Save text to pc with password

Am i able to transfer text msgs from phone to computer and stop other people accessing them. I have windows xp and a nokia 6230i with pc software. i know how to save word docs etc with passwords, but not sure how nokia pc suite stores the info. how do i save the info with a password . i understood that the backup facility was the way to transfer the text n photos, but this didnt give me the option of saving securly with password. it has taken me ages to delete any trace so that i can start again. many have access to this pc so i dont want others viewing my text or photos .i want to be able to save all text and photos to pc and delete them from my phone.....please help...ps not that computer literate so please keep it simple thank you

I have exactly the same problem.
I did think about writing a viewer, just to read each sms file and extract the relevant data. But because my programming skills are so weak it would take me like a month to do it.
Anyone at Nokia with more skills than me got a spare hour to write a viewer?

Similar Messages

  • Scripting 'Save PSD as PDF with password security' and 'Open PDF with password security' issue.

    Hi!
    I'm now building an extension for Photoshop. The script (jsx) should save the active document as Photoshop PDF secured with a password. The PW is the same all the time and is set in the script. Then the script is to open the PDF with that same password. I need all this to protect the PDF from opening by a user, so that only the script has access to the file.
    I've googled a lot. I've seen a similar topic on this community dated as 2012. It's not answered. With an only comment saying that saving with a password seems to be possible via GUI and not via a script.
    Has anything changed since 2012?
    P.S. Illustrator .documentPassword and .requireDocumentPassword don't work in PS and ScriptListener still gives nothing :-/

    ScriptListener still gives nothing
    Which probably means the task is (still) not possible to achieve with Photoshop Scripting.
    Both Photoshop DOM and AM seem to have weaknesses/omissions that I would consider more relevant but if you regard the issue as crucial you may want to post a Feature Request over at
    Photoshop Family Customer Community

  • Save a PDF document with password via BSP

    Hello,
    I am using the code following code to show a PDF via BSP:
    response->set_header_field( name = 'content-type'
    value = 'application/pdf' ).
    some Browsers have caching probs when loading PDF
    response->set_header_field(
    name = 'cache-control'
    value = 'max-age=0' ).
    l_pdf_xstring contains PDF data
    l_pdf_len = XSTRLEN( l_pdf_xstring ).
    response->set_data( data = l_pdf_xstring
    length = l_pdf_len ).
    navigation->response_complete( ).
    Now I need that a password will be required before to show the PDF.
    At the same time, this PDF should be saved with a password.
    Thanks in advance for your help.

    Hi David,
    The reason for the numerous implementations of 3rd-party tools to encrypt PDF (that is to say, add a user password) is that Adobe publishes the documentation.
    If you want to implement it yourself in your BSP application, I would greatly advise having a look at this : http://partners.adobe.com/public/developer/en/pdf/PDFReference16.pdf
    In particular, section 3.5
    Hope it helps !
    Best regards,
    Guillaume
    Message was edited by: Guillaume Garcia

  • How do I save excel file with password for read only access ?

    Hi
    I am trying to save an excel file with a password to make it read only when opened
    using OLE2 . I am having a problem with the parameter list. This is my code that does
    work.
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, 'C:\Reports\Excel\File.xls');
    ole2.add_arg(args, 0);
    ole2.add_arg(args, 0);
    ole2.add_arg(args, 'TEST');
    ole2.add_arg(args, 0);
    ole2.add_arg(args, 0);
    ole2.add_arg(args, 1);
    I also have the following code at the beginning of the program to suppress dialogs.
         OLE2.SET_PROPERTY(application,'DisplayAlerts', 'FALSE');
         ole2.set_property(application,'Visible', 'false');

    Hope it help.
         -- Begin : Protect your worksheet
         args := OLE2.CREATE_ARGLIST;
         OLE2.ADD_ARG(args,yourpassword); -- choose your password
         OLE2.INVOKE(worksheet, 'Protect', args);
         OLE2.DESTROY_ARGLIST(args);
         -- End : Protect your worksheet
         -- Begin : Save and close worksheet
         OLE2.INVOKE(workbook, 'Save');
         OLE2.INVOKE(workbook, 'Close');
         -- END : Save and close worksheet

  • Updateble table with HTMLDB_ITEM.TEXTAREA  not save text area field?

    I use
    updateble table with HTMLDB_ITEM.TEXTAREA that does not save text area field?
    select a,b,
    case when cond1 then APEX_ITEM.TEXTAREA(3, A_COLUMN,4,50)
    recards
    Edited by: sak on Dec 21, 2009 4:24 PM

    Sak,
    Unless I'm misunderstanding your situation, you've wandered outside the abilities of the automatic DML process to update your table. As soon as you use APEX_ITEM objects in your SELECT, you need to write your own table insert/update/delete processes to handle the updated values. The Advanced Apex documentation gives some basic examples for this, but I struggled with it the first time (because I was using a checkbox, which is handled differently than the other types).
    For more assistance, try searching this forum for "APEX_ITEM".
    Good luck,
    Stew

  • Open report with "Save as" and "Open with" dialogue

    Hi,
    I'm using jasper reports within my application. I manage to open them in a new window but in that case the url containing JasperServer username and password is shown. I would like to open the report without showing the url.
    I tryed using a database procedure (http://sqlcur.blogspot.com/2009/02/jasperreports-in-apex.html) but all I get is a alert window saying "file does not begin with ' pdf-'". Couldn't see what is the problem (I used the same procedure as Ino has in his example) so I thought of another way. Is it possible, when someone clicks a button to open a report, to open that report with a "Save as" and "Open with" pop up window?
    The javascript function that I use:
    <script language="JavaScript" type="text/javascript">
    function openLAPopUpJasper(url){
    w = open(url,"winLov","toolbar=false,menubar=false,location=false,resizable=yes, //scrollbars=yes,status=yes,fullscreen=true");
    if (w.opener == null)
    w.opener = self;
    w.focus();
    </script>
    Thanks in advance!
    Edited by: Josip on Oct 29, 2009 2:55 AM

    Anyone?

  • Fingerprin​t Reader access to KeePass (from a Thinkpad with Password Manager)

    The goal: secure, convenient, automated login to password-protected sites
    KeyPass is a great open-source program for secure creation, storage and use of login passwords and other information. With a plugin called KeeForm, it allows very convenient automatic login to password-protected sites by clicking on a KeePass entry. To preclude unintended access to all of your secure information, it is wise to close Keepass after each use, or set Keepass to lock when minimized. But this is less convenient, because a long secure master password then has to be entered before each use of Keepass.
    Using a fingerprint reader to enter Keepass can be a big time saver while retaining security. Capacitive swipe fingerprint readers can be very secure, provided they operate through equally secure software. They are available as USB units, or integrated into some keyboards and notebook computers, for example some Lenovo ThinkPads.
    Unfortunately, set-up can be a challenge and there may be disadvantages even after the best workable interface between KeePass and a particular biometric system. This example uses the integrated fingerprint reader and software on a Lenovo ThinkPad X61.
    The problem: getting secure fingerprint software to use KeePass
    ThinkPads can use Lenovo fingerprint software alone for start-up into Windows, but they need additional layers of software (Client Security Solution - CSS, and Password Manager  - PM) to work with other programs including KeePass. PM uses CSS security functions.
    Cautions about Lenovo CSS:
    1. Some organisations advise against CSS because of problems including clashes with antivirus programs. See http://www.ncsu.edu/antivirus/lenovo/ and
    http://prowiki.isc.upenn.edu/wiki/ThinkVantage_Sof​tware_Under_Windows_Vista
    These bugs may have been fixed over time - but install at your own risk!
    2. CSS and PM introduce their own system overheads which may slow some operations.
    3. Once tried, CSS may not simply be inactivated while restoring basic fingerprint start-up into Windows. The X61 at least insists that CSS be reactivated for any fingerprint function. If you try a Windows system restore to a time before CSS was first activated, you may experience the ‘blue screen of death'. The security chip evidently regards your desire for a past configuration as a security breach. With luck you may ‘live again' if you can log into Windows in Safe Mode to undo the attempted system restore. After that, I reactivated CSS. I was not game to try uninstall after inactivation of CSS - but see the ncsu link above.
    Having decided to accept the ‘risks' of activating CSS and PM, you may want to try PM for all password management. For me it would not recognise some internet logins, could not complete auto-submission in others, and did not allow the manual adjustments that make KeePass so versatile. Unfortunately PM help is very limited. There is no current user manual (old manuals up to v1.4 available on the web do not match the properties of the current v3 of the software). KeePass (or the KeeForm plugin) also struggles with some sites, but it works much better overall. Help on KeeForm plugin syntax is limited, but otherwise KeePass help is great.
    So we really want the fingerprint reader (via PM) to work for KeePass master password entry.
    This is not so simple for five interacting reasons:
    (i)  It is tricky to register KeePass in PM;
    (ii) PM then gets confused by ‘hidden' entry of a master password during fingerprint login to KeePass, and repeatedly tries to save ****** as a changed master password;
    (iii) PM also tries to automatically register each entry opened for editing within KeePass;
    (iv) PM tries to automatically register other logins even if they are managed through KeePass.
    (v) Your KeePass records are now only as secure as your PM login (which is likely to be your Windows login).
    The solutions: or workarounds at least
    The best workarounds I could develop for these five issues were:
    (i) To register KeePass in PM, first ensure that PM is running (icon in the system tray). Then launch KeePass, click the login window box for unobscured password display (three blue dots turn black), enter the master password and click OK to start KeePass as usual.
    If PM does not offer to save an entry for KeePass by this stage, try ‘plan B'. Open a window to edit an entry in KeePass, then click Cancel. PM seems to recognise this more readily as a login window and may offer to create an entry. Accept the offer, and name the entry KeePass. Then open PM to edit the saved entry. You will have to edit several fields to achieve an effective PM entry for KeePass:
    The title field must be "Open database - database.kdb", to match the title of the KeePass login window.
    The file name field should show the full path to KeePass.exe (something like C:\Program Files\KeePass\PeePass.exe depending on your installation).
    The login and password data field is accessed by double clicking the entry. It will need to show only your KeePass master password (in the unobscured text view). In login and password data, delete each line of unwanted text until you get to the final password line (shown as *****), and edit this line to provide your master password.
    In the Advanced tab, select auto-fill and auto-submit and the desired security level [see (v) below]. Then select OK to get to the PM front window, and File - Save Changes, then Exit.
    Now when you close and re-launch KeePass, PM should automatically intervene (requesting a fingerprint to complete the KeePass login if you selected that security level. Select ‘No' when PM asks to change the password [see (ii) below].
    If you had no luck, try ‘plan C'. Close KeePass completely, then launch it again to open the login window. Then right-click the PM icon in the system tray, open the ‘Type and Transfer Tool', click the box for unobscured password display, type in the KeePass master password, drag the cross-hairs to the password field in the waiting KeePass login window, and release the password there. Click OK to start KeePass as usual, then click OK to close the PM transfer window. If there is still no KeePass entry in PM, check that KeePass has not been included in the PM excluded programs list. If this sequence does not work, reboot and check again. Failing all else, any entry that PM succeeds in making from any login page can be edited to an effective KeePass entry by editing fields as described above for ‘plan B'.
    PM (v3.00) can be coy to associate initially, but it will accept KeePass (v1.14) as a password-managed program, and thereafter it reliably succeeds to auto-submit the KeePass login after some help described in (ii) below.
    (ii) Having sent the correct master password to the KeePass login window, PM becomes confused by the ‘hidden' text now in the password field, and offers to change its record of your KeyPass master password to ******. You can manually select ‘No' in the PM changed-password dialogue box that appears every time you use PM / fingerprint for KeePass login. But Beware: if you ever accidentally select ‘Yes' (the default) your KeePass master password record in PM will be changed to ******. This can be edited to provide the correct password again, but it is more than a minor pain in the AR5E. Unless you know (or have a backup of) your KeePass master password you just lost access to your KeePass database!
    To avoid this big nuisance and risk, you can set up to restart KeePass for each use from a desktop shortcut (instead of minimising it to the system tray) and have the shortcut run a batch file with vbs scripts that send the ‘No' message to PM automatically.
    Here is an example batch file, with corresponding vbs scripts. You can make all these files using Notepad and save the files with the names indicated, into the KeePass program directory (C:\Program Files\KeePass in this example).
    KeePass.bat (This launches KeePass and tells PM v3 not to change the password. Caution: If Lenovo changed PM program design in future, the effect could change; the batch file might send {TAB}{ENTER} keystrokes to another open window on your computer):
    C:
    cd\
    cd "C:\Program Files\KeePass"
    start " " "C:\Program Files\KeePass\KeePass.exe" "C:\Program Files\KeePass\Database.kdb"
    start /w Sleep.vbs 1
    start /w AppActivate.vbs
    start /w SendKeys.vbs
    Sleep.vbs (provides a short delay to open the ThinkVantage dialogue window, otherwise the following scripts fail because they are sent too soon):
    Wscript.Sleep Wscript.Arguments(0) * 1000
    AppActivate.vbs (puts focus on the ThinkVantage  Password change dialogue window so that Tab and Enter commands are not sent elsewhere with undesired effects):
    CreateObject("WScript.Shell").AppActivate "ThinkVantage Password Manager"
    SendKeys.vbs (sends a ‘No' response to the PM request to change its KeePass entry):
    CreateObject("WScript.Shell").SendKeys "{TAB}{ENTER}"
    Please substitute ) where you see smileywink: in the vbs scripts above - I can't get this forum window to stop automatically translating the " ) sequence of text (without a space) as an emoticon.
    This batch file approach should work with additional startup switches for KeePass, for example the /backup.path: switch used by ‘another backup' plugin (or you can use the db_backup plugin that works from the KeePass.ini file). Quotes are needed around any entry with spaces. But some things that ‘should work' such as just writing "KeePass.exe" instead of the full path in line 4 of the batch file do not give the same outcome for me. This may be an effect on timing of the switch of focus between windows - so if you strike a problem it may be worth experimenting with the delay time set through the sleep script.
    If you set KeePass to lock when minimised, you will have to deal manually with the PM changed-password dialogue every time you re-access KeePass. So it is simpler to close rather than minimise KeePass after each use and restart it when needed, via the batch file.
    (iii) You have to tell PM ‘No' whenever it offers to save an entry that is edited in KeePass. This is less of a nuisance, because entries rarely need to be edited once set up in Keepass.  There is no way to turn off this requirement. If you select ‘Never' it will prevent use of PM and therefore fingerprint entry to start KeePass (not just the edit window).
    (iv) Turn off internet login within PM. This will leave all internet logins to KeePass. Unfortunately you can not set PM to only allow a single program login (KeePass), but you can set it to exclude specific programs, so do that for other programs that you access via KeePass.
    (v) Finally, set PM security within CSS so that a fingerprint (or a password if the fingerprint reader fails) is needed every time PM is launched (not just once per boot). Similarly, set KeePass security this way within PM. Otherwise (if you set the requirement to once per boot) your passwords are open to inspection while you are away from your booted computer.
    Caution: How secure is your Windows login password? Most likely this is also your PM login password, so it now allows access to your KeePass database! Make sure that it is a unique, secure and preferably memorable password.
    How close are we now to the desired combination of security and convenience?
    Click on the KeePass shortcut to the batch file given above, swipe the fingerprint, wait while CSS works, then click on the relevant Keepass entry to access any password-protected site or application in your Keypass list - great convenience.
    Security is very strong - both KeePass and PM are extremely secure unless you use a weak or insecure master password or select less secure settings.
    Starting (or opening a locked instance of) KeePass without the batch file given above requires a couple of extra carefully-placed clicks in the process to tell PM not to mess up its entry for KeePass, then to complete KeePass startup. This is less convenient, and a mistake could prevent future database access - so the batch file method is recommended.
    A final caution (while enjoying secure & convenient logins):
    Beware - fingerprint access is so convenient that you may forget your master passwords! Eventually they will be needed! You may click the wrong button in PM, suffer a faulty fingerprint reader or change computers! Then you must recall your master passwords before you can access your password file (and possibly your computer). This could be devastating: loss of all secure password information in KeePass and PM (and possibly loss of all information on a protected computer drive, not to mention need to pay for a computer motherboard and HDD replacement). So:
    1. Choose very secure but ‘unforgettable' master passwords for KeePass and computer (PM) access.
    2. Always set up a secure master password as an alternative to biometric authentication (in case of a faulty fingerprint reader).
    3. Keep your password database backups, and your separate master password backups, in another secure (preferably encrypted) but accessible location!
    Program versions tested:
    KeePass v1.14 (v2 betas not tested) with KeeForm v2 and DB_Backup v1.14
    Lenovo CSS v8.20 with PM v3.00
    The solutions were tested in November 2008 on a Thinkpad X61 running Windows Vista Business. The tricks to interface with KeePass can vary between fingerprint programs (search the KeePass forum).
    Message Edited by r_g_b on 11-03-2008 07:01 PM
    Message Edited by r_g_b on 11-04-2008 12:00 AM

    I'm reviving quite an old topic here, but I have been unable to find any other good information on this.  I currently use the latest version of Keepass v2.23 and have Lenovo Passoword Manager v4.3 installed on my new W530 laptop.  I can't get PM to recognize any passowords at all, in web browsers or in windows application.  
    In PM the only thing I can do is create folders and secure notes.  My fingerprint software works great for automated logins to windows.  Does anyone have any experience with using the fingerprint reader with a windows application like Keepass?  
    How can I get the Password manager to do ... anything?  Recognize a password in windows or a web browser?
    I'm open to any other software to be used or I can write scripts if necessary to accomplish this.  It doesn't seem like this should be so difficult, but from what I've learned about Lenovo so far, is that nothing is easy.  After trying to get battery charge thresholds working proplery in Windows 8, I've already lost faith in a company that I thought had a great reputation.  

  • Operations on Text File - Encrypt, Decrypt, Password Protected

    Dear Experts,
    My requirement is to upload a text file  and do some operations on it and then encrypt the content in it ans save it on application server with password protected. Later i want to decrypt it.
    Please help me for the following:
    How to encyypt and decrypt the text file using standard encryption alogrithms like DES, MD5, RSA? Are there any standand function modules for both encryption and decryption which accepts a user defined public key?
    How to download a password protected text file?
    Thanks in advance.

    CALL FUNCTION 'Z_CRYPT_FILE'
            EXPORTING
              SOURCE_PATH         = WS_PATH
              SOURCE_FILE         = WS_OLDFILE
              DESTINATION_PATH    = WS_NEW_PATH
              DESTINATION_FILE    = WS_NEWFILE
              SWITCH              = 'E'
              KEY                 = ZUSER_PW
              KEEP_SOURCE_FILE    = ' '
            EXCEPTIONS
              INVALID_SWITCH      = 1
              SOURCE_FILE_NOTFOUND = 2
              DIDNT_WORK          = 3.
    FUNCTION MODULE Z_CRYPT_FILE 
    DATA: CINPUT(300) TYPE C.
    DATA: BEGIN OF LIST OCCURS 0,
            DATA(238) TYPE C,
            DELIMITER(04) TYPE C,
            FILE(12) TYPE C,
          END OF LIST.
    DATA: SOURCE TYPE ZCHAR200.
    DATA: DESTINATION TYPE ZCHAR200.
    DATA: ZINDX TYPE I.
    DATA: msg(100).
    IF SWITCH = 'E'.
       IF FILETYPE = 'T'.
          OPEN DATASET SOURCE IN TEXT MODE FOR INPUT ENCODING DEFAULT
             message msg.
       ELSE.
          OPEN DATASET SOURCE IN BINARY MODE FOR INPUT message msg.
       ENDIF.
       IF SY-SUBRC <> 0.
          RAISE SOURCE_FILE_NOTFOUND.
       ENDIF.
       CLOSE DATASET SOURCE.
       CLEAR CINPUT.
       CONCATENATE '/usr/local/bin/gpg -sev -r'
        KEY
        '-o'
        DESTINATION
        SOURCE
       INTO CINPUT SEPARATED BY SPACE.
       CONCATENATE CINPUT '2>&1' INTO CINPUT SEPARATED BY ' '.
       CALL 'SYSTEM' ID 'COMMAND' FIELD CINPUT ID 'TAB' FIELD
                                  LIST-SYS.
       IF FILETYPE = 'T'.  
          OPEN DATASET DESTINATION IN TEXT MODE FOR INPUT ENCODING DEFAULT
             message msg.
       ELSE.
          OPEN DATASET DESTINATION IN BINARY MODE FOR INPUT message msg.
       ENDIF.
       IF SY-SUBRC = 0.
          CLOSE DATASET DESTINATION.
          IF keep_source_file <> 'X'.
             CLEAR CINPUT.
             CONCATENATE 'rm' SOURCE INTO CINPUT
             SEPARATED BY SPACE.
             CALL 'SYSTEM' ID 'COMMAND' FIELD CINPUT ID 'TAB' FIELD
                            LIST-SYS.
          ENDIF.
       ELSE.
        write: 'Encryption error  on command: ',
           cinput.
        skip 1.
         loop at list.
            write: / LIST.
           endloop.
          RAISE DIDNT_WORK.
       ENDIF.
       IF FILETYPE = 'T'.  
          OPEN DATASET SOURCE IN TEXT MODE FOR INPUT ENCODING DEFAULT.
       ELSE.
          OPEN DATASET SOURCE IN BINARY MODE FOR INPUT.
       ENDIF.
       IF SY-SUBRC <> 0.
          RAISE SOURCE_FILE_NOTFOUND.
       ENDIF.
       CLOSE DATASET SOURCE.
       CLEAR CINPUT.
       CONCATENATE '/usr/local/bin/gpg -o'
        DESTINATION
        SOURCE
       INTO CINPUT SEPARATED BY SPACE.
       CONCATENATE CINPUT '2>&1' INTO CINPUT SEPARATED BY ' '.
       CALL 'SYSTEM' ID 'COMMAND' FIELD CINPUT ID 'TAB' FIELD
                                  LIST-SYS.
      REFRESH LIST.
      CLEAR LIST.
       IF FILETYPE = 'T'. 
          OPEN DATASET DESTINATION IN TEXT MODE FOR INPUT ENCODING DEFAULT.
       ELSE.
          OPEN DATASET DESTINATION IN BINARY MODE FOR INPUT.
       ENDIF.
       IF SY-SUBRC = 0.
          CLOSE DATASET DESTINATION.
       ELSE.
    *list output if error
          loop at list.
            write: / LIST.
           endloop.
          RAISE DIDNT_WORK.
       ENDIF.
    ENDIF.

  • Download File thru Text file and add password to protect text file

    Hello ABAPers,
    I have a problem regarding downloading of file in text file with password...meaning I need to protect with password the text file i created without human intervention...is it possible to ABAP? im using FM GUI_DOwnload and save it to text file.
    Please Help...Will reward points ...
    Thanks in advance.
    aVaDuDz

    Hi
    You could use OLE to integrate SAP with Excel - create files, execute macros etc. (search for DOI on SAP help), but this will only work on the presentation server, so you couldn't run it as a service in background. I suppose your e-mails are sent through the internet, hence the requirement for encryption -- or maybe your client doesn't trust its network people! For this you really should use strong encryption -- anything less, you might as well send plain text. One solution to this would be to send the email down a VPDN -- this would encrypt all traffic between source and destination. Another would be to encrypt the file just before it is attached to the email. This could be done within ABAP, but perhaps a third party public key encryptor would be better placed. This could be invoked via a system command call, or as an RFC. A third solution would be to have your mail server handle the encryption.
    Heres the link for the above explaination
    http://searchsap.techtarget.com/ateQuestionNResponse/0,289625,sid21_gci1037837,00.html?track=sap805s
    One more link
    <a href=" http://www.telfordpct.nhs.uk/healthcare_professionals/SAP/creating_sap_documents_in_word_copy(1).htm ">http://www.telfordpct.nhs.uk/healthcare_professionals/SAP/creating_sap_documents_in_word_copy(1).htm</a>
    Regards
    Raj
    Message was edited by:
            Rajasekhar Dinavahi

  • I've been texting my friend with iMessage with wifi on and all of a sudden it changed to text message and won't let me send messages. My wifi is still on and working but it won't switch back to iMessage. Please help

    I've been texting my friend with iMessage with wifi on and all of a sudden it changed to text message and won't let me send messages. My wifi is still on and working but it won't switch back to iMessage. Please help

    What I recommend you try doing first is to turn iMessage off then back on.  If that doesn't work, make sure that your Apple ID and password are correct.  If everything seems correct and you still can't send out messages using iMessage instead of text message, I think you should either try calling AppleCare at 1-800-MY-IPHONE (1-800-694-7466) and/or scheduling an appointment at the Genius Bar at an Apple Store (that is, if there's one close to you).
    Hope this helps!

  • How can I save text messages to my Mac and will that reduce "Other" in storage?

    I have hundreds (or more) of text messages on my iPhone 5 that for personal reasons, I want to save. There are far too many to do screenshots. I want to save them to my MacBook Pro Retina in a readable and printable format. The reason is that I read that text messages can cause the "Other" storage to be higher. My "Other" is over 6 GB on a 16 GB iphone. Therefore I want to save texts, print them, and delete from phone.
    First question: Is it true that text messages contribute to the size of "Other"?
    Second question: How can I save texts to Mac in readable format so they could be printed? 
    Third question: How in the world do I delete all these texts from my iPhone efficiently? Is there a way to "mass delete"?
    When you are answering this, perhaps it is noteworthy that:
    (a) I've had an iPhone since a 3G in 2009, and the texts I want to save have been accumulating since then.
    (b) My "Other" has gradually gotten larger over the years. 
    (c)  I sync with itunes regularly.
    (d) I've never had any problems with an iphone or with my data.
    (e) I've restored from backup only three times, when I upgraded to the iphone 4, 4S, and 5.
    I want to get this "Other" cleared up before I upgrade to the iphone 5S. 
    Thank you.

    You can select to export a folder to save as a .mbox file. This file would need to be imported if you wanted to view the messages.
    Select mailbox (folder)
    Under Mailbox in the Menu bar select Export Mailbox...
    You might also want to check out the demo for EagleFiler by the author for SpamSieve. You could view and search the messages archived in EagleFiler.
    http://c-command.com/eaglefiler/
    Regarding Mail being slow....
    Is it only Mail that is slow?  How much free space on your drive? Use Disk Utility to find available space.

  • Save text in a PO during creation

    Hi All,
    I need to save text in PO during PO creation. I am using the BADI ME_PROCESS_PO_CUST method:PROCESS_ITEM. My EBELN is blank here. I do have other required fields like text id, text name to use in SAVE_TEXT.
    Text needs to be saved before the PO is saved.. User can edit the text. So BADI during PO save is not an option.
    How do i save the text in my PO header during creation and during the line item is entered?
    Do have any other procedure to add the text in the text editor?
    This is my code:
    Please suggest, if we have any alternate procedure to show the text in PO.
    METHOD if_ex_me_process_po_cust~process_item.
       DATA :  ls_mepoitem TYPE mepoitem,
                ls_mepoaccount TYPE purchase_order_accountings,
                ls_mepoacc TYPE purchase_order_accounting,
                ls_mepoaccountdata TYPE mepoaccounting,
                ls_mepoheader TYPE REF TO if_purchase_order_mm,
                ls_mepoheaderdata TYPE mepoheader.
        DATA: gt_lines TYPE STANDARD TABLE OF tline,
              gwa_line TYPE tline,
              g_tdname TYPE thead-tdname,
              g_poname TYPE thead-tdname.
        DATA: header TYPE STANDARD TABLE OF thead,
              wa_header TYPE thead.
        DATA: lines TYPE STANDARD TABLE OF tline.
        CONSTANTS : gc_z056(4) TYPE c VALUE 'Z056',
                    gc_f06(4) TYPE c VALUE 'F06',
                    gc_ekko(4) TYPE c VALUE 'EKKO'.
        ls_mepoheader = im_item->get_header( ).
        ls_mepoheaderdata = ls_mepoheader->get_data( ).
        ls_mepoitem = im_item->get_data( ).  "Table
        ls_mepoaccount =  im_item->get_accountings( ).   "Table
        LOOP AT ls_mepoaccount INTO ls_mepoacc.
          CLEAR ls_mepoaccountdata.
    * Get the newly updated PO item data
          CALL METHOD ls_mepoacc-accounting->get_data
            RECEIVING
              re_data = ls_mepoaccountdata.
        ENDLOOP.
        IF ls_mepoheaderdata-bstyp = 'F' AND ls_mepoitem-knttp = 'M'
        AND ls_mepoitem-matnr <> ' ' AND
        ( ( ls_mepoheaderdata-bsart = 'UB' OR ls_mepoheaderdata-bsart = 'NB' ) AND ls_mepoheaderdata-lifnr <> ' ' ).
          REFRESH gt_lines.
          g_tdname = ls_mepoaccountdata-vbeln.
          CALL FUNCTION 'READ_TEXT'
            EXPORTING
              id                      = gc_z056
              language                = sy-langu
              name                    = g_tdname
              object                  = 'VBBK'
            TABLES
              lines                   = gt_lines
            EXCEPTIONS
              id                      = 1
              language                = 2
              name                    = 3
              not_found               = 4
              object                  = 5
              reference_check         = 6
              wrong_access_to_archive = 7
              OTHERS                  = 8.
          IF sy-subrc IS INITIAL.
            DELETE gt_lines WHERE tdline = space.
          ENDIF.
    *      g_poname = ls_mepoitem-ebeln.   *"ls_mepoitem-ebeln is blank here*
          wa_header-tdobject = gc_ekko.
          wa_header-tdname   = g_poname.
          wa_header-tdid     = gc_f06.
          APPEND wa_header TO header.
          CALL FUNCTION 'SAVE_TEXT'
            EXPORTING
              client                = sy-mandt
              header                = header
              insert                = 'X'
              savemode_direct       = 'X'
            TABLES
              lines                 = gt_lines
           EXCEPTIONS
             id                    = 1
             language              = 2
             name                  = 3
             object                = 4
             OTHERS                = 5
          IF sy-subrc <> 0.
    ** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    **         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    *      ENDIF.
        ENDIF.
      ENDIF.
    Thanks,
    Senthil.
    Edited by: senthil kumar on Jun 11, 2009 3:02 PM

    I haven't used this method myself, but when I look at method PROCESS_ITEM, the import parameter IM_ITEM  is of type (REF TO) IF_PURCHASE_ORDER_ITEM_MM. This has interface method IF_LONGTEXTS_MM~SET_TEXT (description: set long text per text id). This sounds like a good method to use.

  • Cant I save a web page with its pictures in safari?

    hi there,
    when i used save as... to save a web page, it can only save the page as text only, is there any way to save text and the pictures as well.
    im using safari 1.3.1 in os 10.3.9

    You can only save a page with images in Safari 2.x which comes with OS X 10.3.x. For earlier versions you can go to Print > Save as PDF to capture and image of the page. You can use Firefox or Camino to save a page in standard html format along with a folder of images. This method allows you to view the page with any browser whereas Safari's webarchives can only be viewed in Safari.

  • For some reason Firefox is not asking if I wish to save the user name and password anymore. Please help as to why.

    For some reason Firefox is not asking if I wish to save the user name and password anymore. Please help as to why.

    Your plugins list shows outdated plugin(s) with known security and stability risks.
    *Shockwave Flash 10.0 r32
    Update the [[Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    * Make sure that you not run Firefox in [[Private Browsing]] mode
    * In Private Browsing mode some menu items are disabled (grayed) and features like visited links are disabled and not showing
    * You are in Private Browsing mode if you see "Tools > Stop Private Browsing", possibly grayed
    * You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    * To see all History settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Uncheck: [ ] "Automatically start Firefox in a private browsing session"

  • Saving Numbers spreadsheet with password.

    How do I save a Numbers spreadsheet with a password to encrypt it? With Microsoft excel, it is quite easy and part of the "Save as" box, but I can't see how to do this in Numbers, and nothing in the help function either.

    Hello
    Welcome to the club.
    The response was given many times in the forum.
    So, use the search tool in the Numbers forum with the keywords "disk image" or "encrypted"
    Yvan KOENIG (from FRANCE lundi 14 janvier 2008 16:19:44)

Maybe you are looking for