Save to Earlier Version (FLV)?

I created a movie in Flash CS3, and uploaded the swf/flv
files to my server.
Everything plays fine in all my test browsers, but the client
says she is seeing a 'flashing red icon' where the movie should be.
She's viewing on Mac Safari (Flash version 9.0.20).
Searching through this forum, it appears that the problem is
that her version of Flash is not high enough to view my files.
What I would like to do is save the movie to an earlier
version (7? 8?).
But when I change the 'Flash Player' in the 'Publish
Settings' to version 8, I get the following error message...
WARNING: The component 'fl.video.FLVPlayback' requires
ActionScript 3.0.
I'm fairly new to Flash so I'm not sure what this means.
I would really like to save the file at 'version 8' (or even
'version 7') if at all possible.
* the movie is pretty simple, so if I need to start from
scratch I'm willing to do that.
Thank you very much for your advice.
:Stacey

Thanks! - That makes sense.
For anyone who may be reading this later...
- The problem was that I created a new 'Flash 9' document,
and imported a movie into it.
- I had changed the Publish Settings to 'Flash 8', but that
only applied to the swf file. The FLV file was still 'Flash 9'
format.
- The solution was to start over (or delete the movie) and
import the movie while the document settings were set to 'Flash 8'.
Thanks again :-)

Similar Messages

Maximize Compatibility option to save for earlier versions?

1. Where is the Maximize Compatibility option in CS6 to save to earlier versions?
2. Does this option still exist in CC? If so, how is it enabled?
Thanks.

Ctrl or Cmd k to open your Preferences, go to File Handling, then right at the bottom of this section:

Save in early version

Hi at all,
Is possible open a report with CR 12
and after save it for CR 11
Thanks

Yes you can open a CR11 report in CR12 but once saved in CR12 you will NOT be able to open it again in CR 11. The CR Designer will warn you about this anyway.
Regards
Stratos

How do I turn off automatic save? Or How do I revert to an earlier version of my file?

I just installed Lion. I use numbers, and I wish to revert to an earlier saved version of my numbers file, as I lost data (blank sheet this morning) last night. I did not close the file overnight, but did this morning in an effort to open an earlier version of the file. How do I open an earlier version of my numbers file? Can I do this only if I make continual "running" backups of the file, or is there a way that Lion saves an earlier version a la Time Machine. Thanks much. Vince

Click the triangle next to the proxy icon and select Browse All Versions:

Acrobat 9.5 - use Touchup text Tool to edit PDF. Updates do not display. But, if I "save as" Word doc, the edits appear in Word. This feature worked in earlier versions of 9.x patches.

Acrobat 9.5 - use Touchup text Tool to edit PDF. Updates do not display. But, if I "save as" Word doc, the edits appear in Word. This feature worked in earlier versions of 9.x patches.

I have a suspicion you're working with a scanned document that has had OCR run to recognize the text. The recognized text may be stored on an invisible layer above the image of the text, and that is what you're toucing up. It's invisible, so you don't see it, but retains the changes, so exporting produces the new edits.
When you run OCR to recognize scanned text,, try using the ClearScan option, instead of Searchable Text. See this help page on Acrobat (this is for version X, but still applies):
Adobe Acrobat X Pro * Recognize Text - General Settings dialog box
mh++

How do I save a Numbers spreadsheet as an earlier version

I have just upgraded to Yosemite from Snow Leopard. I have a spreadsheet which I have sent to a third party and they are unable to open it as they are on an earlier version of Numbers. How do I save my spreadsheet in the format which they can open?

In the current version of Numbers you can use the File Menu Export item to save to a Numbers 09 compatible file.

How do I save Acrobat X file as earlier version?

I'm using Acrobat 10 pro to collate a number of docs including video into 1 pdf.
I want to allow my site members to rebrand the pdf with their affiliate links - set up as http://site.com/xxxAFFIDxx
But, Acrobat 10 encrypts the link and therefore it cannot be rebranded using my normal rebrander.
If I create a pdf using the Microsoft Word link I have the option of saving as an earlier version - say pdf 1.3 onwards. These are rebrandable but I obviously cannot collate a number of pdfs using word.
I believe the issue is the encyption but as hard as I've looked I cannot find what I need to change to enable me to do what I want.
Any guidance much appreciated

Thank you so much. I was trying to save the original as an older version rather than saving as a latest version and then making it compatible.
You're a star dbjackie.
Mark

Is it possible to save a pdf to a format of an earlier version of Acrobat than the one I have (i.e. Adobe 5.0 when I am running 6.0)?

Is it possible to save a pdf to a format of an earlier version of Acrobat than the one I have (i.e. Adobe 5.0 when I am running 6.0)?

How would I do it? I am running Adobe Acrobat XI (version 11.0.5). I am using an external software that allows me to upload pdf files, but it asks "Please regenerate the PDF using Acrobat 5.0 or lower"

Why when i save my indesign file down to an earlier version does it only save the first page of my document?

why when i save my indesign file down to an earlier version does it only save the first page of my document?

This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

In Pages, how does one 'Save As' - I only have the option 'Save' which wipes earlier versions

how can i save a newer version of any document in Pages without losing the earlier version?
What Microsoft so neatly do with either 'Save' or 'Save as"?

Brilliant thank you, only on mine it is called alt as I have only just discovered, and lo, as you say, Save As actually appears!
Apple isn't so obstinate after all - but why do they make it so difficult to find their simple solution? I even bought a book about switching (O'Reilly's) and nothing is mentioned about any of this.
I am very grateful to you all, now I have two options!

With CS6, can I save down to earlier versions?

If i purchase a license to CS6, will i be able to save down to earlier versions of CS or even just be able to open the CS6 files with earlier versions of CS (indesign, photoshop, illustrator...)??

Great, thank you. Do you know if i would be able to open CS6 files with earlier versions of the suite, specifically CS5 & CS2 (indesign, photoshop, illustrator...)?

I cannot open a document from an earlier version of pages.

Hope someone has a helpful solution for me. I am trying to access my resume that I did in an earlier version of Pages. I tried to open it today and saw an error saying that the document could not be opened. I have tried researching this and basically have no solution. I need my resume and don't know what to do. Has anyone else figured out a solution other than blowing up their computer?
Sharon

Copy/paste from TextEdit works. The use of Pages v5 has created more problems than user solutions. Make certain you export to Word format as a backup. Pages v5.5.1 will make a huge 500Kb Word document. You will need to open and save it out from either MS Word, or the free LibreOffice to reduce it down to small double-digits in size.
Sharon, there is a Yosemite community under the general category of MacOS & System Software. Post your Yosemite questions there, and you should get competent answers to your questions. Responders to your question(s) will want to know the year and make of your Mac, how much memory is installed, and if you upgraded to Yosemite from Mavericks, or an older OS X installation. The Apple > About this Mac can provide useful info. Be as concise as you can while still conveying the issue you want resolved. If you are running anti-virus software, state that as it is a known performance and stability decrement for OS X.
Yosemite is now one revision beyond the base release. Each new iteration of updates to Yosemite will fix bugs, attend to some usability issues, and improve performance. I am running Yosemite on a 2014 MacBook Air with 4GB of memory. It has been flawless — if not overly art-deco for my taste.

A very important site, does not function properly anymore, how can i go back to an earlier version of firefox

Before i downloaded your firefox 8.0.1, I used firefox to 'save as' the ''Unrealized gain/loss page'' from a brokerage account, - for my ongoing historical financial records file (safari doesn't work for this site).
On the Unrealized gain/loss page, there is a '+' symbol (in front of each stock owned) that one needs to 'clic' on (turns to a -) to see the various dates (and financial data) when you purchased different lots of the same stock. (say, ''IBM''; purchased IBM shares on 21-10-'11, 100 shares, @ $147, current price @ $180, gain of $33/share, total gain $3,300 / 10-14-'11 purchased 200 IBM shares, @ $191, current price @ $180, loss of $11/share, total loss $2200 / - and so on for however many individual 'lots' one has of that particular stock. ). This information is very important to me, and now i can not 'save' it.
- So I want to know how I 'fix' this - or - how I can go back to the earlier version, that did work.

To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

How do I fix a word doc. that turned to asterisks? Or find an earlier version of the document?

I was typing a paper and the entire doc. turned to asterisks. Then I panicked and hit save thinking that would be beneficial. Now I only have a doc. with symbols. Is there a way to find an earlier version of the paper? I have saved it at least a dozen times before the doc. turned to ***

Have you considered this ... since you suspect there may be old garbage in the file?
Try creating a brand new document in Word. Then try copying and pasting the old document into the new one. You may choose to do this in sections, or a few pages at a time.

Error message when opening CS6 files in earlier versions

PSCS6 with 12.0.4 update. Mac OSX 10.8.2 16GB 1333 Mhz DDR3 543 GB Available
I've recently become aware that other people are getting an error message when opening many of my my psd files if they are on earlier versions of PS and also on PSE, (including the latest version). The message is:
This document contains unknown data which will be discarded to keep layers editable. To preserve the original appearance instead, choose flatten to load composite data as a flattened image.
Three options follow: Flatten Cancel Keep Layers
When 'keep layers' is selected the file opens as normal. However, people with much earlier version (CS version 8) don't get the option to keep layers, and the layers are flattened when the document is opened.
I still have CS5 on my mac, and I find that if I take my finished file into CS5 and save it there, the customer does not get the message above, and the file behaves as it should. Those on very early version of PS can also open the files without any issues.
I've been using CS6 since it was released and have had to delve through all my files and save them in CS5. Not every file is affected and I've been unable to find a common thread.
Hoping someone can throw some light on this.

This similar to the message one should get in an older version of photoshop such as photoshop 7.
If one presses ok instead of read composite that might preserve the layers with the original look.
But sometimes if a layer blending mode or some other feature is used an earlier versions of photoshop doesn't have, reading the composite is the only way to preserve the look of the image.
You said your using shape layers?
If they are shape layers you didn't use a stroke from the tool options bar?
Can you post an example of the image with the layers panel visible that you get that message with?
I guess your using photoshop cs6 with the 13.01 update?

Save to Earlier Version (FLV)?

Similar Messages

Maybe you are looking for