Save on Network path not possible

Hello,
I download a Adobe Reader file and want to save it on a network path, but I get a error message "Data media full or data media for temp files full". I can save the file on a local partition and copy the file to the network path without problems. The network partition has enough space. With other pdf-reader, I don't have a problem.
Please help me.
Regards
Oli

Hi,
>>On logon, drive aren't conncted, a reboot doesn't fix the problem, a logoff and logon fix the problem
Usually, for group policy drive mapping to work, we need to log on twice continuously to apply the settings. Otherwise, we can try to enable the follow policy setting:
Computer Configuration\Administrative Templates\System\Logon\ Always wait for the network at computer startup and logon
>>net use * \\DOMAIN\DFS-SHARE
>>-> Network path not found
When we can't map the drive, if we try to access the share folder from the File Explorer, will we be able to access the folder? Besides, what's operating systems of the computers? If they are Windows 7, we can try to install the following hotfix to see if
it helps.
You cannot access a DFS share through a mapped network drive on a computer that is running Windows 7 or Windows Server 2008 R2
https://support.microsoft.com/kb/983620?wa=wsignin1.0
Best regards,
Frank Shen

Similar Messages

A desktop is failing to join in Domain over a VSAT link. Error: Network path not found.

Dear Friends,
Facing an issue for adding a desktop in Domain over VSAT. When I say enter after typing the domain name which i want to join. I am asked for User name and Password. After User name and password is entered it waits for a long
time and then it gives an error as Network Path not Found. I am pretty surprised why is it happening like that.
In hosts file too I am mentioning the IP of the DC at my Data Center.
I have another site over VSAT which has worst latency and more RTO's than this one, but on that site I am able to add a desktop in Domain. I don't have domain controller at the remote site which is connected by VSAT.

Please do not hardcode the domain IP address in your HOSTS file. That will just create issues.
Please make sure that your client computer points only to internal DNS servers for DNS resolutions.
You can use NSlookup to make sure that DNS resolution for your DCs A and SRV records are working properly:
http://social.technet.microsoft.com/wiki/contents/articles/29184.nslookup-for-beginners.aspx
https://support.microsoft.com/en-us/kb/241515?wa=wsignin1.0
Also, make sure that you have no connectivity failures between your remote site and the one having your DCs using
ping: http://social.technet.microsoft.com/wiki/contents/articles/30110.ping-for-beginners.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Network path not found ldap applications

Hi,
"The network path was not found" error message when ever start a LDAP-related application in Windows Server 2012 R2.
unable to open the all of the below LDAP applications
Active Directory Users and Computers MMC snap-in
Active Directory Domain and Trusts MMC snap-in
Active Directory Sites and Services MMC snap-in
ADSI Edit MMC snap-in
Group Policy Management MMC snap-in
DHCP MMC snap-in
Ldp.exe
Any help..greatly appreciated.
MD

If server manager posts lot of LDAP errors that mean the component may not have installed succesfully or if you see a yellow exclamation in server manager the configuration may not be complete. To complete the configuration click on the yellow exclamation
to proceed.
If the configuration is complete then as it's a new setup, can you try to remove the AD Domain Services Role -> Reboot -> Add the role service -> Configure the role service -> Reboot and then try
Reg,
Darshan
Darshan

Large document causes InDesign to hang - Save as IDML etc. not possible

I recently had what I can only call an InDesign nightmare. An important 150 page document I had been working on for months suddenly turned “self-destructive”. I could still open this document and even create PDFs from it, but almost every other action (for example, opening the find dialog or the spell checker) would result in InDesign not responding anymore. Upon restart, the document would be recovered - only to choke InDesign again whenever I tried editing it.
I tried saving my work using the tricks that are often suggested in this situation: “Package”, “Save as” or “Save a copy” (in IDML format) to create a clean copy of the document without any digital cruft. Unfortunately, all of these commands would result in InDesign crashing or hanging as well.
At this point, I tried to copy all (threaded) text from the document to a text-only document in BBEdit, a popular text/code editor. But even a simple “Copy” command would crash InDesign. An when I managed to copy a section of text from the InDesign document to BBEdit without InDesign going down immediately, BBEdit would hang, too - something that almost never happens; this is an incredibly robust editor.
As a last resort, I created an empty InDesign document and moved chunks of content from the defect document there piece by piece. Whenever InDesign crashed, I realized I had come closer to the “land mine” in that doc.
After several hours, it came down to one paragraph of text that could neither be edited or copied without InDesign hanging, so I simply rewrote that. Switching on invisible characters showed nothing except letters and spaces for this paragraph.
So now I have saved my formatted content, but lost all master pages and other settings. And of course, I still don't know what happened in the first place...
Has anyone ever experienced something similar? Is there another way out of this situation (where even exporting to IDML or using “Save as” isn't possible anymore)?
It is only this one document that caused trouble, so I doubt trashing Preferences would help.
Thanks!

I have seen something similar, and in that case I was able to isolate the problem in pretty much the same way you were. I also found exporting the text to InDesign Tagged Text , placing that into a new file, copying to the clipboard, and pasting to replace the bad text.

Not able to install iTunes 10.3.1 in my Win 7 home edition OS, while installing getting "\\APPDATA not accessible" Network path not accessible and installer stops

Hi,
Installation of iTunes 10.3.1 fails in my notebook which has Win 7 home edition OS. Earlier i had iTunes 10.2.1 which was working perfectly, later upgrade installation fails.
need help.

Does no one have an idea?

Cannot join domain "the network path was not found"

Hi there.
As I wanted to install new Microsoft Lync Server, I tried to prepare a virtual machine for this. For some reason I used a virtual machine that I tested for some another services, therefore it had some changes on it.
As you know before installing Lync Server your client must be join a domain and when I tried to joined it I faced with this error "The following error occurred attempting
to join the domain “ysatech”; the network path was not found "
Before my search, I thought it was DNS problem. I checked DNS but nothing was wrong.
I searched for it and I read some forums answers and I resolved it:
As I said my client server had some changes, the problem was in the NIC but not about DNS or WINS. The "Client for Microsoft Networks" of
NIC of my domain network was not checked and it must be checked.

Check the dns setting on client and ensure the setting as below.
1. Each workstation/member server should point to local DNS server as primary DNS and other remote DNS servers as secondary.
2. Do not set public DNS server in TCP/IP setting of client/member server.
3. If multiple NIC are configured disable the unrequired NIC.Check the NIC binding order too.
This issue may occur if the TCP/IP NetBIOS Helper Service is not running on the client computer.
http://www.chicagotech.net/pathnotfound.htm
Network Path Not Found" Error Message When You Try to Add Workstation to Domain:http://support.microsoft.com/kb/285182
I will also recommend to enable the Client for Microsoft Networks.If still issue persist post the ipconfig /all details of client computer.
Best Regards,
Sandesh Dubey.
MCSE|MCSA:Messaging|MCTS|MCITP:Enterprise Adminitrator |
My Blog
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

InfoPath Designer 2013 - Network Path was not found

Hey,
I am currently building an InfoPath form (Designer 2013) for a SharePoint Library.
I am opening and editing the form in 'advanced settings' of the Library.
From here I can work through some changes and quick publish with no problems.
At an indeterminable point, my quick publish stops working and says "network path not found". I don't believe its a connectivity issue as it persists.
I can publish the form to a new library, but then cannot update the new form with another publish as I meet the same error message.
Does anyone have a similar experience? Am I corrupting the file by messing around with conditional formats etc?
thanks

Hi shanekny,
According to your description, my understanding is that you cannot republish your form for updating and receive the error “network
path not found”. For troubleshooting, please take steps as below:
How about the library in other site collection? If not , it may be caused by the InfoPath Site Features.
This is a hidden feature in all site collections and can only be viewed through PowerShell. We can disable and re-enable this feature by using following PowerShell script:
PS C:\> Disable-SPFeature "IPFSSiteFeatures" -url "http://Server/Sites/SiteCollection"
PS C:\> Enable-SPFeature "IPFSSiteFeatures" -url "http://Server/Sites/SiteCollection"
If so, you can refer to the articles:
http://knowledge.seagate.com/articles/en_US/FAQ/189931en
In order to solve the problem more efficiently ,could you please check ULS log to find more details about the error?
Please inform me freely if you have any questions.
Thanks
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Network path

I get a message when I try to print a PDF. It says "There was an error printing this document. Network path not identified." How do I solve this problem?

Hi tgiordan,
Would you mind answering the following questions (Along with Michaels...)
1. When did you encounter it?
2. Which workflow do you often use?
3. What are the hardware specifications of your machine?
4. What was the state of the memory usage when you encountered it?
5. Do you face "Not Responding" or hangs often with other softwares like MS Word, etc.?
6. Which Operating System and Reader Version are you using?
7. Any other Additional information that you would like to provide us?
Thank you! Stacy

Software updates deployment error message: Network path cannot be found

Dear All,
I am trying to deploy software updates to the collection but not matter what i try it is always failing with the error message" Network path not found".
Version : SCCM 2007
Rgs,

Hi Can you share what are the errors you can find in the cas.log file. Have you replicated the package to the DPs?
Blog: http://theinfraguys.com
Follow me at Facebook
The Infra Guys Facebook Page
Please remember to click Mark as Answer on the answer if it helps you in anyway

When I try to open up a PDF document, i get the following error message: "There was an error opening this document. The network path was not found" AArrgh please help as I need to open up my documents. Thanks.

When I open up a PDF Document all i get is an error message saying: "There was an error opening this document. The network path was not found" I dont know how to fix this, so looking for some advice please, as I really need o open up my documents.
Thank for any help.

The documents I’m trying to read are already saved on my computer, under various different headings, I know that we have a server, so I only assume these documents are saved on here, as I said before I’m not good with all this techno stuff. I do my work each week ( on a payroll system) and save the documents for each company, they automatically go to the correct place. I never request for them to be saved in a certain place ( well not that I’m aware of) . I then on occasions need to open up this information, it is then that I can’t read or open the documents. We do have a tech help, but they are off sick until the 5th Jan, hence me trying to work out if I can fix this problem through this help site. Its ADOBE Reader that I’m trying to use.

Updating hybrid configuration failed - Kerberos authentication: The network path was not found

I'm configuring Exchange 2010 SP3 as a Hybrid server with Exchange Online. This is a single server running Exchange roles Mailbox, Client Access, Unified Messaging and Hub Transport.
When I run the Manage Hybrid Configuration, I receive the following error:
Updating hybrid configuration failed with error
'System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occurred while using Kerberos authentication: The network
path was not found.
The full text from the Hybrid Configuration log file (C:\Program Files\Microsoft\Exchange Server\V14\Logging\Update-HybridConfiguration)
[1/5/2014 21:21:1] INFO:Opening runspace to
http://[servername]/powershell?serializationLevel=Full
[1/5/2014 21:21:1] INFO:Disconnected from On-Premises session
[1/5/2014 21:21:1] ERROR:Updating hybrid configuration failed with error 'System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : WinRM cannot process the request. The following
error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
   -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
   at System.Management.Automation.Runspaces.AsyncResult.EndInvoke()
   at System.Management.Automation.Runspaces.Internal.RunspacePoolInternal.EndOpen(IAsyncResult asyncResult)
   at System.Management.Automation.Runspaces.RunspacePool.Open()
   at System.Management.Automation.RemoteRunspace.Open()
   at Microsoft.Exchange.Management.Hybrid.RemotePowershellSession.Connect(PSCredential credentials, CultureInfo sessionUiCulture)
   at Microsoft.Exchange.Management.Hybrid.Engine.Execute(ILogger logger, String onPremPowershellHost, PSCredential onPremCredentials, PSCredential tenantCredentials, HybridConfiguration hybridConfiguration)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.UpdateHybridConfiguration.InternalProcessRecord()'.
I have sought help, posting on the forum at community.office365.com -
http://community.office365.com/en-us/forums/158/t/212265.aspx. But I've got to a point where I believe the problem is more to do with how PowerShell is operating on the on-prem Exchange server.
Has anyone else come across this problem running the Hybrid Configuration Wizard?

Hello Darrell,
Have you verified the settings of Powershell virtual directories for the on-premises Exchange Servers? The following article has a list of some common issues with that virtual directory and how to correct them:
http://technet.microsoft.com/en-us/library/ff607221(v=exchg.80).aspxI would take a look at the one titled "Configure Kerberos Authentication" specifically to ensure everything
looks good.
As the article states you can run the Exchange BPA and it will check if any of these exist as well.

SCOM agent install fails Error 80070035 - the network path was not found

I have deployed SCOM 2012 agents to most servers (2008, 2008 R2, 2012, 2012R2) in our estate but some either fail to install or are not monitored. I assume the two problems are related, but for now I am concentrating on the servers that fail completely.
Installation is from the Discovery Wizard and I have about 20 servers that fail of various server versions.
So looking at one specific server that is failing to install the agent - a 2008 standard service pack 2
The firewall in on and file and printer sharing is enabled for domain, remote administration is enabled for domain
I added a specific rule to allow TCP 5723 and 5724
DCOM is enabled
I can Ping the target server from the SCOM server by both name and FQDN - both return the same IP and our DNS server has only one entry for this server
I can browse to the admin share \\server\C$ from the SCOM Server, using the same account that I specify for the agent install that is a domain admin with rights on this server (and on the other servers the agent
did install to) and the server has plenty of disk space available
I am not sure what else to look at so would welcome any ideas
Thanks

Hi Petro,
I have a Agent installation failure cheat sheet, For your error 80070035 it is said to perform a manual installation.
So i would like to understand which version of SCOM is this ? 2007 R2 or 2012 or 2012 r2 ?
Also check if your agents have the WMI service started and enabled ?
Also if yours is a SCOM 2007 R2 do you have a RMS & MS in your management group ? If yes then Pushing the agent installation from MS may cause such issue. So would suggest you push the installation from RMS.
Also check if your Network connectivity meets the minimum requirement as recommended by SCOM. Below is applicable for Both SCOM 2007 R2 & SCOM 2012 & 2012 R2.
Component A
Component B
Minimum Requirement
Root management server or management server
Agent
64 Kbps
Root management server or management server
Agentless
1024 Kbps
Root management server or management server
Database
256 Kbps
Also check if you have any Anti virus / Firewall which is blocking the install / communication. If yes disabe or add the "Monitoringhost.exe to the safe list or what your feature is.
Check if you have another IP assigned to the NIC card and remove it tempraurly andchecl.
Also post the event logs of the Agents which are in not monitored state for analysis.
SCOM Agent installation failure error codes
Error
Error Code(s)
Remediation Steps
The MOM Server could not execute WMI Query "Select * from Win32_Environment where
NAME='PROCESSOR_ARCHITECTURE'" on computer server.domain.com
Operation: Agent Install
Install account: domain\account
Error Code: 80004005
Error Description: Unspecified error
80004005
1. Check the PATH environment variable. If the PATH statement is very long, due to lots of installed third party software - this can
fail. Reduce the path by converting any long filename destinations to 8.3, and remove any path statements that are not necessary.
2. The cause
could be corrupted Performance Counters on the target Agent.
To rebuild all Performance counters including extensible and third party counters in Windows Server 2003, type the following commands at a command
prompt. Press ENTER after each command.
cd
\windows\system32
lodctr /R
Note /R is uppercase.
Windows Server 2003 rebuilds all the counters because it reads all the .ini files in the C:\Windows\inf\009 folder for the English operating system.
How to manually rebuild Performance Counter Library values
http://support.microsoft.com/kb/300956
3. Manual agent install.
The MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access
3. Inspect WMI health and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
The MOM Server failed to open service control manager on computer "servername.domain.com". Access is Denied
Operation: Agent Install
Install account: DomainName\User Account
Error Code: 80070005
Error Description: Access is denied.
80070005
80041002
1. Verify SCOM agent push account is in Local Administrators group on target computer.
2. On Domain controllers will have to work with AD team to install agent manually if agent push account is not a domain admin.
Disable McAfee antivirus during push
The MOM Server failed to open service control manager on computer "servername.domain.com".
Therefore, the MOM Server cannot complete configuration of agent on the computer.
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
800706BA
1. Firewall blocking NetBIOS ports
2. DNS resolution issue. Make sure the agent can ping the MS by NetBIOS and FQDN. Make sure the MS can ping the agent by NetBIOS
and FQDN
3. Firewall blocking ICMP
4. RPC services stopped.
The MOM Server failed to acquire lock to remote computer servername.domain.com. This means there is already an agent management operation proceeding
on this computer, please retry the Push Agent operation after some time.
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 80072971
Error description: Unknown error 0x80072971
80072971
This problem occurs if the LockFileTime.txt file is located in the following folder on the remote computer:
%windir%\422C3AB1-32E0-4411-BF66-A84FEEFCC8E2
When you install or remove a management agent, the Operations Manager 2007 management server copies temporary files to the remote computer. One
of these files is named LockFileTime.txt. This lock file is intended to prevent another management server from performing a management agent installation at the same time as the current installation. If the management agent installation is unsuccessful and
if the management server loses connectivity with the remote computer, the temporary files may not be removed. Therefore, the LockFileTime.txt may remain in the folder on the remote computer. When the management server next tries to perform an agent installation,
the management server detects the lock file. Therefore, the management agent installation is unsuccessful.
http://support.microsoft.com/kb/934760/en-us
The MOM Server detected that the following services on computer "(null);NetLogon" are not running. These services are required for push
agent installation. To complete this operation, either start the required services on the computer or install the MOM agent manually by using MOMAgent.msi located on the product CD.
Operation: Agent Install
Remote Computer Name: servername.domain.com Install account: DOMAIN\account
Error Code: C000296E
Error Description: Unknown error 0xC000296E
C000296E
1. Netlogon service is not running. It must be set to auto/started
The MOM Server detected that the following services on computer
"winmgmt;(null)" are not running
C000296E
1. WMI services not running or WMI corrupt
The MOM Server detected that the Windows Installer service (MSIServer) is disabled on computer "servername.domain.com". This service is
required for push agent installation. To complete this operation on the computer, either set the MSIServer startup type to "Manual" or "Automatic", or install the MOM agent manually by using MOMAgent.msi located on the product CD.
Operation: Agent Install
Install account: DOMAIN\account
Error Code: C0002976
Error Description: Unknown error 0xC0002976
C0002976
1. Windows Installer service is not running or set to disabled – set this to manual or auto and start it.
The Agent Management Operation Agent Install failed for remote computer servername.domain.com.
Install account: DOMAIN\account
Error Code: 80070643
Error Description: Fatal error during installation.
Microsoft Installer Error Description:
For more information, see Windows Installer log file "C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\servernameAgentInstall.LOG
C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\servernameMOMAgentMgmt.log" on the Management Server.
80070643
1. Enable the automatic Updates service…. Install the agent – then disable the auto-updates service if desired.
Call was canceled by the message filter
80010002
Install latest SP and retry. One server that failed did not have Service pack installed
The MOM Server could not find directory \\I.P.\C$\WINDOWS\. Agent will not be installed on computer "name". Please verify the required
share exists.
80070006
1. Manual agent install
Possible locking on registry?
http://www.sysadmintales.com/category/operations-manager/
Try manual install.
Verified share does not exist.
The network path was not found.
80070035
1. Manual agent install
The Agent Management Operation Agent Install failed for remote computer "name". There is not enough space on the disk.
80070070
1. Free space on install disk
The MOM Server failed to perform specified operation on computer "name". The semaphore timeout period has expired.
80070079
NSlookup failed on server. Possible DNS resolution issue.
Try adding dnsname to dnssuffix search list.
The MOM Server could not start the MOMAgentInstaller service on computer "name" in the time.
8007041D
80070102
NSlookup failed on server. Possible DNS resolution issue.
Verify domain is in suffix search list on management servers.
The Agent Management Operation Agent Install failed for remote computer "name"
80070643
1. Ensure automatic updates service is started
2. Rebuild WMI repository
3. DNS resolution issue
The Agent Management Operation Agent Install failed for remote computer "name". Another installation is already in progress.
80070652
Verify not in pending management. If yes, remove and then attempt installation again.
The MOM Server detected that computer "name" has an unsupported operating system or service pack version
80072977
Install latest SP and verify you are installing to Windows system.
Not discovered
Agent machine is not a member of domain
Ping fails
1. Server is down
2. Server is blocked by firewall
3. DNS resolving to wrong IP.
Fail to resolve machine
1. DNS issue
The MOM Server failed to perform specified operation on computer "name". Not enough server storage…
8007046A
1. This is typically a memory error caused by the remote OS that the agent is being installed on.
There are currently no logon servers available to service the logon request.
8007051F
1. Possible DNS issue
This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version
of the Windows Installer service.
8007064D
1. Install Windows Installer 3.1
The network address is invalid
800706AB
Possible DNS name resolution issue.
Tried nslookup on server name and did not get response.
Verify domain is in suffix search list on management servers.
The MOM Server failed to perform specified operation on computer servername.domain.com
80070040
1. Ensure agent push account has local admin rights
The MOM Server detected that the actual NetBIOS name SERVERNAME is not same as the given NetBIOS name provide for remote computer SERVERNAME.domain.com.
80072979
1. Correct DNS/WINS issue.
2. Try pushing to NetBIOS name
Gautam.75801

WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
but that didn't gain me anything.
I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
PowerShell Error:
Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (:) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionStateBroken
winrs Error:
Winrs error:
WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config.

Hi Adam,
I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
WSMAN/<NetBIOS name>
WSMAN/<FQDN>
If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
this to learn a bit more about selective trusts and whether or not it's affecting you.
Cheers,
Lain

MDT user credentials error: Invalid credentials: The network path was not found

I have DELL E5400 and DELL Optiplex 760 pc. In the before, DELL630 is working with my MDT service, but now, DELL E5400 and DELL Optiplex 760 not working with my MDT.
When PE loaded and go to User Credentials interface, I input the user name and password(I confirm the user name and password is correct), it will display error message "Invalid credentials: The network path was not found". I checked that the network driver is correct.
After search some information in the website, someone said that maybe the network initializing timeout issue, so I according to Tim Quan guide to add following to startnet.cmd
wpeutil InitializeNetwork
ping localhost
wpeinit
Then I update the deploy location in MDT and then re-loaded it again, but unlucky, I still meet the same issue. I tried to use ipconfig /all command to check the network status, I couldn't find out local network connection. I click "Cancel" to check the error message, it will display"A connection to the deployment share could not be made. The deployment will not proceed. DHCP lease was not obtained for any networking device!Possible cause: check physical connection".
It seems that PE not loaded network driver successfully, but it is very strange that the network driver is correct.
Have someone can help me?
Thanks a lot

Hi,
Are you deploying Windows Vista 32bit or 64bit? Please obtain he latest network card drivers from the following sites:
Dell Latitude E5400:
http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=LAT_E5400&os=WLH&osl=en&catid=&impid=
Dell OptiPlex 760:
http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=PLX_760&os=WLH&osl=en&catid=&impid=
Please make sure you add the correct network driver to deployment point.
Additional Information:
http://www.techtalkz.com/windows-deployment/501217-deployment-share-connection-issue-since-mdt-2008-waik-1-1-a.html
http://www.deploymentforum.com/Community/Forums/tabid/124/forumid/16/postid/737/view/topic/Default.aspx
Hope it helps.
Tim Quan - MSFT

Error Code 0x80070035 - The network path was not found, Windows Server 2008 SP2

I have bee receiving following "error code 0x80070035 - The network path was not found" when trying to open file shares in both directions using Windows Server 2008 Standard SP2 at both ends. The issue is identical to the KB article KB958285, however the hotfix is only valid up to but not including SP2. One of the servers in question has moved several times between 2 subnets seperated by a VPN. I have tried changing settings in and around the local NIC/DNS Suffix and in the network connection sharing centre, but with no luck. Firewalls are turned off at both sites, and pings and AD queries are successful (one server is a DC). DNS is also working correctly at both sites. Any help/suggestions would be appreciated.
Richard

I thought I would add in another scenario, since this link came to the top of my list in the search engine.
We are running 2008 R2 with SP1 (it happened without SP1 as well)
We could not map using UNC (IP, FQDN, or netbios name). We could ping access the other servers via other utils like event viewer and services.msc but just could not map.
In our case it turned out to be a VMWARE issue but we still had to make a regedit change first
You have to go to regedit HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\
And add LanmanWorkstation to Providerorder
I found on a Citrix board that citrix has an issue with this as well
If you're running VM here is an additional step you should do as well
When you upgrade VMware Tools installed with HGFS from ESX 3.x to ESX 4.x, the HGFS driver may not get uninstalled properly. In this case, the virtual machine's network Provider Order tab in Network Connections
> Advanced > Advanced Settings displays incorrect information and the virtual machine may lose network connectivity.
To avoid this issue, uninstall VMware Tools 3.x before installing VMware Tools 4.x.
To workaround this issue, if you have already upgraded VMware Tools:
Click Start >
Run, type regedit, and click OK. The Registry Editor window opens.
Navigate to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\.
Delete the reference to
hgfs.
Reboot the virtual machine.
We found that if you strip out the HGFS, you do not have to reboot for the provider order tab to come back
I hope that this saves people a lot of time. I spent days researching this.
This was the solution for me on 2008 R2 DC w/ Exchange. I do not have VMWare installed but do have Hyper-V. Thank you so much!

Save on Network path not possible

Similar Messages

Maybe you are looking for