Saved documents Too Large

I downloaded a newer ver of Adobe reader XI. Now all my docs save in 150 + Zoom (large). I had the same problem with my older version, but I fixed it by going into 'PREFERENCES--> PAGE DISPLAY' abd adjusting the 'ZOOM' to 100%. I did this here with the newer version but this won't work and they still save too large WHY?

Ok, But how do I fix? Now, I save a document and it is too large? I know I had this problem before and I fixed it by setting my Zoom setting in ‘Preferences’ in MY reader (on my installed application on my hard drive) to 100%, and all the document I opened thereafter on MY Adobe Reader were regular size. (Fit to screen). Now, I open documents and they are all zoomed to 164%.
WHY? How can I fix?
Thank You
Ernest Lee

Similar Messages

Printing pdf documents too large acrobat pro 10.1.12 and OS 10.9.5

Using my Acrobat pro 10.1.12 and IMac OS 10.9.5, all my pdf documents print about 10 - 15% too large and run off page even though they are standard size documents and print fine using my Mac Air OS 10.8 and Acrobat Pro 10.1.1. The "shrink" and "Fit" settings are ineffective and I don't think they should be necessary anyway since these are standard size documents. Please help!!! THANK YOU

Correctn. My problem came from firefox. Once I changed page setup under the file heading, it worked fine. Seems the new install of adobe somehow changed the setting in firefox to 150%.

Dimension of Pages document too large to display

I'm working on a large banner for a client (3 meters wide, 1.5 meters high) and Pages doesn't seem to be able to display the whole document when I choose fit page. Have I run into a limitation of the app? Is it a bug? Any workaround?
Thanks!

The smallest scale is 25%, which translates to 750x 375mm or roughly 2125 x 1063 pixels, viewable on larger iMacs. Works on mine in both Pages '09 and Pages 5.
What version of Pages are you using?
Have you tried scaling the banner?
Peter

Saving PDF too large

Using the OSX feature "Print" - "Save as PDF" creates an enormous PDF. A file that should be 100K may save as 13M. Is there a way to optimize or shrink this?
Thanks,
Ted
G3 Pismo Mac OS X (10.3.9) 500Mhz, 740M Ram

If you still have OS 9 on your Mac, check out PrintToPDF - Mac printer driver that creates PDF files (readable by Adobe Acrobat Reader or GhostScript on any platform). You do not need to have the full Acrobat package (as opposed to the Reader) installed for PrintToPDF to work.
http://www.jwwalker.com/pages/pdf.html
Are there graphics in your document?
Cheers, Tom

"The document can't be opened because it's too large."

I just copied a Numbers '09 file I just made at work (and can still open there) to my MBP and when I try to open it, I get a "The document can’t be opened because it’s too large." error. It's only 1.4MB. I tried reinstalling iWork and re-saving and copying the file to no avail. Has anyone seen this or have any ideas?

I am having a similar problem. I am evaluating Numbers 09 for the first time and would like to get rid of Excel, which seems incredibly slow to open. I'm ready for a change and I like the look and feel of Numbers.
I am working with an export file of data from FileMaker Pro - 3900 rows by 336 colums, so over 1.3 million potentially filled cells. My MacBook Pro has 2 gb of RAM and currently shows 185 free, 495 inactive, 557 wired, and 804 active.
When I try to open the txt file (8.3 mb), I get the error message referred to above. When I open it in Excel, it immediately opens. I can then save it as an Excel file. When I try to open this Excel file in Numbers, it will open but I get a message stating that only 255 or fewer columns are supported.
Could this possibly be right? Granted, who in their right mind would create a data table with that many columns, but when working with legacy data (which is why I have a job) this is often the case and it's my job to clean it up.
Any assistance in both of my errors would be appreciated . . . even if the advice is to stick with Excel

When trying to edit or download a pdf document, it becomes too large or on screen or normal size with many lines of text blacked out. How do I get it to do the normal presentation of the document

For years my pdf docs downloaded for viewing or editing as normally sized documents.
Now when I pull up a pdf from file, it becomes too large or becomes normal page size but many of the lines of text are blacked out. How do I correct it to go back to the previous default page size?

Hi wh4936,
Are you opening those files in Acrobat or Reader? You can set the default page size in the Page Display preferences. Choose Acrobat/Reader > Preferences in Mac OS, or Edit > Preferences in Windows to access the preference settings. Do the black lines only appear when the PDF is zoomed in? Or are they there regardless of the page magnification?
Best,
Sara

When I open a jpeg image at 100% is too large to see. How can I change the percentage to be able to view document?

When I open a jpeg image at 100% is too large to see. How can I change the percentage to be able to view document?
== This happened ==
Every time Firefox opened

You have to change the settings in whatever program you use to open the jpg. Firefox has no control over that. What program do you use to open jpg?

Cannot Convert PDF to Word because the "document is too large". What can I do?

I am trying to convert a document to word from PDF, but acrobat.com keeps returning a message that the 'document is too large'. What are some our options?

What's the size of the source doc? ExportPDF conversions are limited to 100 MB.
[topic moved to ExportPDF forum]

Subsequent debit in miro - Number of items in document is too large

Dear Experts
When i am doing subsequent debit in miro I am getting the eror "Number of items in document is too large" I have alreday posted invoice now i am doing subsequent debit .
Please do the need full
Regards
San

Hi,
check this blog:
( Restriction of Maximum 999 FI Document Items During MM transactions )
Restriction of Maximum 999 FI Document Items During MM transactions
Best regards.

Numbers-the document cant be imported because file too large

i have an exel file i am trying to work on and open but i keep getting this instead"the document cant be imported bcecause its too large"....how can i fix this its an urgent matter and i have to hand in a report

Hi Yarash,
I suspect the message is telling you that the Excel spreadsheet has more rows than Numbers's maximum pertable, 65,536.
Try splitting the Excel file into two smaller spreadsheets.
Regards,
Barry

Max Character File Size Limit exceeded.The document is too large to process

Hi
I have made set on section on products in report.
the Reports contains around 50 products when im opening the report
in draft mode the following error is displayed
"Max Character File Size Limit exceeded.The document is too large to be proceesed by the server .Contact your business Objects Administrator."
can some body help me out how to increase my report character file size

Hi,
If you are using Business Objects XIR2, there is a performance parameter in the Web_Intelligence Report Server where you can increase the size of that file. The parameter is Maximun Character File Size. Go to the CMC>Server>server.Web_IntelligenceReportServer in the Properties tab you will see it.
Cheers,
Luigi

Very large file 1.6 GB..sports program for school. lots of photos, template where media spots saved and dropped photos in..trying to get it to printer swho says its too large but when reduces size loses all quality...HELP??

Please help...large file my sons Athletic program. Had noto problem with Quality last year..this new printer said file is too large..too many layers, can I FLATTEN..He reduced size and photos look awful. It is 81 pages. Have to have complete before next friday!! Help anyone??

At that size it sounds like you have inserted lots of photos at too large a size and resolution.
Especially for a year book style project, first determine your image sizes and crop and fix the resolution to 300 dpi, then drag them into the publication. Pages does not use external references to files and rapidly grows to quite large size unless you trim and size your images before placement.
Peter

Sandbox WebPart Postback too Large?

Hi guys, I've done some research and it looks like the error I'm running into (when saving the web part properties) is that my post back is too large.
This is a simple sandbox web part I'm building, which works great until I added the last configuration option which put me over the limit.
Web Part Code (.cs)
using System;
using System.ComponentModel;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using Microsoft.SharePoint;
using Microsoft.SharePoint.WebControls;
namespace P.SPS.UI.Web_Parts.jQuery_UI_Accordion_Zone
[ToolboxItemAttribute(false)]
public class jQuery_UI_Accordion_Zone : WebPart
#region custom web part properties
[WebBrowsable(true),
Category("JQuery Options"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Include jQuery"),
WebDescription("Check to include reference to jQuery. * Google CDN")]
public bool includejQuery { get; set; }
[WebBrowsable(true),
Category("JQuery Options"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Include jQuery UI"),
WebDescription("Check to include reference to jQuery UI. * Google CDN")]
public bool includejQueryUI { get; set; }
[WebBrowsable(true),
Category("JQuery Options"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Include jQuery UI CSS"),
WebDescription("Check to include reference to jQuery UI CSS. * Google CDN")]
public bool includejQueryUICSS { get; set; }
[WebBrowsable(true),
Category("JQuery Options"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Include SPAccordions Script"),
WebDescription("Check to include the custom spaccordions() jQuery function.")]
public bool includeSPAccordionsScript { get; set; }
[WebBrowsable(true),
Category("JQuery Accordion() Properties"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Width (px)"),
WebDescription("If set a min and max width will be applied to the tab container. (integer)"),
DefaultValue(0)]
public int dataWidth { get; set; }
[WebBrowsable(true),
Category("JQuery Accordion() Properties"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Active"),
WebDescription("Which panel should be open? (integer)"),
DefaultValue(0)]
public int dataActive { get; set; }
[WebBrowsable(true),
Category("JQuery Accordion() Properties"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Scroll to Top on Activate"),
WebDescription("When set to true, the accordion will stay in view while switching headers.")]
public bool dataScrollToTop { get; set; }
[WebBrowsable(true),
Category("JQuery Accordion() Properties"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Collapsible"),
WebDescription("When set to true, the active panel can be closed.")]
public bool dataCollapsible { get; set; }
[WebBrowsable(true),
Category("JQuery Accordion() Properties"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Disabled"),
WebDescription("If set the accordion will be disabled.")]
public bool dataDisabled { get; set; }
[WebBrowsable(true),
Category("JQuery Accordion() Properties"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Event"),
WebDescription("The type of event that the headers should react to activate the panel. (event in quotations and comma seperated)")]
public string dataEvent { get; set; }
public enum dataHeightStyleOptions { auto, fill, content }
[WebBrowsable(true),
Category("JQuery Accordion() Properties"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Height Style"),
WebDescription("Controls the heigh of the accordion widget and each panel.")]
public dataHeightStyleOptions dataHeightStyle { get; set; }
#endregion
protected override void Render(HtmlTextWriter writer)
if (includejQuery)
writer.WriteLine("<script src=\"//ajax.googleapis.com/ajax/libs/jquery/1.11.0/jquery.min.js\"></script>");
if (includejQueryUI)
writer.WriteLine("<script src=\"//ajax.googleapis.com/ajax/libs/jqueryui/1.10.4/jquery-ui.min.js\"></script>");
if (includejQueryUICSS)
writer.WriteLine("<script language=\"javascript\">$('head').append('<link rel=\"stylesheet\" href=\"//ajax.googleapis.com/ajax/libs/jqueryui/1.10.4/themes/smoothness/jquery-ui.css\" />');</script>");
if (includeSPAccordionsScript)
writer.WriteLine("<script language=\"javascript\">$(document).ready(function(){if((document.getElementById(\"MSOLayout_InDesignMode\").value==1)?false:true){$(\".spaccordions\").spaccordions()}});(function(a){a.fn.spaccordions=function(){var e=a(this).data(),b={active:(e.active)?e.active:0,collapsible:(e.collapsible==1)?true:false,disabled:(e.disabled)?e.disabled:false,heightStyle:(e.heightstyle)?e.heightstyle:\"auto\",event:(e.event)?e.event:\"click\"};if(e.scrolltotop){b.activate=function(g,l){var k;if(l.newHeader.length==1){k=a(l.newHeader[0])}else{k=a(this).find(\".ui-accordion-header\").eq(0)}var i=a(window).height();var o=(a(window).scrollTop()==0)?a(\"#s4-workspace\").scrollTop():a(window).scrollTop();var h=k.height();var j=k.offset().top;var m=a(\"#s4-ribbonrow\").height();var n=j+o-m;console.log(\"elementScrollY \"+j);console.log(\"screenY \"+i);if(j>=m&&j<=i){}else{a(window).scrollTop(n);a(\"#s4-workspace\").scrollTop(n)}}}var f=a(this).parents(\"table\").eq(1);var d=a('<div class=\"accordion\">');if(e.width>0){d.width(e.width)}var c=a(\"\");a(this).parents(\"tr\").eq(1).remove();f.find(\".s4-wpTopTable\").each(function(h){var g=a(this).find(\" > tbody > tr > td\");c=c.add(\"<h3>\"+a(g[0]).find(\".ms-WPTitle\").text().trim()+\"</h3>\");c=c.add(\"<div>\"+a(g[1]).html()+\"</div>\")});d.append(c);f.before(d);f.hide();d.accordion(b);return this}})(jQuery);</script>");
writer.WriteBeginTag("div");
writer.WriteAttribute("class", "spaccordions");
// build custom jquery Accordion() options
if (!isEmptyorNull(Convert.ToString(dataWidth.ToString())))
writer.WriteAttribute("data-width", dataWidth.ToString());
if (!isEmptyorNull(Convert.ToString(dataActive)))
writer.WriteAttribute("data-active", dataActive.ToString());
if (!isEmptyorNull(Convert.ToString(dataCollapsible)))
writer.WriteAttribute("data-collapsible", Convert.ToString(dataCollapsible).ToLower());
if (!isEmptyorNull(dataDisabled.ToString()))
writer.WriteAttribute("data-disabled", dataDisabled.ToString());
if (!isEmptyorNull(dataEvent))
writer.WriteAttribute("data-event", dataEvent);
if (!isEmptyorNull(Convert.ToString(dataHeightStyle)))
writer.WriteAttribute("data-heightstyle", dataHeightStyle.ToString());
if (!isEmptyorNull(Convert.ToString(dataScrollToTop)))
writer.WriteAttribute("data-scrolltotop", Convert.ToString(dataScrollToTop).ToLower());
writer.Write(HtmlTextWriter.TagRightChar);
writer.WriteEndTag("div");
writer.WriteLine("<p>Use the web part properties menu to configure options for <a href=\"http://jqueryui.com/accordion/\" target=\"_blank\">jQuery UI Accordion</a>.</p>");
base.Render(writer);
protected void Page_Load(object sender, EventArgs e)
public bool isEmptyorNull(string value)
if (string.IsNullOrEmpty(value) || value == "0")
return true;
return false;
Now can anyone recommend how I could solve this issue? I'm not a back-end programmer :/.
Error after Post:
Web Part Error: Unhandled exception was thrown by the sandboxed code wrapper's Execute method in the partial trust app domain: An unexpected error has occurred.
Show Error Details
Debugger doesn't show anything so I know it wasn't reaching my code.

Hi,
What the last configuration option did you add?
Try to disable the ViewState of the .Net control in the web part.
Or
Add following into web.config(C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\ 14\UserCode) to avoid sandbox webpart error after post back.
<httpRuntime requestLengthDiskThreshold=”4096” /> (or set value as per your requirement)
Here is a blog for you to take a look at:
http://sohilmakwana.wordpress.com/2013/11/29/sandbox-error-unhandled-exception-was-thrown-by-the-sandboxed-code-wrappers-execute-method-in-the-partial-trust-app-domain/
If you want to achieve an Accordion web part, the following links for your reference:
http://altfo.wordpress.com/2013/06/18/jquery-accordion-based-announcement-web-part/
http://fitandfinish.ironworks.com/2010/02/how-to-create-an-accordion-web-part.html
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

XMLTRANSFORM Too large stylesheet - code buffer overflow issue

Hi All,
My question is related to MSWordML generation from PLSQL stored procedure.
1. I have table, containing XSLT stylesheets for different documents
2. PLSQL stored procedure is generating dynamic content depending on some params and at the end I'm using
SELECT XMLTRANSFORM(XMLTYPE.createxml(db_data_clob), XMLTYPE.createxml(x.xslt_clob)).GetClobVal()
INTO res
FROM msword_ml_data x
WHERE x.report_id = rep_id_variable;
where : x.xslt_clob -> column, containing XSLT CLOB
db_data_clob -> dynamic content CLOB
res -> CLOB result
All this was working fine on Oracle11gR1, but I had to reinstall database and I said why not install Oracle11gR2 ...
Guess what. Stored procedure is raising exception when using XMLTRANSFORM :
Exception : : ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00004: internal error "Too large stylesheet - code buffer overflow"
Google says nothing about it. I don't recall setting some special DB property in Oracle11gR1.
Has anyone encountered this ?
I haven't changed procedure nor table.
I'm using exactly the same XSLT's from Java code and they are working just fine, so they are not the reason. My guess is that something in Oracle11gR2 related to XML processing is changed.
If anyone could help, thanks in advance

For those who are interested.
I have logged a service request and it turned out that this is is a bug in Oracle 11gR2.
"The limitation on the style sheet is not exactly a size limit but a limitation on the number of style sheet instructions and depends on the way the style sheet has been written. This is a C based parser limitation"
Anyway, the workaround is to create Java stored procedure and do transformation from there.

Trx F-53, The difference is too large for clearing Message no. F5263

Hi,
I created a PO, then I posted the goods receipt, the invoice and I was trying to
post the payment by F-53 trx.
When I select an open item from the list and I try to simulate the posting by the menu (Document, simulate), system replies by:
"*The difference is too large for clearing
Message no. F5263*"
Cannot understand why it is not possible to post the outgoing payment
Regards

Dear Sappione,
did You check the tolerances?
Check in transaction OBY6 the indicator 'No forex rate diff. when
clearing in LC' is not set the amount is converted with the exchange
rate valid at clearing date, in case You're clearing in LC a foreign document.
When you post a clearing transaction with rounding
differences, those differences are posted to an additional line item
GL accounts. This account determination is customized as follows :
FBKP - Exchange rate differences -
Exchange rate difference in open items - KDF -a/c XXXXXXXXX
(Realized gain exchange rate difference)
The accounts used for rounding differences when clearing
are the realized gain/loss exchange rate accounts.
please check all the 3 suggestions.
Mauri

Saved documents Too Large

Similar Messages

Maybe you are looking for