Save scene to file (VRML would be nice)

First of all, I know this question has been asked many times. However, I've search high and low only to find no real answers. So I'm wondering what the best way to save java 3d scenes are at present day. I'd like to save VRML, but if I can quickly serialize branchgroups or something then that might be better if it's quicker. Thanks in advance!

I've had lots of issues with X3D. It's too new and
has very little momentum behind it. I'm nottouching
X3D (professionally) until they get it (and the
surrounding technologies) working right.From a prefessional point of view - I don't blame
you!Note the time lag from my initial post.... I've been working with x3d since the last post, it hasn't taken me long to brand support as terrible!
When it matures, it should be good! The syntax is far nicer than vrml (personally I think vrml syntax is horrible!)

Similar Messages

In iTunes 10, I could type "Sinatra" in the search file, and would get a list of all tracks with "Sinatra" in any field.   In iTunes 11 I get these clever little windows, with nice arrows, but no lists to view.   What am I missing?

In iTunes 10, I could type "Sinatra" in the search file, and would get a list of all tracks with "Sinatra" in any field.   In iTunes 11 I get these clever little windows, with nice arrows, but no lists to view.   What am I missing?

Thanks for chipping in.   I discovered something after trying what you suggested.   I have quite a few collections of hits by year from Time Life and Billboard. I've eliminated duplicate tracks that appear in both collections (or other CDs for that matter), but cross-reference the CD where I deleted the track and placed in in the comments section of the CD track I retained.   If I "search" by song name, only the remaining track appears.   But if I want to hear for example Classic Rock 1964, only those tracks remaining would be there when I pull up that CD.   So, I type "Classic Rock 1964," in the search field. First the boxes on the right of the screen open up showing album icons. Showing four tracks by album with a button to view 10 more, then four songs with an option to vies 18 more.   I finally noticed that at the top of the boxes is a blue band that reads, :Show Classic Rock 1964 in Music. When I double click on this blue band, all 24 tracks from the original CD appear in the song list format even though I had deleted two of them because they appeard in a Beach Boys CD.   On those tracks, I had referenced Classic Rock 1964 in the comments field.    So, bottom line, Search will also look in the comments field if you click "filter by all" in the magnifying glass to the left of the search field.   And you can move all tracks that if finds into a song list by double clicking on the blue band.

When I try to save a new file from numbers, I'm given the error of it can't create a file. why would that be?

when I try to save a new file from numbers, I'm given the error of it can't create a file. why would that be?

Try using /Applications/Utilities/Disk Utility to repair file permissions.
Bob

HT4753 would number automatically save an .xlsx file I opened and modified but not saved? I've lost a file with many edits...

would number automatically save an .xlsx file I opened and modified but not saved? I've lost a file with many edits...

kearly - thanks a million for posting both the question & the reply! I just unchecked that little box by accident, & couldn't figure out for the life of me how to fix it. Thanks again!!

How can I save adobe reader file from gmail into my adobe reader app?? i would like to open one file in place where I'm not able to access internet and for that reason i would like to save it. is that even possible?

How can i save adobe reader file from my gmail into my adobe reader application. or is there any other way i can save it into my phone so I'm able to open in any situation not just from my gmail???

Long hold on the document in mail and it should give you the open in... option, select adobe reader and the file is now saved locally for viewing even while offline.

How can i reset my download setting, to its orignial form. ie: with the option to save and open files

How can i open files, instead of having them just save.
there was a option with save or open, and normally i open
but i clicked save and i have tried several ways to fix it, none of them work.
any and all help would be nice
== This happened ==
Every time Firefox opened
== just now

hello, gmail should be one of the predefined actions for the mailto-protocol.
does it shop up when you try the following?:
go to ''firefox > help > troubleshooting information'', click on ''profile folder/show folder'' and close all firefox windows afterwards. a windows explorer window should open up - in there rename/delete the file named '''mimetypes.rdf''' - it will be regenerated again the next time you launch the browser.

I use Apple TV's screen saver with a file in my photo library. If I install newest update - will that change anything with my using this favorite feature? I have just under 4000 photos in that file. What is the total # of photos it can utilize?

I use Apple TV's screen saver with a file in my photo library. I believe it is first generation or second Apple TV - not the newest one.
If I install newest update - will that change anything with my using this, my favorite feature? I have just under 4000 photos in that file.
And, what is the total # of photos it can utilize? If I keep adding photos - is there a limit to the # it will utilize?

Thank you Alan and know you are right. I really can do all I need with my netbook and ereader and do not need the ipad. I think I just wanted something new and felt I may enjoy using it a lttle more than the netook. But it would be a waste just to buy one when I donlt acutally need it And, donl't think it is worth the extra money for me the get the 4g wireless capability since I doubt I would really need it often.
I may treat myself to the Ipad for the color, touchpad and fun to use but it is very expensive considering how little it will do for me no more than the things I want it for. It woudl be and expensive luxuray, I can do without. I actually need t learn how to use more of the function avaiable first. Maybe I should take up playing games and learning to take digital pictures so I can at least load them. If I could learn to do that and take a decent picture, I could start selling back all the "stuff" I have purchased on ebay. haha - I do have a nice doll collection, I would like to sell. I just do not have room for anything else. That was the primary purpose for the Kindle Ereader I bought and enjoy so much,
But, I will hold onto the thought for a while and see how it goes and what other comments I get, If I think I cannot live without it, then I will have to rethink which one to buy, I coud get the 32 g if I did not have to pay for the 4g wireless. And, if I knew I could get help to teach me how to use and enjoy all the functions, I would give it more serious consideration. My granddaugther got one for Christmas and that was what got me interested in it. I love the size of the screen and it had good color and was fast. She even had an application where she could write her notes and it would convert into typed words. That was a neat feature, If you could print it?
But thanks again for your comments and I will check later to see I get any other feedback.
Sunny:)

PPRO CS5.5 - Would be nice if sorting of project material took place immediately

Hi there...
Perhaps I am doing something wrong or I have missed some hidden preference.
Anyway, what is really bugging me is that in my project I have LOTS of files and bins etc.
After importing a clip or creating a new bin and giving it a name PPRO does not sort the list according to names until I come up to the top of the project panel
and toggle-click the NAME pane.
After that sorting of recently added items is alphabetical. On the other hand, if I dont come up and do that little trick PPRO wont sort until I close and re-open the project....
Not so Pro
Anyway - THis is using Mac OS X Snow Leopard - Latest Version

2 instances I (or a poor assistant editor) has to rename that many or more clips:
- Anything long enough that's slated & w/ script notes from the shoot - you want your file names to be your scene & take. Alot of these types of projects are done on MC, which doesn't sort after naming and for a good reason. With some little details on how it handles it really optimizes how fast you can do the work.
- In AE, had to make about 200 versions of the same 5 graphic slates. I named the files so that I can easily go back to find it if I need to make any changes for specific versions; and it saved a bunch of steps in exporting because I named it specifically what the comp name was & exported file should be named.
So, doing around 1000 renames with AE autosorting after every rename (and having to scroll back to where I was each time), was not ideal. That's why it should be optional to whether it "automatically" does it or not .
I agree it would be nice if upon import, it automatically sorts everything into whatever you currently have set.. by name, by type, by label, etc. Makes sense.
- wb

Keywords, Include on Export, Save Metadata to File, and SmugMug???

My workflow and issue (LR 5.7 and SmugMug plugin 2.1.10):
1) I import RAW files as DNGs
2) I do various Lightroom stuff, plus add Keywords. Some of the keywords do not have "Include on Export" checked. Some of my keywords are part of hierarchies that have "Export Containing Keywords" checked. And some of keywords have synonyms.
3) Once I am all done with a file, I select "Save Metadata to File"
4) Then I publish to SmugMug using the SmugMug publish service.
5) The SmugMug website shows keywords which I did not intend to be included on export, it does not show the complete hierarchy for those keywords that should, and none of my synonyms show. I noticed this is the same way the keywords were saved to the DNG when I view the file in Bridge.
6) When I export the file to a file on my desktop and check the metadata with Bridge, the Keywords all export correctly.
All of this behavior makes sense, I guess, but I cannot figure out what to do about it. Should I not bother to "Save Metadata to File", this seems to be what is messing up the SmugMug publish service? Is the SmugMug publish service behaving correctly? I would have expected it to behave like an export which would write synonyms, exclude keywords that should be excluded, etc, which seems to work ok in point 6 above. Are the publish services more effort than they are worth? So I get SmugMug to work, what happens when I try Flickr? I hate to stop "Save(ing) Metadata to File(s)", since that seems like a nice hedge against db corruption and the next time I decide to try a whole different image database.
Any advice on this issue would be greatly appreciated.

Perhaps someone with direct experience with publishing to Smugmug will chime in. Short of that, some thoughts on your issues:
Should I not bother to "Save Metadata to File", this seems to be what is messing up the SmugMug publish service?
I very much doubt that it is messing up the publishing. What gets saved to the file from the catalog is independent of what gets exported. Saving metadata to the file is generally a good practice (in case you screw up your catalog backups). Many, perhaps most, users set the preference Catalog Settings > Automatically Write Changes Into XMP.
I would have expected it to behave like an export which would write synonyms, exclude keywords that should be excluded, etc, which seems to work ok in point 6 above.
Yes, that's a reasonable expectation.
You may have done this already, but double-check: Right-click the Smugmug publishing service in the left-hand column of the Library, select Edit Settings, and in the Metadata section verify that you have Include: All Metadata set.
Did you download the Smugmug plugin from Smugmug? You might try this Smugmug plugin instead -- the author designed the publishing architecture of LR and has an excellent reputation.
Are the publish services more effort than they are worth? So I get SmugMug to work, what happens when I try Flickr?
I think many users find the publishing services are generally worthwhile. I publish regularly to Flickr (using the built-in Flickr plugin, which isn't completely reliable) and the Zenfolio plugin from Friedl.

HT201361 Is it possible to save the screenshot files to a different folder than desktop. How can I change the folder?

Is it possible to save the screenshot files to a different folder than desktop (that is the default). How can I change the destination folder? Thank you, Sal

To change the screenshot capture location to a new place on your Mac, first think of a location that would serve you properly. We like to place ours in a "Screenshot" folder located inside of the User's "Pictures" folder. To change the location to this new location, open the Terminal and enter the following command:
defaults write com.apple.screencapture location /Users/[u]/Pictures/Screenshots/
Replace "[u]" with the name of the user on your system. Once you have entered this command, let's restart the screen capture utility by restarting the SystemUIServer by entering the following command:
killall SystemUIServer
You can optionally log out and back in instead of entering this second command, thus restarting the SystemUIServer. Once restarted, all screen captures taken from here on out will end up in your /Pictures/Screenshots/ folder in the User's home folder on your Mac.

Illustrator CC very slow to open and save large format files

I work in a print shop that prints biggish stuff. I will frequently have files that postscript to close to a GB or more. Working on simple vector art with a few images in CC is not too much of a problem, but I still notice CC is slower than CS 6. The big problem is when I get a few 200mb PDF's, or files with layers of transparent PSD files in them etc, big busy files, then AI CC really bogs down, or frequently crashes altogether. CS 6 is MUCH better. I don't have the font issues, AI CC works fine with simple files. Saving & opening these big files is such a problem, I just save them back to CS 6, but that causes problems too, I do not want to, nor should I have to have 2 versions open at the same time. I always try to optimize the files as best possible, but it is tough sometimes as they R supplied by the customer, and the time it takes. We save to a Windows Server 2008 R2 box over gigabit network, which I know is not best practice, but no choice with the sheer volume of files. Would B insane to try to keep track & copy them back & forth, and it was never a big issue with CS 6. I am the first victim in our office, but the other 3 Mac Pro's will B switching over to CC this week, and I know the operators will B crying.
Anyone else out there having the same large file problems?
THX
Mac Pro 2.4GHZ 12 core 32GB 1TB
Mac OS X 10.7.5

I'm not sure Adobe would like this, but it seems to be working for us on Mac OSX 10.9.3 and Illustrator CC 2014
Go to your user Library > Preferences folder and open com.adobe.mediabrowser.plist using TextEdit.
Select all the text and delete it.
Save the file
Get Info and lock the file.
I also removed the com.adobe.mediabrowser.plist.lockfile from the Preferences folder.
So far doing this really improves performance in Illustrator CC 2014. Opening and saving files happens at a reasonable rate; however there is a down side. Preferences no longer save. Changes made to pallettes, etc. have to be redone everytime Illustrator is opened.
Other posts mention having Verdana and Trebuchet installed. I didn't find this to help at all.

How can I extract certain pages from my document and save as another file?

How can I extract certain pages from my document and save as another file?

You would need Adobe Acrobat to do that, not Adobe Reader.

Report generation vi's-save report to file.vi

I am a new user of LabVIEW. I'm using the Report Generation Toolkit VI's to do some customized reports.
1. how can I stop the report from popping up on the front panel when I initialize the report to be done. I know you can use "minimized" but that takes a few seconds to minimize and I would like to NOT see the report I'm generating pop-up at all.
2. I want use this customized report and constantly be saving data when a reset button is pushed. That is save the time stamp, the change in data etc on a continuous basis in 1 folder. Right now when I use the "Save Report to File. Vi" it over writes the previous data saved and all that data is lost. I need to be constantly saving all the data generated to be able to look back at it.
Thanks.

Hi shaef,
Which version of LV and Report Generation Toolkit are you using?
Assuming you are using LV 8.5 and RGT 1.1.2, then the attached screenshot should offer some help. Basically, you need to wire in the existing file as your template in order to not just overwrite the old data. You also need to make use of the series of 'Append' VIs that are in the toolkit.
Let us know if this works for you,
David_B
Applications Engineer
National Instruments
Attachments:
2008-03-23_165242.png ‏5 KB

I want to update forms in the response file and save it. Sometimes it works, but often I need to save the response file in another name. Very inconsequent! How come?

I have a form that I am sending out and compiling in the response file. These forms I also want to be able to update after receiving them (when I have them in the response file).
But when I do the updates I need to re-save the response file with another name? The strange thing is that sometimes I can just update and save exactly the way I want it. But most of the time I get the message "This file may be read-only, or another user may have it open. Please save the document with a different name or in a different folder."
Can someone please help me to figure out how to solve this issue. I know that I am the only one that has the file open. I am encountering the same issue in both Acrobat Pro 9 and Acrobat Pro X. (File was created in Acrobat Pro 9)

Good day!
A simple Paste does not work for you?
It should place the clipboard content as a new Layer which you can then move around.
If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
Regards,
Pfaffenbichler

Is there a way to save an image file as a jpeg and add -web or -print to the file name?

I am trying to find a way to save my image file as a jpeg and add -web or -print to the existing file name. This way I can easily see which files are lower resolution for web posting or high resolution for printing.

Jason,
I helped somebody do a very similar thing about a week ago.
The trick is to use the Batch command's ability to construct a file name.
Tell the batch to append, e.g. "-x" without quotes, to the name of each saved file.
The batch runs an Action which does a save as JPEG, resize image, add logo, save as JPEG, then close document.
The output is "<document name>-x.jpg" and "<document name>-x-x.jpeg".
Then use Windows Explorer to rename "*-x-x.jpg" to "*-print.jpg".
Then rename "*-x.jpg" to "*-web.jpg".
See http://forums.adobe.com/thread/1038992?start=32
The name construction that I used there was just an "x" appended to the document name. Use whatever you like. Also juliew subsequently referred to the method as a "double-batch" run, although it is not. One run of the batch will output two JPEGs for each input document.
I hope the disagreements in that thread don't cause too much disruption.
If you want, the Batch command itself can be recorded in another Action which would store the parameters of the batch, then you could run that Action anytime without having to set up the details of the batch each time. It would always output to one specific folder, though.

Save scene to file (VRML would be nice)

Similar Messages

Maybe you are looking for