Saved images disconnected in Organizer

I have been using Elements 9 for more than a year. Today it started doing something crazy. When I edit a photo (did this using "guided edit"), instead of saving the edited version (in a version set), all I get is a grey screen with an hour glass. When I go to my hard drive, I find both the original and the edited version saved, but it no longer shows up in Organizer. To my knowledge, I did not change anything. Any Suggestions?
Message title was edited by: Brett N

If you are on Windows platform, goto the location : %programdata%\/Adobe/Elements Organizer/Catalogs and double click the folder whose name is same as your catalog. On MAC the location you go to would be : ~/library\Application Support\Adobe\Elements Organizer\Catalogs
Now there must be a file with name thumbs.cache. Simply rename it.
Launch Organizer and see if thumbnailing happens now for your catalog. If not, run the following two commands-
File >> Manage Catalogs >> Select your catalog >> Optimize
File >> Manage Catalogs >> Select your catalog >> Repair

Similar Messages

Saving Images In Organizer

Help?? I saved all my images to a cd and to my organizer in JPeg format. Unfortunately, the cd showed blank a few days later and I'm unable to view the images in my organizer. They appear as a blank box with a question mark in it. Am I supposed to change the format to view them? I hope they're not lost! Thanks, Kristi

Just to follow up on your response to Summit; where were the photos stored when you copied them to the CD? Or did you move them?
If they were on your C drive (Assuming a windows system) they will still be there if the command was copy rather than move.
Try looking using Windows Explorer for instance.
I truly hope you can recover them.

Black images in PSE9 organizer?

I recently scanned some old B&W prints to TIFF files but they only show as black images in PSE9 organizer although they appear normally in the editor. Files that don't appear are all less than 1Mb file size. Any suggestions about how to have these images appear properly in the organizer would be appreciated. Thanks in advance

Here are the release notes for PSE9:
http://kb2.adobe.com/cps/861/cpsid_86152.html#main_Photoshop Elements Organizer notes
Specifically, this section (emphasis added):
Organizer thumbnails:
If an image has been rotated in an application other than Photoshop Elements 9, update the thumbnail before printing or using the image in a creation to ensure that the images appear properly rotated. To update the thumbnail, select the image(s) and choose Update Thumbnail or Update Thumbnail for Selected Items in the Edit menu.
Some TIFF files and files that use uncommon color profiles may appear black or as generic thumbnails in the Organizer. To fix this, select the file, and choose File Export As New File(s). This will save the file with the supported set of file tags required by the Organizer to show the thumbnails.
Very large files appear with generic thumbnails. For example, panoramas created with Photomerge Panorama return multiple layers, which, when saved, creates very large files. To make thumbnails visible in the Organizer, consider saving panorama files as flattened JPEG images
Files that are not supported in the Organizer look like broken thumbnail icons. You can import these files by saving an album containing a file in an unsupported format, using the Photoshop Elements Editor, or importing files not supported by the Organizer, using Premiere Elements.
Ken

Saving images takes much longer now?

About six weeks ago, saving images started to take much longer than they used to
. Elements 11.

I have been doing all kinds of editing - it doesn't seem to make much difference what or if I save as JPEG or TIFF. I am using Windows 7. I am saving to the original folder. I have saved and closwed these files from the Editor. The Organizer freezes and I just have to wait to do anything else?
Thanks

"error while saving image"

has anyone had the problem where, when they select option and tap an image (in my case i pulled one from my email using an image i uploaded from my drive) and gotten an error that says "there was an error saving image" and your only option is 'ok'? i've read other forums and understand that jpeg's are the ideal form, and this had a .jpg extension.
any thougths anyone?
so many thanks in advance.
-wren
Post relates to: Pixi Plus p121vzw (Verizon)

hey thanks , but my jdbc pool and driver is fine. what may be the problem and I am not able to change the type to BlobDomain in eo. The type i Blob only may be this is the problem how can I change it to Blob Domain

Saving images from camera raw in new CC suite

Hi Im having trouble re saving images from new adobe cc bridge camera raw, images once saved then show in bridge with no adjustments done in camera raw and the images are downsized to KB size images even from a 9.20mb raw image, Ive looked at setting or rather preferences and totally lost please help!!
Thank you
Jon

This forum is actually about the Cloud, not about using individual programs
Once your program downloads and installs with no errors, you need the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/bridge

Saving image to a folder not working on azure

I am saving image
files to a folder in my application and saving its path in database . Image uploads working fine when I am running locally
and its path is also storing.When I deployed it on azure it
gives an error that " An error occurred while processing your request ". I have two tables in my database . First one where text is saved is working fine on azure but image upload thrown this error.
I am using this code
to upload
image and its works fine when I am running locally. Need help ?

Hi,
Have you made any progress ?
May I ask what application is it that you are running ? You mentioned that it works locally but not when deploying to Azure. Have you checked the connections strings?
If you are still having any difficulty in understanding the code, perhaps you could post it on the below blog.
http://blogs.msdn.com/b/onecode/archive/2014/08/28/sample-of-aug-28-how-to-store-the-images-in-sql-azure.aspx
Regards,
Mekh.

Data type for Saving Image in SQL database

Hi,
Which is the best way for saving images in the database? Filestream or Varbinary(max)?. Will the Varbinary max comsume much space or it will only take the actual size of the data?

I've used FILETABLE for storing images in SQL 2012
You can configure it to have transact and non transact access if you want
see
http://visakhm.blogspot.in/2012/07/working-with-filetables-in-sql-2012.html
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

How do I stop Firefox from grabbing my saved images and coverting them to Firefox?

I am working on images in Dreamweaver and Adobe Photoshop, and when I try to save them, Firefox coverts them into Firefox images with a Firefox icon and then I can't edit them properly in Photoshop or Dreamweaver. How do I stop Firefox from grabbing my saved images? in English

I will try that, but it's pretty time consuming to have to check that for each of my images. I am a web designer and I work with a lot of images.
Is there any way to set that globally for all of my saved images?

Saving image using mobile into sap R/3

We are using sap mobile platform version 2.3 and our client requirement is to save images using mobile apps.
We already saved images in mime repository but for this we have to required client modifiable , but due to security reason we can't do this.
Please Help.

Hi Nilesh ,
I had a scenario to attach image to pr05 transaction from mobile, so that when click view attachment button in pr05 i can see the image . My code is based on that .
it is the function module with import parameter base64 string and filename ,last three letters of the file name proceeding the . is the extension
in your case you need to create custom object type instead of BUS2089 .
Do research regarding that ..
-->Local Workare declaration.
   DATA : ls_fol_id   TYPE soodk,
          ls_obj_id   TYPE soodk,
          ls_obj_data TYPE sood1,
          ls_content TYPE soli,
          ls_folmem_k TYPE sofmk,
          ls_note     TYPE borident,
          ls_object   TYPE borident.
**--> Local internal table declaration.
   DATA : lt_content   TYPE STANDARD TABLE OF soli,
          lt_url_tab   TYPE STANDARD TABLE OF so_url,
          lt_objhead   TYPE STANDARD TABLE OF soli.
**--> Local variable declaration.
   DATA : lv_filename            TYPE string,
          lv_file_name_with_path TYPE chkfile,
          lv_stripped_name       TYPE string,
          lv_name                TYPE char30,
          lv_url_tab_size        TYPE sytabix,
          lv_ep_note             TYPE borident-objkey.
   ls_object-objtype = 'BUS2089'.
   ls_object-objkey = '001095510000020022'.
   ls_obj_data-objdes = I_FILE_NAME.
   ls_obj_data-file_ext = I_FILE_EXT.
   CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
     EXPORTING
       buffer     = I_FILE
     TABLES
       binary_tab = lt_content.
   CALL FUNCTION 'SO_CONVERT_CONTENTS_BIN'
     EXPORTING
       it_contents_bin = lt_content[]
     IMPORTING
       et_contents_bin = lt_content[].
**--> Getting folder ID to save data
   CALL FUNCTION 'SO_FOLDER_ROOT_ID_GET'
     EXPORTING
       region                = 'B'
     IMPORTING
       folder_id             = ls_fol_id
     EXCEPTIONS
       communication_failure = 1
       owner_not_exist       = 2
       system_failure        = 3
       x_error               = 4
       OTHERS                = 5.
   IF sy-subrc = 0.
     ls_obj_data-objsns = 'O'.
     ls_obj_data-objla = sy-langu.
     ls_obj_data-objlen = LINES( lt_content ) * 255.
     CLEAR ls_content.
     CONCATENATE '&SO_FILENAME=' I_FILE_NAME '.' I_FILE_EXT INTO ls_content.
     APPEND ls_content TO lt_objhead.
**-->To Create an Object and Move to a Folder
     CALL FUNCTION 'SO_OBJECT_INSERT'
       EXPORTING
         folder_id                  = ls_fol_id
         object_hd_change           = ls_obj_data
         object_type                = 'EXT'
       IMPORTING
         object_id                  = ls_obj_id
       TABLES
         objcont                    = lt_content
         objhead                    = lt_objhead
       EXCEPTIONS
         active_user_not_exist      = 1
         communication_failure      = 2
         component_not_available    = 3
         dl_name_exist              = 4
         folder_not_exist           = 5
         folder_no_authorization    = 6
         object_type_not_exist      = 7
         operation_no_authorization = 8
         owner_not_exist            = 9
         parameter_error            = 10
         substitute_not_active      = 11
         substitute_not_defined     = 12
         system_failure             = 13
         x_error                    = 14
         OTHERS                     = 15.
     IF sy-subrc = 0 AND ls_object-objkey IS NOT INITIAL.
*            COMMIT WORK AND WAIT.
       ls_folmem_k-foltp = ls_fol_id-objtp.
       ls_folmem_k-folyr = ls_fol_id-objyr.
       ls_folmem_k-folno = ls_fol_id-objno.
       ls_folmem_k-doctp = ls_obj_id-objtp.
       ls_folmem_k-docyr = ls_obj_id-objyr.
       ls_folmem_k-docno = ls_obj_id-objno.
       lv_ep_note = ls_folmem_k.
       ls_note-objtype = 'MESSAGE'.
       ls_note-objkey = lv_ep_note.
**-->Link the object ID to trip No.
       CALL FUNCTION 'BINARY_RELATION_CREATE_COMMIT'
         EXPORTING
           obj_rolea      = ls_object
           obj_roleb      = ls_note
           relationtype   = 'ATTA'
         EXCEPTIONS
           no_model       = 1
           internal_error = 2
           unknown        = 3
           OTHERS         = 4.
       IF sy-subrc = 0.
*            COMMIT WORK AND WAIT.
       ENDIF.
     ENDIF.   " SO_OBJECT_INSERT
   ENDIF.       " SO_FOLDER_ROOT_ID_GET
ENDFUNCTION.

Why do the file extensions (.jpg .gif .png) no longer appear when I click on a previously saved image to use that image's file name (particularly important when saving a series of images using the same root name)?

I save a lot of images using firefox, often times from a large batch or series of images. It used to be that I would click on a previously saved image and the entire file name including the file extension (i.e. image_example.jpg) would appear in the "save as" line. Now when I click on a previously saved file, the file name appears without the file extension (i.e. image_example). Which means I have to manually type .jpg every time. For a large collection of images that I am hoping to use the same root file name and then add chronological numbers at the end, this has become incredibly frustrating, especially as it is a previously unnecessary task.
I am using a new Macbook Pro and maybe there's something Apple related to this...? It did not happen on my old PowerBook G4. I have file extensions turned on in System Preferences.
It should be noted that I have searched high and low and have even gone into the Apple Genius Bar where they were just confused as I was and of course ended by urging me to use Safari (shocker!) as it has all kinds of new extensions and bells and whistles. I seriously feel alone on an island with this dumb, hard to google problem. Thanks so much for any help anyone out there might have.
I mean: is this as simple as changing a setting in about:config?
Your assistance is greatly appreciated.

Thanks for your response Mylenium, however like I mentioned multiple times, I did change all of my trackpad/scrolling settings in system preferences. And if I wanted to use a normal mouse (or a tablet), I would've gotten an iMac instead of a MacBook Pro. I travel often and work all over the place, not always with access to a decently sized workspace that would be required for using a mouse or tablet.

Saving image in ms sql database.

Hi all, i have a problem saving image in the database.i used
request.getParameter("imagename"), to get the content of the textfield in the html file but the problem is that it omits the filepath and gives me just the image name and that gives me an error.. Pls help me

Your actual problem is less or more web browser related. The right way is that the browser should only send the filename, but a certain widely used browser developed by a team in Redmond would send the full file path as it is at the client side, which is completely wrong.
The bigger picture what you're trying to achieve, uploading a file from the client to the server, shouldn't be done that way, simply because this isn't going to work at all if the client runs at a completely different machine on the other side of the network than where the server runs. You need to send the actual file contents to the server. Just set the form's enctype to multipart/form-data and parse the body of the request to get the actual file contents. To ease the work I recommend you to use Apache Commons FileUpload API for parsing the multipart/form-data request. Go to their homepage and check out the 'User guide' and 'Frequently Asked Questions' how to use it and for some tricks.

Saved image displays differently outside Photoshop

When I save an image I've been working on in Photoshop, then open the saved file outside Photoshop, the image looks quite different than it does inside Photoshop, much drabber and less saturated. I have both Photoshop and the display program set to sRGB. I figure that I should have consistency within the monitor, whether it's calibrated or not. I'm sure I'm missing something basic here. I'd appreciate any help here, because my prints wind up drab, too. Many thanks!

LBJack wrote:
I overlooked one switch in the Save dialog. Now the images display correctly.
Can you be more specific, please?
Were you saving images without a color profile before, and some application(s) in your system were displaying them improperly?
Problem is, in that case one wouldn't really expect to see the kind of difference you describe unless your document profile really wasn't sRGB IEC61966-2.1.
Is it possible you're editing your images in the Adobe RGB 1998 color space? That could happen if you're opening images through Camera Raw, as the color space it's set to deliver is configured separately (via the link at the bottom-center of the Camera Raw dialog) from the Photoshop defaults.
By the way, if you don't already know, you can easily set the status block in the lower-left of the Photoshop window to show you the color space of your current document:
-Noel

I have problems with uploading images to my printing company have the images have been manipulated through CS6 i have saved images as jpeg but the printer company tell me they are not j peg, they will not upload images save from a camera are fine

I have problems with uploading images to my internet printing company when the images have been manipulated through CS6 and i have saved images as jpeg the printer company tell me they are not j peg,
but images saved from my phone or camera images that have not been manipulated upload fine, What am i doing wrong?

Save/Export them as JPG. Photoshop defaults to PSD, so make sure you select JPG and not just rename the file to .jpg.
There are two ways to save them as JPG: Regular Save as option or Save for Web & Devices
Take your pick.

I have multiple images in my organizer that i do not want

I have multiple duplicates of images in my organizer , how can i get rid of them , how can i prevent thsi from happening in the future???

To search for duplicates :
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Find_and_delete
Avoiding duplicates:
Only you can tell the reasons, but a few questions might help:
- how do you import your pictures in the catalog : via the downloader, from camera, from card reader ?
- Do you use 'watched folders' ?
- Do you use face recognition ?
- Do you frequently export files for different projects ?
- Do you work with other external softwares such as video or slideshow editors ?
- If you work with the downloader, did you check the option to ignore already imported files ?
- Do the duplicates have the same file name in different folders, or slightly different names in the same folder ?
- Are the duplicate the same size or is one of them of very different size ?
Can you compare duplicates to see in which folder they are ? That might give you a hint about how they were produced ?
Also, which PSE and OS version ?

Saved images disconnected in Organizer

Similar Messages

Maybe you are looking for