Saved project from migration does not have video files? Will manually reloacting each video keep the editing intact on the project?
I had a computer crash but was able to manually drag over and save all my imovie projects. The corresponding videos did not transfer over during the migration. I have had to manually go in and re-import each of the video clips. Will the manually reimported clips automatically replace the missing files and keep the edits intact?
So for example, a missing file in the project has the first 5 seconds clipped off and some image stabilization. The project says I need to reimport the original source media (File X). I import File X so it is now in the library. Will imovie now recognize File X as the source media and automatically plug it in, complete with the cropped 5 seconds and image stabilization? If it is not automatic, is there a process I need to complete to accomplish this?
Thankyou very much for the help.
If you attempt to start a new project and import one of those files does it allow you to simply import them?
Similar Messages
-
Hi,
I am getting this error from visual studio 2012 whenever i try to create the following project types:
- Workflow Custom activity
- Web parts
The error is as mentioned below
"The partial project item type does not have a value for this property"
Due to this the when I add above type of items in my project, they show a red cross icon against them.
Please let me know If have you any solution?Hi
I had same issue. Below is the solution
Installing
"Visual Studio 2012 Update 3" usually solves this problem. (You can download it through microsoft's official site at
"http://www.microsoft.com/en-in/download/details.aspx?id=39305")
Hansraj Rathva -
My iphone 5s bought from kuwait does not have facetime. How could i install facetime on my iphone 5s?
Again:
You can't. FaceTime is banned where you purchased your phone & permanently removed from your phone. There is no way to add it back.
What part of "You can't." & "There is no way to add it back." do you not understand? -
i just purchased the apple tv, i have an older tv that does not have an HDMI input. is there a converter i can get because the itv only have an HDMI output ? help.
Welcome to the Apple Community.
There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p. -
The new iTunes 12 does not have a rent tab. I've downloaded two movies which appear in the Movies folder on my Windows Explorer but not in the actual iTunes programme itself. Completely frustrating! Where can I find these two movies to watch? It asked me once it was downloaded if I wanted to watch it but I wasn't ready to and now can't find where to play these again.
When iTunes/iPod sync process failed due to timeout, the iPod, has only the initilaised filesytem structure at the start of the Sync.
The timeout failure could be due to
Bad hardisk - do the iPod disk diagnostic, refer to this excellent post by tt2
Slow USB port or resource - Dont use any USB hub, disconnect all other USB devices while syncing
Timeout due to Antivirus or other plugins - disconnect from Internet and stop the Antivirus or monitoribng software if you are syncing.
Preferably stop doing other things while syncing this ancient device, which the latest iTunes designer, think will soon be extinct.
Have a nice day! -
My Ipad is frozen. It has info box that Icloud does not have enough storgae. Will not close, shut down or anything. no touch response at all.
Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until the device restarts, so you will be able to use the device again -
Upload document does not have correct file name
I have a procedure that uploads the file in the table with BLOB. We have a DAD entry on our application server as
<Location /pls/excess_admin_qa>
SetHandler pls_handler
Order allow,deny
Allow from All
AllowOverride None
PlsqlDatabaseConnectString 10.125.1.129:1521:sidq02 SIDFormat
PlsqlAuthenticationMode Basic
PlsqlDefaultPage eeq_main
PlsqlDocumentTablename eeq_documents
PlsqlDocumentProcedure eeq_attach_download
# PlsqlAlwaysDescribeProcedure Off
</Location>
and I have another table in my application to connect the table to other ID's.
It used ot work before, but noe it does not work. The file name should have prefix unique id like "F909307841/Blue hills.jpg", instead I get only C:/temp?Bluehills.jpg.
The table structure is
EEQ_DOCUMENTS
NAME VARCHAR2(128 BYTE),
MIME_TYPE VARCHAR2(128 BYTE),
DOC_SIZE NUMBER,
DAD_CHARSET VARCHAR2(128 BYTE),
LAST_UPDATED DATE,
CONTENT_TYPE VARCHAR2(128 BYTE),
CONTENT LONG RAW,
BLOB_CONTENT BLOB
What could have cause this?yshah wrote:
It used ot work before, but noe it does not work. The file name should have prefix unique id like "F909307841/Blue hills.jpg", instead I get only C:/temp?Bluehills.jpg.
What could have cause this?What browser is being used?
For security/privacy reasons recent versions of browsers by default do not send local file path information from File Browse items to the server, nor expose the file path in the control's JavaScript methods. IE6 & IE7 still yield the path in Windows format. IE8+ adopted an irritating approach of replacing the path with a wholly imaginary "C:\fakepath\"—and this monstrosity has sadly had to be enshrined in the HTML5 spec so we're now saddled with this everywhere...
Changing IE's security config setting "Include local directory path when uploading files" enables the path to be exposed, which appears to be the most likely explanation for this.
For more information see:
http://lists.whatwg.org/htdig.cgi/whatwg-whatwg.org/2009-March/018980.html
http://blogs.msdn.com/ie/archive/2009/03/20/rtm-platform-changes.aspx
http://developers.whatwg.org/number-state.html#file-upload-state -
Pages '09 Does Not Have "Sidecar" File?
I read somewhere that a difference between Pages '08 and '09 is that '09 no longer stores formatting data, etc. in a .xml "sidecar" file. Is this correct?
A couple of times I have had Pages '08 files that would not open because the file was no longer "viable" (or similar terminology...) and I assume that the problem was with the .xml file. (The problem may be related to an encryption program that I use.)They were mostly in the early postings for '09, so do what I did go back to the older posts, I also searched on "packages".
A few I found:
http://discussions.apple.com/thread.jspa?threadID=1868842&tstart=300
http://discussions.apple.com/thread.jspa?threadID=1867325&tstart=345
http://discussions.apple.com/thread.jspa?threadID=1866132&tstart=360
http://discussions.apple.com/thread.jspa?messageID=8793268�
http://discussions.apple.com/thread.jspa?messageID=8854053�
http://discussions.apple.com/thread.jspa?messageID=8763471�
http://discussions.apple.com/thread.jspa?messageID=8829762� -
How do I update to a higher operating system when I can't locate the settings position to begin?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
Yosemite: Saved search from Spotlight does not work the same
Hi,
I have various Logic Pro folders throughout my computer and want to create a Saved Search that brings all and only the Logic project files together into one place.
There's a couple of catches: the Logic file extension has changed over the years with the various application updates.
It would be nice to create a Smart Folder/Saved Search with something like File Extension:logic OR File Extension:logicx OR File Extension:lso
However if you just add these search criteria as separate lines, it appears they are "AND" filters so nothing shows up at all.
I seem to remember older versions of Smart Folders allowing you to have much more control over boolean search parameters.
After a bit of online investigation I discovered that you can do some more complex searches using Spotlight and then save it as a Smart Folder or Saved Search.
In Spotlight I used:
Kind:Logic -.0 -(crashed) -.cst -.pst -.prf -.patch -.logikcs
This cleaned out all the extra unneeded files and backups that are associated with Logic and just displayed only my desired .logic, logicx and .lso files.
Awesome! Then I saved it as a Saved Search in the sidebar.
Which doesn't work. Or at least the extra flags don't work. All I am seeing is the Kind:Logic again.
This is how the Spotlight search translates across into the Saved Search window (I can scroll across to see the extra flags). Any good ideas or workable solutions? Thx!>
fromObject in the code above is a key (String) that I retrieve from the OrderedHashtable and clone it using the code above.No. How could that code possibly clone a String? Where are you telling it what the new String's contents should be?
(HINT: Nowhere.)
I guess there is a work around where I can check if the cloneClass is an Instance of String and just do fromObject.toString(), but I was curious to know if there was a change in the way class.newInstance() works in Java 1.5No, it has not changed. -
Oilpaint filter the only one that does not have .pbk file
hello,
i just learned about pixel bender and installed it in photo shop. i also copied the "pixel bender files" folder into plugins/effects directory for after effects to try them out there.
i really liked playing with the OILPAINT filter in photoshop, but when i looked for it in AE i realized something weird... there is no .pbk file for OILPAINT like there is for all the other filters. - so, it doesn't seem i can use it in ae...
does anybody know why this is? or how to work around it?
thanks
maxThe oilpaint filter is currently proprietary to Adobe which is why there's no PBK file for it. If you'd like to see it in After Effects you can make a request on the AE forums.
-
The previous versions of firefox had google by default, which was the best. But now it seems firefox needs money very badly so it has tied up with yahoo to have it as default search engine.
I have tried everything all that the volunteers have suggested but nothing works.
So what to do?? Dump firefox and go back to explorer??? Or can this be fixed????Fix it easily.
follow the steps here:
[http://www.firefoxfacts.com/2008/01/13/change-default-search-in-firefox/ Change Default Search in Firefox]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem. -
I am trying to set up my new Canon MG5320 printer to my wireless network. However, there is no button on the Airport Extreme to push when I get to that step in the set-up directions. I am using OSX.8.2. Suggestions please!
If the display shows the "Press and hold the WPS button..." message on the MG display, press the red Stop button on the MG and then select Standard Setup. The MG will search for networks and should display your Airport Extreme's network name. Select this and then enter the password to connect to this network.
-
Mini mac does not have room to run all app or upgrade
Help please. My mini mac is telling me that I do not have enough room to upgrade or run all my apps. Can I upgrade something inside the drive and if I can, can I just go to the Apple store and have that done?
We purchased the mini mac Christmas 2008 and I have added final cut but nothing else. I do have an awful lot of photos in iphoto, would it help me to backup those onto a external drive then delete those items for more space? I'm taking about 4,000+/- photos and 253 events.
Hardware Overview:
Model Name: Mac mini
Model Identifier: Macmini2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 1.83 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MM21.009A.B00
SMC Version (system): 1.19f2
Serial Number (system): YM746697YL1
I don't know if this info will be necessary or not. I just wanted to have my bases covered.
Thanks.When I was working in itunes a message popped up telling me there was a problem saving the itunes library. When I attempt to upgrade I receive the message:
"Your hard disk does not have enough space. 2.8 GB is required to download and install the updates. Extra space is required for the optimization process. To free up space, remove files from your start up disk, then try again."
I have one movie in final cut and its approx 14 minutes. There are 4 unpublished movies in imovie and 2 published.
What type of firewall external harddrive do you recommend? I have 2 WD passports for storage. -
How can I add location to a photo that does not have a gps location? On iPhoto it was easy.
how can I add location to a photo that does not have a gps location? On iPhoto it was easy.
You can use the Settings in the slideshow to Show Captions, either the Description filed be display, the Title field or both.
If you create the slideshow in iDVD from still photos from iPhoto you can add the Description and/or Title via the settings in iDVD.
Since iDVD adds both automatically the user must go thru the slideshow and remove those items not wanted.
Maybe you are looking for
-
Help needed in building a query
Hello, I am using Oracle DB 11g. I want to write a query which gives the next and previous rows for a table, depending upon another column A. That A column value is from 1 to 10. If i select column value as 3 then i should get data for column value 2
-
Apple drop down menu not appearing.....
Recently had to do a complete restore from my back up to my mac mini. Seems to have sorted out most of the problems I was having (but not all). However the Apple Symbol drop down Menu in the Menu bar turns blue when clicked on, but no sub menu appear
-
Anyone know how to get my chase app working again?
-
Add field in sq01, infoset query.
i am trying to create a virtual field in sq01. i am creating a infoset query where i want to add two fields and need to displayed in the report. how can i do that without enhancing the infotype? i just need to add two fields and need to be displyed i
-
Hi guys, i've a question for you. My Jsf Application allow user to upload a txt file thanks to a Myfaces component. I want manipulate later this file and i know that exist getInputStream function that allow it. My question is that i have to add to my