Save project in new 2nd hard drive

Gotta have space, added a hard drive, partitioned, easy install,
now Save new project doesn't see this drive. I should know how to do this, but....
Thanks for the assist.

Hi Kerry:
You need to be sure it is formatted correctly:
http://www.cs.ubc.ca/~pcarbo/macnexstar.html
Sue

Similar Messages

Using iMovie to save project files to external hard drive?

I have a MacBook Pro with very limited space on the internal hard disk drive. I also have a few FireWire external hard drives.
A friend recently gave me his Hitachi DZ-HS300A mini-DVD camcorder so I could copy footage off of it, load it into my machine, edit it and upload it (several minutes) to YouTube. He can't do this because he lives in a remote area where there is no broadband yet.
I almost never use iMovie. I was wondering if there is a way to save the project file to an external FireWire drive so that there will be no large video files clogging up my laptop's internal hard drive. Can this be done? Is there an iMove preference I have to change?

You should generally leave the iMovie Project file on the boot drive. The Project File is mainly a small text file with in and out points.
The iMovie Event file is where the video assets are stored. You can store events to an external hard drive in two ways:
1) As you import from the camera, you will see an import screen. You can select the external drive on the import screen
2) If the event is already on your internal drive, you can click View/Events By Volume. Now you can drag and drop the event to the external drive in the Events SOurce List in iMovie.
For your external drive to be visible to iMovie, it must be formatted HFS+ or HFS+ (journalled).

I recently had my Seagate External Hard Drive go bad. I am trying to re-import my iMovie files from disk to save to the new external hard drive i was sent. no luck

I need to back up my iMovie DVDs. I recently had my Seagate External Hard Drive go bad. Seagate replaced the drive but not all the iMovie projects i had backed up there. Is there a way to do this from theDVDs i burned the iMovie projects to? The DVDs are now the only copy i have of all my home movies

even when the hard drive is compatable with my MacBook Air.
What is the file system on that drive? Is it formatted MacOS Extended (Journaled)?
And what is your iPhoto version? iPhoto 9.5.1?
Some how I have trouble trying to drag my photos to my drive and it is not letting me to do so
What exactly happens when you try to drag photos to your drive? Are you dragging from iPhoto's window to the drive?
Can you export your photos, when you select the photos on iPhoto and use the command "File > Export"?

I have been storing my Aperture and IMovie Libraries on an external hard drive that recently died. Fortunately I've been using Time Machine to back up to a 2nd external drive. How do I restore my libraries to a new external hard drive?

I have been storing my Aperture and IMovie Libraries on an external hard drive that recently died. Fortunately I've been using Time Machine to back up to a 2nd external drive. How do I restore my libraries to a new external hard drive?

This is a tricky one.
Open up Time Machine and go back to a date using the timeline on the right side of the window when you know the drive was working and was backing up as part of Time Machine backups.
Click on the name of your Mac under the Devices heading on the left side of the window in Time Machine, and if things are working correctly you will see Macintosh HD (or whatever you have named it) and the name of the external hard drive that was backing up in the past.
Right-Click on the name of the external hard drive and then click on "Restore (name of drive) to....." You may be asked for your adminstrator password at this point.
It might be easier to restore the drive contents to your desktop if you have room on your Mac, and then copy things over to the new external drive where you want to store the Aperture and iMovie Libraries.
Once the libraries have been moved over the new external hard drive, you will likely need to "point" Aperture and iMovie to the location of the libraries on the new external hard drive.

I just got a new mac and use my external hard drive to save all my images to but whenever I go to save my photo to my hard drive it says I do not have write access....Whats wrong how do i fix this or do i need a new hard drive??

I just got a new mac and use my external hard drive to save all my images to but whenever I go to save my photo to my hard drive it says I do not have write access....Whats wrong how do i fix this or do i need a new hard drive??@

This is a Mac question not a Photoshop question, and I am a Windows users, but I can Google and this might be what you need to do:
http://www.makeuseof.com/answers/change-read-permision-external-hard-drive-mac/

How do I get my Firefox bookmarks off of my old hard drive (now installed on my new computer as the 2nd hard drive) and into my new installation of Firefox on my new computer?

I had a lovely computer, about 8 years old, running Windows XP; the mother board died; the hard drive was fine.
I now have a new computer, running Windows 7, and I have the old hard drive as my 2nd hard drive.
How do I get my old Firefox bookmarks off the old hard drive and into my new Firefox installation?

You can find your current profile using about:support pasted into the location bar then click on "Open Containing folder. That is where you will want to replace your old files into.
Next find your old profile on your old HD, see
:https://support.mozilla.com/questions/886839
With Firefox down replace the profile files you decide to replace.
You might get a better idea of what you are doing or might want from also looking at
* http://kb.mozillazine.org/Profile_folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox

New computer - Can I open previous FCPX events/projects from an external hard drive on my new computer?

My old computer died - a Macbook Pro from 2011. Fortunately, I saved all of my FCPX events and projects on an external hard drive. Unfortunately, many of those projects were unfinished.
I have since bought a new iMac with FCPX, but I can't figure out how to open my old projects.
On my external hard drive, I have 2 folders: Final Cut Events and Final Cut Projects.
Under a specific event, there is an "Analysis Files" folder, a "CurrentVersion.fcpevent" file, an "Original Media" folder, and a "Render Files" folder.
Under a specific project, there is a "CurrentVersion.fcpproject", a "Render Files" folder, and a "Shared Items" folder.
Is it possible to open up my old FCPX projects? Thanks so much for your help!

It may have been an earlier version, but that doesn't seem to be working. See attached photo
Its not allowing me to click on my Events or Projects.
Any other ideas?

I use an external hard drive as a Time Machine back up, but I want to use another external hard drive to save movies, photos on it, but it won't give me the option to save anything on the new external hard drive. Nothing is wrong with the external hard.

I use an external hard drive as a Time Machine back up, but I want to use another external hard drive to save movies, photos on it, but it won't give me the option to save anything on the new external hard drive. Nothing is wrong with the external hard.

Hi Clarkett99,
To use an external hard drive for your iTunes library, see the steps in this article -
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/HT1751
iPhoto can be used in a similar way, follow the steps in this previous discussion -
how do I save photos and their albums...: Apple Support Communities
https://discussions.apple.com/thread/3744259
Thanks for using Apple Support Communities.
Best,
Brett L

How can I save a book in projects on a separate hard drive

How can I save a book in projects on a separate hard drive?

You can not save "just a book"
The book is just entried in the iPhoto database and the only way to move its location is ot move the entire iPhoto library
You can make a special library just for the book so you have a smaller library to archive - see Old Toad's tutorial #9
LN

HT1391 I had all of my music on an external hard drive that failed. I have iTunes Match so all of my music was synced with the "cloud". How do I now download and save all of my music back down on a new external hard drive?

I had all of my music on an external hard drive that crashed. I have iTunes Match so all of my music was synced in the cloud. How do I now re-load my music back down onto a new external hard drive?

Hey Rbe58!
I believe this question can be answered by the information in the following article:
iTunes 11 for Windows: Access all your music anytime, anywhere with iTunes Match
http://support.apple.com/kb/ph12492
Play or download songs from iCloud
You can play songs directly from iCloud, or you can download songs so you can play them when you’re not connected to the Internet.
If a song is available in iCloud, it has a Download button next to it.
To play the song, double-click it.
To download the song, click the Download button.
After you download a song to a computer, it remains in the computer’s iTunes library, even if you turn off iTunes Match.
To only display downloaded songs in your iTunes library, choose View > Hide Music in the Cloud. This also hides any previous iTunes Store purchases you haven’t downloaded.
For information about downloading and playing songs on an iOS device, see the documentation for the device.
Thanks for using the Apple Support Communities!
Cheers,
Braden

Can I add a 2nd Hard Drive to my new Pavilion dv6 notebook?

I would like to add a 2nd hard drive (preferably SSD) to my "HP Pavilion dv6-6188ca Entertainment Notebook PC"
I am hoping there is an option to at least replace the DVD drive with a hard drive caddy?
What are my options?
Thanks!

stevefromapo wrote:
I purchased a OWC DataDoubler kit with a 750GB hd and it works fine. I just need to get a USB CD Drive for mac so if i need to reinstall my OS I can do it.
You could put your install disc on a USB Flash drive with Disk Utility. Also, here is the USB optical drive enclosure I bought. He raised the price a few bucks. Mine ran $10.00 with the shipping.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

How can I save a project to an external hard-drive?

Hey guys,
I'm trying to clean out my computer and I want to move a finished project to an external hard-drive (while still being able to edit in the future if I choose)... How can I do this, and once I accomplish the task would I be able to delete everything that was on my internal hard-drive?

Use FCP's Media Manager to copy to the external drive. Once copied and you verify everything is OK, you can delete the original files.
-DH

Can I save my movie projects to an external hard drive?

I am an elementary music teacher and often make DVDs of my students' performances. This is maxxing out my hard drive on my Mac. I have an external hard drive with a lot of memory, so my question is: can I somehow put iMovie projects onto the external hard drive, to free up memory on the Mac's hard drive? If so, how do I go about doing this? Conversely, would this be a bad idea, and if that is the case, could I move iTunes (also have a ton of music, as you can imagine) or iDVD to the external hard drive? Or iPhotos?
I'm not high-tech savvy, so need help in simple English, please.
Thanks so much!!!

Within the project library of iMovie you should see your external drive listed along with the projects stored on your mac. To copy a project you simply drag the project from its current position to your external drive. You will then get the option of copying just the project or project and events. As Bengt rightly states you should copy both project and Events. If you hold down the alt key as you drag the project you will get the option of moving rather than copying. I would NOT recommend doing this in case there are problems during the copying/moving process (I don't find iMovie to be the most stable of apps) and you might find the original project has been deleted without properly copying it across. Better to copy to the external drive, check it works ok and then delete original.
Hope this helps.
Russ

New WD Hard Drive ATA Link Errors

Hi there,
I just bought a new hard drive for my lenovo ThinkPad R60e. It is the following model:
# hdparm -I
ATA device, with non-removable media
Model Number: WDC WD5000BUDT-63G8FY0
Firmware Revision: 01.01A01
Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6
Standards:
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 976773168
Logical Sector size: 512 bytes
Physical Sector size: 4096 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 476940 MBytes
device size with M = 1000*1000: 500107 MBytes (500 GB)
cache/buffer size = unknown
Nominal Media Rotation Rate: 5400
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 0
Advanced power management level: 128
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
* Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
Media Card Pass-Through
* General Purpose Logging feature set
* 64-bit World wide name
* URG for READ_STREAM[_DMA]_EXT
* URG for WRITE_STREAM[_DMA]_EXT
* IDLE_IMMEDIATE with UNLOAD
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
* Idle-Unload when NCQ is active
* NCQ priority information
DMA Setup Auto-Activate optimization
Device-initiated interface power management
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
unknown 206[12] (vendor specific)
unknown 206[13] (vendor specific)
unknown 206[14] (vendor specific)
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
138min for SECURITY ERASE UNIT. 138min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 50014ee60132e99d
NAA : 5
IEEE OUI : 0014ee
Unique ID : 60132e99d
Checksum: correct
As it uses Advanced Format, I did an aligned partitioning as you can see here:
# fdisk -u -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x04801fe0
Device Boot Start End Blocks Id System
/dev/sda1 2048 224909 111431 83 Linux
/dev/sda2 224912 44275139 22025114 83 Linux
/dev/sda3 44275144 48484169 2104513 83 Linux
/dev/sda4 48484176 976768064 464141944+ 83 Linux
After that I tried to copy my old system and data from the old hard drive (The new WD drive was built into the laptop and the old drive connected via SATA2USB adaptor). After a few minutes the hdd started to hang and the following messages occured in "dmesg"
[ 934.624568] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 934.624575] ata1.00: BMDMA stat 0x25
[ 934.624583] ata1.00: failed command: WRITE DMA EXT
[ 934.624596] ata1.00: cmd 35/00:80:68:2b:13/00:01:2d:00:00/e0 tag 0 dma 196608 out
[ 934.624599] res 61/04:10:f0:1c:13/04:00:2d:00:00/e0 Emask 0x1 (device error)
[ 934.624606] ata1.00: status: { DRDY DF ERR }
[ 934.624611] ata1.00: error: { ABRT }
[ 934.631465] ata1.00: failed to read native max address (err_mask=0x1)
[ 934.631472] ata1.00: HPA support seems broken, skipping HPA handling
[ 934.646871] ata1.00: configured for UDMA/133 (device error ignored)
[ 934.646890] ata1: EH complete
[ 1234.019934] ata1: link is slow to respond, please be patient (ready=0)
[ 1239.033266] ata1: device not ready (errno=-16), forcing hardreset
[ 1239.033279] ata1: soft resetting link
[ 1244.199930] ata1: link is slow to respond, please be patient (ready=0)
[ 1249.053269] ata1: SRST failed (errno=-16)
[ 1249.053282] ata1: soft resetting link
[ 1254.219921] ata1: link is slow to respond, please be patient (ready=0)
[ 1259.073267] ata1: SRST failed (errno=-16)
[ 1259.073279] ata1: soft resetting link
[ 1264.239938] ata1: link is slow to respond, please be patient (ready=0)
First I thought it looks like a problem with the SATA connector within my notebook, but it shouldn't be case as the hdd sits tight and the old one still works. Moreover I tried to change SATA settings in BIOS from "AHCI" to "Compatibility" in case of a driver fault, but this also didn't fix the issue.
For now I have connected the new hard drive with the SATA2USB adaptor and do some writing on it via dd. In this case, the errors do not occur at all.
The disk now gives me errors even if connected via USB. So I assume it is a hardware defect. The Western Digital Drive Check tools won't boot, but, I think these errors are more or less unambiguous
[ 268.018935] Buffer I/O error on device sdb, logical block 77649
[ 268.018938] lost page write due to I/O error on sdb
[ 268.226335] sd 2:0:0:0: [sdb] Unhandled sense code
[ 268.226340] sd 2:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
[ 268.226345] sd 2:0:0:0: [sdb] Sense Key : 0x3 [current]
[ 268.226350] sd 2:0:0:0: [sdb] ASC=0xc ASCQ=0x0
[ 268.226355] sd 2:0:0:0: [sdb] CDB: cdb[0]=0x2a: 2a 00 00 09 7b 30 00 00 f0 00
[ 268.226366] end_request: I/O error, dev sdb, sector 621360
[ 268.434722] sd 2:0:0:0: [sdb] Unhandled sense code
[ 268.434732] sd 2:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
[ 268.434740] sd 2:0:0:0: [sdb] Sense Key : 0x3 [current]
[ 268.434748] sd 2:0:0:0: [sdb] ASC=0xc ASCQ=0x0
[ 268.434756] sd 2:0:0:0: [sdb] CDB: cdb[0]=0x2a: 2a 00 00 09 7c 20 00 00 f0 00
[ 268.434775] end_request: I/O error, dev sdb, sector 621600
[ 268.642711] sd 2:0:0:0: [sdb] Unhandled sense code
[ 268.642718] sd 2:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
[ 268.642723] sd 2:0:0:0: [sdb] Sense Key : 0x3 [current]
[ 268.642728] sd 2:0:0:0: [sdb] ASC=0xc ASCQ=0x0
[ 268.642733] sd 2:0:0:0: [sdb] CDB: cdb[0]=0x2a: 2a 00 00 09 7d 10 00 00 f0 00
[ 268.642744] end_request: I/O error, dev sdb, sector 621840
[ 268.849950] sd 2:0:0:0: [sdb] Unhandled sense code
[ 268.849956] sd 2:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
[ 268.849961] sd 2:0:0:0: [sdb] Sense Key : 0x3 [current]
[ 268.849967] sd 2:0:0:0: [sdb] ASC=0xc ASCQ=0x0
[ 268.849971] sd 2:0:0:0: [sdb] CDB: cdb[0]=0x2a: 2a 00 00 09 7e 00 00 00 f0 00
[ 268.850004] end_request: I/O error, dev sdb, sector 622080
[ 269.057592] sd 2:0:0:0: [sdb] Unhandled sense code
[ 269.057598] sd 2:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
[ 269.057603] sd 2:0:0:0: [sdb] Sense Key : 0x3 [current]
[ 269.057608] sd 2:0:0:0: [sdb] ASC=0xc ASCQ=0x0
[ 269.057612] sd 2:0:0:0: [sdb] CDB: cdb[0]=0x2a: 2a 00 00 09 7e f0 00 00 f0 00
[ 269.057624] end_request: I/O error, dev sdb, sector 622320
[ 299.466711] usb 1-1: reset high speed USB device number 3 using ehci_hcd
[ 329.760049] usb 1-1: reset high speed USB device number 3 using ehci_hcd
[ 354.454537] usb 1-1: USB disconnect, device number 3
[ 354.458395] sd 2:0:0:0: [sdb] Unhandled error code
[ 354.458404] sd 2:0:0:0: [sdb] Result: hostbyte=0x01 driverbyte=0x00
[ 354.458412] sd 2:0:0:0: [sdb] CDB: cdb[0]=0x2a: 2a 00 00 09 7f e0 00 00 f0 00
[ 354.458431] end_request: I/O error, dev sdb, sector 622560
[ 354.458446] quiet_error: 170 callbacks suppressed
[ 354.458451] Buffer I/O error on device sdb, logical block 77820
For the sake of completeness, here are the SMART values:
smartctl 5.40 2010-02-03 r3060 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: WDC WD5000BUDT-63G8FY0
Firmware Version: 01.01A01
User Capacity: 500,107,862,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Jul 10 09:44:26 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (13560) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 158) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7031) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 189 185 021 Pre-fail Always - 1541
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 54
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 16
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 50
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 36
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 164
194 Temperature_Celsius 0x0022 111 105 000 Old_age Always - 36
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
It is regardless which kernel version I use (latest ARCH 2.6.39 or 2.6.23 from a grml live system), the error is persistent everywhere.
I will just send it back for warranty. In fact, it's another prove for today's harddisk "quality"
EDITED: 1. forgot some detail in dmesg; 2. Finally got it
Last edited by fixje (2011-07-10 11:35:06)

We call it case or drive hum. And it seems like a harmonic clash of two devices, or the 2nd hard drive causing the case itself (metal case).
There are shock absorbent washers on the side metal door.
Drive is attached and firmly installed and the latch on the back is securely in down and lock position.
And of course it still happens.
Me, I'd pull the old inefficient 250GB drive with 8MB cache, the Seagate 7200.9s that some shipped with were horrible performance and noise).
What I do with drive is run it through WD Lifeguard in Windows a couple times (Extended Test, full format instead of quick).
Some people sought out drive sled anti-vibration washers to fit to the sled (can't change the height though in order to fit properly).
Turn off "allow drives to spin down when not in use" if on.

Saving iMovie 4 projects on an external hard drive

I'm starting the ambitious project of copying our family videos from 8mm tapes to iMovie to eventually making DVDs. since I don't have much disk space on my iBook, my plan is to put the iMovie files on an external hard drive & work from there. Here are the system specs:
Camera: Sony DCR-TRV520 (Digital 8)
Computer: iBook 800 MHz PowerPC G3, 28GB hard drive, 5GB available
OS 10.3.9
iMovie 4
Hard Drive: LaCie Eternet Disk mini 300GB (150GB available) format: Mac OS Extended
Problem: Open a new iMovie project on the external hard drive. Start to import the footage. After one or 2 seconds, the image freezes and import aborts.
Solution: Open a new project on the computer. Footage imports fine.
Problem: Can only import 1/2 hour or so of video before I'm in trouble. Files WAY too big for my itty bitty iBook!
Solution: Make a new iMovie file on the external hard drive & copy the clips from the computer to the hard drive. (this takes TONS of time!)
Problem: Open movie file on the LaCie. Import the clips. Clips show up but won't play!
Question: Is there any better way to do this? Why won't the project work on the external hard drive?
I teach video production at a high school and have done this many times on newer iMacs (iLife 6). We can't save every project on the computers, so certain projects I'll copy to an external hard drive. I've never had a problem working on an iMovie project from the hard drive. I considered uploading my movies on the computers at school, however then I'm stuck with iMovie 6 files on the hard drive and iMovie 4 at home.
Any suggestions -- other than get a newer computer?

Importing new footage from a video camera and working with iMovie with footage already on the computer are two completely different things.
At school, do you actually IMPORT video from digital camcorders directly to the USB drive as you said you were doing at home?
Because while you can indeed work on iMovie projects off a USB drive if you are not actually importing video, the whole importing process from a Firewire camcorder is sort of a streaming video type transfer and Firewire is used because it has a mode for this type of transfer. USB, on the other hand, can not import video from a camcorder straight to a USB drive reliably because there is way too much CPU overhead associated with USB transfers and it therefore can not keep up with the "streaming" video coming out of the camcorder.
If you want to find out more details, do a search for "isochronous" with Firewire. Firewire uses type types of transfers. Asynchronous transfer which is like USB uses where you transfer data, wait for the CPU to respond, then transfer the next chunk of data. Video transfer uses and isochronous process where, to put it very simply, the camcorder starts spitting out chunks of footage with a checksum and the receiving end receives it, calculates a checksum and if the checksums match, stores the chunk of data. If they don't match, the data is discarded and it starts to receive the next chunk of data. There is no ability to resend failed data so you get dropped frames in your footage.
If you import via Firewire from Camcorder to Mac then directly to an external USB drive, the transfer from Mac to USB drive will be too slow as the CPU and drive have to start doing their "did you get it?", "Ya I got it, send another/No, send again please", "OK here it comes" routine while in the meantime the camcorder to Mac Firewire transfer is just pumping out data at a fixed rate. Once the USB connection falls behind the process aborts.
Patrick

Save project in new 2nd hard drive

Similar Messages

Maybe you are looking for