SaveXML Document_Lines Twice

Dear everyone,
I already applied the PL 12 on SBO 2005A. But, when i execute the DI SaveXml(). It still has two document lines node. How could i solve it??
Regards,
Kit

Hi
Apply patch 12 for SP1 and not SP00. Apply the DI component also.
We experienced the same problem and after applying patch 12 for SP1, including the DI object, the problem was resolved.
Regards
John

Similar Messages

PTax ded Twice incase of WPBP SPLIT (Mid month Transfer)

Hi Friends:
In SAP, whenever an Employee transfers from one state to another then system deducts P Tax Twice in that Payroll Period and this is a standard behaviour. (Due to two Splits and two regions)
Ex: 1- 15 in MH and 16 to 30 in AP then P tax of MH is deducted for 1-15 days GROSS and P Tax of AP deducted for GROSS on 16 to 30.
Now, i want to deduct only the P Tax for the Last split record in that Payroll Period. That is P tax for Extire GROSS to be deducted based on AP Region slab.
Has anyone faced this scenario/ issue. Any Exits/ BADI's available to achieve this?
regards,
Srikanth

Hi
If you want to differ from the standard calculation then you can use the BADI
HR_IN_CALC_PTX_BASIS
Regards
Sumit Pradhan

Got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?

got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?

If it's showing the red disabled screen due to incorrect passcodes then you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad via your computer's iTunes and restore/resync your content to it

I'm on ff 3.5.5 for Mac. I've been prompted twice to download latest version. Each time I have dragged the ff icon from applications folder to the dock and all seems ok. But next time I start ff it says I'm on 3.5.5 and should update to latest version!

There was no "update failed" message
I wonder whether I'm doing the right thing when I drag to the dock. There's only one ff icon in the applications folder. The first time I was prompted to update it showed that days date next to the icon as if the update was successful. The second time was a few days later but I think it was still the same date next to the icon (25/8/10) I've only just noticed that (on 10/9/10) so can't be sure but I'm sure the second time was around 2nd or 3rd of Sept.
Also, I am running two versions of ff- one is english, the other is the Italian version. They can't be opened at the same time but they seem to talk to eachother in the background, so to speak, because when I open one after a long gap, it opens with all the history and settings of the other one, right up to the last website I went to. I think I closed both when updating because it prompts you to close all programmes and restart (I think/ remember) so I just clicked ok to that prompt.
By the way, I got the prompt to update twice for ''BOTH'' the Italian and the English version- so 4 times altogether so it would seem that ff does recognise them as separate but still has problems concluding the update for each separate one respectively.
Thank you very much if you can help.
Trapperjohn

Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
Trash the current Firefox application to do a clean reinstall.
Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Brand New MacB Air and i haven't been able to get passed the format which has had to be done twice because, I have a French Numeric Keyboard and Language in English. The minute I type in my password, the keyboard gives me letters that i did NOT type.

I live in Switzerland and can only buy a Mac Air with a French or German keyboard, no chance to buy an English keyboard Mac here,. When setting up I chose the French numerique keyboard, although there are two choices French or French numerique. I put in my language as English. When all was set up I came to the start page and had to put in my password, by the grace of g....I just happened to see the first letter I typed before it turned into a dot. My password which was supposed to start with the number 2 showed a french e with accent before it quikly became a dot.
Because of the dot system, this meant that I had no clue what the keyboard was typing as my password ...........and true enough my password was not accepted despite my trying all combinations. I have had to reformat twice now thanks to Apple Chat and both times my password was not accepted. I am in the process of formatting it again, this time on my own. If the Start page does not accept my password again this can only mean that the Mac left the factory with faults. I could not be more disappointed with the money spent and the time and trouble that Apple Chat and I have spent in trying to correct a brand new out of the box Mac. I have a cheap Toshiba laptop also with a french keyboard and english language which gave me no trouble at all. I am not impressed with the so called King of computers! First of all the dot system is daft. People want to be able to see and confirm their passwords before they are set for good. Second, this problem is going to give me a lot of grief. Switzerland business is not renowned for its after sales service or the time it takes to do repairs. When I had an issue with my Vaio laptop which was still under warranty, they kindly picked it up from my house, repaired and promptly returned it. How's that for good proper service.

i didn't read a lot of your 2nd paragraph, but it seems like the password is the issue, right?
do a true clean install
reboot your machine and hold down command+option+r, you should see a spinning globe - if you don't see the globe or anything that reads internet recovery, shut down and try again
at menu, chose disk utility and once there, find your HD on the left side, select the physical name and erase it as mac journaled
exit disk utlity
at menu, choose install OSX
this time, when it asks for a password just hit continue, it will let you complete without a password
you should be able to get into your laptop, now figure out what password you'll be able to use with your kb issue

In ALV Report output heading is printing twice.

Hi Experts,
Im working on ALV Reports.
Im printing header text by using listheader and commentary write function module.
the problem is when i sort any column in ALV ouput the heading is printing twice.
Again if i sort the column the heading is printed is 4 times.
so if anybody knows the solution how we can avoid repetition of heading ,
Please reply me as soon as possible.
regards
Imrangs.

Hi Noorie,
Thanks a lot.
Your answer is perfect.
Bye.
Regards,
Imran

I have multiple devices in my family. Each of us has an iPhone and an iPad. Is there a way for each of us to have our own Apple ID but one account so we can all get the same music, movies, books, etc. I can't see paying twice for something in the same fam

I have multiple devices in my family. Each of us has an iPhone and an iPad. Is there a way for each of us to have our own Apple ID but one account so we can all get the same music, movies, books, etc. I can't see paying twice for something in the same family.

Welcome to the world of digital media. Your can't really transfer it. I don't know what the rules are about transferring to your spouse but I do know that in some cases when you die, your heirs cannot inherit your digital media. This is why there is still an advantage to buying the CD since the usage rights belong to whomever holds the physical media.
A possible workaround is to burn the songs to a music CD with yout account (tracks only without song titles) and then having your wife upload it as a regular music CD onto her account. It's been a while since i've done this so I'm not sure if it would work now.
Please note that I'm not advocating copyright and/or TOS violations. I'm only suggesting ways to copy music for your own personal use which has traditonally been permitted. I only did this because I wanted to convert iTunes songs to mp3 files so I could burn them onto a data CD for use in my car. It would make sense that since married couples are a joint entity, this would be personal use.
Also, I'm not a lawyer so don't take this as legal advice.

My iPod Touch is running on ios 7. In the last two and a half months all the apps of my iPod have been wiped out twice. I had to download all the apps all over again. Why is this happening?

My iPod Touch is running on ios 7. In the last two and a half all the apps of my iPod have been suddenly wiped out twice. I had to download all the apps all over again. Why has it happened?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there. I've uninstalled iTunes and reinstalled twice and it's not working. Please help.

I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there. I've uninstalled iTunes and reinstalled twice and it's not working. Please help.

I have not had wifi since November when I upgraded to the newest IOS version. I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again. I kept doing what they told me and it worked for a couple more days and then I could never turn it on again. My blue tooth doesn't work either. I had to actually increase my data usage with AT&T becuase of this. When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue. My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!! I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue. Who knows how many people out there have had this issue and have not said anything about it. Now there is a newer update that I can't do because it requires wifi in order to download.
June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple.

SCCM 2012 SP1 - Software Center appears twice in Start Menu

Hi guys,
i just finished implementing a fresh SCCM 2012 SP1 Installation for a customer. The whole OSD works like a charm (except some issues with the latest Windows updates breaking the whole OSD, will open a separate thread for this soon), but after the deployment
the Software Center is appearing twice in the Start Menu (We're using Win7 Enterprise SP1 x86 English with 5 integrated language packs). I first thought this has something to do with the integrated language packs, but both Start Menu entries
are always in the same language.
The strange Thing is, that one entry for the SCCM Software Center is called "Software Center" and the other one "SoftwareCenter" (without a space). We configured 2 Client policies, one with EP-enabled and one without EP. We
deployed the Client Settings to different collections so i don't think that this is causing the Problem?Do you guys have any idea why this is Happening?
Has anyone ever seen this? See a screenshot below:
Thank you.
Cheers
Stefan

Thanks for your Response Thomas.
I don't think it is related to the upgrade to SP1.I think it might be a General issue in SP1. I started with a fresh SCCM 2012 SP1 Installation and i also have 2 Software Center entries in my start menu. If i check the shortcut i can see that one shortcut
was created when i captured my base Image, the other one was created during the Install OS Task Sequence.

TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

- After charging for 1/2 hour or so, does iTunes see the iPod? If yes, restore the iPod from backup.
- If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

SLiM only starts twice then exits to tty1

Hi... i've installed arch yesterday following this guide https://wiki.archlinux.org/index.php/Beginners'_Guide i
After that i started to set up a new desktop using openbox and slim.
Basically everything works fine... except that after exiting openbox 2 times slim won't start and i end at tty1.
systemctl status slim... after boot
slim.service - SLiM Simple Login Manager
Loaded: loaded (/usr/lib/systemd/system/slim.service; enabled)
Active: active (running) since Di 2013-03-19 19:05:10 CET; 1min 10s ago
Main PID: 241 (slim)
CGroup: name=systemd:/system/slim.service
└─264 /usr/bin/X -nolisten tcp vt07 -auth /var/run/slim.auth
‣ 241 /usr/bin/slim -nodaemon
... after 1st "openbox logout"
slim.service - SLiM Simple Login Manager
Loaded: loaded (/usr/lib/systemd/system/slim.service; enabled)
Active: active (running) since Di 2013-03-19 19:05:10 CET; 1min 50s ago
Main PID: 241 (slim)
CGroup: name=systemd:/system/slim.service
...after 2nt logout on tty1
slim.service - SLiM Simple Login Manager
Loaded: loaded (/usr/lib/systemd/system/slim.service; enabled)
Active: failed (Result: exit-code) since Di 2013-03-19 19:07:04 CET; 23s ago
Process: 241 ExecStart=/usr/bin/slim -nodaemon (code=exited, status=1/FAILURE)
/var/log/slim.log
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
systemctl list-units
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys...t_misc.automount loaded active running Arbitrary Executable File Formats File System Automount Point
sys-devi...-sda-sda1.device loaded active plugged IC25N080ATMR04-0
sys-devi...-sda-sda2.device loaded active plugged IC25N080ATMR04-0
sys-devi...-sda-sda3.device loaded active plugged IC25N080ATMR04-0
sys-devi...-sda-sda4.device loaded active plugged IC25N080ATMR04-0
sys-devi...block-sda.device loaded active plugged IC25N080ATMR04-0
sys-devi...block-sr0.device loaded active plugged _NEC_DVD+_-RW_ND-6500A
sys-devi...und-card0.device loaded active plugged /sys/devices/pci0000:00/0000:00:02.7/sound/card0
sys-devi...et-enp0s4.device loaded active plugged /sys/devices/pci0000:00/0000:00:04.0/net/enp0s4
sys-devi...et-wlp2s0.device loaded active plugged /sys/devices/pci0000:00/0000:00:09.0/0000:02:00.0/net/wlp2s0
sys-devi...tty-ttyS0.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS0
sys-devi...tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devi...tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devi...tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-module-configfs.device loaded active plugged /sys/module/configfs
sys-subs...es-enp0s4.device loaded active plugged /sys/subsystem/net/devices/enp0s4
sys-subs...es-wlp2s0.device loaded active plugged /sys/subsystem/net/devices/wlp2s0
-.mount loaded active mounted /
boot.mount loaded active mounted /boot
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
home.mount loaded active mounted /home
proc-sys...infmt_misc.mount loaded active mounted Arbitrary Executable File Formats File System
sys-kernel-config.mount loaded active mounted Configuration File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted Temporary Directory
systemd-...ord-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-...ssword-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
dbus.service loaded active running D-Bus System Message Bus
[email protected] loaded active running Getty on tty1
net-auto-wireless.service loaded active running Provides automatic netcfg wireless connection
ntpd.service loaded active running Network Time Service
slim.service loaded failed failed SLiM Simple Login Manager
systemd-binfmt.service loaded active exited Set Up Additional Binary Formats
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-...es-setup.service loaded active exited Recreate Volatile Files and Directories
systemd-...-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-...sessions.service loaded active exited Permit User Sessions
systemd-...le-setup.service loaded active exited Setup Virtual Console
dbus.socket loaded active running D-Bus System Message Bus Socket
dmeventd.socket loaded active listening Device-mapper event daemon FIFOs
lvmetad.socket loaded active listening LVM2 metadata daemon socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-...d-control.socket loaded active listening udev Control Socket
systemd-udevd-kernel.socket loaded active running udev Kernel Socket
dev-sda2.swap loaded active active /dev/sda2
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
network.target loaded active active Network
remote-fs.target loaded active active Remote File Systems
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
systemd-...iles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
/etc/slim.conf
# Path, X server and arguments (if needed)
# Note: -xauth $authfile is automatically appended
default_path /bin:/usr/bin:/usr/local/bin
default_xserver /usr/bin/X
xserver_arguments -nolisten tcp vt07
# Commands for halt, login, etc.
halt_cmd /sbin/shutdown -h now
reboot_cmd /sbin/shutdown -r now
console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
#suspend_cmd /usr/sbin/suspend
# Full path to the xauth binary
xauth_path /usr/bin/xauth
# Xauth file for server
authfile /var/run/slim.auth
# Activate numlock when slim starts. Valid values: on|off
# numlock on
# Hide the mouse cursor (note: does not work with some WMs).
# Valid values: true|false
# hidecursor false
# This command is executed after a succesful login.
# you can place the %session and %theme variables
# to handle launching of specific commands in .xinitrc
# depending of chosen session and slim theme
# NOTE: if your system does not have bash you need
# to adjust the command according to your preferred shell,
# i.e. for freebsd use:
# login_cmd exec /bin/sh - ~/.xinitrc %session
login_cmd exec /bin/bash -login ~/.xinitrc %session
# Commands executed when starting and exiting a session.
# They can be used for registering a X11 session with
# sessreg. You can use the %user variable
# sessionstart_cmd some command
# sessionstop_cmd some command
# Start in daemon mode. Valid values: yes | no
# Note that this can be overriden by the command line
# options "-d" and "-nodaemon"
# daemon yes
# Available sessions (first one is the default).
# The current chosen session name is replaced in the login_cmd
# above, so your login command can handle different sessions.
# see the xinitrc.sample file shipped with slim sources
# sessions xfce4,icewm-session,wmaker,blackbox
# Executed when pressing F11 (requires imagemagick)
screenshot_cmd import -window root /slim.png
# welcome message. Available variables: %host, %domain
welcome_msg Welcome to %host
# Session message. Prepended to the session name when pressing F1
# session_msg Session:
# shutdown / reboot messages
shutdown_msg The system is halting...
reboot_msg The system is rebooting...
# default user, leave blank or remove this line
# for avoid pre-loading the username.
# default_user simone
# Focus the password field on start when default_user is set
# Set to "yes" to enable this feature
# focus_password no
# Automatically login the default user (without entering
# the password. Set to "yes" to enable this feature
#auto_login no
# current theme, use comma separated list to specify a set to
# randomly choose from
current_theme default
# Lock file
lockfile /var/run/lock/slim.lock
# Log file
logfile /var/log/slim.log
When i run "systemctl start slim" on tty1 slim starts again and after exiting openbox twice i'm back on tty1.
...But when i run "slim" on tty1 slim starts and i can exit openbox as often as i want.
Any ideas ?
Edit:
Running /usr/bin/slim from tty1 gives me this logfile.
/var/log/slim.log
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
Somehow the second "slim: waiting for X server to shut down" does not happen when running "systemctl start slim"
Last edited by Synth (2013-03-19 19:39:10)

Ok, I was able to workaround parts of the bug:
I changed slim.conf and and set daemon = true (so slim runs as a daemon). Furthermore changed the slim.service file for systemd:
[Service]
Type = forking
PIDFile = /var/lock/slim.lock
ExecStart=/usr/bin/slim
Now I can log in and out as often as I want. Seems to work. However, nm-applet only shows up in odd numbers of logins:
1st login --> nm-applet is shown
2nd login --> nm-applet is not shown (but running --> htop)
3rd login --> nm-applet is shown
4th login --> nm-applet is not shown (but running --> htop)
...and so on...
I search the web, it seems to be a problem with dbus and the order how the services get started. Don't know if that is true...any ideas from anyone?

Subtype event not triggering and supertype event triggers twice!!!!!!

Hi,
We have created a subtype for object bus2030 and also an event created for that. My workflow should trigger whenever an inquiry is created.
I've maintained this as triggering event in SWDD and done type linkage is SWE2 and everything looks fine.
When i simulate or create event the WF is triggered but when create inquiry in VA11 WF does not triggers.
I've checked SWEL for event trace but no event is triggered at all... Am i missing something... I've done almost everything that i used to do...
Even synchronized buffer!!! nothing paid me a solution...
Infact the same was working with 3.1i system but after migration to ECC6 we had to create new WF template for the same Process.
Now I also see that the supertype bus2030-created event is triggered twice but, obviously no receiver type exists. But the zbus2030 event is not being triggered at all!!!!
Kindly help me understanding my mistake...
Regards,
PB

Hope you have already set the deletegation in SWO6.
Now, event dont get triggered automatically, jus because they are defined in object. They have to be explicitly published in thesystem.
Check for a suitable user exit in your transaction, which makes use of function module to create the event, from that you know how to proceed.
If you dont find user exit, try other triggering techniques such as change documents, logistics, BTEs... etc.
regards,
Sandeep Josyula

I have an iPad 2 and all of a sudden I have no sound in game apps. I have usual volume in videos and YouTube, I do get volume for games if I plug in headphones. I have switched to screen lock off and on again and I have also done a reset twice.....help :)

I have an ipad2 and all of a sudden I have stopped getting sound in my game apps. I get normal sound on YouTube and I player and downloaded DVDs. If I plug headphones in then I can get sounds for the games. I have switched the lock screen button off and on again and done a reset twice, can anyone help me with this?

Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
 Cheers, Tom

Application error happening at least twice a day. Faulting applicaiton name: wmiprvse.exe

We're experiencing an issue with one of our Windows Server 2008R2 Standard Edition SP1 servers where an Application error occurs at least twice, and sometimes up to 5 or 6 times per day. The following error is what we see. Any help would be greatly
appreciated, and I'll be checking back frequently to check for updates and provide more info whenever needed. Thanks!
General:
Faulting application name: wmiprvse.exe, version: 6.1.7601.17514, time stamp: 0x4ce79d42
Faulting module name: ntdll.dll, version: 6.1.7601.17514, time stamp: 0x4ce7c8f9
Exception code: 0xc0000374
Fault offset: 0x00000000000c40f2
Faulting process id: 0x1bbc
Faulting application start time: 0x01cd5d65dbeb2e7c
Faulting application path: C:\Windows\system32\wbem\wmiprvse.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2012-07-09T08:34:39.000000000Z
EventRecordID
6812
Channel
Application
Computer
{FQDN}
Security
EventData
wmiprvse.exe
6.1.7601.17514
4ce79d42
ntdll.dll
6.1.7601.17514
4ce7c8f9
c0000374
00000000000c40f2
1bbc
01cd5d65dbeb2e7c
C:\Windows\system32\wbem\wmiprvse.exe
C:\Windows\SYSTEM32\ntdll.dll
ebe1621c-c9a0-11e1-a1d4-5cf3fce8cef6
ETA: I also ran the wmidiag.exe tool from Microsoft. I saw it as a suggestion on another forum and ran it. I don't know if it has any bearing here, but this is the log in case it's helpful
show
06604 14:51:25 (0) ** WMIDiag v2.1 started on Tuesday, July 10, 2012 at 14:40.
06605 14:51:25 (0) **
06606 14:51:25 (0) ** Copyright (c) Microsoft Corporation. All rights reserved - July 2007.
06607 14:51:25 (0) **
06608 14:51:25 (0) ** This script is not supported under any Microsoft standard support program or service.
06609 14:51:25 (0) ** The script is provided AS IS without warranty of any kind. Microsoft further disclaims all
06610 14:51:25 (0) ** implied warranties including, without limitation, any implied warranties of merchantability
06611 14:51:25 (0) ** or of fitness for a particular purpose. The entire risk arising out of the use or performance
06612 14:51:25 (0) ** of the scripts and documentation remains with you. In no event shall Microsoft, its authors,
06613 14:51:25 (0) ** or anyone else involved in the creation, production, or delivery of the script be liable for
06614 14:51:25 (0) ** any damages whatsoever (including, without limitation, damages for loss of business profits,
06615 14:51:25 (0) ** business interruption, loss of business information, or other pecuniary loss) arising out of
06616 14:51:25 (0) ** the use of or inability to use the script or documentation, even if Microsoft has been advised
06617 14:51:25 (0) ** of the possibility of such damages.
06618 14:51:25 (0) **
06619 14:51:25 (0) **
06620 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06621 14:51:25 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
06622 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06623 14:51:25 (0) **
06624 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06625 14:51:25 (0) ** Windows Server 2008 R2 - Service pack 1 - 64-bit (7601) - User {Username} on computer {ComputerName}.
06626 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06627 14:51:25 (0) ** Environment: ........................................................................................................ OK.
06628 14:51:25 (0) ** System drive: ....................................................................................................... C: (Disk #0 Partition #1).
06629 14:51:25 (0) ** Drive type: ......................................................................................................... SCSI (IBM ServeRAID M5015 SCSI Disk Device).
06630 14:51:25 (0) ** There are no missing WMI system files: .............................................................................. OK.
06631 14:51:25 (0) ** There are no missing WMI repository files: .......................................................................... OK.
06632 14:51:25 (0) ** WMI repository state: ............................................................................................... CONSISTENT.
06633 14:51:25 (0) ** AFTER running WMIDiag:
06634 14:51:25 (0) ** The WMI repository has a size of: ................................................................................... 90 MB.
06635 14:51:25 (0) ** - Disk free space on 'C:': .......................................................................................... 75295 MB.
06636 14:51:25 (0) ** - INDEX.BTR, 15818752 bytes, 7/10/2012 2:38:58 PM
06637 14:51:25 (0) ** - MAPPING1.MAP, 242388 bytes, 7/10/2012 2:33:33 PM
06638 14:51:25 (0) ** - MAPPING2.MAP, 242388 bytes, 7/10/2012 2:38:58 PM
06639 14:51:25 (0) ** - OBJECTS.DATA, 77570048 bytes, 7/10/2012 2:38:58 PM
06640 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06641 14:51:25 (2) !! WARNING: Windows Firewall: .......................................................................................... DISABLED.
06642 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06643 14:51:25 (0) ** DCOM Status: ........................................................................................................ OK.
06644 14:51:25 (0) ** WMI registry setup: ................................................................................................. OK.
06645 14:51:25 (0) ** INFO: WMI service has dependents: ................................................................................... 1 SERVICE(S)!
06646 14:51:25 (0) ** - Internet Connection Sharing (ICS) (SHAREDACCESS, StartMode='Disabled')
06647 14:51:25 (0) ** => If the WMI service is stopped, the listed service(s) will have to be stopped as well.
06648 14:51:25 (0) ** Note: If the service is marked with (*), it means that the service/application uses WMI but
06649 14:51:25 (0) ** there is no hard dependency on WMI. However, if the WMI service is stopped,
06650 14:51:25 (0) ** this can prevent the service/application to work as expected.
06651 14:51:25 (0) **
06652 14:51:25 (0) ** RPCSS service: ...................................................................................................... OK (Already started).
06653 14:51:25 (0) ** WINMGMT service: .................................................................................................... OK (Already started).
06654 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06655 14:51:25 (0) ** WMI service DCOM setup: ............................................................................................. OK.
06656 14:51:25 (0) ** WMI components DCOM registrations: .................................................................................. OK.
06657 14:51:25 (0) ** WMI ProgID registrations: ........................................................................................... OK.
06658 14:51:25 (0) ** WMI provider DCOM registrations: .................................................................................... OK.
06659 14:51:25 (0) ** WMI provider CIM registrations: ..................................................................................... OK.
06660 14:51:25 (0) ** WMI provider CLSIDs: ................................................................................................ OK.
06661 14:51:25 (2) !! WARNING: Some WMI providers EXE/DLL file(s) are missing: ............................................................ 18 WARNING(S)!
06662 14:51:25 (0) ** - ROOT/QLOGIC_CMPI, QLogic_NIC_Provider, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{28A5F598-F699-4A6B-B9F9-8C7EB9B7359F}:QLogic_NIC_Provider
06663 14:51:25 (0) ** - ROOT/QLOGIC_CMPI, QLogic_FCHBA_Provider, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{0AE588DD-D2E9-41EB-BCD1-8BF474187EC5}:QLogic_FCHBA_Provider
06664 14:51:25 (0) ** - ROOT/IBMSD, ADPT_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{B007445E-6AF0-4CBD-9009-809F071FCE69}:ADPT_Module
06665 14:51:25 (0) ** - ROOT/IBMSD, IBM_PA_Providers, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{2244E0FA-D37A-4F6E-82FB-92F1DB78716D}:IBM_PA_Providers
06666 14:51:25 (0) ** - ROOT/IBMSD, EndpointRegistrationProviderModule, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{BF833E81-33AA-40ED-B74A-329F006DB4F8}:EndpointRegistrationProviderModule
06667 14:51:25 (0) ** - ROOT/CIMV2, SBLIM_Data_Gatherer, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{0D03AF80-A160-44EF-9E8B-318201F41693}:SBLIM_Data_Gatherer
06668 14:51:25 (0) ** - ROOT/ADPT, ADPT_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{B007445E-6AF0-4CBD-9009-809F071FCE69}:ADPT_Module
06669 14:51:25 (0) ** - ROOT/PG_INTEROP, SBLIM_Data_Gatherer, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{0D03AF80-A160-44EF-9E8B-318201F41693}:SBLIM_Data_Gatherer
06670 14:51:25 (0) ** - ROOT/PG_INTEROP, LSIESG_SMIS13_HHR_ProviderModule, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{E21064DD-757A-4F2D-B798-81CDFF03B48C}:LSIESG_SMIS13_HHR_ProviderModule
06671 14:51:25 (0) ** - ROOT/PG_INTEROP, emulex_fc_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{27734403-1E6C-4BC7-B97D-1FE9657B35EC}:emulex_fc_provider_Module
06672 14:51:25 (0) ** - ROOT/PG_INTEROP, emulex_ucna_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{68D3C192-F517-41CC-B852-BA74A8D05A85}:emulex_ucna_provider_Module
06673 14:51:25 (0) ** - ROOT/IBMSE, emulex_fc_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{27734403-1E6C-4BC7-B97D-1FE9657B35EC}:emulex_fc_provider_Module
06674 14:51:25 (0) ** - ROOT/IBMSE, IBM_PA_Providers, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{2244E0FA-D37A-4F6E-82FB-92F1DB78716D}:IBM_PA_Providers
06675 14:51:25 (0) ** - ROOT/IBMSE, emulex_ucna_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{68D3C192-F517-41CC-B852-BA74A8D05A85}:emulex_ucna_provider_Module
06676 14:51:25 (0) ** - ROOT/LSI_MR_1_3_0, LSIESG_SMIS13_HHR_ProviderModule, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{E21064DD-757A-4F2D-B798-81CDFF03B48C}:LSIESG_SMIS13_HHR_ProviderModule
06677 14:51:25 (0) ** - ROOT/EMULEX, emulex_fc_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{27734403-1E6C-4BC7-B97D-1FE9657B35EC}:emulex_fc_provider_Module
06678 14:51:25 (0) ** - ROOT/EMULEX, emulex_ucna_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{68D3C192-F517-41CC-B852-BA74A8D05A85}:emulex_ucna_provider_Module
06679 14:51:25 (0) ** - ROOT/BROCADE, brcdprovider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{48898EFD-0F9A-4657-B03D-FF400A7D2CDE}:brcdprovider_Module
06680 14:51:25 (0) ** => This will make any operations related to the WMI class supported by the provider(s) to fail.
06681 14:51:25 (0) ** This can be due to:
06682 14:51:25 (0) ** - the de-installation of the software.
06683 14:51:25 (0) ** - the deletion of some files.
06684 14:51:25 (0) ** => If the software has been de-installed intentionally, then this information must be
06685 14:51:25 (0) ** removed from the WMI repository. You can use the 'WMIC.EXE' command to remove
06686 14:51:25 (0) ** the provider registration data.
06687 14:51:25 (0) ** i.e. 'WMIC.EXE /NAMESPACE:\\ROOT\BROCADE path __Win32Provider Where Name='brcdprovider_Module' DELETE'
06688 14:51:25 (0) ** => If not, you must restore a copy of the missing provider EXE/DLL file(s) as indicated by the path.
06689 14:51:25 (0) ** You can retrieve the missing file from:
06690 14:51:25 (0) ** - A backup.
06691 14:51:25 (0) ** - The Windows CD.
06692 14:51:25 (0) ** - Another Windows installation using the same version and service pack level of the examined system.
06693 14:51:25 (0) ** - The original CD or software package installing this WMI provider.
06694 14:51:25 (0) **
06695 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06696 14:51:25 (0) ** INFO: User Account Control (UAC): ................................................................................... DISABLED.
06697 14:51:25 (0) ** INFO: Local Account Filtering: ...................................................................................... ENABLED.
06698 14:51:25 (0) ** => WMI tasks remotely accessing WMI information on this computer and requiring Administrative
06699 14:51:25 (0) ** privileges MUST use a DOMAIN account part of the Local Administrators group of this computer
06700 14:51:25 (0) ** to ensure that administrative privileges are granted. If a Local User account is used for remote
06701 14:51:25 (0) ** accesses, it will be reduced to a plain user (filtered token), even if it is part of the Local Administrators group.
06702 14:51:25 (0) **
06703 14:51:25 (0) ** Overall DCOM security status: ....................................................................................... OK.
06704 14:51:25 (0) ** Overall WMI security status: ........................................................................................ OK.
06705 14:51:25 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
06706 14:51:25 (0) ** INFO: WMI permanent SUBSCRIPTION(S): ................................................................................ 2.
06707 14:51:25 (0) ** - ROOT/SUBSCRIPTION, CommandLineEventConsumer.Name="BVTConsumer".
06708 14:51:25 (0) ** 'SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99'
06709 14:51:25 (0) ** - ROOT/SUBSCRIPTION, NTEventLogEventConsumer.Name="SCM Event Log Consumer".
06710 14:51:25 (0) ** 'select * from MSFT_SCMEventLogEvent'
06711 14:51:25 (0) **
06712 14:51:25 (0) ** WMI TIMER instruction(s): ........................................................................................... NONE.
06713 14:51:25 (0) ** INFO: WMI namespace(s) requiring PACKET PRIVACY: .................................................................... 3 NAMESPACE(S)!
06714 14:51:25 (0) ** - ROOT/CIMV2/SECURITY/MICROSOFTTPM.
06715 14:51:25 (0) ** - ROOT/CIMV2/TERMINALSERVICES.
06716 14:51:25 (0) ** - ROOT/SERVICEMODEL.
06717 14:51:25 (0) ** => When remotely connecting, the namespace(s) listed require(s) the WMI client to
06718 14:51:25 (0) ** use an encrypted connection by specifying the PACKET PRIVACY authentication level.
06719 14:51:25 (0) ** (RPC_C_AUTHN_LEVEL_PKT_PRIVACY or PktPrivacy flags)
06720 14:51:25 (0) ** i.e. 'WMIC.EXE /NODE:"{ComputerName}" /AUTHLEVEL:Pktprivacy /NAMESPACE:\\ROOT\SERVICEMODEL Class __SystemSecurity'
06721 14:51:25 (0) **
06722 14:51:25 (0) ** WMI MONIKER CONNECTIONS: ............................................................................................ OK.
06723 14:51:25 (0) ** WMI CONNECTIONS: .................................................................................................... OK.
06724 14:51:25 (1) !! ERROR: WMI GET operation errors reported: ........................................................................... 30 ERROR(S)!
06725 14:51:25 (0) ** - Root/CIMV2, MSFT_NetInvalidDriverDependency, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06726 14:51:25 (0) ** MOF Registration: ''
06727 14:51:25 (0) ** - Root/CIMV2, Win32_OsBaselineProvider, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06728 14:51:25 (0) ** MOF Registration: ''
06729 14:51:25 (0) ** - Root/CIMV2, Win32_OsBaseline, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06730 14:51:25 (0) ** MOF Registration: ''
06731 14:51:25 (0) ** - Root/CIMV2, Win32_DriverVXD, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06732 14:51:25 (0) ** MOF Registration: ''
06733 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06734 14:51:25 (0) ** MOF Registration: ''
06735 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06736 14:51:25 (0) ** MOF Registration: ''
06737 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06738 14:51:25 (0) ** MOF Registration: ''
06739 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06740 14:51:25 (0) ** MOF Registration: ''
06741 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06742 14:51:25 (0) ** MOF Registration: ''
06743 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06744 14:51:25 (0) ** MOF Registration: ''
06745 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06746 14:51:25 (0) ** MOF Registration: ''
06747 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06748 14:51:25 (0) ** MOF Registration: ''
06749 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06750 14:51:25 (0) ** MOF Registration: ''
06751 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06752 14:51:25 (0) ** MOF Registration: ''
06753 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06754 14:51:25 (0) ** MOF Registration: ''
06755 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06756 14:51:25 (0) ** MOF Registration: ''
06757 14:51:25 (0) ** - Root/WMI, ReserveDisjoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06758 14:51:25 (0) ** MOF Registration: ''
06759 14:51:25 (0) ** - Root/WMI, ReserveLateCount, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06760 14:51:25 (0) ** MOF Registration: ''
06761 14:51:25 (0) ** - Root/WMI, ReserveJoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06762 14:51:25 (0) ** MOF Registration: ''
06763 14:51:25 (0) ** - Root/WMI, ReserveDelete, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06764 14:51:25 (0) ** MOF Registration: ''
06765 14:51:25 (0) ** - Root/WMI, ReserveBandwidth, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06766 14:51:25 (0) ** MOF Registration: ''
06767 14:51:25 (0) ** - Root/WMI, ReserveCreate, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06768 14:51:25 (0) ** MOF Registration: ''
06769 14:51:25 (0) ** - Root/WMI, SystemConfig_PhyDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06770 14:51:25 (0) ** MOF Registration: ''
06771 14:51:25 (0) ** - Root/WMI, SystemConfig_Video, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06772 14:51:25 (0) ** MOF Registration: ''
06773 14:51:25 (0) ** - Root/WMI, SystemConfig_IDEChannel, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06774 14:51:25 (0) ** MOF Registration: ''
06775 14:51:25 (0) ** - Root/WMI, SystemConfig_NIC, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06776 14:51:25 (0) ** MOF Registration: ''
06777 14:51:25 (0) ** - Root/WMI, SystemConfig_Network, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06778 14:51:25 (0) ** MOF Registration: ''
06779 14:51:25 (0) ** - Root/WMI, SystemConfig_CPU, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06780 14:51:25 (0) ** MOF Registration: ''
06781 14:51:25 (0) ** - Root/WMI, SystemConfig_LogDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06782 14:51:25 (0) ** MOF Registration: ''
06783 14:51:25 (0) ** - Root/WMI, SystemConfig_Power, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06784 14:51:25 (0) ** MOF Registration: ''
06785 14:51:25 (0) ** => When a WMI performance class is missing (i.e. 'Win32_PerfRawData_TermService_TerminalServices'), it is generally due to
06786 14:51:25 (0) ** a lack of buffer refresh of the WMI class provider exposing the WMI performance counters.
06787 14:51:25 (0) ** You can refresh the WMI class provider buffer with the following command:
06788 14:51:25 (0) **
06789 14:51:25 (0) ** i.e. 'WINMGMT.EXE /SYNCPERF'
06790 14:51:25 (0) **
06791 14:51:25 (0) ** WMI MOF representations: ............................................................................................ OK.
06792 14:51:25 (0) ** WMI QUALIFIER access operations: .................................................................................... OK.
06793 14:51:25 (0) ** WMI ENUMERATION operations: ......................................................................................... OK.
06794 14:51:25 (2) !! WARNING: WMI EXECQUERY operation errors reported: ................................................................... 2 WARNING(S)!
06795 14:51:25 (0) ** - Root/CIMV2, 'Select * From Win32_PointingDevice WHERE Status = "OK"' did not return any instance while AT LEAST 1 instance is expected.
06796 14:51:25 (0) ** - Root/CIMV2, 'Select * From Win32_Keyboard' did not return any instance while AT LEAST 1 instance is expected.
06797 14:51:25 (0) **
06798 14:51:25 (2) !! WARNING: WMI GET VALUE operation errors reported: ................................................................... 5 WARNING(S)!
06799 14:51:25 (0) ** - Root, Instance: __EventConsumerProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
06800 14:51:25 (0) ** - Root, Instance: __EventProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
06801 14:51:25 (0) ** - Root, Instance: __EventSinkCacheControl=@, Property: ClearAfter='00000000000015.000000:000' (Expected default='00000000000230.000000:000').
06802 14:51:25 (0) ** - Root, Instance: __ObjectProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
06803 14:51:25 (0) ** - Root, Instance: __PropertyProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
06804 14:51:25 (0) **
06805 14:51:25 (0) ** WMI WRITE operations: ............................................................................................... NOT TESTED.
06806 14:51:25 (0) ** WMI PUT operations: ................................................................................................. NOT TESTED.
06807 14:51:25 (0) ** WMI DELETE operations: .............................................................................................. NOT TESTED.
06808 14:51:25 (0) ** WMI static instances retrieved: ..................................................................................... 2072.
06809 14:51:25 (0) ** WMI dynamic instances retrieved: .................................................................................... 0.
06810 14:51:25 (0) ** WMI instance request cancellations (to limit performance impact): ................................................... 1.
06811 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06812 14:51:25 (0) ** # of Event Log events BEFORE WMIDiag execution since the last 20 day(s):
06813 14:51:25 (0) ** DCOM: ............................................................................................................. 0.
06814 14:51:25 (0) ** WINMGMT: .......................................................................................................... 0.
06815 14:51:25 (0) ** WMIADAPTER: ....................................................................................................... 0.
06816 14:51:25 (0) **
06817 14:51:25 (0) ** # of additional Event Log events AFTER WMIDiag execution:
06818 14:51:25 (0) ** DCOM: ............................................................................................................. 0.
06819 14:51:25 (0) ** WINMGMT: .......................................................................................................... 0.
06820 14:51:25 (0) ** WMIADAPTER: ....................................................................................................... 0.
06821 14:51:25 (0) **
06822 14:51:25 (0) ** 30 error(s) 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found
06823 14:51:25 (0) ** => This error is typically a WMI error. This WMI error is due to:
06824 14:51:25 (0) ** - a missing WMI class definition or object.
06825 14:51:25 (0) ** (See any GET, ENUMERATION, EXECQUERY and GET VALUE operation failures).
06826 14:51:25 (0) ** You can correct the missing class definitions by:
06827 14:51:25 (0) ** - Manually recompiling the MOF file(s) with the 'MOFCOMP <FileName.MOF>' command.
06828 14:51:25 (0) ** Note: You can build a list of classes in relation with their WMI provider and MOF file with WMIDiag.
06829 14:51:25 (0) ** (This list can be built on a similar and working WMI Windows installation)
06830 14:51:25 (0) ** The following command line must be used:
06831 14:51:25 (0) ** i.e. 'WMIDiag CorrelateClassAndProvider'
06832 14:51:25 (0) ** Note: When a WMI performance class is missing, you can manually resynchronize performance counters
06833 14:51:25 (0) ** with WMI by starting the ADAP process.
06834 14:51:25 (0) ** - a WMI repository corruption.
06835 14:51:25 (0) ** In such a case, you must rerun WMIDiag with 'WriteInRepository' parameter
06836 14:51:25 (0) ** to validate the WMI repository operations.
06837 14:51:25 (0) ** Note: ENSURE you are an administrator with FULL access to WMI EVERY namespaces of the computer before
06838 14:51:25 (0) ** executing the WriteInRepository command. To write temporary data from the Root namespace, use:
06839 14:51:25 (0) ** i.e. 'WMIDiag WriteInRepository=Root'
06840 14:51:25 (0) ** - If the WriteInRepository command fails, while being an Administrator with ALL accesses to ALL namespaces
06841 14:51:25 (0) ** the WMI repository must be reconstructed.
06842 14:51:25 (0) ** Note: The WMI repository reconstruction requires to locate all MOF files needed to rebuild the repository,
06843 14:51:25 (0) ** otherwise some applications may fail after the reconstruction.
06844 14:51:25 (0) ** This can be achieved with the following command:
06845 14:51:25 (0) ** i.e. 'WMIDiag ShowMOFErrors'
06846 14:51:25 (0) ** Note: The repository reconstruction must be a LAST RESORT solution and ONLY after executing
06847 14:51:25 (0) ** ALL fixes previously mentioned.
06848 14:51:25 (2) !! WARNING: Static information stored by external applications in the repository will be LOST! (i.e. SMS Inventory)
06849 14:51:25 (0) **
06850 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06851 14:51:25 (0) ** Unexpected, wrong or missing registry key values: ................................................................... 1 KEY(S)!
06852 14:51:25 (0) ** INFO: Unexpected registry key value:
06853 14:51:25 (0) ** - Current: HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ) -> 0
06854 14:51:25 (0) ** - Expected: HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ) -> 1
06855 14:51:25 (0) ** From the command line, the registry configuration can be corrected with the following command:
06856 14:51:25 (0) ** i.e. 'REG.EXE Add "HKLM\SOFTWARE\Microsoft\WBEM\CIMOM" /v "Logging" /t "REG_SZ" /d "1" /f'
06857 14:51:25 (0) **
06858 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06859 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06860 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06861 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06862 14:51:25 (0) **
06863 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06864 14:51:25 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
06865 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06866 14:51:25 (0) **
06867 14:51:25 (0) ** ERROR: WMIDiag detected issues that could prevent WMI to work properly!. Check 'C:\USERS\{Username}\APPDATA\LOCAL\TEMP\WMIDIAG-V2.1_2K8R2.SRV.SP1.64_{ComputerName}_2012.07.10_14.40.25.LOG' for details.
06868 14:51:25 (0) **
06869 14:51:25 (0) ** WMIDiag v2.1 ended on Tuesday, July 10, 2012 at 14:51 (W:103 E:51 S:1).

Following might help
A Wmiprvse.exe process crashes in Windows Server 2008 R2 when you use the WMI interface to query the hardware status on a computer that supports the IPMI standard
http://support.microsoft.com/kb/2280777
I do not represent the organisation I work for, all the opinions expressed here are my own.
This posting is provided "AS IS" with no warranties or guarantees and confers no rights.
I saw this in my googling. Listed as the cause on the hotfix page is the following: "This
problem occurs because the Ipmiprv.dll module leads the Wmiprvse.exe process to crash. This behavior depends on certain hardware sensor types when the sensor is enumerated." The
faulting module for that hotfix is ipmiprv.dll, and our faulting module is ntdll.dll. I'm thinking that this hotfix isn't applicable, but I'm open to hearing why I'm incorrect if I am.
Seth Johnson

SaveXML Document_Lines Twice

Similar Messages

Maybe you are looking for