Save on preview

Hi,
DW saved a file on preview but for some reason it has
stopped.
Can anyone help me find out how to restore that?
thanks
Joe

ok now
"joe" <[email protected]> wrote in message
news:ee68rj$o7k$[email protected]..
: Hi,
: DW saved a file on preview but for some reason it has
stopped.
: Can anyone help me find out how to restore that?
: thanks
: Joe

Similar Messages

Eprocurement Requisition upon "save and preview Approval"

Hi,
We have implemented eprocurement module 9.0 ver and found a strange problem.
After creating a requisition,while we click the button -"Save and preview Approvals" it shows the approval path.
If we happen to edit the requisition twice or thrice and again click the button-"Save and preview Approvals" its not showing the approval path.
would like to know:
1>if the changes to the requisition are saved ?
2>Why is there no approval path on clicking button--"Save and preview Approvals" after we edit a requisition more than twice ?
is it a delivered bug?
Thanks.

No problem Niesa. When you do get permission to post a screen image use the camera toolbar icon as indicated below. It is much quicker as the attachment method has to be moderated before we can see it.
Incidently we found that the only way around this was to rearrange the content inside the d-d.
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.

How to edit a pfd document then save using Preview?

I received a form in pdf format. I need to fill out some blanks with text and e-mail it back to the sender. I could not figure it out using Preview. Actually I tried the Adobe acrobat reader also and had zero success. Thanks
Bob

Daniel Kiechle wrote:
I know Acrobat Reader 8 won't let you save a filled-in PDF form.
Then you know wrong. I do this routinely.
No, you are wrong. I just tried it 2 minutes ago. Neither Adobe Acrobat 7 nor 8.1 will allow you to save a filled-in PDF form. You cannot preview. You cannot print to PDF. All you can do is Print.
Why do you need to print the filled-in form to a PDF file? You just save it; it's already a PDF file!
Because saving is disabled in Adobe Reader. Usually, if one is using a fill-in PDF form, it is some important document such as a tax form. It is always a good idea to keep an electronic form of such documents. The free Adobe Reader will not allow you to do this.
As I stated above, you can fill in and print with Preview, +but you cannot save.+
No, I can save a filled-in form to PDF using Preview. It is no longer editable, but I have an electronic copy of what I entered. That is impossible using Adobe Reader.
I really did not want to respond, and from now on I will not,
Good!
but if you say that you know Adobe Reader 8 won't let you save a filled-in PDF file, then you are spreading misinformation, and this is a disservice to those people who come here for answers. I save filled in PDF forms all the time; in your opinion, am I routinely doing the impossible?
Apparently, you must own the full Adobe Acrobat package. That will allow you to do all sorts of things with a PDF.
I think getting to the bottom of what works and what doesn't in a thread titled "How to edit a pdf document then save using Preview" is hardly doing a disservice. I appreciate your giving me the inclination to try a fill-in form using Preview again. I am quite pleased to learn that PDFView and Preview (in Tiger and Leopard) will allow you to enter data into a filled-in PDF form. Somehow I missed that. Often, it is a good idea to go back and re-try something even if you are sure you know the results. Sometimes things change underneath without your knowledge and sometime your knowledge expands to allow you to accomplish what had before been "impossible."
You can sigh all you want. But please, check your facts next time. And a bit more civility would be appreciated too. Sometimes people are wrong. That's life. The purpose of this discussion forum is not strictly to respond to questions without further elaboration. I am not here trying to make myself look smart. I am here because sometimes the questions posed are interesting and make me think. I often learn something new while trying to help someone else. That is exactly what happened in this thread. If such elaboration were not allowed, then the only people answering questions would be those who want people to think they are smart or are trying to sell some book. That would truly be a disservice.

I'm going crazy... Save RAM Preview

in AE CS5 when i click and drag (changing an effect value on Effect Controls panel, draging timeline indicator or even moving a layer in Composition panel) Save RAM Preview appear. it means after i released the mouse button AE automatically starts to make a preview.
do you believe that?
i don't know what should i do!!!!
My System:
CPU: Intel Core2 Quad Q9300 2.50GHz
RAM: 4 GB DDR3
Graphic: Radeon X1900 512 MB
OS: Win7 64bit
also i have a Matrox RTX2 video card with updated driver.
i tried to solve this silly problem with uninstalling matrox and reinstalling after effects but the problem still there.

Got it!!!
THIS PROBLEM APPEAR BECAUSE OF "CAMTASIA STUDIO 6"
i uninstalled that and the problem gone

LiveCycle 8.0 saves and previews very slow

I have a file that is about 75 pages long, and a total of less than 1000 fields. It takes over 5 minutes to save or preview. What could be wrong?
It loads fairly fast in Reader -- less than 30 seconds.
I'm developing on Vista Home Premium, 2 GB Ram.
Help!

Any hints would be appreciated! :-)
Thanks!

Safari 5 doesn't saves webpage preview images

Safari doesn't saves webpage preview images. It only save images for my Top Sites pages.
When I look in my history cover flow I only see blank Safari symbols (except history from my Top Sites webpages)
Well I really want to see full cover flow.
How can I fix this?
By the way, the Reader feature really cool and very useful.

By the way, I finally gets history to be saved. It fixed by Safari 5.
Yes, I saw your post on that one ... at least some incremental progress is being made ...
There's an area of Discussions (available only to the level 4 or 5 users) where we can post information about trouble we see out in the "public" forums ("Notable New Technical Issues"). I've been updating a thread on this issue with your progress so far with this. (I'm not sure if the Safari developers watch that though ... but just in case, I've been stashing info about this there.)
In the meantime, it's probably worth submitting a bug report via the "Help > Report Bugs to Apple" or the Apple Bug Reporter thing (if you've registered as an Apple Developer).

I LOST ORIGINAL PHOTOS - HOW TO SAVE JPEG PREVIEWS

EXTERNAL HARD DRIVE CRASHED HAVING A BUNCH OF ORIGINAL PHOTOS ON IT. WHEN I WENT INTO LIGHTROOM...THERE THEY WERE...YES..AS THE JPEG PREVIEWS FROM A CATALOGUE...WITH THE LITTLE QUESTION MARK ON THE SMALL THUMBNAILS REMINDING ME THEY ARE GONE. BUT - I CAN STILL SEE THEM.....
QUESTION: HOW CAN I SAVE THESE PREVIEWS AS IMAGES ONTO MY MAC COMPUTER? I REALIZE THEY AREN'T PRINTABLE QUALITY...BUT...AT 5X7 IN LIGHTROOMS PREVIEW WINDOW...I'D BE THRIIIIIIIILLED TO HAVE AT LEAST THAT. THX

For LR2 there was a LR plugin to do this, I think, although I have never used it:
http://regex.info/blog/lightroom-goodies/preview-extraction
However, for LR3 the following was suggested on the LR2 plugin page:
http://imageingester.com/LRViewer-info.php
I found both of these buy Googling:

SAP command to save the previewed form to pdf

Hi,
Does anyone know the sap command you type in the command line to save the previewed form to pdf in ECC 6? Saw it somewhere but just can't seem to recall it. Thanks!
Best Regards,
Kristine

HI,
Use program RSTXPDFT4 to convert your spool to PDF.
on the printer preference dialogue box,check create new spool check box.
click on print.
Goto SPO2 note your spool ID.
Provide that spool ID on the selection screen of the program.
you will be asked for the target file location.
Execute it.Spool will be converted into PDF.

Specifying start/end of "Save RAM Preview"?

I save RAM previews to preview comps with real-time audio, since AE's RAM Preview lags on audio, preventing me from syncing video and audio. When I save the RAM preview, it starts slightly after where I have it set in AE and ends much earlier. How do I specify the RAM preview start/end parameters?

You can specify beginning and end of the duration to be previewed by setting a work area.
That doesn't necessarily seem relevant to your problem of lagging audio.
If audio and video are out of synch, then please file a bug with details about version numbers of software, kinds of footage, et cetera. You can send bug reports to aebugs <at> adobe <dot> com.

With mouse moving auto Save Ram preview

Please let me know about my this problem, when i start my After Effects CS4 and i open new compsition, and import some images so when i drag them to timeline and when i move my mouse on any track, frequently and automitaclly it opens the Save Ram Preview, every time with every mouse move so i don't know what to do with that i searched more in After Effects menuse to improve that but i couldn't.

Good Day Sir,
I have one wirless Laser Mouse and i don't have any other softwares for shortcuts.
Thank you a lot....

DW8 Save before preview

Hello,
I am not new to DW, I have used MX a lot. I have just started
using DW8 this morning and it seems very pretty and it looks like a
lot of new tools will be very helpful. I am frustrated that when I
want to preview even the SMALLEST change, DW asks me to save. If I
say no, it previews the previously saved document rather than my
current code.
This I fine VERY VERY annoying as I can fire through many
change/preview cycles inside a couple minutes and saving just takes
more time. Further, I am not sure I want to save it until AFTER I
see the effect of my change.
Is there anyway to stop DW8 from asking to save and render
the from code from memory as opposed to disk-saved code. I PREFER
to decide when to save on my own (just like deciding when to wear
my seat belt!!). :-)
Thanks for any help.
P.F.

If you elect to use temp files in Preview in Browser, you
will not be asked
to save first.
> basically a snapshot of the file in its current state
While true, it's a great deal more than just this. All root
relative links
have been converted to document relative, all include markup
has been
written to the page, all CSS has been written to the page,
etc.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Ric G" <[email protected]> wrote in message
news:f8ldbb$pti$[email protected]..
> You'll find a checkbox in the preview preference that
lets you preview
> from a
> temporary file--basically a snapshot of the file in its
current state. You
> may
> still get asked if you want to save first, but you can
say no and you will
> still see the preview.
>
> Ric
>

I can not get a file to save in preview after editing it

I have a jpeg file in preview that needs to be editted. I duplicated it, then did the edit. It will not let me save it. I tried to put it in iphoto but the colors changed when I did that.

What happens when you try to save it?

Unable to save or preview in browser.

When I try to view my work in my browser , initially I am
asked to save my work, and when I click save, I get an error
message:
Access to Macintosh HD denied.
I therefore can't save any work and the only way I can quit
the program is to force quit, losing my work.
I have tried repairing permissions.
Please can you help me?
Mike

> When I try to view my work in my browser , initially I
am asked to save
> my
> work
Try editing PREFERENCES | Preview in Browser > Enable temp
files. Can you
preview now?
> get an error message:
Access to Macintosh HD
> denied.
What happens if you create a new file in DW and save it
immediately? Can
you save it? Are you working from a defined local site?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"MikeTwisse" <[email protected]> wrote in
message
news:gfelkd$amc$[email protected]..
> When I try to view my work in my browser , initially I
am asked to save
> my
> work, and when I click save, I get an error message:
Access to
> Macintosh HD
> denied.
> I therefore can't save any work and the only way I can
quit the program is
> to
> force quit, losing my work.
>
> Please can you help me?
> Mike
>

A session saver for Preview.app

Hi,
I was wondering if there was a plugin for Preview/ program that would save the session of open pdf files when Preview was last closed. I use such a feature for Safari and Firefox, a session saver that reloads tabs that were present the last time.
I access a lot of pdf files at a time and it is sometimes cumbersome to look them all up again when I restart Preview for some reason.
The recent documents list doesn't exactly give me what files were currently open.
Thanks for the reply,
Sri

Srisri:
I think the closest thing you'll find (within Preview itself) is the 'Bookmarks' feature. A bookmark set for one PDF document during one 'session' will be retained for a next session... and can be called back by invoking the same bookmark... even after quitting Preview.
Peter B.
-----

Problem with save ram preview

Hi guys, thank you for coming
i haven't this problem but now i don't know about that!!! when i chang a value or handle the time line or set an effect and other things mabye, it go to take a preview of my project and at the end it want to save that, but this problem sometimes will be happen and sometimes won't happen. i thought that my keyboard keys are sticked and i changed my keyboard but the problem still was there. i go to my prefrences but didn't find illegal option. i somebody know about that tell me please!!!
thank you for reading

I am using 10.8.6
The current MacOS X releae is 10.8.4 - is that your version?
when I try to save .jpg files and others while using Preview no location choices are given. Also, if Move To, Rename, etc. are selcted nothing happens other than the File menu being seleced.
The "Save" menu entry will just write to the old location, so if you want to save to a different location and to change the format, use "Export". That will bring up the File choser dialog.
"Move to", "Renam"e will highlight the document name in the titlebar of the document. You are supposed to change the name there.
For example, after using the "Rename" command, type a new name right into the textfield in the title bar:
After changing the name of the document the next "save" will show a file choser dialog.
Regards
Léonie

Dreamweaver sharing violation on save after previewing file

Hi all,
First, have I mentioned that I LOATH Windows Vista with every
fiber of my
being!
On to the problem at hand.
I'm in Dreamweaver and I edit, then preview a file. Next I
edit it some more
and then try to save it - but cant. I get an alert stating
that there is a
sharing violation because the file is being used by another
program, and it
just stays this way, even if I shut the browser down. even if
I restart
Dreamweaver it's still locked. The only way I can get it to
let go is to
totally reboot!
Has anyone else run into this? Found a solution?
Thanks for your help.
Lawrence Cramer
Cartweaver.com

This is a multi-part message in MIME format.
------=_NextPart_000_006F_01C8550D.5C555090
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I haven't Larry, but let me just double-down on your Vista
loathing. I =
find it ridiculously slow and awesomely awkward. How many
times do I =
have to wait out a "not responding" message when I just
switch to a =
program? How often do I have to change my open file dialogs
back from =
their stupid photo default headers (like Date Taken)? Why do
I have to =
always hard boot my external firewire drive everytime I come
back from =
sleep mode?
If I wasn't doomed to always have the latest OS for screen
shot reasons, =
I would have jumped back to XP months ago.
Thanks for letting me vent - and good luck finding a solution
to that =
issue.
Best - Joe
Joseph Lowery
VP of Marketing, WebAssist
Author, Dreamweaver CS3 Bible
"Lawrence Cramer" <[email protected]> wrote in
message =
news:[email protected]...
Hi all,
First, have I mentioned that I LOATH Windows Vista with
every fiber of =
my=20
being!
On to the problem at hand.
I'm in Dreamweaver and I edit, then preview a file. Next I
edit it =
some more=20
and then try to save it - but cant. I get an alert stating
that there =
is a=20
sharing violation because the file is being used by another
program, =
and it=20
just stays this way, even if I shut the browser down. even
if I =
restart=20
Dreamweaver it's still locked. The only way I can get it to
let go is =
to=20
totally reboot!
Has anyone else run into this? Found a solution?
Thanks for your help.
Lawrence Cramer
Cartweaver.com
------=_NextPart_000_006F_01C8550D.5C555090
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.6000.16587"
name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>I haven't Larry,
but let me just =
double-down on=20
your Vista loathing. I find it ridiculously slow and
awesomely awkward. =
How many=20
times do I have to wait out a "not responding" message when I
just =
switch to a=20
program? How often do I have to change my open file dialogs
back from =
their=20
stupid photo default headers (like Date Taken)? Why do I have
to always =
hard=20
boot my external firewire drive everytime I come back from
sleep=20
mode?</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>If I wasn't
doomed to always have the =
latest OS for=20
screen shot reasons, I would have jumped back to XP months =
ago.</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Thanks for
letting me vent - and good =
luck finding=20
a solution to that issue.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>
<P>Best - Joe</P>
<P>Joseph Lowery<BR>VP of Marketing, <A=20
href=3D"
http://www.webassist.com/">WebAssist</A><BR>Author,
<A=20
href=3D"
http://www.idest.com/dreamweaver/">Dreamweaver
CS3=20
Bible</A></P></FONT></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT:
5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Lawrence Cramer" <<A=20
=
href=3D"mailto:[email protected]">[email protected]</A>>
=
wrote in=20
message <A=20
=
href=3D"news:[email protected]">news:fm8rel$s87$1@forums=
.macromedia.com</A>...</DIV>Hi=20
all,<BR><BR>First, have I mentioned that I LOATH
Windows Vista with =
every=20
fiber of my <BR>being!<BR><BR>On to the
problem at hand.<BR><BR>I'm in =
Dreamweaver and I edit, then preview a file. Next I edit it
some more =
<BR>and=20
then try to save it - but cant. I get an alert stating that
there is a =
<BR>sharing violation because the file is being used
by another =
program, and=20
it <BR>just stays this way, even if I shut the browser
down. even if I =
restart=20
<BR>Dreamweaver it's still locked. The only way I can
get it to let go =
is to=20
<BR>totally reboot!<BR><BR>Has anyone else
run into this? Found =
a=20
solution?<BR><BR>Thanks for your
help.<BR><BR>Lawrence=20
Cramer<BR>Cartweaver.com<BR></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_006F_01C8550D.5C555090--

Save on preview

Similar Messages

Maybe you are looking for