Saved drafts do not load

When saving drafts, I cannot go back to work on them because they dont load. In addtion to that, I do not have an option to move them or send them only the option of deleting. I really need your help to figure it out since Those drafts are long and very important. Thank you

What sort of drafts? (Mail messages, Pages documents, etc.)

Similar Messages

Does Lion Mail send saved Drafts like Notes?

After saving an email as "Draft", I also received it in my Inbox. However, my Sent items box does not contain the email. Is this normal?

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.] It is 'appsolutely' safe!

Saved midi sounds not loading logic9

none of my midi sounds i save in a template gets saved. it defaults back to the first sound on my triton. when i click from one midi track to the next it defaults to the first sound. none of my sound are getting loaded.
what am i doing wrong..

So, here's an update to the problem, and to highlight, I decided to start fresh to demonstrate.
Okay, so, I created a new "concert" and only assigned one keyboard (Keyboard 1). The default sound was, of course, Suitcase Bright. When I select different sounds from 01 Pre-Mapped or 02 Software Instruments, everything seems normal. But, when I select different sounds from the 03 Electric Guitar, 04 Vocal, Audio Channel Strips, and Instrument Channel Strips patch libraries, the yellow Keyboard Layer disappears, and no sound plays like I described before.
So, for example, I went to Instrument Channel Strips > 10 Orchestral > 01 Woodwinds > Bassoon Legato. The Keyboard Layer disappears and there's no sound. Here is where the problem is: Upon further inspection(based on your steps), I went to MIDI Input within the Channel Strip and I discovered that it's automatically creating a new keyboard input (Keyboard 2) which I never created and it just doesn't exist in real life. That's why the Keyboard Layers are disappearing and no sound is coming out; it's trying to automatically move it over to a keyboard that's just not there.
Again, this only happens when selecting sounds from within the 03 Electric Guitar, 04 Vocal, Audio Channel Strips, and Instrument Channel Strips patch libraries. When I select a sound from 01 Pre-Mapped or 02 Software Instruments, the Keyboard Layers reappear and everything goes back to normal.
So, I'm not sure how to fix this ...

Why are my saved bookmarks randomly not loading on startup even if I have saved them earlier?

Whenever I exit the firefox, I am asked if I want to save the current bookmarks so they will be loaded automatically next time I use the internet. Lately, they haven't been loading automatically even though my laptop is not crashing.

Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session. 
Use "File > Exit" or "Firefox > Exit" (Mac: "Firefox > Quit Firefox") if you want to restore multiple windows. 
You can use "History > Restore Previous Session" to get the previous session at any time. 
You may need to click the orange/gray Firefox button to see History. 
There is also a "Restore Previous Session" button on the default about:home Home page. 
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox/Tools > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"
Make sure that you do not use [[Clear Recent History]] to clear the 'Browsing History' when you close Firefox.
* [[Firefox does not ask to save tabs and windows on exit]]

Saved files will not load Premiere Elements 8

I have a Sony Vaio laptop I purchased in 2011, running Windows 7. Preinstalled on the computer was Premiere Elements 8 so I have been editing a video I recorded using this software, December 31, 2014 was the last time I edited the video until yesterday. Yesterday I booted up my computer, started Adobe Premiere Elements 8, Opened my project, watched as the loading meter went to 100%, the loading meter went off and nothing...I was looking at the Premiere Elements 8 screen with nothing, just a grey background with all my headings at the top like I had not opened a project, I have tried this many times with the same results

Randy_Q
Thanks for the update. Sorry the solution was not found yet.
I do not see an avenue from Adobe for a fresh download since this was a pre-install from a computer manufacturer. You might be able to get the serial number for this pre-install. If this version got registered at Adobe somehow, there might be a listing for it under "My Products" after you sign into Adobe web site (http://www.adobe.com) with your Adobe ID and Password. Type in My Products in the Search field and follow it to your products. If you see Adobe Premiere Elements 8.0 listed, click on that to reveal the serial number.
But still no replacement installation files.
Let us recap
1. Adobe Premiere Elements Prefs file and 8.0 Folder deleted
2. You have been through my check list in post numbered 3.
3. You have done general computer maintenance.
4. Can you get into Elements Organizer 9? If so, please go to Edit Menu/Preferences/AutoAnalzyer Options and disable everything under AutoAnalzyer Options.
Did that impact the issue in anyway?
5. We cannot uninstall reinstall or create a new User Account with Administrative Privileges since we do not have access to installation files and probably serial number.
Are we at a stage when System Restore to about December 31, 2014 becomes an option? Or rolling back the Windows Updates to December 32, 2014?
You have ruled out that the problem exists with or without the antivirus and firewall(s) disabled. Is that correct?
ATR

Saved Monitor Profile Not Loading In Windows XP

I normally use a Mac for PS, but I have Adobe Gamma installed as Control Panel on my Windows XP machine, so I can correct the monitor balance.
After I run the Wizard, I save a new sRGB Color Space Profile.icm in Windows\System32\spool\drivers\color.
But every time I restart Windows, it resets itself, and my monitor balance is off - much too light.
What gives?
How do you get Windows XP to load this profile each time?
Thanks.

check the display settings. your video driver could be overriding adobe gamma with it's own color profile.
start> settings> control panel> display> settings> advanced> color management.

I recently saved a draft email using mail, but now whenever I try to reopen it, it says loading but will not load. All my other drafts load fine except for this one. Is there a way to access the draft outside of mail?

I recently saved a draft email using mail, but now whenever I try to reopen it, it says loading but will not load. All my other drafts load fine except for this one. Is there a way to access the draft outside of mail?

Create a new profile as a test to check if your current profile is causing the problems. 
See '''Creating a profile''':
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem 
'''Profile Backup and Restore'''
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Images are not loading when composing and saving to drafts

When I compose and add images and save to drafts. They are not loading to my drafts folder. It is just an empty square.

I cannot see the images in Thunderbird after I save the draft. When I send the draft to myself in Thunderbird there is no image. I can see the image in Gmail and in the MacMail.

Flash Pro CC saved fla project - "Could not load scene into memory. Your document may be damaged."

Hi all, I've been working on a project in Flash Professional CC in windows 7 that was started in a previous version of Flash Pro and occasionally after I've saved the project and tried to open it the next day I get the "Could not load scene into memory. Your document may be damaged." message and only a blank Scene 2 in the project. I've previously been reverting back to the old saved project file and starting over. Its wasted a lot of time so far.
I can still open the same exact project in CS6 on another older computer but not in CC. I can also save the fla in CS6, transfer it to the other computer and then it will work again (for now). This isn't going to be an option in the future as CS6 was a trial version that is on its last use today.
I've tried to create a new flash pro cc project and just copied and pasted the library and scene layout from the old project into the new project. This worked for a couple of saves/ opens but the error has happened again. I'm scared that now that I've reached the point in the project were my work in the animation/ visual side will start to be more intensive that I will continuosly have to worry about losing all of my work. I'm using a document class so the AS3 code hasn't been an issue thankfully. Any help would be appreciated.

Thanks for the reply Amy, that is essentially what I am doing already only I'm not using version control software I'm just managing it on my own since its a solo project, though I have been considerring using git anyway. It still doesn't explain why I can open and save the supposedly damaged project (according to CC) in CS6 and only then will it work again in CC. Also I'm not gettting a chance to save as a new version over and over for long. Its only a couple of days max, usually just over one day, and I've primarily been working on the code in Flash Builder with little functional change in the actual fla project. Its primarily changing movieclips instance names, which in this project is tedious and time consuming. Having to revert back to the older working version is exaclty what I'm trying to avoid. I shouldn't have to commit the project to a repository every little change that I make to the fla file.

Saved userid passwords will not load on yahoo after clicking form on sign on page firefox 24

When I go to Yahoo Mail I usually can just click the User ID area and the ID and Password information will load as Firefox has that information already saved. That function has stopped with the update to Firefox 24. The user ID and Password information are still saved in FireFox.
What does happen is that if I go to tools/Options/ Security menu and then close it and then try to load the Yahoo mail and click the form it does the auto complete. If I navigate away from that page and go back the information will not load unless I open the Options menu again.
This update seems to have broken the auto complete function.

Oh... and here is another work around. Click in the Used Id field then Click in the Password field then click the User Id field again. That brings up my Id s.

My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.     Can not load the Organizer from the icon at the bottom

My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.
Can not load the Organizer from the icon at the bottom of Editor screen, from the icon on the MacBook Air dock (OS 10.10.2), nor from the file in applications located with Finder.
I have tried without success to access Organizer after turning off and on the scanner, turning off and on the computer, loading a fresh copy of PSE12 from the CD, and restoring default preferences. I have searched on line for other options but not found any.
Can you help me?

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Counters not loading from saved PerfMon html settings file in IE

The Settings html file is hosted on our internal trusted web server, the perfmon interface loads but no counters load.
If I right click and go properties there are no counters configured. If I add a counter that works, but upon reloading the page the counters do not load from the HTML source file.
I check the source of the HTML, and the counters are there, but aren't loading.

if you open the file from a local drive it does work, but I cant get it to work from a network folder.

Firefox does not load last saved urls

Dear support team,
I have to open 5 fix urls daily for 12 hours. The new fixfox does not load last opened urls when i came at work next day while previous version was doing same thing for me since months. Please advise.
Kind regards
Aziz A. Khan

Create a new profile as a test to check if your current profile is causing the problems.
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 10.0 r22
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

Adobe flash will not load - gives only a black screen

For all the (3) users on this computer.   For most browsers (Safari, Chrome, Firefox) The browser window goes 100% BLACK when a flash program link is opened and most of the time the cursor / Pointer freezes (occasionally disappears and all keyboard actions are blocked. Have to force quit or kill the box with the power key (which always bothers me.) No Adobe links work directly via the link in mail or in browser. Symptom in Mail is either the original window goes BLACK or a separate window opens in Black.
Current OS X 10.9.3 (13D65), Memory 4GB on 2.4 GHz Intel core i7 in MacBook Pro 15" Late 2011.
Relevant?? Items:
1.     The Adobe company checking device says Flash is not loaded. I have had flash 9, 10, 11, 12, & 13 working before the latest of   OS X upgrades were made.
2.     An aside, I recently (4 months ago) used a MacKeeper app. Today (not used except for information gathering) the "System Scan says my ProtectMac anti-virus is active and no security problems noted. Also noted was "Serious" issue relating to one of 128 issues (474.3 MB of 'junk' files-36.9 MB in 'Logs", 437.4 MB in Caches.) "Performance" listed as 'Fast.' No action is taken and System Scan app closed.
3.     I seem to have lost my copy of Flash 13 in the Applications folder and the install file tries to load "AdobeFlashPlayerInstaller_14_ltrosxd_aaa_aih.dmg"
This makes sense as to item 1. above.
4.      Another user loaded adobe flash 11 from a download file called, "AdobeFlashPlayerInstaller_11au_ltrosxd_aaa_aih.dmg." I do not understand the meaning of the part of the file name that reads "_11au_" as it seem to differ from other downloads for "_11eu_". Additionally the copy retained is filed in history and had only the user permissions of one user. Also that copy _11au_ has no mention of Browser Type in the name description of the .dmg file; but the "_11eu_" does mention Safari browser.   Since it was from July 8, 2013 I assume it doesn't matter and it should have been superseded by Flash 12 OSX. Mentioned here only for interest. Also, It may have been saved on this computer in case of rebuild for another user on the home network running 13" MacBook Pro 10.6 Leopard.
5. Attempts to reload Flash 13 from 'AdobeFlashPlayerInstaller_13au_ltrosxd_aaa_aih.dmg' as the "Adobe Flash Player Installer" connects to the latest version not yet installed and keeps downloading the Flash 14, which fails and locks up the browser.
6.     The download from get,Adobe.com starts out O.K. After the installer file.dmg completes well, Step 2. is to open it, that, too, works well with an open window of a mounted device on the desktop. The next step is to double-click the icon. That only works so far. A window opens and it has a progress thermometer but it never downloads any product and the link is declared "unavailable" immediately. Refuses to load and will not always give the pointer back or let the browser continue.
7.     While creating this 'Summary' something changed. Using Spotlight I found a different version of Flash Installer on my Mac. I clicked it to go to the Black screen after installer download competes and got a totally different response. I was set to take snapshots of the windows as they progressed. The ".dmg" Icon on the desktop changed from default plain white disk to the red "Flash Player" I had not seen for last 40 days.
Pic 1.     Pic 2.
Pic 1. is the desktop device icon.
Pic 2. is the Installer.
Pic 3. is the Acceptance popup. ~~Note: This popup shows a backwards rev dated March 4, 2012! today is 10 July, 2014.
Flash Player 11.6 is installing after acceptance of License.
Everything went normally and loaded but I cannot test it as all browsers were closed.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

IOS8 on iPhone 5: Apps not Loading; Frequent Crashing

Hey All,
I've never posted on the support forum before, because I rarely have issues with my apple products. I recently downloaded the iOS8 upgrade onto my iPhone 5 and have been having severe issues with the functionality of my phone:
1) Apps will not load - some of my apps, such as mail, facebook, snapchat, twitter, mapmyrun, and so forth, will "open," but none of the content loads. Occasionally, the apps will appear to load further, the more I try, but then crash once they get to a certain point. I reuploaded my back up data, hoping that the transition to the upgrade might have damaged my files. That has not worked.
2) Crashing Apps: They will occur without notice or in the middle of discussion. My facetime has vanished mid-conversation. My texts won't go through.
3) Wi-Fi disappears - there have been times when I'll get the "your app will work more accurately if you enable internet," which is bizarre because I am always connected over 3G and/or wi-fi. I often have to manually go back into my wi-fi settings and log back in, which never used to happen in iOS7 for saved networks.
Generally, the iOS8 is just slow. Even swiping pages is stalled. Scrolling on Safari freezes quite often (and not on pages where there is flash media or a lot of graphics, but basic text, like Wikipedia).
I'm just really frustrated that my phone (which I upgraded to this year), seems to be incompatible with the latest iOS update.
Is there a patch or new version slated to address any of these issues?
Let me know at your soonest convenience.

Well, after updating to iOS 8 every app needs to re-ask for your permission in every since. You should have to go back into every app and click enable or disable for location services / notifications / requesting of photos. Is it a persisting issue (i.e. every time you open one app, it repeatedly asks you to enable that service)?

Saved drafts do not load

Similar Messages

Maybe you are looking for