Save through BPS web button

Hi Guys,
When I click the save button at the BPS web applications, it will take two minute to save my data while it only take 10 second to save in BPS0. Anybody know how to improve this in Web application?
Thanks

Hallo,
try to figure out first, where is the performance problem.
You can activate the statistic with the transactions:
/nBPS_STAT0 (for Data reading and functions) and /nbps_trace (for APIs). Then run your Web. Analyse the trace data, at which is the most critical.
Best Regards,
Suan Liono

Similar Messages

Master Data Save Through BPS - BI and BPS Related

Hi,
I have 2 questions regarding BI and BPS working together.
1.Does all infoobject used in BPS layout have to be master data enabled to avoid BPS created master data? By this I mean, if an infoobject doesn't have 'with master data' check box enabled, and has only'with text' enabled, the new masters created in BPS gets saved to the infoobject? Is this how it is expected to behave?Is there a work around to avoid creating master data from BPS?
2.We have a multiprovider for actuals and budget. Budget comes from BPS which has only cal quarter. But the budget and actuals cube have year and quarter. In the actuals we are deriving quarter and year from trnasaction date in update rule. But for budget, we have only quarter being entered by user. Is there a way to derive the year and store in budget infocube so that reports derived out of the multiprovider can show year correctly for both budget and actuals?
Thanks
Suja

>1. BPS cannot create master data at all and that setting is irrelevant fo bps. Users can only forecast on existing master data.
This is wrong. If your infoobject doesnt have master data, then values inputted in layouts will be written into the infoobject.
>1.Does all infoobject used in BPS layout have to be master data enabled to avoid BPS created master data?
By this I mean, if an infoobject doesn't have 'with master data' check box enabled, and has only'with text' enabled, the new masters created in BPS gets saved to the infoobject?
yes
>Is this how it is expected to behave?
I think, yes
>Is there a work around to avoid creating master data from BPS?
The only way, i suppose, to create infoobject with master data

"Save For Web" buttons change, favorite locations

Adobe,
Why did you move the Save, Cancel and Done buttons to the bottom of the Save For Web dialog box? In CS3 (which I just upgraded from) they were right above the file format/quality selectors, which was perfect for choosing a format and quickly clicking Save. Obviously the location of the buttons isn't urgent, I'm just wondering why you moved them to the bottom when probably all of the other dialog boxes have the buttons at the top (such as filters).
Also, why is the "favorite locations" feature only available when loading a file? Why isn't it there when saving?

Ask a marketing person about the concept of "New and Improved!" some time.
-Noel

BPS Web Application - How to change function button property dynamically

We have created BPS web application for sales force, it contains 2 button.
1. To send Workflow notification to Managers 'Request for Approval' - This would be used by sales person
2. Button for Manager to approve the Plan 'Manager Approval' - This would be used by the Manager
We are using Territory Management in CRM to determine who is the manager and sales person.
We would like to use the same Web application to be used by both sales person as well as the manager. However depending on the user ID, we need to access the Territory Management table in BW to determine whether the person logging in is Manager / Sales person. If it is a Sales Person, we need to display 'Request for Approval' button and hide 'Manager Approval' button. Similarly, if it is Manager, 'Manager Approval' button to be displayed and 'Request for Approval' button to be hidden.
Would appreciate, if any one has faced similar requirement and how to do this.
Thanks,
VJ Sudharsan

Thanks Ananad and Srini for the suggestion. Actually I was working on the direction Anand Suggestion and make it working but I am not sure what I did is correct or not.
I have a bogus variable that checks for Manager / Sales person and brings back following code in the variable, if it is manager:
'<style> #Req_Approval_s </style>'
and I added a new text component of type HTML and code
<%=descr(VarvlSel2/value)%>
it works. Is this the correct way of doing the enhancement. Or is there a different place where we can add JavaScript.
Srini - I am using exit function, can you explain how we can I use BPS authorization to achieve this.

Flat file upload through BPS webinterface

Hi ,
I want to load a flat file ( format in CSV) through web upload into a master data infoobject.
that is i want to upload through BPS webinterface . (3.5 version)
Is it possible to write everything in a BSP application without the help of Planning level or layout or functions.
but only through webinterface and a BSP application and can abap coding be included in directly in .htm page.
kindly help me out.

Hi,
I don't think so you 'll be able to write the abap code directly in htm page.Web interfaces are used for the purpose of creating and using user interface .It is no where linked to the logic or the activity that has to be performed using abap code directly.
You have to use the planning level and planning function for uploading the data through flat file.You can check the How to guide in forum's.
You can also create Transaction code for uploading the master data,through abap code you can provide buttons to upload it.
Regards,
Indu

Slice saved for web buttons not working on web display

Hello,
I am essentially a novice photoshop user, going through the Classroom in a Book for CS6 (which has been surprisingly disappointing). I have come to the chapter where you are directed to make slices and turn them into navigation buttons with html. Then, you save for the web and optimize, save as HTML and images, and when I open the page up (both in chrome and firefox), none of the buttons work, the links all say "image does not exist." I think I'm missing a crucial step somewhere linking the pictures to the html (or something) I gave them, but I can't figure out what it is, and of course in the bare-bones text provided by Adobe itself, there is no mention of it or troubleshooting for if it doesn't work.
will give it another go and try with my own images (instead of ones downloaded from the accompanying cd), see if that makes a difference. But appreciate any help! thanks

Hello RunN2Poles.
Please, check this document.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01798629&cc=us&dlc=en&lc=en&product=3737195&tmp...
Cheers!!
Wixma.
I am an HP employee.
Say thanks by clicking the Kudos star in the post.
If my reply resolved your problem, please mark it as as Accepted Solution so that it can be found easier by other people.

How to change web button and bars colors??

is there anyway to change illustrators default web buttons and bars after they are dragged to the canvas. it seems a lot of the buttons are yellow or blue. i wanted to specifically change the color of a "talk bubble." thanks

You haven't specified which version of Illustrator you are using, but I will assume for purposes of this discussion, that my version, CS3, is not vastly different from yours. The "Web Buttons and Bars" is a collection of symbols, which gives you several options. When you drag a symbol to the artboard three buttons appear in the Control Panel: Edit Symbol, Break Link, and Duplicate. Each affords you certain option for editing the symbol.
Edit Symbol puts the symbol into Isolation Mode, which allows access to the parts of the symbol through the Layers Panel and the Appearance Panel, and may be changed using any colors, effects, transformations, additions, deletions, or anything else you choose to do to it. When you are finished editing, and exit Isolation Mode, the changes you have made will appear in the symbol in the Symbols Panel and in any instances of the symbol you have put on the artboard.
Break Link turns the symbol instance you have selected into an object which may be changed in any manner you choose, just as if you had built it yourself and then changed your mind. Changes to the object will have no effect on other instances of the symbol, nor on the symbol in the Symbols Panel, because it is no longer a symbol and is completely unrelated to either. If you wish, you may turn the edited object into a new symbol.
Duplicate turns the selected symbol instance into a new symbol, identical to the original but having no connection either to it nor to other instances of the original. If the first symbol was named "Original," then a new one will appear in the Symbols Panel named "Original 1." The same options will be available in the Control Panel, and any changes you make will only be applied to the new symbol and any instances of it that you may have put onto the artboard.
You may save your edited symbols through the Symbols Library Menu in the Symbols Panel.
If any of this is unclear, doesn't work, or is flat wrong, please let me know.
Peter

Save for the web

When I "save for the web" in Photoshop, why does Image Ready open? This adds time to my workflow.

I had 2 computer crashes - laptop and desktop at once. I only had Phostoshop CS but due to problems with Windows 8 etc. Adobe gave me a link to CS2 so I could still use Photoshop. On the desktop, I made some kind of setting where "save for web" stays in Photoshop, but on the laptop I evidently didn't make the same choice and "save for the web" goes through Image Ready. Any thoughts on that?
Thanks for any all replys.

Mail 3.1; Save PDF to web receipts folder

When I am mailed passwords for downloaded software, I need to save such important information in a preferred place. The web receipts folder is a perfect place in this instance. However, I can't seem to get my Mail application to successfully complete the menu chore of, "Saving PDF to web receipts folder."
After repeated attempts to get my file saved as the menu item suggests, I still can't find where Mail might be saving my receipt. The program goes through the procedure as if it is working properly yet I can find no results anywhere on my computer. ( I don't get any finder warnings, given repeated attempts to save, about replacing an existing file, either.)
Now I know this is likely to be all my fault but... Can anyone shed some light on my problem here?
I was able to successfully open and view my Mail message as a PDF file. I did manage to print that PDF file (opened in Preview) to my web receipts folder. I assume from my experience that the menu item, "Save PDF to web receipts folder," has somehow been disabled.

Never got an answer!

Overwrite files BUG! Save PDF to Web Receipts Folder

In Safari, I will often want to save receipts of bank transactions. So I hit Command-P to print, then in the PDF menu button, I'll choose "Save PDF to Web Receipts Folder."
When I look in my Web Receipts folder, it has saved the file, but if there was already a file there with that file's name, the old one is replaced by the new one. I found this out the hard way, as my bank's page title is always "National Bank," and Safari uses the page title as the file name. So instead of accumulating receipt PDFs there, I merely had the most recent one.
This is certainly a bug: the Mac shouldn't be overwriting files without telling me. If it's going to save PDFs in the Web Receipts folder, then I should have the option to choose a name or approve the name that it generates from the HTML title.

Yes I agree this is an intentional bug.
Other things you can do to get around this issue:
1) Disable the "Save PDF to Web Receipts.workflow" located at /Library/PDF Services. This is at the root level of your disk and you will need Admistrator level authority to accomplish this task.
2) After you disable the workflow you could build your own without the: "with replacing" (save file) option enabled in the script. However, I believe this will not work, as you are already in a dialog box (printer), and the script will generate an error, and prompt a dialog box for you to enter a new name. I am not sure if this is the conduct, as I do not use this workflow or "feature."
3) After you disable (or just plain not use) the above workflow: Instead create a folder in your Home Directory called "Online Receipts" or whatever memorable name you like. You can place this folder anywhere.
Next, navigate to ~/Library/PDF Services (that is the folder in your Home folder, not at the root level as in (1) above. If this folder is not there, create it.
Next create and drag an alias of your "Online Receipts" folder into this PDF Services folder.
The next time you pull up a print dialog, and hit the PDF button, you will see this newly created folder in the menu. Just select it to save a PDF of your document to it. Files with identical names will be handled by the Finder's naming convention: (eg. file.pdf, file 2.pdf, file 3.pdf, etc.) and no files will be overwritten.
I hope this helps,
Zac
PBG4, iMacs & 99-44/100 wireless Mac OS X (10.4.3)

Calling Methods inside BPS Web Excel

Hi,
Inside the layout2.htm file of a BPS Web Excel BSP application, there is some javascript,
layout_sheet.style.height
and
layout_sheet.style.width
, which control the height and width of the input and output layout screens. The code calls the methods
<%= layout->get_width( ) %>
and
<%= layout->get_height( ) %>
. What I have done is modified the screen so it dynamically adjusts to fit both the input and output layouts into the users screen, independent of their resolution, since not everyone has the same screen resolution.
In doing some research, there is another method,
layout->set_width( )
, that allows you to set the screen size for future reference.
How is it possible to take a value from javascript and submit it to this method? I have tried to set the javascript inside the parenthesis, but I get a compilation error then.
I hope I explained this well
Cheers!!
Kevin

Hello Marc,
We modified the JS3.htm too. just to have the possibility to use an autosave function. For instance if the planner doesn't do anything for 5 mins then save
This have to be done that way because of the architecture of the Web Interface. I mean Switching between frames means having 2 autosave timer if the coding would have been in a Text component
Best regards
Yannick
Message was edited by: Yannick Sigwalt
Kevin: Is it possible to get the coding of what you have implemented? sounds really interesting

Debug BPS web application interface

DEar All,
Would you please let me know how to active a debug in a BPS web applicatin interface.
I heard that something could be done under transaction se80, but what ?
Many thanks for your big help !

Hi,
Here are the steps for activating the debugging,
The <b>B</b>usiness <b>S</b>erver <b>P</b>age name is same as the name of the web interface
Goto SE80 on the left side dropdown select BSP application and give the name of the BSP = interface name.
Click on utilities->settings select tab ABAP Editor. Within this there are 4 tabs select the last one named Debugging. Select the check box named Actv and key ur user name (it should default to it). Hit Ok.This step is little diff depending on the WAS version.
Click the display icon on the left side this will display the componenets of BSP. In the tree open the node Pages with Flow logic. There will be a component called PM_PAGE.HTM double click on it. Click on a line that's executable (blue) and then click on the STOP button on the application toolbar.
This should do the job. let me know if you need more information
thanks

Open Bex workbook from BPS web interface,How hard it could be?

Hi all,
    I want to add a link or function-button in my BPS web interface,hope it could open a query(excel analyser),I tried 2 methods as follow:
   1. MIME , It can only open a static excel file, not a analyser query. I gave up this method.
   2. I use the program RRMX_START_EXCEL and add a plan function which is a EXIT in BPS0,in my EXIT function I used some code in RRMX_START_EXCEL,I test it in BPS0 ,it works ,it can open a analyser excel query.But when I put this plan function(including a parameter group ) in BPS_WB ,when I click the function-button in web interface, it crashed,says:
Error when processing your request
What has happened?
The URL http://bw1.:8000/sap/bc/bsp/sap/zwebcaxa001_998/page1.htm was not called due to an error.
The termination type was: TH_RES_FREE
and some other Error infomation,
Is it possible to realize my requirement? or Web interface and analyzer are just 2 total differrent things ,it is not possible to realize this?
thanks all

Hi Denny,
Have a look at www.javascript.internet.com and do a search for "whatfile".....
This should give you the javascript code whereyou can enter a file name (say an excel file name) and click a button to navigate to it.
Although I have not tried exactly what you have asked, I have successfully used parts of this code to open specified files (excel files) on our local directory from a BPS planning web page.
Obviously you will need to adapt the code to your specific evironment/situation...
Good luck.
Rael

How to hide cells in the sumation row in bps web layouts

Hello xperts,
I'm looking for a possibility to hide certain cells in the sumation row within a planing table (layout) over the webinterface builder.
can anybody help me.
I know there is a possibility to influence a table with the tableinterface for reporting tables.
Is there any similar possibility in BPS- Web interface builder like a java script ?
Please help !!!

Hi Thomas,
what exactly do you mean by "hide certain cells"? Do want to empty the contents of the cell or actually hide the cell? Hiding works for entire rows or entire tables, but hiding colums or even single cells is a bit more difficult (given, that when you hide one cell, the table loses its rectangular shape and the rows and columns don't match anymore ).
I mangaged to change the appearance of certain objects with javascript. But that works only if you have an ID or NAME attribute in the HTML-source. Let's say you have a button and want to make it disappear.
1. Create the button in the wi builder, name it button1.
2. Create a text/html field, mark the html flag.
3. Edit the long text of the field:
<script>
document.getElementById('button1').style.display='none';
</script>
That will make the button disappear. But I don't think that the display attribute will have any effect on a TD. You can try with style.InnerHTML or maybe set style.color to the background color. But in any case, the TD in the HTML code needs to have an ID or NAME. Otherwise it can't be referred. Maybe changing the bsp with SE80 helps?
Simon

How to reload the WRT160N through the web admin interface?

I see no way to do this, which is strange. Is there a way to reset through the web admin page or did Cisco gaffe on this? Thanks!

Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave the username blank & in password use admin in lower case...
Click on "Administration" tab and click on Factory Defaults subtab and select Restore All Settings, this should reset your router to Factory Defaults...
Also you have a reset button next to the power cable, Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

Save through BPS web button

Similar Messages

Maybe you are looking for