Saving 1 page changes another page settings

I know that there is an easy solution to my issue. I have a copy of a website that I wanted to duplicate its features.
I have a copy of another website (A) locally that I want to copy. In CS4, I defined a new site, opened a document which I named index. Then I opened a page from site A, copied all the “Style and Layout” settings as well as the code from site A page to my index page. I displayed correctly and I went about changing stuff and once done, I saved the index page with success. Looks good with my changes and I’m happy.
I then created page 2 for my site, and opened a 2nd page from site A that I wanted to create my second page equal too, copied all the above files from 2nd page of site A to my second page for my site. I made all the changes to my page and saved page 2 for my sight.
However, when I opened my index page, my 1st page, the settings that I saved from the 2nd page that I created, changed the settings to my 1st page.
Now, I know that is directly associated with the style and layout css, but, how do I go about saving a page settings without affecting another page settings successfully? I figure it’s a easy step, but, I’m not in the mood after many hours of work.
Thanks for your help if you know the solution to my issue.

All work is local.
OK.
Unfortunately you'll have to make do with the hit-and-miss guesswork already evident in this thread.

Similar Messages

My Mac Book Pro changes the saved home page each time I start Safari. I also get new tabs that randomly open asking to clean up my Apple

My Mac Book Pro changes the saved home page each time I open Safari. I am also getting random tabs opening with various "cleaning up" my computer junk.
How do I get rid of this? I tried some of the fixes listed but they don't seem to work or I am doing something wrong.
THanks
Wendi

You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

I use master password & if I change passwords on a site, it doesn't ask to "change" Also doesn't ask to "remember" with new usernames/passwords. Does anyone know how to fix this or add usernames & passwords to saved password page on Firefox.

Firefox (I think version 5, maybe 4) does not ask to "remember" passwords anymore nor does it ask to "change" a password when I've done that. It didn't ask when I changed my Facebook password & I have to log in each time so I removed my username & password for FB on Firefox's "saved password" page. When I've don't that before, it asks to "remember" but doesn't anymore. I use a master password.

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
To see all History and Cookie settings, choose:
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Deselect: [ ] "Always use private browsing mode"
The website may be using autocomplete=off to prevent Firefox from saving the name and password.
You can remove autocomplete=off with a bookmarklet to make Firefox save the name and password.
*http://kb.mozillazine.org/User_name_and_password_not_remembered
*Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

How can I change the default settings in the new pages?

How can I change the default settings in the new pages?

Create a new document and change the settings to what you want i.e. Times New Roman, 12 pt. and save as a template from the Edit menu. Then go to Pages Preferences (Cmd +,) and under general change the template to open to your saved template that you want as your default setting.
Hope that helps.

Hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a

hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a default settings upon installation in previous editions of adobe reader .i use a windows 8 pc now.thank

For sideloaded content the nook pulls the metadata from ePub file itself. I would suggest looking at a program like Sigil or Calibre that will let you edit the metadata in the book to make it appear like you want.
For the PDF vs ePub - No, that's the way PDFs work (think of them as graphics, not text), wheres ePubs are Web Pages - so no you can't them to behave exactly alike without converting the files.

How to change page settings trying to print 4 photos in 8/11 sheet

Using my I pad wirelessly to hp envy 4500, I don't have the option to change my page settings, any help

Hello Julianoadel,
Welcome to the HP Support Forums!
I see that you are looking to print four pictures onto a 8.5x11 page from your iPad to the ENVY 4500. When printing with an iPad you have very little options to change / adjust when printing, this is caused buy the limitation of AirPrint.
I do now know if this will give you the option to print the four pictures on one page, but it will provide more features and settings for printing, install and use HP ePrint App on the iPad.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

I'm having a problem saving a pages document as another format, like a Word document or PDF file. I've never had this problem in the past. Please help me! I need to have this fixed a.s.a.p.

Hello everyone,
I'm currently having a problem saving a Pages document as another format, such as a Word document or PDF file. I've never had this problem before with Pages. Please help me! I need to have this completed a.s.a.p.
Thanks,
Amy

To save as a PDF, you do that from Print
To save as Wrod format, you export
Allan

In iPhoto '11 I cannot change the book settings. For example, adding page numbers. There is no "option" button as is suggested by the help item.

In iPhoto '11 I cannot change the book settings. For example, adding page numbers. There is no "option" button as is suggested by the help item. How can I change to book settings?

The "options" button should appear at the bottom of the iPhoto window, when you view your book, then the Book Settings Button should be available and you can activate page numbers.
But remember, that the settings available will depend on the Book Theme you selected. The above shows the settings for one of the "Travel" themes. In a Picture Book Theme, e.g. you cannot add page numbers.
What theme and book size are you using?
Regards
Léonie

Changing the Variable Settings in Content Tracker report generation page

I am looking out for Changing the Variable Settings for the Performance Optimization Functions in Content Tracker report generation page. Some options which were available in 10g are not in UCM11g. I got the information that Updating Content Tracker should help, but am unable to locate what are the parameters to be set.
Any pointers on this would be really helpful.
Regards,
Bharat

Hi
From Update Component Configuration these are the options listed that can be changed :
Update Component Configuration
SctUrlMaxLength
SctMaxRecentCount
SctTrackContentAccessOnly
SctProxyNameMaxLength
SctSimplifyUserAgent
SctDoNotPopulateAccessLogColumns
SctDoNotArchive
SctPostReductionExec
SctTrackContentAccessOnly should be unchecked and then test to see if the options get listed .
Thanks
Srinath

How can I change the margin settings in the pages inspector to make them more specific for label templates. I need margins that can be set to hundreths of a centimetre not just tenths.

How can I change the margin settings in the pages inspector to make them more specific for label templates. I need margins that can be set to hundreths of a centimetre not just tenths.

I doubt you need hundreths as you would not even be able to measure that and the printer doesn't hold the paper to those tolerances.
fruhulda is right. Pages accepts higher measure but rounds it in the measure field.
If you want absolute accuarcy you need to set your measures to points. Everything else is being recalculated.
Peter

HT1645 I did step 2 but my computer isn't giving me the pop-up in step 3 so i can't push an OK button. I waited 15+ hours for it to burn and it sent me to this page. I have tried to change the encoding settings again, and it adjusts the capacity but no

I did step 2 in the "iDVD: Setting Encoding preferences" but my computer isn't giving me the pop-up in step 3 so i can't push an OK button in regards to the message. I waited 15+ hours for it to burn and it sent me to this page. I have tried to change the encoding settings again, and it adjusts the capacity but no message pop-up appears.

You can undo your permission changes. Probably the most relevant one is cookies. Try one or both of these methods:
(1) Page Info > Permissions tab
While viewing a page on the site:
* right-click and choose View Page Info > Permissions
* Alt+t (open the classic Tools menu) > Page Info > Permissions
(2) about:permissions
In a new tab, type or paste '''about:permissions''' and press Enter. Allow a few moments for the list on the left to populate, as this information needs to be extracted from a database.
Then type or paste ''rcn''' in the search box above the list to filter it to the most relevant domains. When you highlight a domain, you can adjust its permissions in the right pane.
Any luck?

Export to PDF doesn't retain page settings

Create a report with lots of columns and then change the page settings to be landscape and shrink to fit. Now run the report and print the report as a PDF. It works as expected.
Now export this same report as a PDF. The export will not retain the page settings. Instead, it will export the PDF in portrait and it will not shrink to fit.
If you email the report to someone, it also doesn't retain the page settings.
I opened a TAR on this issue and I was told this was not a current feature of Discoverer. Exporting does not retain page settings by design and it would be an enhancement request to get this new functionality.
We build a lot of custom Oracle Reports right now so that users can drill from one level to another. With OracleBI Discoverer, I can now do this with linking to sheets. With Oracle Reports, I can render the report in PDF format which is a business requirement. With OracleBI Discoverer, I can do this too except I can't export the PDF because it doesn't fit on the page correctly.
Anyone else need this functionality?
On another "enhancement request" note, I would like to be able to schedule exports. OracleBI Discoverer is getting close to providing an alternative to Oracle Reports which is great because it is faster to build and deploy reports and it is licensed by the CPU so I don't have to worry about buying Report Builder licenses. Lastly, business users can build their own reports rather than someone in IT doing it.

ok, here's what I have found out (thanks to our Viewer guru, Matthew):
The print/PDF preferences are currently not saved, so you are right when you say you have to re-apply those settings.
However, there is a way to persist these changes within a session (note that since these changes are session-resident only, you will lose them once you exit Viewer).
The short one line explanation of the workaround is to make the changes using the 'Printable Page' link, generate a 'Preview' or the entire PDF report, and then use the worksheet breadcrumb link to return to the worksheet. This ensures that the PDF changes you made are available during the sesion to the worksheet. You can always undo these settings by clicking the 'Revert to saved' link.
I have posted the same information, but with screenshots, to http://oraclebi.blogspot.com/2005/12/pdf-settings-in-viewer.html
Thanks
Abhinav
Oracle Business Intelligence Product Management
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
Discoverer: http://www.oracle.com/technology/products/discoverer/
BI Beans: http://www.oracle.com/technology/products/bib/
BI Software: http://www.oracle.com/technology/software/products/ias/devuse.html
Documentation: http://www.oracle.com/technology/documentation/appserver1012.html
BI Samples: http://www.oracle.com/technology/products/bi/samples/
OTN Forum: Discoverer
Blog: http://oraclebi.blogspot.com/

ICloud keeps switching off in Pages settings

In the Pages settings on the iDevice I turn on iCloud. I go to Pages; come back to settings and see it switch off. I try to share from Pages to iCloud on the iDevice and it offers sharing to the iDisk, but not to iCloud. I can upload from Pages on the Mac to iWork, and I can upload a Pages document to iWork.com from the iDevice, but I can't get to iWork in iCloud. I'm not sure where in the mess of transferring the hang up is, but the one thing I cannot do is pull a document from iWork or iCloud onto my iDevice.
Thanks.

That to add to your confusion is another way of saving documents from iWork apps (on iOS devices).
By opting to save an iWork document to iTunes, it makes it available in the panel in iTunes you have included an image of. This was actually the prescribed method for moving documents between iOS devices and OSX if one wasn't using iWork beta and before iCloud.
Since my set up is working for me, let me try (by example) to describe how iCloud works:
I work in commercial property, I have from time to time to prepare leases. I may start a lease on my mac, get so far, and do something else. At that point I will upload what I've done to iCloud.com, thereafter I can open it on either of my iPads and continue to work on it. If I work on it on one iPad, I can pick up the second iPad and continue to work where I left off.
If I need to work on the document on my mac, I must then download it from iCloud.com before doing so, and if it isn't finished, I need to upload it again so my iPads see the most recent version, in order to keep working on it.
Whilst doing all this, I will often save the document as I work on it on my iPads to iTunes (I treat this as a back up mechanism, should any of the iCloud syncing go wrong)
Hopefully Apple are working on a way to eliminate the need to upload and download the document to/from OSX and the whole thing will become significantly more useful.
Once a document is completed, I'll file it on my mac and remove it from iCloud.
You may or may not see this a lot more clearly when it works properly for you, right now your problem is that iCloud.com doesn't recognise the iWork apps on your iOS devices. It seems to be a problem that doesn't yet have an answer we can all share with others, although I did have the problem myself and now don't as a result of the procedure I described previously.
What I'd likme to do, is try to discover where your set up might be different to mine and if you did anything differently while following that procedure.
Did you determine whether your iCloud ID is the same as the ID used to purchase the iOS iWork apps.
What did you tell the iOS device device to do with your documents when you turned off iCloud for a particular app.

Saving web pages to a file

Is there any way of saving web pages to a file on the N97?
Most browsers that I know have this functionality, but not the Nokia browser. I installed the Opera browser, which allows you to do this, but as it's impossible to change the default web browser on the N97, you can't use it to open links in messages.
Saving as a bookmark isn't any good, as that only saves the URL, not the page.

coolbelief
that is certainly the way to change the web browser, i had wondered how to do that.
now all i have to do is be adventurous and Change It.
Opera Mobile is so easy to use and works well
settings>Phone>Application sett.>Default apps.>Browsing internet>Web (by default) and you can change it to Opera Mobile (if already installed)
me 3310 6300 N97
son N95 HTC magic
son 6300 N95 E63

I am using the latest Safari. When I open a saved web page, the page is replaced by a grid view of 12 sites I visited. How can I restore the original setting ?

I am using MacBook Air 13 for more than two years. I appears some setting in Safari has been changed unwittingly. Now whenever I open a web-page I have previously saved, the "saved as" page disappears and is replaced by a screen showing in grid view the last 12 pages of sites I have visited. How to restore the setting so that the web page when opened shows the page I have saved.

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

Saving 1 page changes another page settings

Similar Messages

Maybe you are looking for