Saved addresses not stored

-i use the add sender icon to capture email address and contact information.
-i complete whatever details i want to include
-if i exit and then re-enter thunderbird, then type the recipient's name in the to field...it shows up in red, with no record of it in either address book

Wrt Thunderbird, what exactly is in your backup?
What you'd need is the Thunderbird profile.
http://kb.mozillazine.org/Profile_folder_-_Thunderbird

Similar Messages

Email addresses popping down that I have not stored in my address book. How do I delete them?

When I start writing a letter on a new email, a pop down menu with addresses show some "contacts" or email addresses that I have not stored or used.
How can I get rid of them? This is on the mail app. that comes with the iPad.
Any input anyone? Thanks.

Something really strange is going on here. First, I went to do the same comparison that you did. In my case, I intended to compare Mail on my original iPad with Mail on my Mac. I was completely unable to locate the "Previous Recipients" list on the iPad. Where is it?
I did attempt to do a lesser comparison by creating a message on the iPad and putting "a" in the "To" field. Up popped several dozen recipients that begin with the letter "a." I was unable to match the listing up with the listing in the Mac on a one-for-one basis (because the sorting is different) but I did locate several addresses in the iPad that are unquestionably not in the Mac. HOWEVER, the real confusing part is that I know for a fact that I have not sent any emails to these individuals for over five years (and, obviously, I could not have used the iPad)! One is a former manager at a company that I worked for ten years ago. Another is the contact at the medical insurance company for the same employer.
The items in the Mac listing were equally weird. Many, of course, were legit but there were several that I know for a fact that I had absolutely never sent any messages to these recipients. One that stood out is an address with the name "Bladder Cancer Lawyer" and it was allegedly "last used" several weeks ago. A message to such an individual is not something that I'm likely to forget (especially rather quickly).
Right now, I am thoroughly confused. Just for giggles, I'm going to delete the entire list on the Mac and see what happens. Actually, I'm going to stall for a while just in case you come up with another thought.

How do I delete email addresses not in my contact list?

My phone seems to be storing every email address I send to. When I create a new message and start to type in an address it brings up every email address I have ever sent to including those I only used one time. How do I delete these email addresses and prevent the phone from storing addresses not in my contacts?

I posted something on this a few months ago. Hopefully Apple updates the OS to allow for editing the cache. I have done it in Mail on my mac for years when the list stores old and/or outdated email addresses. It is definitely nice to be able to clean this list up so that A) you don't make mistakes, and B) you don't have to sift through a bunch of useless email addresses in order to get to the one you are looking for.
It is especially annoying when you have an email address that has a mistake in it, such as having one letter off by accident. Then, it is stored forever and you have to avoid choosing it every time you want to send to that recipient.
I really hope Apple fixes this simple issue with an update. One thing that I can't quite figure out is why the iPhone engineers didn't build into the iPhone some of the great features of the Mac. Another example of this is in Contacts. Contacts is like Address Book, but it doesn't quite let you do everything that Address Book Does. Don't get me wrong because it is close. For example, when you want to add a new field, you don't have the same amount of the choices on the iPhone that you have in Address Book. Now why should this be? How hard could it be (and what problems could possibly arise out of) making these the same? What is the point of MobileMe and instant syncing if when creating a new contact on your iPhone, you still have to go into Address Book and add information? Also, why shouldn't you be able to store the same amount of information in your iPhone Contacts that you store in your Macs Address Book?
For a company like Apple who is so detailed oriented to overlook these kinds of details is confusing to me.

Email Address not visible for output device MAIL in created batch job

Issue in ECC6.0: Email Address not visible to display/change for output device MAIL in print parameter of each step in the created batch job.
User wants to periodically receive report file via send to his email, so I create the batch job running report and send the report in pdf file to his email.
Detail in the batch job
1) In print parameter screen of the step in the batch job
-Using output device MAIL (output type ZPDF1)
-inputting email address of receiver in the EMAIL ADDRESS field
2) After the batch job was saved, I tried to display/change the field EMAIL ADDRESS via Tx. SM37, but this field is invisible. The field can not be displayed or changed anymore. I also tried in SM36, but it is for creating new batch job, not changing the existing batch job.
4) User receives email with pdf file from the batch job.
How to change/display the email address of the receiver in the created batch job?
Note that we just changed to use SAP ECC6 from SAP 4.6c. In SAP 4.6c, we can change/display the
Email Address Field via Tx. SM37.
Pls kindly suggest, thank you very much in advance.

Hi Srirompoti,
After saving the job if the job has not started then you can follow the below steps to change the Email address.
1. View the job from Txn SM37.
2. check the check box for your job that you want to change and goto menu path "Job->change
3. in the next screen goto "Edit->steps." or press "F6" key
4. place the coursor on the job and goto menu path "Step->change->print specifications.
5. here you can change the email address.
If you are not able change the data then you might not have authorization.

Error saving map. Stored procedure returned non-zero result BizTalk Bug

Hallo all
MSDN is reporting this Bug.
"Error saving map. Stored procedure returned non-zero result." error message when you deploy the BizTalk Server 2010 applications in BizTalk Server 2010 Administration Console"
http://support.microsoft.com/kb/2673264/en-us
I am having this problem in BizTalk 2013. Is this correct? or I am doing something wrong..
This error occured as I was about to deploy BizTalk application from Visual studio 2012 to BizTalk 2013.
If this bug is available in 2013, where can I get a fix for it..
Thanks in Advance
AKE

Hi AKE,
Fix for this bug in BizTalk Server 2013 is not publicly available yet. Only option to get the fix for this bug is to contact:
http://support.microsoft.com/contactus/?ws=support
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

Ip address not changing

Hi All
I am new to iMac's for about a year now. I had a question about ip addresses not changing. I have various devices in the house and when I change wireless networks they automatically update their ip address. Not so so for the iMac running Yosemite. It seems to have stopped working some months ago and I have been getting around this by changing the ip address manually in Network Preferences. This is becoming pain as you can imagine especially when other non familiar people use the computer.
The reason for the two wireless networks in the house is because I have one network which is without VPN and the other VPN connected for streaming services. I can't run all my regional services from the VPN connected network.
Thanks in advance for any help someone can give.
Regards
Vivian

Start up in Recovery mode. In the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. While in Recovery, you'll have no access to your saved bookmarks or passwords, so make a note of those before you begin, if they're needed for the test.
Test. After testing, restart as usual and post the results.

Error saving map. Stored procedure returned non-zero result. Check if source and target schemas are present.

I am using VS 2012 and BizTalk 2013 and attempting to deploy an application to BizTalk when I get these errors:
Error 47
at Microsoft.BizTalk.Deployment.Assembly.BtsMap.Save()
at Microsoft.BizTalk.Deployment.Assembly.BtsArtifactCollection.Save()
at Microsoft.BizTalk.Deployment.Assembly.BtsAssembly.Save(String applicationName)
at Microsoft.BizTalk.Deployment.BizTalkAssembly.PrivateDeploy(String server, String database, String assemblyPathname, String applicationName)
at Microsoft.BizTalk.Deployment.BizTalkAssembly.Deploy(Boolean redeploy, String server, String database, String assemblyPathname, String group, String applicationName, ApplicationLog log)
0 0
Error 49
Failed to add resource(s). Change requests failed for some resources. BizTalkAssemblyResourceManager failed to complete end type change request. Failed to deploy map "XXX.BTS2013.XXX.Maps.map_XXXX_R01_InsLabProc".
Error saving map. Stored procedure returned non-zero result. Check if source and target schemas are present. Error saving map. Stored procedure returned non-zero result. Check if source and target schemas are present.
0 0
Error 46
Failed to deploy map "XXX.BTS2013.XXX.Maps.map_XXXX_R01_InsLabProc".
Error saving map. Stored procedure returned non-zero result. Check if source and target schemas are present.
0 0
I also tried to Import a MSI file from our test environment to see if that would work...got the same errors. After spending hours (not kidding) looking for an answer, all I could find is that a hotfix would work. So, I got the hotfix from Microsoft
Support and applied it then rebooted. Still getting the same errors. I'm absolutely at a stand still. Interesting that I got this application to deploy yesterday and then the next time I deployed it I started getting these errors. I'm
ready to pull my hair out!
Is there an answer for this out there somewhere? Any help would be appreciated.
Thanks,
Dave

Hi Dave,
Which hotfix have you applied? I don't think a hotfix of this issue is available for BizTalk 2013 yet. You should create a
support ticket with Microsoft to get a solution.
If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

6220 camera pics not stored in gallery

Hi,
Anybody who can help me troubleshoot this. The images folder is lost and all pictures taken by my Nokia 6220 is not stored even if I add an "Images" folder. Everytime I take pictures, the filename goes on and on but I can't find where those pictures are stored.
Please help.

Hi,
I am having this exact same problem.
I take a photo on my camera, go to the gallery where it should be saved and it shows as empty. I am also missing all my music files, sound files and videos and a while ago all my contacts disappeared too.
However, I have noticed that if I go through the menu to Settings > Data Mgr > File Mgr > Memory Card > Images, all my photos are stored there, as are the music files under 'attachments' and the videos under 'video clips'. So the files are there, they are just somehow hidden.
Any ideas why the gallery is not showing them?

Firefox keeps dropping my bookmarks or perhaps not storing them when I ask it to. Is there a fix?

Firefox keeps dropping some of my bookmarks and not storing others when I ask it to. Also, in searching for answers, I found out that I have 2 profiles. I couldn't open any of the 3 items in the first but in the second one I found a number of dated bookmarkbackups files. Am I supposed to have 2 profiles? How do I fix all this.
I have also noticed other anomalies and wonder if they are part of the new 32.0 download I just got. Today, twice, exactly 27 instances of Firefox opened when I clicked on it just once.

These can't get your data back, but will help in the future.
These add-ons can be a great help by backing up and restoring Firefox
'''[https://addons.mozilla.org/en-US/firefox/addon/febe/ FEBE (Firefox Environment Backup Extension)]''' {web link}
FEBE allows you to quickly and easily backup your
Firefox extensions, history, passwords, and more.
In fact, it goes beyond just backing up -- It will actually rebuild
your saved files individually into installable .xpi files.
It will also make backup of files that you choose.
'''[https://addons.mozilla.org/en-US/firefox/addon/opie/ OPIE]''' {web link}
Import/Export extension preferences

Indesign cc files not saving but not giving an error message

Indesign CC files not saving but not giving an error message
I have all my restaurant menus in Indesign cc and when emailing them to myself, after changing them to print them from a different computer I experience that the files are not the most updated version.
Can anybody suggest a solution?
Thanks
Janine

Ask in the ID forum and provide at least some useful info like system specs, what's contained in the files, where they are stored...
Mylenium

ADRC - Address Note

Hi all expert,
i can update the Comment field at FK02 (Address Note), and can see the update result (REMARK) when i view the ADRC table.
But when i need to do Select statement to select the Address Note from ADRC table, it show
"The data object "ADRC" does not have a component called "REMARK"
Can anyone advice me how to select this field?

as texts are usually language dependend they are stored in extra tables like ADRCT

Excise invoice is not saving and not showing datas

in erxcise invoice i ve made settings as per the sap best practices then also the excise invoice is not saved and not generated also
please help me to solve the problem
the error is coming like this
Error in allocating Excise invoice number Interval not found Number object J_1IEXCLOC
Message no. 8I336
i ve already maintainthe number range for this object in tool in tax in goods moment
please give some better advice for the excise invoice setting.

Sub Transaction type determines the subcontracting attributes and determines the accounts for the posting while doing a sub contracting transaction.
Sub transaction type is also used for determining the accounts while
doing excise removals.
Within CIN the account determination is based on the transaction type.
So normally you can have a single set of accounts for Excise
utilization. In case you need alternate account determination for
handling various scenarios you can define sub transaction types. The
sub transaction types and corresponding account assignments needs to be
maintained in CIN customization
To make customization of Sub Transaction type, goto
<b>SPRO --> Logistics General --> Tax on Goods Movements --> India --> Account Determination and check whether you have assigned second and third one, viz. "Specify Excise Accounts per Excise Transaction and Specify GL Accounts per Excise Transaction".</b>
Check
<b>Taxes on goods mvnt--indiaaccnt determination---specify excise accnts for excise transaction...maintain the sub transction type , ip or 01,
against the appropriate ETT</b>
Message was edited by:
sam masker

Gr/ir slip field value is not stored in table mkpf..!!

dear sap gurus,
    i have a typical problem.. i am doing Transfer posting from one storage location to another. using MB1B with 311 mov type.. and mentioning some values in the gr/ir slip field.. but system is not storing the value in table..
Can any one say how to solve this.. if i use MIGO_TR then its storinghte value i mentioned in MKPF table..
Regard,
Manu

Hi Manu,
This GR/GI slip number has only been designed for use in those countries (for example, Italy) whose legislation requires specification of this number for goods that leave the plant and are transported on public roads. In other countries, the material document number printed on the GR/GI slip (in the standard system) is usually sufficient. To enter external documents, you can use the field Material slip or Delivery note.
If still wants to use this field you are required make relevent settings in config.
Please go to transaction OMC1.
There you will find 4 push buttons.
   1. Activation of GR/IR slip for plant.
   2. Number range grouping code.
   3. Intervals for number range.
   4. Object(here you are assigning the number range for the plant, storage location and movement type.
This will allow you to store GR/IR slip number in MKPF with trx. MB1B
Regards
Mauro

Data not storing in Custom infotype build with tab strips

Hi All,
I have created one custom infotype 9030,
With screen 2000.
which is having tab strips, I have build the screens refering to p9030-zztest its not storing in database.
where I am doing wrong...please let me know what should be done in this case.
Regards
Satish.v

Hi,
Checkout the below link :
<link to blacklisted site removed by moderator>
Shailaja Ainala.
Edited by: Thomas Zloch on Jan 28, 2012 9:06 PM

In FTP server file not storing in proper order when 'FTP_R3_TO_SERVER'

Dear ,
when i used FTP_R3_TO_SERVER to download data in FTP server
i checked in FTP server file is not storing in proper order in FTP server . plz help how to get the file in proper order .it urgent . full points must be given. i given code below .
DATA : BEGIN OF iresult OCCURS 5,
rec(450),
END OF iresult ,
DATA :
dest LIKE rfcdes-rfcdest VALUE 'SAPFTP',
compress TYPE c VALUE 'N',
host(64) TYPE c.
DATA: hdl TYPE i.
DATA: BEGIN OF result OCCURS 0,
line(100) TYPE c,
END OF result.
DATA : key TYPE i VALUE 26101957 ,
dstlen TYPE i,
blob_length TYPE i.
host = p_host .
DESCRIBE FIELD p_password LENGTH dstlen IN CHARACTER MODE.
CALL 'AB_RFC_X_SCRAMBLE_STRING'
ID 'SOURCE' FIELD p_password ID 'KEY' FIELD key
ID 'SCR' FIELD 'X' ID 'DESTINATION' FIELD p_password
ID 'DSTLEN' FIELD dstlen.
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
user = p_user
password = p_password
host = host
rfc_destination = dest
IMPORTING
handle = hdl
EXCEPTIONS
not_connected = 1
OTHERS = 2.
IF sy-subrc = 0.
CONCATENATE 'cd' ftppath INTO ftppath SEPARATED BY space .
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
handle = hdl
command = ftppath
TABLES
data = result
EXCEPTIONS
command_error = 1
tcpip_error = 2.
IF sy-subrc = 0 .
CLEAR result .
REFRESH result .
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
handle = hdl
command = 'ascii'
TABLES
data = result
EXCEPTIONS
command_error = 1
tcpip_error = 2.
IF sy-subrc = 0 .
DESCRIBE TABLE iresult LINES lines.
blob_length = lines * width .
clear : lines.
Delete the existing file
CONCATENATE 'del' ftpfile INTO delfile SEPARATED BY SPACE.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
handle = hdl
command = delfile
TABLES
data = result
EXCEPTIONS
command_error = 1
tcpip_error = 2.
*End of deleting the existing file
CALL FUNCTION 'FTP_R3_TO_SERVER'
EXPORTING
handle = hdl
fname = ftpfile
blob_length = blob_length
TABLES
blob = iresult
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF sy-subrc 0 .
WRITE 'Error in writing file to ftp' .
ELSE.
WRITE 'File downloaded on the ftp server successfully'.
ENDIF.
ENDIF.
ELSE.
WRITE : 'Path on ftp not found : ' , ftppath .
ENDIF.
CALL FUNCTION 'FTP_DISCONNECT'
EXPORTING
handle = hdl.
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
EXPORTING
destination = 'SAPFTP'
EXCEPTIONS
OTHERS = 1.
ELSE.
WRITE 'Could not connect to ftp' .
ENDIF.
ENDFORM. " FTPFINANCEACCESS_DOWNLOAD
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-name = 'PASSWORD'.
screen-invisible = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Edited by: manoj kv on Feb 27, 2008 12:55 PM
Edited by: manoj kv on Feb 28, 2008 5:37 AM
Edited by: manoj kv on Feb 28, 2008 5:39 AM
Edited by: manoj kv on Mar 5, 2008 2:15 PM
Edited by: manoj kv on Mar 7, 2008 12:51 PM

Hello,
Did you try to put 'X' to the parameter CHARACTER_MODE.
Hope it will help you
Olivier

Saved addresses not stored

Similar Messages

Maybe you are looking for