SAVE_TEXT problem in adding new text identifier to an existing text object

I have an existing text object "ZEANR" which stores 9 long text data with identifiers 1 to 9. I want to add a new long text to that text object with id 10. when I use SAVE_TEXT function (with same parameters as others except the ID is set to "0010"), it throws an exception saying : "0010" text identifier is not defined for Text object "ZEANR". How can we append more long texts to an existing object ? I Have tried to change the insert parameter of the SAVE_TEXT function but it didn't work with both cases. I am getting the exception at perform chech_key --> perform check_id of the SAVE_TEXT function.
if someone knows the answer I will be preciated. thanks in advance.

The text ID specified in the parameter ID or text header (field TDID) should exist in table TTXID. It must be defined there with the text module object.
Go to transaction SE75, select "Text Objects and IDs", Change. Find your text object (ZEANR) in the list and double click. Choose create. Add a new text id (0010) and description. Save.

Similar Messages

In ical I just added new calendars to a pre-existing calendar group, I can make events with these calendars, but not reminders, any suggestions?

in ical I just added new calendars to a pre-existing calendar group, I can make events with these calendars, but not reminders, any suggestions?

Hi,
Lion has changed the way reminders (todos as was) work. They now seem to need to be in a seperate calendar.
In iCal open the File menu and select New Reminder List... and select where to put it.
Best wishes
John M

Adding New Customer Address to an Existing one

Adding New Customer Address to an Existing one
Hi
We have a lot customers set up in Oracle and they only have a
ship to address and now we would like to add the bill to address
to these customers. Since there are a lot of customers I was
wondering is there is an open interface we can use to that.
Thank you
alpha

Hi Chandu,
1.In Infospoke -> General tab -> DataSouce(here infobject - 0BPARTNER).
2. Destination tab -> choose radio button(DB Table or Flat file).
3. Goto tab infoobjects -> select required fields you want to send from left to right.
4. Give the selection accordingly(here i think PATRNER). But it should be available in your datasouce(Infoobject-0BPARTNER), if you want to give selection on this. I didnt understad what you mean of <b>"hide"</b> in your previous reply. If this is not available in your infoobject(OBPARTNER), How CAN YOU GIVE SELECTION ON THIS attribute...?
5. Try to add this field in Infoobject(0BPARTNER) and populate.
6. Trnasformation tab.
Here you can see Source Structure, Target Structure and Addin implementation.
Source Structure - system will generate according to the field you selected in InfoObjects tab(You cant change it).
Target Structure - You can define your own structure if you want or you can modify the generated structure. By default system generates Target Structure same as Source structure(if you want to add any more fields you can add here, but you have to populate those fields with your own coding in BAdi), Which is Addin implementation.
Srini
Message was edited by: Srini

Problem in adding new tabs in master data screens for RE-FX in ECC 6.0

Dear members,
I am working on RE-FX in ECC 6.0. I need some advice on the foll matter:
When displaying master data for Rental Object (Rental Space) (Tcode REBDRO) there are three tabs that are visible. They are General Data, Measurement and Area Shares. I would like the tab "Supplementary Texts" to also appear as the fourth tab. I have gone to the node Screen Sequence under the Dialog node under Usage View under Master Data in RE-FX.
I have added this screen to the sequence and have saved it successfully. Now when i am trying to display the rental space (RS) it is still not showing the tab that I just added. When I am trying to remove one of the existing tabs, by going into the same screen sequence I am successful in doing that. I am also able to add some of the other tabs. However every time I am trying to add the tab "Supplementary texts", I am failing to display it in the master data.
Request you to please help me as I am not an expert in RE-FX.
Regards,
Suvarghya Dutta

Hi Survaghya,
We are facing problem in adding tab to transaction RESCSU. We have followed all the steps mentioned by you , like
1. Go to transaction BUPT .
2. Select Application Object - transactuion BUS0.
3.Selected Application object as RESU.
4. And then went to all the following transactions.
    RESCSU0002     SU: Field Groups
    RESCSU0003     SU: Views
    RESCSU0004     SU: Sections
    RESCSU0005     SU: Screens
    RESCSU0006     SU: Screen Sequences.
5. Created one z function group , having 2 FM for PBO and PAI.
6. Also one subscreen having the field mapped to CI_INCLUDE - CI_VISCSU.
But still we are not able to see the tab on the settlemet screen.
We tried changing the screen sequence of existing tabs, we could change that, but after performing all the steps mentioned above we could not add new tab.
Please suggest where are we committing a mistake.
Thanks & Regards,
Deepti

Any fix for random art and song order problems after adding new music?

If I sync my touch with itunes as a restore, all cover art, albums and playlists are correct. Once I add anything new or make a change and re-sync, random cover art is missing and random songs are in the wrong order. The only way to fix the problems is through a complete restore. Has anyone else had this problem or figured out a fix? I am using the latest itunes on a PC with XP.

A few issues, but sorry let me try to understand.
Adding new music, 'XXXX's iPod cannot be written or read'' can you let me know the number. most likely music format is not iPod Compatible like HE-AAC.
started skipping songs - these are normally due to corrupted ID3 tags, try converting them -File-> Advance -> IPOD version or use MP3 validator to fix all songs in the library. (My Apologies, only work for MP3 music that skipped)
As for item 2, you can try Hard Reset if you like to download MP3 validator.
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Good Luck!

Problem with adding new field to the mass change screen in FBL5N

Hi,
We have a problem with adding the field XREF3 to the mass change screen. We followed steps described in the SAP Note 640908, but the result is that when we try to mass change some documents in FBL5N and enter some values in the mass change screen, a message appears: "Please enter at least one new value" and nothing is changed.
If you have faced with such a problem, we would be grateful if you give us some tips.
Regards,
Miłosz Włodarczyk

The problem has been resolved: we didn't activate a code in SE80.

Adding new field to detail data screen of object link

Hi All,
I've a requirement of adding a new field to the detail screen of object link. But the field is a combination of 3 other standard fields.
Please let me know how could i realise this functionality?
Thanks in advance.

Hi Srini,
Thanks for your Reply
I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
But still that field is not visible in the dynamic selection screen.
Thanks
Ajay.D

Adding new airport extreme to an existing airport express network...

i currently have a home airport network comprising two airport express units; one attached to the cable modem in the bedroom and the other downstairs in my study (extending the existing network and feeding a shared USB printer and airtunes speakers). i've recently bought an airport extreme, to improve network performance. i also plan to add a NAS in the next week or so.
ideally i'd like to situate the new airport extreme in the study, as i don't want to have to keep the NAS in my bedroom!
my question is this, if i add the new airport extreme to the existing airport network, will i see the benefit of the 802.11n connection, or should the extreme be set up as the primary base station?

... will i see slower transfer speeds (than if it was connected to the extreme) to / from the NAS when accessing it wirelessly from elsewhere in the house?
No. The transfer speed will be limited by the slowest connection, which is almost certainly your wireless connection speed.
If you buy a switch, buy a gigabit switch. Not because a slower one will limit your transfer speed, but because the Extreme is Gigabit and any newer equipment is likely to be as well. The advantage would only be relevant to the wired LAN.
The Express's Ethernet is not Gigabit but there is no reason for it to be, since it cannot connect to anything other than a slower wireless connection anyway.

Having problems when adding new Curency value field + currency field.

I need to add a new Currency field (CURR, length 15, 2 decimal places) plus the Currency field itself to a view.
I'm really struggerling. I have looked at the existing SAP fields in the Component workbench and I have to admit I can not see how a field is linked/related to the currency itself. Is this link established purlely at the disctionary level?.
Has anyone added their own Z field value and Z currency field before. I can create both fields and display them, but what I can not work out is how I related them within the component workbench, or is this done from the dictionary?.
Any help would be greatly appreciated.
I should have been able to look at an existing SAP example and work out how it's done, but so far I can not see/determine how this is achieved, even though someone has mentioned that it's controlled via the GET_I_field method. Looking at this method I was expecting to see some mention of both the Currency value field and the Currency field. But as I don't see these confusion reigns.
Jason

That's correct, but am I right in thinking that you can't actually create the currency key field itself?.
I am aware that currency value fields can be created which reference a currency key field, but can see nothing that allows me to create a currency key field to be referenced.
I hope that makes sense.
Also, I have amended the structure, changing my value fields from Decimal 15,2 to Currency 15,2 and have created a new currency key field in the structure and referenced this from the Currency value field.
Witin the Component/view/context node I can see this new currency key field, but it appears as STRUCT.fieldlabel whereas my currency value field appears in the context node as EXT.fieldlabel, because it was created in the AET.
My problem is that when attempting to add the currency key field onto the screen I don't have it to select from within the list of structures/attributes. All the others attributes in the context node seem to be there, except the new currency key field/attribute.
The attribute has a SET_fieldlabel, GET_fieldlabel, GET_M_Fieldlabel and a GET_I_Fieldlabel, which I believe is all that should be required.
Does anyone know what my problem could be?.
Jason

Problem in adding new downloadable objects in DW CS3

i have a problem. i have download so many objects from this site and now i want to add these aep extention files and i dont know where i shud pate them in the installation folder to use these objects in my web site kindly do help me in this regard. i will wait for your kind replies thanks

i want to add these objects i am going to mention below.
Glass Globe
Additional animation presets for After Effects
Movie Countdown
fireglow text wipe
all of these objects are in the first page and having .AEP extention so now i think now you can tell me how can i use them in my page after adding them in my dream weaver and i want to know how i can add them in my dream weaver.

Nokia 5610: Problem in adding new contacts using P...

Dear friends
I'm having a strange problem in uploading contact number using PC-Suite. Phone is connected via Micro USB link with PC. Once connected, I select "PC Suite" mode in Phone.
1. I use Nokia Contact editor to add new contacts in phone. Once I give necessary details in the contact editor then I save it. First time it gets stored successfully. Once again when I select "Create New Contact" and try to save it , it fails!!
Then In phone, I have to select Menu-->Settings-->Connectivity-->USB Data Cable--->PC Suite. Then only it allows me to save the newly created contacts.
I have to repeat this cumbersome procedure every time I create a new contact.
In an all I'm able to save only on Contact at a time.
What could possibly wrong with that.
2. PC Suite shows only name of those contact, which were added thro' phone. It does not show contact number.
Xpress Music Rulez
Codingt the creativity

I have absolutely the same problem.
What's worse is that when I updated the phone software, I lost all of my contacts fromm the phone memory.
I hope there's any easy fix to this issue or I may have to chose another phone manufacturer in future as I find this untenable.
Great music player, shoddy software.
Grrr...

How do I resolve this SHARING PROBLEM when adding new members.

Whenever I try to change a sharers status or try to add new sharing members it prevents my existing co-authors from editing. They can log in and they are still shown as Co-Authors, but they can't edit. The only way to resolve this is to delete all members and start from scratch by adding them again, sending notification, and having them respond again. Am I going to have to do this every time?

Your hard drive has failed. All your data is almost certainly lost. You must replace your hard drive and re-install Windows.

Problem with adding new ICM profile to Color management (Print Section)

I have a problem when selecting other in profile to switch from Managed by Printer. The dialog that is supposed to appear, does not. I am using window XP sp2. Once I select "other" to add new selectable profile, the lightroom app locks up waiting for me to perform some selections of profile. But because no dialog appear, I am only left with escape to get out of the mode therefore reverting to "Managed by printer" option. This is unfortunately not an acceptable option for me.
Has anybody experienced such problems?
Thanks
Eric

Probably the same problem as where the export panel appears off screen. Apparently, you can hit alt+space+m and move the dialog back into your display. See here:
Kelley Hood, "LR2 Export dialogue box will not appear - HELP!" #10, 1 Sep 2008 12:40 pm
Try it. Might work.

Problem when adding new registration in SQL Server2000

I couldn't add new registration in SQL Server2000 using SQL Server Authentication mode even I've already entered correct server name, username sa and correct password.
I've tried to ping this server from command line and it's ok.
But if I run Windows Explorer (\\servername) and put Windows'username and password then add new registration again, it's successful.
Please explain me why? I want to add new registraion from some server which I only have SQL Server username and password but don't have Windows username and password. Is it possible?

Hi JensK.Suessmeyer,
After reading your answer, I've checked and found that the SQL Server has default instance(MSSQLSERVER) and server is running mixed mode authentication.
Following are all the complicated steps I must do to add new registration:
Ping SERVERNAME to check connection
Add new registration, using SA and SApassword
The previous step failed, then run windows explorer (\\SERVERNAME)
Put windows logon info: SERVERNAME\trunghd & mypassword
Add new registration again and it's successful
If I add registration from some server that I've already entered windows logon info once, it's successful too.
The question is why I have to give Windows logon information to the server when it's running in SQL authentication mode. I found no relation between my Windows username in this server with the installed SQL server in it.
Thank you very much for your answer.

Problem with adding new contacts to CRM from Outlook

Hello, we are trying to import contact data into CRM 2013 using the Outlook client. A lot of these contacts are coming through in forwarded emails and the client is not picking up the contact data correctly.
For example, when we click the 'track' button - if the contact is not in the CRM, the small CRM window at the bottom of the email shows up in red. Then we can right-click and 'add contact' or 'add lead'. But forwarded emails don't do this? Is there a solution
or are we doing it wrong?
(We have just started using CRM and would appreciate any helpful tips!)
Many thanks,
Jason

The problem has been resolved: we didn't activate a code in SE80.

SAVE_TEXT problem in adding new text identifier to an existing text object

Similar Messages

Maybe you are looking for