Saved VI file size changes when data is visible on a graph but not the default value

If a VI is saved when data is visible on a graph, the file size is larger; even though the default is set to be a blank graph. I have tested this in LabVIEW 8.6 and 2009. If you load the larger file, the graph is blank as expected. If this behavior is by design, it appears odd to me.
To duplicate the issue:
Create a blank VI.
Add a Sine Waveform VI and set the number of samples to 1,000,000.
Add a Waveform Graph VI that spans the entire monitor and connect it to the output of the Sine Waveform VI.
Save the VI and note the file size.
Run the VI.
Save the VI and compare the size to the original size.
The VI file size is larger.
In the Waveform Graph, select “Reinitialize to default value.
The VI file size returns to It’s original size.

Your obeservation is correct, and expected behavior.
This behavior is useful when you have inputs that you would like to set as defaults for the user.
Obviously, if there is a value to be saved, it will require some memory to store the value.
If the input is left empty by default, that memory is made available again.
It may not be easy to think of a good use for this for a graph, but think about for numeric or string controls.
What if the user isnt sure how they should input a certain parameter or value?
You could store a default value so they could see how they should input their value.
Message Edited by Cory K on 09-15-2009 11:12 AM
Cory K

Similar Messages

I downloaded the PSD trial. Worked in it. Saved my file. Now when I try to open it it says "not a valid photoshop file"

I downloaded the PSD trial. Worked in it. Saved my file. Now when I try to open it it says "not a valid photoshop file"

That depends on why it won't open. Most of the time it means the file is corrupted and unlikely to be recovered. If you saved it right after adding or copying a LOT of layers - then it might just be the layer limit and we can attempt to recover it.

Why does the file size change when put into an iDVD project? And problems with dual layer discs...

I exported a short video of mine from Final Cut Express and the size of the file came out to 7.3 GB. When I put it into an iDVD project, it says that the file is only 800 MB. I tried just burning it onto a dual layer disc anyway to see if it might still burn at the original file size, but the disc came out unusable for some reason, and obviously hadn't been burned anywhere near full-capacity. So, I tried it again, and the exact same thing happened.
I guess my first question is: why is iDVD changing the size of the file? I want the quality to be the best it can be, so keeping it at 7.3 GB as opposed to 800 MB is rather important.
Secondly, why did the dual layer discs come out unusable? I've burned single layer discs before and they haven't been an issue. Also, I know for a fact that the drive can burn dual layer discs, so that isn't the issue.
Thanks in advance to anyone who can provide me with help on this issue.

LivelyJamesS wrote:
I exported a short video of mine from Final Cut Express and the size of the file came out to 7.3 GB. When I put it into an iDVD project, it says that the file is only 800 MB.
Guessing here but it looks like you edited/exported an SD/DV sequence of about 30 min in FCE. DVD needs to be MPEG-2 so iDVD compresses the original file down to the size that you report.
LivelyJamesS wrote:
I guess my first question is: why is iDVD changing the size of the file? I want the quality to be the best it can be, so keeping it at 7.3 GB as opposed to 800 MB is rather important.
The quality will be what the MPEG-2 compression and the software allow for. MPEG-2 is DVD standard .... there's no way around that.
LivelyJamesS wrote:
Secondly, why did the dual layer discs come out unusable? I've burned single layer discs before and they haven't been an issue. Also, I know for a fact that the drive can burn dual layer discs, so that isn't the issue.
Guessing again but it would seem that you burned a Data DVD instead of a Video DVD which would be unusable by a set-top player. As I said above you can't get around DVD standards.
If by any chance your video was HD originally you can try to go the Blu-Ray route using Roxio Toast or FCS 3 (discontinued) or FCP X. You will also need a Blu-Ray burner.

After copying a file from NTFS to HFS volume, file size changed when viewing in Windows

Hi guys,
I have a Mac Air running Mavericks on a HFS partition and Windows 7 on a BOOTCAMP NTFS partition. I have some files that I want to read/write from/to both systems. Since OS X can't write NTFS and Windows can't write HFS either, and I don't want to use any 3rd-party tools/drivers, I have to adopt a "stupid" way: in OS X, I copy those files from NTFS to its HFS partition, make changes, then switch to Windows and sync them back to NTFS.
The problem is, after I copied a file from NTFS to HFS in OS X, it seemed ok. But when I switched to Windows, the very copied file in HFS partition had its size changed (bigger) although I didn't make any changes to it in OS X yet. This happens to almost every file I copied, text and binary. For those text files, I tried to open it with EditPlus in Windows and EditPlus reports the correct size on the status bar.
How could this happen?

I am not sure if this is what your seeing but...
The same unaltered file on two different volumes might use different amounts of disk space. This is because a 'disk' is divided in to 'blocks' and a block (also historically known as a 'sector') is a certain minimum size. So if disk-1 has a block size of 512 bytes and disk-2 has a block size of 1024 bytes then a file containing just 10 bytes will use up twice as much space on disk-2 as disk-1 even though it is the exact same file.
Beyond that, Macs can add additional information like Spotlight tags, labels, icons, etc. which make a file bigger. If you are modifying a file then presumably that also implies adding additional content e.g. for a Word document more text and this will make it bigger. Also depending on some programs are configured or designed 'deleting' text may only mark it as deleted and not really delete. This can apply to older versions of Word which has a 'Fast Save' feature, new versions have removed this and do a proper delete.
You would have to give more details like what you are doing to the document, what kind of document, and what the two sizes are.
Finally, there is one other potential difference, some systems and manufacturers use 1024 as a unit for measuring file and disk sizes, some use 1000. It will be the same number of bytes in each case but 1000 bytes in one case would exactly equal 1MB, and in the other it would be 0.9765MB.

File size changing when pass through after effects (180Mb file goes in and comes out 33GB on export)

im processing a video recorded of an interview where the lighting was not very good on the interviewee
im brightening up the light on the interviewees face
the file was a 180Mb H.264 file on import
when i export the file its coming out at 33GB in size.... im not sure why this is
i have chosen the default setting "lossless" as the format for export
i just want the file to export the same size and quality as it was when i imported it
what options should i choose for this? AE does not seem to tell me how big the end file will be and it takes 1 hour and half to process this 2 minute interview so it will take me an awfull long time to get to the bottom of this if i try by myself
thanks

It doesn't "increase" the file size. You're making a brand new file.
What you put into After Effects has nothing to do with the resulting file. You can have an AE composition with no footage whatsoever and the resulting file will be much larger than 0!
After Effects works internally with completely uncompressed pixel data, so no matter what you toss into it, it produces whatever you tell it to produce. As Mylenium points out, you made an uncompressed final file.
Your original video file is VERY compressed. So, of COURSE uncompressed video is going to look massive by comparison.
Read Mylenium's link to understand a bit more and go here to learn AE: Getting started with After Effects There are lots of "gotchas" like this that'll bit your butt if you skip this basic training stuff.

Alac file size changes when added to iTunes

Hello,
I've converted some FLAC files to ALAC using dbPowerAmp. The file bit rate remains unchanged. However, when I add the ALAC files to iTunes, the bit rate shown in iTunes is reduced.
Example - Alice Cooper, Hello Hurray
FLAC Bit Rate - 4608 kbs
Converted ALAC Bit Rate - 4608 kbs
iTunes ALAC Bit Rate - 3012 kbs
Any ideas what's going on?
I'm using iTunes 10.7.0.21
Thanks.

Nothing has been changed.
Sounds like iTunes & dbPowerAmp figure the bit rate differently.
dbPowerAmp uses the uncompressed file sizeand iTunes figures the compressed file size.
Since the file is smaller, the bit rate will have to be lower.

Why do file sizes change when I use "Process Multiple Images" to add watermarks?

Hi,
I'm using Elements 11. In order to add watermarks to many JPG pics at once, I use the function "Process Multiple Files".
I select a source folder and a destination folder, and adds a three digit serial number to each file. I do NOT tick the checkbox marked "Change picture size". After that I define the watermark I want printed on my pics and hits OK. All the files in the source folder are processed and saved, with a new name in the destination folder. Fair and square.
But. The file size of the new file is heavily reduced, compared to the original. It goes from 10 MB down to 500 KB (in general). Why is that? Is there any way I can prevent it?
Regards,
/Mikael Lindgren

Or you can uncheck the convert files box to save them in their original format, or select one of the lossless formats PSD, BMP, TIF. What is most appropriate depends on what you intend to do with the watermarked versions.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Spry Data Set visible in Live View, but not on Site.

Hi,
I've used the spry data set widget to create a dynamic table. Everything looks fine in the live view. On the site itself, however, I see only a brief flash of the unpopulated spry table, and then nothing. All necessary files, including those in the SpryAssets folder, have been uploaded.
This is particularly frustating since my first crack at a spry data set worked with ease.
I have the feeling that I missing something simple. Any ideas?
Here is the table:
http://www.ldcsb.on.ca/ntip/teachphotos/profiletable.html
Here is the spry data set:
http://www.ldcsb.on.ca/ntip/teachphotos/profiles.html
Thanks for looking,
Jim

Jim, Your page comes up fine in Firefox, but as you said it flashes and disappears in IE8.
I notice some differences in the ids and Spry:sort values. You might sort those out (make them the same) and see what happens.
This is in the profiletable:
<td id="Image">Image</td>
<td id="First">First </td>
<td wid="Last">Last </td>                                        lose the w
<td id="Sschool">School</td>                                   lose the extra s
<td id="Grade">Grade </td>
<td id="Subject1">Subject1</td>
<td id="Subject2">Subject2</td>
<td w id="Description">Description</td>                    lose the w and the extra space
And this in the Spry region:
<th spry:sort="Image">Image</th>
<th spry:sort="First">First</th>
<th spry:sort="Last">Last</th>
<th spry:sort="School">School</th>
<th spry:sort="Grade">Grade</th>
<th spry:sort="Subject1">Subject1</th>
<th spry:sort="Subject2">Subject2</th>
<th spry:sort="Description">Description</th>
It's possible that IE is pickier than Firefox that the names be the same.
Other than that, look for things to clean up, like tightening up the table...I notice several places in the data where there are blank lines between the </tr> of one line and the <tr> of the next. Make sure every entry in the table has a cell for every column.
You're right; it is an easy Widget to work with...unless some tiny thing goes wrong and it doesn't work! I have had a data set that had some of those tiny anomalies, fixed them, and now I know to look for them.
Beth

File size changes when extract page saved

I receive PDF files with multiple pages that I have to separate. I use Adobe Acrobat 7. I open the large file, extract a page and delete it from the larger file, then save the single page with a different name. I work my way through the large file until all pages are separated. I have been doing this successfully for a long time. Today, I received a 870kb file with 24 pages. Usually the individual pages are around 50kb. Today, each extracted file was around 300kb. This made each of the 24 pages well over 10mb when the origial single file was only 870! This just started happening suddenly. I have made no changes to settings from the last time I extracted pages this way. Can anyone help? This is a huge mystery and needless to say, a huge handicap! Thanks!

Thanks much for your reply. It said that "images" was 55.61% and "X object forms" was 41.10%. The rest were less than 2% each. Other PDFs I work with are created by a designer the same way as the ones I had problems with. For some reason, my Adobe is treating some of them differently when I extract pages. A single file that was 870kb and 24 pages wound up being about 10mb-worth of 24 individual pages. Any ideas? Thanks again!
Kim

Isync transfers data to Ical from Nokia 5800, but not the other way round

When I sync my Nokia 5800 using Isync, diary entries from my phone are moved onto my Mac, but entries made on my Mac are not transferred to my phone. This leaves my phone calendar without any entries. Am I doing something wrong here, or is this a bug? Does anyone know how to transfer this data back into my phone? My contacts swap both ways no problem. I have installed the Nokia 5800 app. Many thanks.

I'm not sure what else to suggest. As the Nokia 5800 is not natively supported by iSync you must be using an iSync Plugin, so I'd advise contacting the author of the plugin - it may be buggy and need fixing.

Large file size increase when editing in PS3

I shoot mostly JPG with most file sizes in the 5MB range. Today I sent 3 files to PS3 for auto alignment and blending to a panorama. When complete, the resulting PSD file back in my Lightroom library is 495MB. When I export the PSD panorama as a JPG for printing a 9" x 36" with 180 dpi the resulting JPG is only 6.1MB. I imported the 6.1MB JPG panorama back into Lightroom for comparison with the 495MB PSD file and they look nearly identical even at 100%. Will someone please explain to me what is happening to cause these remarkable file size changes ? Any reason other than the time it takes not to replace the PSD file in my library with the smaller JPG when finished with the process ?
Powerbook G4 - 1.67GHz - 2GB SD Ram; OS 10.4.11; Library on external drive; D300

jpeg is a lossy compression that uses an algorithm based on human vision research that gets rid of information in the file that we cannot generally really see and compresses color ranges that we are less likely to see changes in (typically reds) more than colors our eyes are very sensitive to (yelow and green). At least when you use a high quality setting. PSD on the other hand, uses a lossless compression algorithm that retains ALL information in an image regardless of whether you should be able to see it or not. Now sometimes you might want to do an edit that for example lifts up shadows. If you started with a jpeg, that information might already be gone, but when you saved as a psd, you might be able to retrieve it as the compression algorithm did not already throw away the information. Another example is subtle gradients in certain colors, such as blues or reds. Say you want to make the color more saturated. You're likely to start seeing banding with the jpeg, while you'll probably get good results with a losslessly compressed file.
Lastly, the psds Lightroom writes are typically 16 bits, which means again more precision. They can also contain layers such as adjustment layers, which allows you to later go back on your edits. Jpeg cannot do any of these things. It might be alright to store a finalized file as jpeg, but be aware that you'll be limited to what you can do with them if you change your mind. Harddisk space is supercheap nowadays.

Image size changes when moving an image between Lightroom and CC.

Image size changes when moving an image between Lightroom and CC.
I opened a .dng image in LR and then opened it in the Develop module. I clicked on Crop Overlay and then on the ‘As Shot’ drop down menu (the lock is closed) and cropped to 11 x 17 and clicked ‘Done’-.
I click Cntl-E and the image opens in CC. There I click on Image > Image Size and the Image Size is 13.288 inches by 20.533 inches.
Why does the image size change?
I believe there is a menu to control the size of the image and I've looked everywhere I can think of in LR and CC, I googled various descriptions and I checked two of Scott Kelby's books, but I just can't figure out how to keep the image a consistent size when moving between LR and CC.
Help!...Please?

The penny will drop soon or maybe the cloud will lift.
In Lightroom all editing is undoable/nondestructive.
Hence a crop of 3x2 is not inches, centimetres, pixels or anything else. It is jst a ratio. When a file is exported, either to PS or disk, then the crop ratio has size determined in respect of pixels and inches or cms.
So my 6000x5000 pixel image I will crop to 3x2 that leaves (before exporting) a 6000x4000 file.
Now when exported it can be set to export at
100pixels per inch and will end up at 60x40" when printed.
200pixels per inch will end up at 30x20"
300ppi will end at 20x13.3"
You will notice in the Crop Tool there are no size denominations such as inches or centimetres as an image file only has pixels and the determination of size is done through exporting or printing.
Hope that helps somewhat..

PDF file size increases when I add a Email Submit button

Hello,
My PDF form is 87KB. Once I add a Email submit button the file size jumps to 525KB. Why?
Reason this confuses me is that it seems to be inconsistent. I have added this function to other PDF forms and the file size only increased a few KB. Every now & then adding a button or Javascript will increase the file size.
I have retraced my steps over & over, but I cannot find a answer to why this is happening.
Thanks for the help everyone!
-CM

The problem is the font. Use Helvetica instead. When you do, Acrobat/Reader actually use a version of Arial anyway.
When you use one of the non-base-14 fonts (Helvetica, Times, Courier, [and their bold, italic, bold italic variants] Symbol, and Zafp Dingbats) for a form field, Acrobat has to embed the entire font in the file, and some can be rather large. The base-14 fonts are guaranteed to be available for use by the compliant PDF viewer, so there is not need to embed them in the file. A viewer is allowed to substitute suitable replacement fonts, which is what Acrobat/Reader now do.
The problem is you can't simply go back and change the font to Helvetica and see the full size reduction that you'd expect after you do a Save As. This is because Acrobat does not clean up everything as well as you might expect. So what you have to do is go back to a version of the form that does not have the button, or copy & paste the field from the old form to a new PDF that doesn't have any fields, but delete the button first. Then create the button anew.

XML File size changed

Hi, All:
I wondering why the XML file size changed after go through DB using CLOB. The original size is 1KB, but after I use the PUT and GET method, the size changed to 8KB. There is a lot of space appened to the content.
Thanks a lot!

Can you provide an example of the code you are using for the put / get method. In SQL*PLUS I do not see what you are talking about
SQL> create or replace directory xmltemp as 'c:\temp'
2 /
SQL> drop table xmltest
2 /
SQL> host dir c:\temp\testcase.xml
Volume in drive C has no label.
Volume Serial Number is 8CC2-E429
Directory of c:\temp
02/01/2006 04:48 AM             1,174 testcase.xml
               1 File(s)          1,174 bytes
               0 Dir(s) 23,780,163,584 bytes free
SQL> --
SQL> host type c:\temp\testcase.xml
<PurchaseOrder xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xfiles:8080/home/SCOTT/poSource/x
sd/purchaseOrder.xsd">
        <Reference>EABEL-20030409123336251PDT</Reference>
        <Actions>
                <Action>
                        <User>EZLOTKEY</User>
                </Action>
        </Actions>
        <Reject/>
        <Requestor>Ellen S. Abel</Requestor>
        <User>EABEL</User>
        <CostCenter>R20</CostCenter>
        <ShippingInstructions>
                <name>Ellen S. Abel</name>
                <address>300 Oracle Parkway
Redwood Shores
CA
94065
USA</address>
                <telephone>650 506 7300</telephone>
        </ShippingInstructions>
        <SpecialInstructions>Counter to Counter</SpecialInstructions>
        <LineItems>
                <LineItem ItemNumber="1">
                        <Description>Samurai 2: Duel at Ichijoji Temple</Description>
                        <Part Id="37429125526" UnitPrice="29.95" Quantity="3"/>
                </LineItem>
                <LineItem ItemNumber="2">
                        <Description>The Red Shoes</Description>
                        <Part Id="37429128220" UnitPrice="39.95" Quantity="4"/>
                </LineItem>
                <LineItem ItemNumber="3">
                        <Description>A Night to Remember</Description>
                        <Part Id="715515009058" UnitPrice="39.95" Quantity="1"/>
                </LineItem>
        </LineItems>
</PurchaseOrder>
SQL> --
SQL> create table xmltest of xmltype
2 /
SQL> insert into xmltest values (xmltype(bfilename('XMLTEMP','testcase.xml'),nls_charset_id('AL32UTF8'),null,1,1))
2 /
SQL> commit
2 /
SQL> select dbms_lob.getLength(value(x).getClobVal())
2    from xmltest x
3 /
                                     1193
SQL> set long 100000
SQL> set echo off
SQL> set pages 0
SQL> set lines 150
SQL> set heading off
SQL> set feedback off
SQL> set trimspool on
SQL> spool c:\temp\testcase.xml.out
SQL> --
SQL> select object_value
2    from xmltest
3 /
<PurchaseOrder xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xfiles:8080/home/SCOTT/poSource/x
sd/purchas
eOrder.xsd">
<Reference>EABEL-20030409123336251PDT</Reference>
<Actions>
    <Action>
      <User>EZLOTKEY</User>
    </Action>
</Actions>
<Reject/>
<Requestor>Ellen S. Abel</Requestor>
<User>EABEL</User>
<CostCenter>R20</CostCenter>
<ShippingInstructions>
    <name>Ellen S. Abel</name>
    <address>300 Oracle Parkway
Redwood Shores
CA
94065
USA</address>
    <telephone>650 506 7300</telephone>
</ShippingInstructions>
<SpecialInstructions>Counter to Counter</SpecialInstructions>
<LineItems>
    <LineItem ItemNumber="1">
      <Description>Samurai 2: Duel at Ichijoji Temple</Description>
      <Part Id="37429125526" UnitPrice="29.95" Quantity="3"/>
    </LineItem>
    <LineItem ItemNumber="2">
      <Description>The Red Shoes</Description>
      <Part Id="37429128220" UnitPrice="39.95" Quantity="4"/>
    </LineItem>
    <LineItem ItemNumber="3">
      <Description>A Night to Remember</Description>
      <Part Id="715515009058" UnitPrice="39.95" Quantity="1"/>
    </LineItem>
</LineItems>
</PurchaseOrder>
SQL> spool off
SQL> --
SQL> set echo on
SQL> host dir c:\temp\testcase.xml.out
Volume in drive C has no label.
Volume Serial Number is 8CC2-E429
Directory of c:\temp
06/11/2006 01:53 PM             1,313 testcase.xml.out
               1 File(s)          1,313 bytes
               0 Dir(s) 23,780,163,584 bytes free
SQL> --
SQL> host type c:\temp\testcase.xml.out
SQL> --
SQL> select object_value
2    from xmltest
3 /
<PurchaseOrder xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xfiles:8080/home/SCOTT/poSource/x
sd/purchas
eOrder.xsd">
<Reference>EABEL-20030409123336251PDT</Reference>
<Actions>
    <Action>
      <User>EZLOTKEY</User>
    </Action>
</Actions>
<Reject/>
<Requestor>Ellen S. Abel</Requestor>
<User>EABEL</User>
<CostCenter>R20</CostCenter>
<ShippingInstructions>
    <name>Ellen S. Abel</name>
    <address>300 Oracle Parkway
Redwood Shores
CA
94065
USA</address>
    <telephone>650 506 7300</telephone>
</ShippingInstructions>
<SpecialInstructions>Counter to Counter</SpecialInstructions>
<LineItems>
    <LineItem ItemNumber="1">
      <Description>Samurai 2: Duel at Ichijoji Temple</Description>
      <Part Id="37429125526" UnitPrice="29.95" Quantity="3"/>
    </LineItem>
    <LineItem ItemNumber="2">
      <Description>The Red Shoes</Description>
      <Part Id="37429128220" UnitPrice="39.95" Quantity="4"/>
    </LineItem>
    <LineItem ItemNumber="3">
      <Description>A Night to Remember</Description>
      <Part Id="715515009058" UnitPrice="39.95" Quantity="1"/>
    </LineItem>
</LineItems>
</PurchaseOrder>
SQL> spool off
SQL> --
SQL>
SQL>Also, if I do a WebDav or FTP put/get I do not see a problem either.
C:\TEMP>ftp
ftp> open localhost 2100
Connected to mdrake-lap.
220- mdrake-lap
Unauthorised use of this FTP server is prohibited and may be subject to civil and criminal prosecution
220 mdrake-lap FTP Server (Oracle XML DB/Oracle Database) ready.
User (mdrake-lap:(none)): scott
331 pass required for SCOTT
Password:
230 SCOTT logged in
ftp> cd /public/testdir
250 CWD Command successful
ftp> rm testcase.xml
550 /public/testdir/testcase.xml : Not a directory.
ftp> del testcase.xml
250 DELE Command successful
ftp> put testcase.xml
200 PORT Command successful
150 ASCII Data Connection
226 ASCII Transfer Complete
ftp: 1174 bytes sent in 0.02Seconds 73.38Kbytes/sec.
ftp> ls -l
200 PORT Command successful
150 ASCII Data Connection
-rw-r--r--   1 SCOTT    oracle      1174 JUN 11 11:01 testcase.xml
226 ASCII Transfer Complete
ftp: 68 bytes received in 0.01Seconds 4.53Kbytes/sec.
ftp> get testcase.xml testcase.xml.out
200 PORT Command successful
150 ASCII Data Connection
226 ASCII Transfer Complete
ftp: 1174 bytes received in 0.00Seconds 1174000.00Kbytes/sec.
ftp> !dir testcase.xml
Volume in drive C has no label.
Volume Serial Number is 8CC2-E429
Directory of C:\TEMP
02/01/2006 04:48 AM             1,174 testcase.xml
               1 File(s)          1,174 bytes
               0 Dir(s) 23,780,032,512 bytes free
ftp> !dir testcase.xml.out
Volume in drive C has no label.
Volume Serial Number is 8CC2-E429
Directory of C:\TEMP
06/11/2006 02:01 PM             1,174 testcase.xml.out
               1 File(s)          1,174 bytes
               0 Dir(s) 23,780,032,512 bytes free
ftp> quit
221 QUIT Goodbye.
C:\TEMP>

Why can't I save text I've entered into a PDF file? When I hit "Save As", only the PDF document is saved, but not the text i typed into the document. I'm using Windows 8.

Why can't I save text I've entered into a PDF file? When I hit "Save As", only the PDF document is saved, but not the text i typed into the document. I'm using Windows 8.

THANK YOU!
Jan Whitfield
The College Planning Center
250 Palladio Parkway, Suite 1311
Folsom, CA 95630
(916) 985-0453
www.TheCollegePlanningCenter.com

Saved VI file size changes when data is visible on a graph but not the default value

Similar Messages

Maybe you are looking for