do I get camera raw plugin for cs5.1 extented for new olympus omd e-m1 camera?

how do you get camera raw plugin for cs5.1 extented for new olympus omd e-m1 camera?

Native support requires ACR version 8.3, which will only run under CS6 or CC.
Use the free DNG converter to make DNGs readable in older ACR versions. http://www.adobe.com/downloads/updates.html

Save new camera raw defaults for already opened smart objects.

Similar Messages

Maybe you are looking for