"SAVEANDBACK" Button In Folloup Activity from Service order

Hi,
Give me solution...
Here Created folloup activity from service order in web ui.....In folloup activity after click the SAVEANDBACK then opend the serviceorder.....but i added the data in folloup activity... that data not refresh in serviceorder transaction.....if i opened agin same service oreder that time .. the folloup activity data apper in service order.....after click the SAVEANDBACK button in folloup activity that not refershing the values in service order..
Thanks
Kooiti..

Hello again,
Does anyone know how to copy the Ibase from the Service order to the activity, please?
Thank you.

Similar Messages

Text Flow from service order to requisition

Hi Everyone,
I having a problem regarding text flow from service orders IW31/IW32 to requisition ME53N.
I created/updated a service order in IW31/IW32 and enter some text in "Operation Short Text" column. When I release the service order the short text should ideally be reflected in purchase requisition. What's happening right now is that "If the length of text entered in IW32 is more than 40 characters then the text is reflected in requisition ME53N otherwise any updates to this column text are not reflected in ME53N".
I debugged ME53N and found that it gets the value of text using READ_TEXT so I hope the same is stored in standard text while saving IW31/IW32. I checked the text also which is created after saving Iw32 and it contains changed data only if the length of the data is more than 40 characters.
To me it looks like standard SAP process that the text will flow from service order to purchase requisition only if the data length is more than 40 characters. If anyone has any idea can you please share. Is there any sugesstion for correcting this. Any reason or OSS.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Aug 13, 2008 3:30 PM

Hi,
my situation is:
- a WM managed warehouse, society A;
- a HU managed warehouse (without WM), society B;
- a purchasing process of HU from society A towards society B.
Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
"V51VP - item was not found - process cancelled".
Can you help me to transfer these HU?

Copy data directly from service order to sales quotation

I know the process to create the sales quotation from service order in customer interaction center but my query is that is there a way that data should be directly copied from the service notification to the service order to the quotation because I have entered the data completly in the notification .Entring the data again and again make mistakes .
THANKS
AVANISH GULATEE
M-08447307358

look for the BADIS that get triggered when you save the notification. if you find any BADI, then you can create new implementation for it and you can write the code. you can use CRM_ORDER_MAINTAIN to create service order inside that new implementation.

PME - Configuration Copy From Service Order Quotation to Service Order

Hi,
We are in requirement to copy the Product configuration in CRM 2007 from Service Order Quotation to Service Order.
After Configuring a Product in Service order Quotation, the product configuration is not copying to the Service Order if created using follow up documents.Only Product is Copied to the followed up transaction with the copy control method in customization.
Please advice..
Regards,

Hi,
Problem solved...
In the Copy Control of the Item Category in IMG the Process Flow option was not maintained.
Regards,

FM/Class for creating service confirmation from service order

Hello Gurus,
Does anyone know a FM/BAPI/Class to create service confirmation from service order ?
With warm regards,
Kallol Bhowmick

Hello Kallol
You can trigger a confirmation from service order using action profile.
Here is how to define action profile:
IMG > CRM > Basic Functions > Actions > Actions in Transaction
Dialog Stucture> Action profile:
Object type = BUS2000116
Context class = CL_DOC_CONTEXT_CRM_ORDER
Dialog Stucture> Action Definition:
Processing time: Processing using selection report
Check box schedule automatically, Changeable in dialog and executable in dialog.
Dialog Stucture> Processing types
Permitted processing types of actions: Select - Method Call
Settings method call: Method - COPY_DOCUMENT (you can also try COPY_DEF_ITEMS)
Processing Parameter:
-Select change icon a new window opens - container editor
-select create icon another window opens - display container editor
Here enter following:
Element = PROCESS_TYPE
Name = PROCESS_TYPE
short desp = PROCESS_TYPE
Tab > Dtype:
Structure = CRMC_PROC_TYPE
Field = PROCESS_TYPE
Tab> initial value
Here maintain the transaction type of your confirmation.
save your action profile. Now assign action profile to Service oder transaction type.
I hope this info helps.
Regards
Rupesh Patil

Quotation number from Service order or notification

Hi,
As per the process, we create service quotation from service order using the transaction DP80. I can get the service order number from the quotation (VBAK-AUFNR). But I need to get this quotation number from service order or service notification (it is updated in the document flow). Could you please help me?
om which tables (service order or notitification) I can get this quotation number?
Regards,
SAM

Hi,
One option I used in the past is to call FM RV_ORDER_FLOW_INFORMATION and then analyze the result given from this FM.
Do a Where-Used List search for this FM and you will find some examples in standard SAP.
It can be somewhat challenging to understand the outcome but I can can be done.
I assume you want to analyze this after the service quotation has been created. If not then use available User Exits for the RRB processing creation. Search for RRB and consulting in SAP Notes.
Good luck, Johan

Getting quotation number from service order

hi
i have a situation where i need to find the quotation number created by DP80 from a service order.
    i'm able to find service order number from quotation but that does not solve my problem. i need to find the quotation number from service order number.
   pl help.
thanks in advance

hi Koustav,
    I'm in same situation as yours. i need to update preceding Qutation from the service order and only if a precticular item category is precent in service order.
As u have already worked on Qutation n service order stuff.. can u plz suggest me some thing.
thanks in Advance

Service Quotation number from Service order

Hi,
As per the process, we create service quotation from service order using the transaction DP80. I can get the service order number from the quotation (VBAK-AUFNR). But I need to get this quotation number from service order or service notification (it is updated in the document flow). Could you please help me?
om which tables (service order or notitification) I can get this quotation number?
Regards,
SAM

Hi Pete,
If I pass the service ordernumber to PMSDO, I can't get the quotation number. Is there any way to find the document flow of service order or notification? Is there any table I can use for the same?
Regards,
SAM

To create project from service order

Hi All
Is it possible to create project (network Order ) from Service order ( SM01,SM02,SM03)??? if yes... How???
Neil

Are you referring to Assembl;;y processing ?... You can create service order from Sales Order, but you cannot create proejct from Service order automatically.
With regards
Nitin P.

Error in navigation from service order to BP

hi,
I have created a button on IBASE screen(IBMAIN Component ---IBMAINViewset(create button)).on this event ,I called a outbound plug ,Through this outbound plug I called a navigation link in which source view is IBASEMAINViewset and Target View is BT116M_SRVO.It's Working Fine when I clicked on this button.i.e
It migrates from IBASE to service Order and Service Order is saved successfully. But When I click on Customer id (hyperlink comes after save )of this service id. then it gives Error that :
"Define Navigation Link BP for Source View Zservice.MainWindow".
Please suggest any Solution.
Thanks,
Hem

Hello Shravan,
Check this weblog:
/people/raja.thangamani/blog/2007/06/27/bsphow-to-create-attachment-in-business-transactions
Best regards and good luck,
Bruno

DP90 from service order, and value contract (Resource related billling - DIP Profile)

Hi all, I've this issue:
I have created a value contract with an only position, dummy service material (DIEN) via VA41. Then, I've created a service orden with IW31, related it with sales document (position 10 of mentioned value contract). I've did confirmations for several opertations from the order (an operation --> an activity type). In a zeta DIP profile I've link activity tipes with anothers DIEN material. This DIP profile is in orden.
I can create sales order with DP90, everything ok! But... value released has not been actualized in value contract...
I found this note, number 1176009, "Value contract FAQs", and say it:
Question: Does the value contract scenario support documents that were
created using resource-related billing (for example, DP90, DP91, DP..)?
Answer: No, this function is not supported in the standard system and
results in update terminations in the statistic.
Which is the solution?
Thanks on advance.

Well, I think I find the solution. I did it with BADI BADI_SD_V46H0001, method EXIT_SAPLV46H_001, and this code:
METHOD if_ex_badi_sd_v46h0001~exit_saplv46h_001.
c_vbapkom-wktnr = c_vbapkom-vgbel.
c_vbapkom-wktps = c_vbapkom-vgpos.
ENDMETHOD.
I'm testing, but it's working.

Creation of Sales Order from Service Order

Hi All,
I am usind BADI Workorder_update and method at_save to create a Sales Order while saving the Service Order.
I have created the ZBAPISALESORDER_CREATEFROMDAT2 which is a copy of BAPI_SALESORDER_CREATEFROMDAT2(Since order type was ZDR).
I have written the following stmt for Debt Memo.
            BUSINESS_OBJECT         = 'BUS2096'              " Debit Memo
This BAPI is working fine and giving the Sales Order Number as a pop-up for information.
But now, the problem is coming with Service Order Creation (In the transaction IW31). It is giving short dump while saving the service order after creating the sales order.
I have checked in the standard code of Service Order. Dump is coming at
Include : LCOZFU64
Function Module:CO_ZF_PROJECT_BUDGET_CHECK
Line : 258
IF caufvdg-netzkont IS INITIAL.
          CALL FUNCTION 'STATUS_CHECK'
            EXPORTING
              objnr             = caufvdg-objnr
              status            = stk_vkt
            EXCEPTIONS
              object_not_found = 01
              status_not_active = 02.
          subrc = sy-subrc.
        ELSE.
        ...ansonsten kann man das an NETZKONT erkennen!
          IF caufvdg-netzkont EQ con_kont_kopf.
            subrc = 02.                "kopfkontiert
          ELSE.
            subrc = 00.                "vorgangskontiert
          ENDIF.
        ENDIF.
With my code of BAPI, it is returning sy-subrc = 01 (Object not found).
Without my code of BAPI (Standard code of IW31), it is returning sy-subrc = 02 (status not active) which is the right one.
Kindly help me in this regard.
Regards,
Priyanka Vasudeva.

Hi,
There are various scenarios to support end to end work managmenet process in IS-U find attached detail document at link below.
[http://help.sap.com/saphelp_utilities472/helpdata/en/6a/1a6c35a018d041e10000009b38f839/frameset.htm]
Scenario A describes process of creating sales order based on service order.

Restrict Deletion of Components from Service Order

Hello All,
I noticed that I am able to delete the components from the Components tab of a Service Order even after I have completely issued the components.
Is there a possible way to prevent deletion of components that have already been issued..?
I think I can use the Business Transaction RMKL in the system status GMPS. But I guess this will prevent deletion of those components which have not been issued to the service order.
What would be the best way to prevent deletion of components that have already been issued...?
Thanks
Jensibo

Hello All,
I don't know if you all received the last reply I posted against this thread... coz I am not able to find it in the thread. I had asked for your comments on any repercussions that may occur because of this config.
Anyway, the thing is, I followed Narashiman's suggestion and although I did not use the exact config he pointed me to, I used the config in the following nodes:
1.) Production --> Shop Floor Control --> System Modifications --> Define System Message Attributes
2.) Production Planning & Process Industries --> Process Order --> System Modifications --> Define System Message Attributes
and added an entry: Application Area = CN, Message No. = 750-Component & item & was already withdrawn and Category = E.
Having done this, the system did display the "Component & item & was already withdrawn" message when I tried to delete a component that was issued to a service order, but it did not delete the component from the service order. I was able to save the service order with the issued component still in the components tab.
Narashiman,
to specifically respond to your latest reply, I did find the node you pointed me to. But the trouble was that it did not have an entry for CN750 in it. When I tried to add an entry, the system did not let me do so and displayed the error message "Please specify a legal value".
So I went around opening each system message control node and finally found the two that I mentioned earlier that did work for me.
Thanks
Jensi

Problem follow-up item from Service Order to Complaint in IC CRM 7

Hi gurus,
From a Z Interaction Center CRM 7 role (Front Office agent) create by ourselves, we need to create a follow-up complaint from a service order, exactly we need to create a CRMC transaction follow-up from a SRVO transaction. We have do the copying control between these two transactions.
The items categories that we use are, for SRVO transaction, the SRVS category (Product) and, for CRMC transaction, the COMP category (Complaint). We also have do the copying control between these two items categories.
In addition, we have defined the following item category determination when copying:
Source category: SRVS (Product)
Target transaction type: CRMC (Complaint)
Target item category: COMP (Complaint)
When we use a the CRM 7 role SERVICEPRO (Back Office agent), we can create a Complaint (CRMC) follow-up from a Service Order (SRVO) and immediately it appears a pop-up that allows to select the item of the Service Order to add it as a item of the Complaint. But when we use the Z Interaction Center CRM 7 role and do the same, we can't select this item, no pop-up appears.
Please, is it necessary to do some configuration for it? Our Front Office Agent has to be able to do it.
Regards,
Jesus

Hi Jesus,
I was suspecting this, we had a similar problem in CRM 6.0, i thought this is no more there in CRM 7.0. Well we had raised an OSS message for this and the reply was a development in the view or use the service pro view(sans)ICWEB apllications.
This happens with any followup you want to create in the ICWEB view since there is no pop up here.
I would suggest you to raise an OSS for this
Regards
Raj

Create purchasing requisition or purchase order from service order

Hello experts,
we are facing the following problem:
We are implementing Customer Service module and out of the notification we create a service order. In the service order (components tab) the technician declares the spare parts he has to order from the vendor. We do not keep stock of the spare parts so all of them have to be ordered from the vendors.
We have managed so far to create a reservation for the stock material and a purchase requisition for the non-stock materials of the service order according to the standard sap documentation. What we need is to create a purchase requisition or a purchase order for the stock items using standard logic.
Thanks
George

Hi
Please follow the steps it will solve your scenario
Steps involved in Service PO:
1.Define Organizational Status for Service Categories, in IMG - MM - External Services Management.
2.Define Service Category, Enter Service Category, Org. Service Category, External Number Assignment
Without Validation, Acct. Category Reference & Service Category Description.
3.Define Number Ranges for Service Category.
4. Create Service Master Record (AC03), SAP Menu u2013 Logistics u2013 MM u2013 Service Master, Enter Service Category,
Base unit of measure, Mat/srv.grp (007 u2013 Service), Division, Valuation class u2013 3200 & Service type.
5.Create Service PO with Acct. Assignment u2013 Cost Center (K), Item Category u2013 D, Material Short Text, Mat. Group, Plant, Entry for Services in Item Level i.e. Service No., Quantity & Gross Price u2013 Save.
6.Maintain Service Entry Sheet u2013 ML81N in SAP Menu u2013 Logistics u2013 MM choose PO in ML81N edit and save.
7.Then do MIRO from PO reference u2013 Service Entry sheet.
8.Collective Release of Service Entry Sheet u2013 ML85
Thanks & Regards,
Mani

"SAVEANDBACK" Button In Folloup Activity from Service order

Similar Messages

Maybe you are looking for