Saveing space are locked - Speicherplatz blockiert

Hello community,
i have just a small question. My iPhone has locked some saveing space (5GB) after install iOS 4.1 - the Application that this space used as memory stick was be deleted by the update. Have anyone an idea how i can release the space?
Hallo Community,
ich habe nur eine kleine Frage. Mein iPhone hat einen gewissen Speicherbereicht gesperrt (5GB) nachdem ich das iOS 4.1 Installiert habe - die App die den Speicherbereich als USB-Stick nutze wurde durch Update gelöscht aber der Speicherbereich nicht frei gegeben, kann mir irgendwer eine Lösung geben?

Similar Messages

HT3275 2 problems: All files are locked - how to globally unlock on the backup drive? I am backing up large video files 500GB on a 2 TB machine. Time Machine repeatedly copies everything using up all of disk space. I only need 1 copy not, twenty. What to

2 problems: All files are locked - how to globally unlock on the backup drive? I am backing up large video files 500GB on a 2 TB machine. Time Machine repeatedly copies everything using up all of disk space. I only need 1 copy not, twenty. What to do?

2 problems: All files are locked - how to globally unlock on the backup drive? I am backing up large video files 500GB on a 2 TB machine. Time Machine repeatedly copies everything using up all of disk space. I only need 1 copy not, twenty. What to do?

Mac desktop. 10.6.8. Text edit. Not locked. Read and write. Still, documents are locking when they are moved from desktop to another folder on the server. Techies can't figure it out here. What am I not doing?

Mac desktop. 10.6.8. Text edit. Not locked. Read and write, not read only. Documents are locking when they are moved from desktop to another folder or saved directly into that folder on the server. Not happening with anyone else but me and the boss's computer so has to be in the properties for my text edit software. Techies can't figure it out after trying for two weeks. Boss can do a cut and paste and put into a new document, but that's starting to become a problem.

Mac desktop. 10.6.8. Text edit. Not locked. Read and write, not read only. Documents are locking when they are moved from desktop to another folder or saved directly into that folder on the server. Not happening with anyone else but me and the boss's computer so has to be in the properties for my text edit software. Techies can't figure it out after trying for two weeks. Boss can do a cut and paste and put into a new document, but that's starting to become a problem.

All files are locked, a new entry in permissions and more

Following instructions from here on how to try to correct another issue, I was repair permissions and to boot in safe mode. Since then all kinds of things are messed up.
I had to reset PRAM because the home and boot screens were were all stretched out of whack (this situation has occured once before shortly after getting this new machine)
EVERY SINGLE DATA FILE created prior to this safe mode is now LOCKED. EVERY ONE!!!!!! If I try to save any file so far I have tested, I am told the file is locked and I do not have permissions. My user mode didn't have administrative control before, but I changed that because unlocking everything to use it was more complicated having to enter the username and password. New files created are also locked. However, a new Pages file I have tested shows locked but it will save to the same file with a CMD-S.
Having to unlock files to save work in them really slows work. Apple not allowing Save As on Apple apps is getting really tedious. I tried with a non-Apple app (PhotoShop) and its files are locked after creation. This means I have to unlock every stupid file before I can save it, then it relocks If I go into Get Info to unlock the file, as soon as i close that window, the file shows locked when I do a new Get Info. This is not a good user experience!!!!!!!!!!!!!! I have hundreds of thousands of files used in publishing, graphics, photos, and music. I tried to save an existing Photoshop file back to the Desktop and was told I could not save because was locked - that I needed to unlock the file or enclosing folders. When Photoshop closes it says can't save Preferences because file is locked.
If I unlock the Sartup drive it relocks as soon as the Get Info window closes.
In Sharing and Permissions the user called Everyone has a custom settings and some files even have two Everyone entries. Newly created files have had the User with Read & Write and Staff and Everyone with Read Only. My user folder Get Info shows locked with the user, staff and everyone with Read & Write permmissions. If I unlock in Get Info it reverts to locked after I close the Info window.
Safari opens to the same page on this forum where another problem was discussed. I have reset selected items in Safari that I thought might have caused this, but no change.
Pages keeps opening a page that was thrown in the trash and is not even on the computer (at least doesn't show in the finder),
Numbers keeps opening a file that was opened and saved days ago.
iDVD will open the same project each time, even if something else has been worked on since.
I have cleared recent entries in these programs and the field keeps coming back when I open again.
I unchecked the Restore windows when quitting option in General Sys Prefs and when I open it again it is checked. I know that Lion will reopen a page if I quit without closing the window first. Now, at least with Apple apps, the same file opens now whether it exists or not as well as the new file I am opening by clicking on it.
I have run permissions check in Disk Utility several times.
It seems that it is affecting Apple apps that remember where there were last and the visiting history.
Autosave on apps other than Apple can't save because the files are locked and I get error messages.
iPhoto files saved on a firewire drive are also show locked but testing on a duplicate file, I found I can edit with PhotoShop and it will save the changes.
With Finale, it has saved the files, even though locked. The odd thing is that in the finder it shows the correct creation and modifided dates, but it shows an old last opened date. Pages documents show all three with correct dates/times.
I suspect there is at least one if not more Pref plist files that needs to be fixed, but I have now idea where to start.

HI,
Make sure you are logged in as the admin user.
Right or control click the MacintoshHD icon then click: Get Info
At the bottom of the Get Info window, click the gold padlock icon. You will be prompted for your admin password.
Under Privilege where you see: Read & Write "toggle" the arrows to set your permissions for system / admin etc.
Close the Get Info window.
Carolyn

File sharing between windows PCs creates tmp files that are locked

Hey everyone. This is bringing an old topic back from the dead. Over the weekend we upgraded to Leopard Server 10.5.4 and am now seeing this same exact problem that was discussed here and never answered: http://discussions.apple.com/thread.jspa?threadID=1290360&tstart=237
Whenever a windows user opens a word document via smb it creates as follows:
On a file called 'test save.doc', having been opened in Word, amended and saved I would end up with the following files.
~$st save.doc
~WRD0000.tmp
~WRD0001.tmp
test save.doc
These temp files are locked and can't be deleted from the users machines. they have to be deleted from the server hosting the files. Permissions are set thru ACLs and access to folders and files are working accordingly. But for some reason these temp files are being created on every word document that is opened and aren't being automatically removed after closing the document
thanks for any help!

the change that I made was to /etc/smb.conf
acl check permissions = no
I stopped the samba service, put that into /etc/smb.conf and restarted samba services.
all seems to be well on the open frontier. hope this helps someone out

Trying to restore from TM but backups are locked.

For the record, I'm running Leopard Server on an intel iMac, and using a WD USB drive for Time Machine.
I'm trying to install a clean OS and then restore my files from backup using Time Machine.
When I install a clean OS (with same admin account name), then mount the USB drive, all the files and folders of the TM backup are locked down.
For example, in Finder the folders are marked with a red minus sign. In CLI as root (sudo -s) I cannot chmod, chown or chflags these files/folders.
In CLI they look like this:
$ ls -ladeO /Volumes/Time\ Machine\ Backups/Backups.backupdb/
drwxrwx---+ 3 root staff - 102 Sep 4 16:30 /Volumes/Time Machine Backups/Backups.backupdb/
0: group:everyone deny addfile,delete,add_subdirectory,deletechild,writeattr,writeextattr,chown
One level up looks like this:
$ ls -ladeO /Volumes/Time\ Machine\ Backups/
drwxrwxrwx 20 root admin - 748 Sep 23 23:22 /Volumes/Time Machine Backups/
All other files saved to the USB drive via Finder or otherwise are not so-marked. Also, I can use the backup to do a full restore with no problem. (The backups also look like they have normal access/permissions again after a full restore.)
Is there a way for me to use this set of backups the way I'd like (vs. full restore)? Also, any idea why this is happening?
Thanks in advance!
-Matt
P.S. I also asked in the Time Machine forum. It was suggested that I also ask here since I am, after all, running Leopard Server. That thread: http://discussions.apple.com/thread.jspa?threadID=1725161&tstart=0

Bump.
Any comments on my question or the linked thread? I've been able to make some progress, but still with snags. Is this related to using Time Machine with Leopard Server? I need to restore Applications as well as user accounts (just one), but not the whole machine.
Thanks in advance.
-Matt
Message was edited by: Matt Mccabe1

Help - all data fields in all my forms are locked in design view

Working in LiveCycle Designer ES2 v.9 - I have 10 forms that I've designed for my client. I opened them this morning to edit the design and all the data fields are locked. In the Hierarchy tab, the names are greyed out. I haven't done anything to the forms since saving last night. Some of the forms are really complex and and no way do I want to recreate them. I tried saving with a different name but that doesn't work either. NB. The forms work OK when opened in Acrobat (for filling). It's just the design edits in LiveCycle that I can't do, now.

Thanks. I figured out that I had inadvertently clicked on (enabled) Lock Fields. It took awhile as when that is turned on, the menu item doesn't show that you've turned it on e.g. no check mark or default to "Unlock Fields". If it changed to "Unlock Fields", I wouldn't have spent so much time trying to figure out what happened:o).
Something the LiveCycle team may want to change in that menu.
Penni

Timemachine recovery files are locked

Hi there,
after recovering my Time Machine Backup of my account from 10.7 to 10.8 all my files have small locked symbol and I'm not able to start iPhoto or iTunes. It says the files are locked and I'm not able to open them.
Other accounts are not effected.
What happend and how can I fix it? Every file unlock and change user rights would take days.
Best regards,
Inesdora

This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. You can demote it back to standard status when this step has been completed.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Excel files are locked since transfer from pc to mac

I just transferred my excel files from pc to mac and now i can't open them, it says they are "locked for editing" by user (i did not lock them) i can only open as read only. Is there a fix for this problem? Anyone else had this problem?

Where are these files saved??
Maybe this will help...
I found this post on a different web site - http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macexcel/office-files -locked-for-editing-in-mixed/d838b0d7-6b26-4206-b310-029c73cf0ba6.
This problem is caused by a temporary file that was not deleted after a previous edit session was completed. The file is hidden and not normally visible through the Finder. The easiest way to view hidden files is to install the hidden files dashboard widget which is available here:
http://www.apple.com/downloads/dashboard/developer/hiddenfiles_matthansen.html.
Use the widget to show hidden files then use Finder to open the folder that contains the spreadsheet you wish to edit. If your spreadsheet is named abc.xlsx, you will also see a file named ~$abc.xlsx. Delete the file that begins with ~$ and you will be good to go.

PLEASE HELP---Music and Photos copied from PC are LOCKED

I copied all my photos and music from PC to USB drive then to MAC and they work fine, however, when i try to delete the desktop.ini files since mac doesnt need those and other songs or whatever I want to get rid of it wont delete because several of the folders or subfolders are locked.
To delete it I can select get info on each folder then UNCHECK Locked and it will let me delete, but how can I copy all this over or turn off the locked feature on everything at once since going through hundreds and hundreds of music folders and subfolders to click get info then uncheck locked is nearly impossible.
Thanks in advance.........
Patrick

Hi,
Open Terminal (Applications/Utilities), type this command and leave a space afterwards then having selected all the files you want to unlock, drag and drop them into the Terminal window and press return:
chflags nouchg

Service template problem - Unable to perform the job because one or more of the selected objects are locked by another job - ID 2606

Hello,
I’ve finally managed to deploy my first guest cluster with a shared VHDX using a service template.
So, I now want to try and update my service template. However, whenever I try to do anything with it, in the services section, I receive the error:
Unable to perform the job because one or more of the selected objects are locked by another job. To find out which job is locking the object, in the jobs view, group by status, and find the running or cancelling job for the object. ID 2606
Well I tried that and there doesn’t seem to be a job locking the object. Both the cluster nodes appear to be up and running, and I can’t see a problem with it at all. I tried running the following query in SQL:
SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
but all this gives me is an error that says - conversion failed when converting from a character string to uniqueidentifier msg 8169, level 16, State 2, Line 1
I'm no SQL expert as you can probably tell, but I'd prefer not to deploy another service template in case this issue occurs again.
Can anyone help?

No one else had this?

Unable to remove a host from VMM - Error (2606) Unable to perform the job because one or more of the selected objects are locked by another job.

I am unable to remove a host from my Virtual Machine Manager 2012 R2. I receive the following error:
Error (2606)
Unable to perform the job because one or more of the selected objects are locked by another job.
Recommended Action
To find out which job is locking the object, in the Jobs view, group by Status, and find the running or canceling job for the object. When the job is complete, try again.
I have already tried running the following command in SQL Server Management Studio
SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
I received this error back:
Msg 8169, Level 16, State 2, Line 1
Conversion failed when converting from a character string to uniqueidentifier.
I have also tried rebooting both the host and the Virtual Machine Manager Server. After rebooting them both, I still receive the same error when trying to remove the host.
Here are my server details
VMM Server OS = Windows 2012 Standard
VMM Version = 2012 R2 3.2.7510.0
Host OS = Windows 2012 R2 Datacenter
Host Agent Version = 3.2.75.10.0
SQL Server OS = Windows 2012 Datacenter
SQL Version = 2012 SP 1 (11.0.3000.0)

Hi there,
How many hosts are you managing with your VMM server?
The locking job might be the background host refresher job. Did you see any jobs in the jobs view, when the host removal job failed?
If there is no active jobs in the jobs view when this host removal job fails, can you please turn on the VMM tracing, retry the host removal, and paste back the traces for the failed job (search for exception and paste the whole stack)?
Thanks!
Cheng

System and sysdba accounts are locked

Hi
System and sysdba accounts are locked I cannot connect
is there a solution for it??

no one answered but I could solve it using the user sys.

SAP BPC 7.5 (MS) - The members are locked.

Problem occured when the processing time to clear down one TIME period of data took 3 hours on Fri pm.
On Monday morning, I executed a Run Package > Clear > on the same segment. It ran for 1hr and 10 minutes and I escalated to our Helpdesk for a server reboot (this has worked in the past). The server was rebooted before I executed an "Abort" on the clear function.
When the server was backup, I "aborted" the clear.
Subsequent attempts are CLEAR resulted in the message "The current members are locked::(N'ACTUAL'<N'2011.JAN")(ACTUAL,2011.JAN).
Things I had tried in order:
1) send data to one intersection of ACTUAL, 2011.JAN via EVDRE- failed - The current members are locked.
2) Full Optimize on application. then repeated (1). Same results.
3) Full Process on dimensions Category (ACTUAL) and Time (2011.JAN). Process Application. Repeated (1). Same results.
4) Tried sending data to ACTUAL 2011.FEB - success.
5) Tried copying data from ACTUAL 2011.JAN to other periods - success.
6) Tried to move ACTUAL 2011.JAN data - failed. The current members are locked.
Work status is not activate in our instance.
Thank you.

Hi Connie,
You will need your IT help desk to look at the database table called
lck<YourAppName>
in your AppSet database.
You will need to clear/delete all the records appearing in that above table.
Once that is done you should be good to go.
Thanks,
John

When I attempt to Extend a PDF document via my LiveCycle server I get the error"Application Alert" The file could not be saved. Are you sure you want to lose your results?

When I attempt to Extend a PDF document via my LiveCycle server I get the error"Application Alert" The file could not be saved. Are you sure you want to lose your results?
I can login fine via this address.
http://[Server Address]:[Port Number]/ReaderExtensions
And I can apply the extension successfully, but when I attempt to download I receive the error above.
Application Alert" The file could not be saved. Are you sure you want to lose your results?

Please check the supported version of flash player on your client machine for LiveCycle : http://bit.ly/1wGD9t4
Upgrade or downgrade it accordingly.
Thanks,
Wasil

Saveing space are locked - Speicherplatz blockiert

Similar Messages

Maybe you are looking for