Saved passwords i cannot get it to work for one site help

i cannot get this to save a site or username and password and cannot figure out why

The website may be using autocomplete=off to prevent Firefox from saving the name and password.
You can remove autocomplete=off with a bookmarklet to make Firefox save the name and password.
*http://kb.mozillazine.org/User_name_and_password_not_remembered
*Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

Similar Messages

TS1702 I have installed a new version of an APP (mViewer). This app allows me to view security cameras in my office when I'm away. I've tried istalling it several times, put in all the information, including passwords and cannot get it to work.?

I have installed a new version of an APP (mViewer). This app allows me to view security cameras in my office from anywhere. I've tried installing several times, put in all the information, including passwords, but cannot get it to work either on my iPhone or iPad. Is anyone familiar with this app? Thank you.

I don't know this app, but I did look it up in the iTunes Store, thinking I would suggest you could visit the developer's (vendor's) site and seek assistance there.
But when I found the app and went to the vendor's site, I found garbage (nothing useful).
Oh well.

I cannot get imessage to work for me on my ipod touch 4th generation when i sign in with apple ID then it says confirm email and it keeps on going and going and going and never stops

i cannot get imessage to work for me on my ipod touch 4th generation when i sign in with apple ID then it says confirm email and it keeps on going and going and going and never stops

Try:
iOS: Troubleshooting FaceTime and iMessage activation

WPS54GU2 printing to parallel printer with Windows 7 64-bit-cannot get it to work for the life of me

Hello,
I am having the worst difficulties getting the WPS54GU2 to print to a HP Laserjet 4L printer. I know that the general communication is working as I am able to print a test page from the
I have the IP address correct for the print server (in my case it is 192.168.1.103) and is set statically in the print server setup.
I have it working fine on an XP box The port name configured on the XP machine is LK89A0B5_P1.
The software that comes with the WPS print server will not install on Windows 7 so the address/port/queue must
be set up manually.
I have tried the link from Cisco's KB that shows how to configure the print sever:
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=69efd80e2ea44d948fea2365d3e0c9eb_Configuring_TCP_I...
however this does not work and the print job either gets stuck in the print queue, or it shows busy/error in the print queue.
I have also tried suggestions on this forum that say not to create a TCP/IP port but instead use LPR port.
Can someone please give me the solution that will work. I have heard people say to use L1 for the queue name, or P1, or LP1
or lp1. I cannot spend much more time on this before I give up and look for a different print server that will work with both parallel and USB printers.
Thanks for help/suggestions on this.
Mike

sometimes it needs the device- specific drivers to get it to work; especially that you have a 64- bit OS.
the print server is already connected to the network, right? what is its IP address? check if the computer can ping that IP by going to start> search> cmd> ping 192.168.1.78 (change this to the correct IP address). if your computer can ping the print server then you can setup LPR printing to get your printing jobs done. click on the link below for more info.
Setting up LPR Printing on Windows 7

Cannot get camera to work for the first time.

I cannot get the camera to work . I have the IPad2 and just tried to use it this week. Have tried turning on &off and nothing is working. The video will not come on either. Any ideas.

Have you tried closing the Camera app completely and seeing if it works when you re-open the app ? From the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset (if that wasn't what you meant by turning the iPad off and on) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I cannot get Video to work....help.

Since I first installed arch I have not been able to get video to work at all. Dragon player just sits there and looks like its tryin to work, so I downloaded VLC and it pops up with an error telling me it was unable to play the video and to check the log for details (I have looked for the log and Im not sure where to find it). I would really prefer to use VLC but would not be objective to using dragon player if I have to. Any help would be appriciated. I am running KDE4 and have the newest update to VLC. tried with both xine backend and gsstreamer with plugins.

Do you have the packages ffmpeg or gstreamer0.10-ffmpeg installed?
Do a:
#sudo pacman -Qs ffmpeg
to make sure you have it installed.

Cannot get HttpClient to work for Windows Phone 8.1

I am new to development and trying to create a basic Windows Phone App that uses HttpClient with no success. I keep getting an unhandled exception. I get the same error whether using my own code or the downloadable sample RSS Reader:
'RSSreader.exe' (CoreCLR: DefaultDomain): Loaded 'C:\windows\system32\mscorlib.ni.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSSreader.exe' (CoreCLR: .): Loaded 'C:\Data\SharedData\PhoneTools\AppxLayouts\a8b3abf4-4e2b-49c8-ac1e-14aadef54813VS.Debug_AnyCPU.Steven\RSSreader.exe'. Symbols loaded.
'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.RUNTIME.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\WinMetadata\Windows.winmd'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.RUNTIME.INTEROPSERVICES.WINDOWSRUNTIME.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.DIAGNOSTICS.DEBUG.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.COLLECTIONS.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.THREADING.TASKS.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\System.Runtime.WindowsRuntime.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.XML.XDOCUMENT.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.XML.LINQ.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.XML.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\en-US\mscorlib.debug.resources.dll'. Module was built without symbols.
A first chance exception of type 'System.Exception' occurred in mscorlib.ni.dll
'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\en-US\System.Xml.debug.resources.DLL'. Module was built without symbols.
A first chance exception of type 'System.Xml.XmlException' occurred in SYSTEM.XML.NI.DLL
The program '[2432] RSSreader.exe' has exited with code 0 (0x0).
I am not sure what I am missing. I have searched but cannot seem to find the root cause of my issue. Any assistance would be greatly appreciated.

A first chance exception of type 'System.Xml.XmlException' occurred in SYSTEM.XML.NI.DLL
That line is your culprit. Whichever method is calling your code to parse the XML from the feed, wrap it in a try/catch.
In your catch, do a System.Diagnostics.Debug.WriteLine(e.Message);
If you're running this from the emulator, check whether your emulator has internet connectivity. If you're running from your phone, check the same.
If all else fails, you can try adding the HttpClient NuGet libraries to your project (This MAY fix the issue if it's not already loaded)

Cannot get prepositioning to work to one of our WAAS boxes

I get the following error in the syslog when trying to do a preposition job, reloaded the waas, deleted and created another preposition, still get the same error..my other 20 WAAS boxes preposition ok!
2009 Sep 9 12:31:03 FLEWAD01 java: %WAAS-CIFSAO-4-131237: (137920) Preposition
ID 8180178 failed, reason: network initialization error, retrying in 30 second

If by XI you mean XIR1 version 11.0. Then SSO was broken on the initial release, you need to patch to SPanything meany any available service pack.
Regards,
Tim

Cannot get Navbar to work on my site

I created my site using iweb and then uploaded to godaddy.com. The navbar at the top is not showing up and it is impossible to navigate through my site.

You have the "navbar replaced by dot" problem. See
http://discussions.apple.com/thread.jspa?messageID=10826187
Do Safari > Window > Activity and you will see certain files "not found". You are probably not actually uploading them for some reason.

Can't get Extreme to work for me

I bought an Airport Extreme in May and just cannot get it to work for me. It most likely has to do with my settings as it seems complicated for me. My ISP refuses to help me other than providing me with some router/IP info. They claim they have had problems with Airport Extremes (anti-Mac) and do not know how to help me and I should contact Apple. My ISP also claims they have been successful with their few Mac clients using NetGear and they can help with that.
This is depressing to me because I am loyal Mac user and have never had problems with any Mac product. But I can't figure this one out on my own. I do not see phone support for the Airport Extreme and I feel exhausted by this.
Is anyone is willing to walk me (could be painful) through this or willing to buy my Extreme and I will concede to my pro-Windows ISP. In the end, all I want is one of my computers to be online wireless.
Sigh.
Jeanine
PowerMac G5, dual-2.0 ghz Mac OS X (10.4)

Hi Jeanine,
Don't assume that it is just a question of anti-Macness. There are legitimate reasons why an ISP (or a business) decides not to support this weird device. It goes against most of what is considered reasonable by the leading manufacturers, but hey, it's Apple. They usually don't care about that as long as they have loyal customers who still trust Apple.
I'd say that the critical settings are in the Internet tab. Assuming you have your computer connected to the airport using an Ethernet cable, and that you have the Admin Utility running, go to the Internet Tab and make sure that:
1. Connect using: Ethernet
2. Configure IP - It depends. You say that your ISP has given you some router/IP info. In that case, you need to choose "Manually" and enter all the fields following this setting. Otherwise, they might have told you that you will be assigned a DHCP address, and in this case choose "Using DHCP." The last two boxes ("Domain Name" and "DHCP ID") are usually not utilized.
3. For "Ethernet WAN Port" Automatic should suffice, but in my case, I had to force it to 100 Full Duplex or otherwise wouldn't work. Go figure!
4. For Connection Sharing, most probably you'll have "Share a public IP address" but if the ISP gives you a set of addresses, you may need to choose "Distribute a Range..." Not probable, though.
Leave the other two tabs as default, but make sure that your computer has DHCP enabled.
Following this steps won't give you a fully working wireless network (we have not configured anything yet) but at least should give you a working state for computers connected via Ethernet wire. We can take the next step then.
Good luck. This router (and the iPhone for similar reasons) are going to make may Apple loyal customers rethink future purchases. It has certainly happened to me.
Paco

My apple ID password works for all of my devices but one. i only have one account and have changed the password several times but still cannot get it to work on my iPhone. any suggestions would be appreciated.

My apple ID password works for all of my devices but one. i only have one account and have changed the password several times but still cannot get it to work on my iPhone. any suggestions would be appreciated.

Thanks for the suggestion, Chris. I actually did not resolve the issue which is why i did not post an answer.
it turns out that my iphone seems to default to an incorrect User ID (it defaults to an @me account, which is not something that i have ever used).
even when i change the User ID in my settings for the iTunes store, it still appears when i attempt to get updates for my existing apps. however, it does seem to use the correct ID when i attempt to purchase new apps.
If someone actually had an answer to correct this, i would love to update my existing apps.
Thank you.

I cannot get scrabble to work on my ipod touch. I've uploaded, deleted, reloaded and nothing seems to work. It asks for a password but will not let me in. Anyone else have this problem?

I cannot get scrabble to work on my ipod touch. It only works on my macbook. I've uploaded, deleted, reloaded and nothing seems to work. It asks for a password but will not let me in. Anyone else have this problem?

Hi BDAqua,
I can go to /System/Library/Frameworks/, but JavaVM.framework/Versions/A/JavaVM does not exist!
Hi Linc,
I have already downloaded that updater, and it says 'A newer version of this package is already installed'

I cannot get autocomplete to work on Firefox

I cannot get autocomplete to work when signing onto to my gmail account. I have checked the computer settings and everything is in order. Is there something I need to do with FFox settings?
Thanks,
john

Is that autocomplete to save the name and password or autocomplete to only save the name (email address)?
*https://support.mozilla.com/kb/make-firefox-remember-usernames-and-passwords
*https://support.mozilla.com/kb/Form+autocomplete
*Tools > Options > Security: Passwords: "Remember passwords for sites"
*Tools > Options > Privacy > History: "Remember search and form history"

Cannot get SSO to work

I have followed the instructions from the administrators guide to configure Single sign on with windows AD but cannot get it to work. I have double checked everything but it still requests a username and password when i log onto infoview, after i have already supplied one to log onto windows
I'm currently running a trial version of crystal reports server XI, is SSO availble with this version?

If by XI you mean XIR1 version 11.0. Then SSO was broken on the initial release, you need to patch to SPanything meany any available service pack.
Regards,
Tim

Cannot get Outlook Connector work Communication Express style

We are using Sun Messaging server with Communication Express, Outlook Connector, Imap Clients.
And we have problems saving SENT items in one style. Both - IMAP clients and Communication Express works correctly - they saves sent items into folder named "SENT", but I cannot get Outlook Connector work the same way.
I have installed outlook connector (Product Version: 7.3-05.01), and configured it to set system folder names "Communication Express style".
I have set my local file:
C:\DOCUME~1\<user>\LOCALS~1\Application Data\Sun\Outlook Connector\sjoc_folders.map
content to:
[en]
INBOX=Inbox
Deleted Items=Trash
Drafts=Drafts
Sent Items=SentDoes this goes somewhere?
But nothing helps - Outlook 2007 still uses its own SENT ITEMS folder iwth this name and saves sent items in this folder.

Arnis_Juraga wrote:
I have installed outlook connector (Product Version: 7.3-05.01), and configured it to set system folder names "Communication Express style". I just tried the same with 7.3-06.01 and Outlook Connector is saving sent items in the "Sent" folder.
I have set my local file:
C:\DOCUME~1\<user>\LOCALS~1\Application Data\Sun\Outlook Connector\sjoc_folders.mapYou changed the file or the file already contained the contents you mentioned?
Does this goes somewhere?I don't understand the question. The file is already located where it is supposed to be.
But nothing helps - Outlook 2007 still uses its own SENT ITEMS folder iwth this name and saves sent items in this folder.Have you tried removing the current Outlook Connector profile and installing/configuring afresh?
Regards,
Shane.

Saved passwords i cannot get it to work for one site help

Similar Messages

Maybe you are looking for