Saved Over a Document, PLEASE HELP!

I accidentally saved over an important document. Is there any way to go back to a previous version of the document? I have a MacBook Pro from 2009, iOS X 10.6.8 and am using the program Pages.

If it’s in a backup, restore it from there. If not, try using a data recovery product such as the ones listed here. Don't write anything else to the drive until the file is recovered or you choose not to recover it.
(116771)

Similar Messages

Been stuck for over a year, please help me do this

so i have this laptop with 8gb ram and core i7 as well as 2 hdd (no raid).
Now i heard about premiere (cs4) and my laptop is ready to take most of the advantage but the hard drive is the bootleneck.
Basically, all i want is to do few cuts in a video that was filmed by sony hdr-sr11 camcoder in hd 1080 60i settings. Now i heard i need 3 hard drives etc, but at the moment, i only have 2.
So is there anyway i can do simple cuts in premiere without losing any quality and slowdown in fps or is there any other software that can be better? I really don't want to lose any quality or fps with the g73jh-a2 asus laptop i have?
i also have ati 5870 video card

The lowest was 19mb, but was floating arond 30mb. Still that aint good..
I can't afford the partition magic and i heard its not good to partition after installing windows. I am thinking of fresh install, but if there is a workaround, it would save me tons of time as not installing apps etc.
For the setup
1)Can i have the programs in secondary drive? What about just a game or 2?
2)By projects, do you mean the videos that im going to edit?
3)what is scratch?
4) By media, do you mean videos im going to edit?
Lastly, what about a bit of data? Like <50gb.. Pictures documents etc
Like, truly anonymous
Date: Fri, 30 Apr 2010 17:16:10 -0600
From: [email protected]
To: [email protected]
Subject: been stuck for over a year, please help me do this
i did hdtune and was the os drive was 100mb-19mb in the end and the
secondary one was 105-45~mbps
Those figures are disturbing. For any reasonably modern 7200 RPM disk these figures should be around 120 - 60 MB/s. If it goes down to below 20, something is seriously wrong. Now that may be caused by your partitioning or something else, hard to discern from here, but these results are worrisome.
Maybe Partition Magic can help you get rid of all these partitions, otherwise a complete reformat and fresh install of OS & programs is all that is left.
Setup should be something like this:
C: OS & programs & projects
D: Pagefile, scratch and media
It depends a bit on the nature of your projects, your workflow, but in general you set up your disks in such a way that disk accesses are spread over the available disks as much as possible.
>

Saved over a Document

Help! I inadvertanly saved over a document. Is there anything I can do?

If anyone is reading this before they have erased anything, make sure, to avoid this happenening to them, to go to the Microsoft Word preferences and select the Save preferences. For goodness sake, check the Allows Create Backup box. This will create a backup file of your document as it was since the last save. That would have helped me a ton as I erased everything and then saved... Would have kept my whole completed paper as a backup! Thanks for all your help!!

I am trying to split a document please help?

I am trying to split a document please help?

Easy with Acrobat, but not possible with Adobe Reader.

I am using adobe photoshop cs6. I am facing a problem. When i save any image as "save for web". After saving image it show cropped. An image show many parts of the image after saving the image. Please help me. Thanks in advance.

I am using adobe photoshop cs6. I am facing a problem. When i save any image as "save for web". After saving image it show cropped. An image show many parts of the image after saving the image. Please help me. Thanks in advance.

Just go back in photoshop and use the Slice Select tool, then just click and select the slice and hit delete - if you're not sure which one is the active slice just right click and find the one that has the Delete Slice option.
It's possible you either added the slices by accident or if you received it from someone they just had the slices hidden. For the future, you can go to View > Show > Slices to display (or hide) slices.

Error message:" Couldn't complete the command because the scratch disks are full" Ive try to fix this many times following different steps but none of them work and my disks equal to over 250GB. Please help.

. This error message pops up in Photoshop when i just wanna create a new plain white template. I have downloaded agentransack to track down the temp files and for some reason it says nothing matches the temp files.I have a couple of drives including 2 SSD's. I've try to fix this many times following different steps but none of them work and my disks equal to over 250GB. Please help. ( I am running windows 7 proffesional) 64 bit

Good day!
my disks equal to over 250GB.
What’s relevant is the space on the disk/s you have assigned as Scratch Disks – what are they (Phortoshop > Preferences > Performance > Scratch Disks)?
Regards,
Pfaffenbichler

My 2nd generation Airport Extreme very slow via wireless (5 and belows mbps) wired over 20. Please help!

My 2nd generation Airport Extreme very slow via wireless (5 and belows mbps) wired over 20. Please help! What could it be?

It is very possible that you may have some form of Wi-Fi interference nearby that is preventing your AEBSn from providing a clean RF signal on the 2.4 GHz band.
I suggest you perform a simple site survey, using utilities like iStumbler, or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible.

I am transmitting data over internet and WiFi ,it's working fine with internet but when I choose WiFi for data transmission data is not being transmitted. What may be the possible issues of data transmission failure over WiFi? Please help me.

I am transmitting data over internet and WiFi ,it's working fine with Internet but when I choose WiFi for data transmission data is not being transmitted. What may be the possible issues of data transmission failure over WiFi? Please help me....
Thanks in Advance.
Neeraj@iDev

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

When i switch on my macbook its icon first appears smallers then gets bigger and the place where we enter the password.......that page looks like over zoomed. Please help tell what to do????

when i switch on my macbook its icon first appears smallers then gets bigger and the place where we enter the password.......that page looks like over zoomed. Please help tell what to do????

Reset PRAM. http://support.apple.com/kb/PH18761

Accidentally saved over a document - can anyone help?

The situation is this. I was typing in a long document (Microsoft Word) on my computer running Mac OS X 10.4.11. Somehow I must have selected the entire text of the file (40 pages) and hit the enter key because suddenly I looked at it and there was no text left.
Instead of hitting command-Z (what I should have done), I clicked to close the file, figuring it would ask me to save changes and I would choose "no" and revert to the saved version. Well, it must have autosaved the blank file, because it didn't ask me if I wanted to save changes, and when I reopened the file, you guessed it... still blank!
I remember from years ago when I had a PC that each time you saved a Word document, the computer saved a hidden version of the file, so you ended up with several dozen temporary files that you could find until you restarted the program or restarted your computer. Does my Mac have anything like that?
I just went in and changed my Microsoft Word options to automatically save a backup version... wish I had known about that option sooner! Any other suggestions? Help!!

Try using an application such as [Data Rescue II|http://www.prosofteng.com/products/data_rescue.php] or [FileSalvage|http://subrosasoft.com/OSXSoftware/index.php?mainpage=product_info&productsid=1]. Both have free trial versions that let you see if the software will help before you decide to buy.
It is critical that you do not use the computer or even turn it on until you have rescued your files. Files only have the directory reference to them removed when you empty the trash and are still present on the computer. However, their space is marked as available to any other file creation done on the computer (even done by you booting the computer) and there is risk that your files will be overwritten by the computer.
There is also this free tool which supposedly runs on OSX and does recovery of popular media and Office files. http://www.cgsecurity.org/wiki/TestDisk_Download I know almost nothing about it and maybe it only runs on Intel machines.

Problem in Billing Document-Please help!

Dear Experts,
I have CIN configured in my pricing procedure and I am doing the complete sales process Order>>Delivery>>Billing
At the time when I am saving my billing document system is showing a pop up message
u201CPrint excise invoice in series grp XYZ using J1IP for billing Document 99988811u201D
But when I am trying to display the billing document by using T Code: VF01
The system is displaying u201CBilling Document 99988811 does not existu201D.
Please help me!
Thanks
Ashu

Hai Ashu,
Go to in SAP inbox
Check any automated mail came to id (used to create VF01) - Message sub will be UPDATE WAS TERMINATED
and shows error
Error Info... 8I 336: Error in allocating Excise invoice
In that case
1. in T code: SNRO
Obejct : J_1iexcloc
for the plant series group
2. T code : SNRO
object : J_1iintpr2
for the plant Excise group
3. T code : SNUM
Object : J_liintnum
Maintain 01 - 2011 - 00001 - 10000000
And then create VF01 again and check in VF03, even then it says Document does not exist
ONLY THEN CHECK
Go to the customer master and check what is the country mentioned in the Customer master for the customer
If it is other that India this error may come.
Regards,
Mani

Invalid Photoshop Document PLEASE HELP

Yesterday night I was painting a picture on Photoshop, and I saved then closed my laptop to go to bed. Today I tried to open the file again, but it said that Photoshop could not complete my request due to it being an invalid document. I am both shocked and sad by this event because I don't know how to fix it, It will not open with programs such as paint and I've checked the properties and everything seems fine. Someone please help! I don't know what to do :C

You may have saved the file with the wrong extension. (saved a PSD, but with a .tif extension for example.) If this is the case, you should just be able to rename the file with the extension of the format the file was actually saved as and it will open okay.

"The Itunes library file cannot be saved" Error Message (-54) please help!

Hello, I was loading a music cd onto my itunes library today when I started getting this recurring Error message stating: "The Itunes library file cannot be saved. An unknown error has occurred (-54)"
It just keeps popping up, and now it let me play anything without getting it. So in a panic I realized that nothing is backed up, so I started backing up my itunes using a blank dvd and even that failed in the middle of burning. I guess it has something to do with the error message?
This scares me since I'm very careful of the types of discs I put into my Mac, and I know that disc in particular didn't have any kind of virus (its been playing in my car for the last two years actually) and it was burned on my PC using itunes a while back when the system was clean.
My music is like my life and this message is freaking me out, how do I get rid of the message without damaging my library? or what happened to make it appear?
I'm afraid of how to proceed next.....Someone please help!

I suspect some anti-virus software is incorrectly interpreting the rewriting of the file and is causing a problem.
Either way, you should definitely update your anti-virus software and definitions to the latest, and run a full scan of your system. Then tell the security software not to scan the iTunes itl file/folder.
If that does not help, you may want to recreate your iTunes library:
http://docs.info.apple.com/article.html?artnum=93313

My macbook pro 2010 model won't turn on. think its over heated. PLEASE HELP :(

I think my macbook pro 2010 model has over heated
My wife left it on a bean bag with the mains attached. when i picked it up it was very hot and now it won't turn on.You can hear the fan when you plug the mains in but it doesn't turn on. no lights or display.
Have taken it to an Apple repairer but they can find the problem. any help would be great Please help
Thank you

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
     If this does not help, contact Apple store.
     Genius Bar reservation:
     http://www.apple.com/retail/geniusbar/
     Best.

Lightroom 4 contact sheet print crashes with over 12 images - Please help.

Lightroom 4 consistently crashes every time I attempt to print a contact sheet containing over 12 images. Any less and the task is completed without error, any more and it inevitably crashes. Any thoughts?
My workaround has been to export the images and create large contact sheets in Photoshop CS6, but this takes twice as long.
This is a daily task and is significantly disrupting my workflow. Please help.
Regards,
Eliot

So, I had this problem tonight after experiencing no problems with Lightroom 4 previously. I noticed that in the print dialog box, where you can select to print "all" the pages or a page range, the page range radial was highlighted and the defined page range was "7" to "7". I was only printing one image so I changed the print range to "1" to "1". And it did the trick. Crazy, eh?

Saved Over a Document, PLEASE HELP!

Similar Messages

Maybe you are looking for