Save options while exporting to pdf

I do export in pdf often, and each time I see 3 checks (Pring each stage of build, add borders.., Include date), which are very annoing, since I don't need them at all and have to switch off all this great features. How to switch them off permanently?

You can minimize the margins considerably by unchecking two options and having your image slightly larger than the slide (there is a limit, of course).
By using the Print option, the setting you set in the Print Dialogue, stay as you last set them rather than reset each time. This should meet that objective. Try it.
The other choice is to uncheck those pesky boxes each time you Export a PDF.
Good Luck.

Similar Messages

JDF Option while Exporting PDF

Hello All,
Under CS4 while exporting the PDF I want to enable the JDF option through plug-in. Has anyone tried doing the same. Where to look for in SDK. Would be great to get any help on this.
Thanks in Advance.
Regards
Farzana.

Dov Isaacs, Adobe Principal Scientist, and maybe the most knowledgeable person about this at Adobe wrote this in 2008:
"(1) InDesign 4 (=CS2) attempted to avoid CID encoding as much as reasonably possible, but there were no changes in this for InDesign 5.
(2) Use of the Distiller to produce PDF either from InDesign or any other application does NOT guarantee that you won’t get CID encoding. In fact, the Distiller uses CID encoding for optimization its conversion of PostScript to PDF.
(3) CID encoding has been an integral part of both the PostScript specification since 1996 (although it is supported by most PostScript Level 2 devices) and the PDF specification since PDF 1.3 (Acrobat 4 – 1999). In reality, if a print service provider (or a content creator) is using software that is NOT CID-encoding compatible, it is saying that software is being used that is also most likely incompatible with ICC color management, transparency, layers, and JPEG2000 image compression. This is a recipe for disaster for print customers. If your print service provider has problems with CID encoding, you should seriously question whether your print service provider is competent to handle your 21st century print needs with 20th century workflows and tools!"
For reference, see this InDesignSecrets.com posting in 2008:
http://indesignsecrets.com/cid-identity-h-fonts-are-back.php
Dov's opinion is written in the comments.

InDesign doesn't let embed the font while exporting to PDF

I used a font while working on a document in InDesign and later while exporting to PDF I got a warning that the software is unable to include that font.
Is there a way to go around it? It was a free cyrillic font and it's not possible to buy it. I suppose creating outlines is not the right way to go
Thanks in advance

Eugene Tyson wrote:
… Most free fonts that I know of don't allow embedding - for this reason it's not a good idea to use a free font. …
I'm no particular fan of so-called “free fonts” — you most often get exactly what you pay for. However, that having been said, in my years of gathering such fonts for debugging and problem solving, in fact very few of them are actually set with the protection bits to prohibit embedding. For TrueType and OpenType fonts, you can readily check outside of InDesign as to whether a font is embeddable in a PDF file. For Windows, right-click on a font file and check the properties; embedding privileges are described in one of the tabs. For MacOS, the FontBook utility can provide the same information for a font.
The problem is that when you attempt to use a font that is physically protected against embedding, you pretty much need to follow the advice given by Eugene. Personally, I would recommend the use a different font option, checking the font prior to using it for your rights to embed it in PDF.
Note that font licensing is legal minefield. Many fonts that are posted on-line are not really free. Some are shareware with restrictions in their written licenses that require payment for commercial use (often in ReadMe files which may somehow be “lost” when such fonts are reposted over and over again) or even pirated fonts (i.e., commercial fonts simply illegally posted on-line).
My personal recommendation is that for any commercial use, you explicitly license your fonts from a known, reliable source to avoid possible legal issues in the future.
- Dov

Error while exporting in pdf in crystal report XI

Post Author: Siddheswar
CA Forum: General
hi
I am getting the following error in crystal report XI while exporting to pdf.
The Error:
Method 'ISCREditableRTFExportFormatOptions_reserved5' on type 'CrystalDecisions.ReportAppServer.ReportDefModel.EditableRTFExportFormatOptionsClass' from assembly 'CrystalDecisions.ReportAppServer.ReportDefModel, Version=11.0.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' is overriding a method that has been overridden.
Please Help.
Thanking in advance.
Regards
Siddheswar

The stack trace is caused by whitespace in your CrystalReportViewer.jsp file. Look up SAP Note 1199025 for the resolution.
It's not related to the PDF formatting issue. There's been changes to the formatting with the most recent version - Crystal Reports for Eclipse 2.0 - so if you haven't already, I recommend you upgrade.
Note that there's differences in font metric calculation when using Adobe PDF format such that there's no way to get exact agreement between output of the CR and PDF. But the latest version helps greatly.
Sincerely,
Ted Ueda

Remove back image while exporting to PDF (InDesign CS4)??

Hi All,
I have two images in my InDesign CS4 file and one image is hiding behind my second image. When I am exporting my InDesign file as Pdf and opening in Acrobat, Acrobat showing bottom image first and then showing my top image.
Is there any way to remove my bottom image which is appearing behind in my top image while exporting to Pdf.
I don't want remove manually because it happening with most of my InDesign file.
Please suggest.
Thanks
Baljeet

I would move bottom image to separate layer and then eventually I would switch it off.
If you don't want to change anything in InDesign you can eliminate the second image in your already generated PDF.
Open your PDF in Acrobat Pro.
Advanced -> Print Production -> PDF Optimizer.
You can leave only "Clean Up" check box marked (eventually Transparency if Acrobat will not allow you to switch it off). All the rest leave unchecked.
This operation will remove hidden image.
Correction: It will not remove the image. It just made the PDF to be displayed much more faster that is why the second image appearance was not noticeable. Sorry for the inconvenience.

Problem while exporting to PDF with japanese character in Crystal Report X1

Hi,
I am using Crystal report X1 with classic ASP on a Windows 2003 Enterprise Server, SP 2. In my application, I have to export the report into PDF, CSV, DOC formats. I am have Japanese strings in the report. While exporting to PDF, empty boxes has displayed in the place of Japanese string and in CSV file, question mark has been displayed instead of Japanese string. But the Doc file is exported correctly. I have not installed any language support software either in server or in client machine. I have used MS Gothic and Arial Unicode MS fonts for the text-objects which has Japanese strings.
Please give me a solution so that I will get PDF file with Japanese strings instead of empty box or question mark.
Do I need to install any language support pack software?
Thanks in advance.
Regards,
Manju

Hi Don,
Thank You for your reply. I have resolved the issue of exporting to pdf from crystal report X1 having Japanese data after installing the language pack.
But when I am exporting to CSV or TXT, i am getting ??? instead of Japanese characters. I have tried "export" through crystal report designer and got ??? instead of Japanese.
The Crystal report version I am using is Crystal report X1 11.0.0.1282
Crystal Report Desinger is installed in Windows Xp machine
Font set for Text object is Arial Unicode MS, MS PMincho, MS PGothic
Does the Crystal report X1 11.0.0.1282 has the UTF-8 support for CVS / txt
Please provide me a solution
Thanks in advance,
Regards,
Manju

IllegalArgumentException: While exporting to PDF in Websphere 6

Hi,
 
We are using Crystal Report XI and Java 1.5. We are using JRC jars to parse the Crystal Report in Server side. From our application we will export the report to PDF. It is working fine for all reports except for a specific report where it gives IllegalArgumentException while exporting the PDF. The same report is working fine in Windows Environment. Only in Linux environment the below error occurred. It will be of great help if any one can suggest us on this.
 
Exception: 
 
[1/31/11 13:31:13:397 CST] 00000026 SystemOut O Openning rowset 
[1/31/11 13:31:13:399 CST] 00000026 SystemOut O Executing query: null 
[1/31/11 13:31:13:401 CST] 00000026 SystemOut O PdfExporter: serializing pdf document and cleaning up 
[1/31/11 13:31:13:401 CST] 00000026 SystemOut O Disk Exporter: verifying export to destination 
[1/31/11 13:31:13:401 CST] 00000026 SystemOut O Disk Exporter: no output file was created by an exporter 
[1/31/11 13:31:13:407 CST] 00000026 SystemOut O PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob (from destination?); aborting export 
java.lang.IllegalArgumentException 
 at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source) 
 at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source) 
 at com.crystaldecisions.reports.a.e.if(Unknown Source)
 at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
 at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
 at com.businessobjects.reports.sdk.b.i.int(Unknown Source)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)
 at com.mysystem.myapp.common.Crystal_Report.print(Crystal_Report.java:447)
 at com.ibm._jsp._Crystal_Report._jspService(_Crystal_Report.java:305)
 at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:87)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
 at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1146)
 at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1087)
 at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
 at com.mysystem.myapp.common.ServletFilter.doFilter(ServletFilter.java:107)
 at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
 at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
 at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
 at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:837)
 at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:680)
 at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:588)
 at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:481)
 at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:122)
 at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionServletWrapper.handleRequest(AbstractJSPExtensionServletWrapper.java:232)
 at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
 at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:748)
 at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1466)
 at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:122)
 at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:458)
 at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:387)
 at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
 at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
 at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
 at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
 at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
 at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:196)
 at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:751)
 at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:881)
 at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1497) 
[1/31/11 13:31:13:408 CST] 00000026 SystemOut O Disk Exporter: finalizing export to destination 
[1/31/11 13:31:13:408 CST] 00000026 SystemOut O JRCAgent203 detected an exception: java.lang.NullPointerException 
[1/31/11 13:31:13:413 CST] 00000026 SystemOut O 2011-01-31 13:31:13.411 30706059IBN_IBON MARMAGOST Crystal_Report.print(748) Error while generating crystal report 
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.NullPointerException---- Error code:-2147467259 Error code name:failed
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)
 at com.mysystem.myapp.common.Crystal_Report.print(Crystal_Report.java:447)
 at com.ibm._jsp._Crystal_Report._jspService(_Crystal_Report.java:305)
 at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:87)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
 at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1146)
 at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1087)
 at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
 at com.mysystem.myapp.common.ServletFilter.doFilter(ServletFilter.java:107)
 at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
 at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
 at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
 at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:837)
 at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:680)
 at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:588)
 at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:481)
 at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:122)
 at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionServletWrapper.handleRequest(AbstractJSPExtensionServletWrapper.java:232)
 at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
 at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:748)
 at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1466)
 at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:122)
 at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:458)
 at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:387)
 at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
 at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
 at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
 at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
 at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
 at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:196)
 at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:751)
 at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:881)
 at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1497)

I recommend searching on that Exception message first.
Sincerely,
Ted Ueda

Newbie here: best sizing option while exporting for print?

What is an ideal/standard option for exporting and sizing a photo for print when you don't know if they will print 4x6, 5x7 or 8x10? Is there a good option that will consider anything? Bottom line: best sizing option while exporting? Thanks

If you don't know the size that someone will print at, then you don't resize at all. Leave the Resize to Fit box unchecked in the Image Sizing portion of the Export dialog box Let the person doing the printing do the resizing (if necessary)

DrillDown Option not Working while Export To PDF in SSRS

Hi Friends,
I worked on ssrs report used DRILLDOWN option. When I export drilldown report to pdf, with groups collapsed, pdf shows no data and no +/- on the left of the group name. Basically, it shows no data and no option to drilldown(only header)s .
When this report is exported to Excel, it is perfect and works exactly as it would in VS2005.
Any setting to make sure an expanded report is exported to pdf? Or do i manually expand all drilldown options and then export?
Thanks in advance.
Thanks and Regards,
LuckyAbdul

Hi LuckyAbdul,
From the
document, we can know that “Dynamic show and hide elements are not supported in PDF. The PDF document is rendered to match the current state of any items in the report. For example, if the item is displayed when the report is run initially, then the
item is rendered. Images that can be toggled are not rendered, if they are hidden when the report is exported.”
So just as Visakh said, this behavior is by design. If we want to see entire data in PDF, we should expand the node (click the plus signs (+) in the report) to show the demanded detail data ahead, then export the report to PDF.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

HTML Tags escape while exporting to PDF

Hi friends,
I have two columns in my BI report like
Business Group(BG) and OU
Since in the BG column under the edit formula i used the html tags to show each and every BG column value in bold like below
'' || "D1.Company"."Business Group Full Name" || ''
Now the report is appearing fine in answers and dashboard but when i export the same report to PDF i can see the html tags in each and every name of the BG group.
Is there anything to be done to escape these html tags in PDF while exporting.
And also if we give the tooltip for the numeric columns like below under the column properties-->Data format-->Custom like
[html]#
And after that if i tried to escape the same report with the tooltip on the numeric column to pdf means, the number values are missing for the entire column in the PDF, but this case is not appearing while exporting the report to pdf if i set the tooltip to the text column, as the values is missing only for the tooltip of the numeric column. What could be the fix for this problem.
Thanks
Regards,
Saro

Hi svee,
Thanks for the reply.
For an example i tried with the bold option in the edit formula inorder to portray the html tags problem while exporting it to the pdf inspite of using the default bold option within the column properites like u said.
Suppose if i used html tags like
 , 
in the edit formula section or if i used any other html tags which is not present as a default option in bi like bold. At that time while exporting the report to pdf i can face the issue.
And also i need ur suggestion regarding with the values disappearing for the numeric column if a tooltip is used in it while exporting it to the pdf.
Regards,
Saro

InDesign crashes while exporting to PDF

I have one PDF that after placing in InDesign cannot be exported to PDF
InDesign crashes on Windows and Macintosh, versions from CS3 to CC
Any ideas what can be wrong with my PDF?

I reckon you might find that you have font clashes as your PDF is being created. I had a similar issue a few weeks back where I had created a Brochure, sent it to the client, went through rounds of amends, and the final round of amends prior to print sign off was sent in a word document. When I opened the word doc, I copied and pasted the amends, all looked fine, so I created one last PDF... crash.
I ahve a suspicion that word auto-activated a font that didn't agree with fonts within the InDesign file. I deactivated many fonts, restarted my Mac and hey presto... sorted!
Now, the PDF that you imported into your InDesign file may well be the culprit activating a dodgy font, and this becomes a bit problematical. So, you could open it in Photoshop and save it as a high res image, or you could open it in Illustrator and hopefully all text has remained in place and will enable you to ouline fonts and save it as an illustrator file... BUT, you must advise and get your client to check the contents of the resultant file if you go down either of these routes.

Deleting Extension while exporting to Pdf or Postscript only hide it

Hi all,
I need to be able to delete the "ps" or "pdf" extension while exporting to a pdf or postscript file in the printing menu on macosX.
When i try to delete the extension in the saved name, it quote the "hide extension button" and when unquoting the "hide extension" button, the extension re-appears.
How can i change this issue?
Thanks in advance.
Julien.

Welcome to the forums Julien!
I'd be very curious as to the "need" to do this, but it appears you're 100% correct. It seems you can only rename it after the fact to lose the .ps or .pdf.

Using the JRC, RTF embedded in Crystal while exporting to PDF

Are there enough acronyms for ya? I donu2019t think so either.
I am wondering if anyone else has experienced the problem I am facing and what fix, if any, did they find. I have RTF data stored in the database I am trying to read into a report. I set the text interpretation to RTF on the field and u201Cyeah!!u201D I have formatted RTF data as the user entered it in a RTF editor.
While using the JRCu2019s exporter to obtain a PDF format, the formatting set in the RTF tags is no longer being honor during the export (it shows up unformatted when I open the report in Adobe Reader and so my PDF display in code is also off).
Has anyone else encountered this and what did you do to fix it (or was it fixed)?
My little about my environment:
-JVM 1.5
-Crystal jars version 11.8.5
-Eclipse 3.4
Did I miss anything?
From what I have read on here, it sounds like the Crystal jar 12.2.2 is better at supporting fonts in PDF exports but there is something in the sample code not allowing me to use a JDBC connection over a JNDI connection so I will have to get back to whether it is fixed under 12. Regardless though, version 12 is not really a good solution for us for I believe this to be Crystal 2008 which we are not budgeted to license so I need to stick with CR XI R2 jar files.
I also found this in the thread entitle Greek fonts doesnu2019t appear on pdf export : u201CExport it to editable RTF and then using Word 2007 has a plugin that allows you to export to PDF format which will embed the fonts.u201D Is this what I need to do to display fonts that are normally found on a Windows installation (ie Arial, Times New Roman, Courier, etc.)?
Thanks in advanced for any light you may shed on this.

Moved to the Java Development - Crystal Reports forum.
Ludek

Retaining original font in CR2008 while exporting to PDF

Hi,
Do we have a fix/patch available for retaining the original font when exporting to PDF in 2008 yet? The solution i see is to update the registry files. Do we have any other solution like a fixed dll file or a patch already available for download at SAP website?
I cannot update the registry settings as it is not allowed where i work so need a patch/fixed dll file to get rid of this issue.
Your quick response is greatly appreciated.
Thanks

Hi,
Are you sure it is the 'Font' that is not being retained? Or is it the size?
The only workaround like you said is the registry key and unfortunately, there is no Fix Pack available to address this issue.
-Abhilash

Error while exporting to PDF - Operation not yet implemented

Hi,
    We using C# Dot Net 2005 and Crystal Report for Dot Net 2005 and we are trying to export to PDF file. In one of the reports, we are using a Font "Shree-Kan-0850' from Shree Samhita, a SDK to build application in Indian regional languages. But we are getting an error as follows:-
"Error in File C:\Document~1....\{....}-.rpt: Operation not yet implemented.". When we tried in various sites and forums found that it was due to some non-standard fonts. We have checked that if we remove Shree-Kan-0850 font from report, it works fine and once included the error comes. So problem might by from this font. Whether Crystal report is not supporting other than Windows standard fonts or the problem with PDF? Because with same font we can export to DOC, XLS etc. Please guide us how to solve this?
Thanks and regards,
   Rajeev Vandakar, Bangalore.

Unfortunately, it looks like that font has many issues. Googling 'Univers Condensed Fonts .net' gets a number of interesting posts. E.g.;
Univers 67 Bold Condensed Font does not show in my Flash Fonts List
See if you can select the font in the properties window of the VS.NET IDE.
It would also be interesting to see if the following will work in a new test app:
Private Sub Form1_Load(ByVal sender As System.Object,
ByVal e As System.EventArgs) Handles MyBase.Load
     Label1.Font = New Font("Univers 57 Condensed Font – Univers 57 Condensed", 12, FontStyle.Regular)
End Sub
- Ludek

Save options while exporting to pdf

Similar Messages

Maybe you are looking for