Saving 6.5 project(with liquify effect) into CS5 = crash?

Hi all.
I've recently upgraded a few machines from AE 6.5 and CS3 to CS5.
There's a project that was done in AE6.5, and now the client is coming back for revision.
I can open the old project in CS5, but when I save it as a new project (even Save as..), AE crashes.
Tried importing the .aep instead of opening directly, no luck also.
It crashes every time when I save.
Then, I tried removing all liquify effect from the project, and now, I can save.
Any clue anybody? Is it official that liquify from 6.5 is not supported by CS5?
(I would like to try saving it from 6.5 > cs3 > cs4 > cs5, but too bad I dont have all the versions.)
Thank you for reading. Any help is much appreciated.

Please file a bug report.
In the meantime, I would recommend prerendering the elements that include the Liquify effect and then removing the Liquify effect before saving.

Similar Messages

Can i export an Imovie project with special effects as a quick time movie then import into final cut express keeping the special effects?

Hi, Can i export an Imovie project with special effects as a quick time movie then import into final cut express keeping the special effects?

Absolutely. Go to File->Export->QuickTime Movie (do NOT use QuickTime Conversion). Make sure you check the Self-Contained box. The export will be an exact copy of your Sequence, complete with any filters or other effects you've added. Import the self-contained movie back into the project (or another project) if needed.
-DH

How do I "round trip" a multi track Audition project with After Effects?

I'm a complete Audition newb and haven't been able to find an answer for this yet. I would like to make an ajustment in my Audition project and then move over to After Effects to hear it paired with the video. Also my voice over track is not in the mix even though it has signal and when I click into the individual cuts I hear it just fine. The voice over is track 2.

I'd need to see a little bit more of the Track Panel for Track 2 to know for sure why it's not included in a mixdown, but the likely cause is the Track Output is not set to Master, but instead was set to a specific output channel on your device.
As for the round-tripping between Au and AE, this process does not appear to be as elegant in After Effects as it is in Premiere Pro. You'll need to export the mixdown of your multitrack session, overwriting the file After Effects is referencing, the re-link it in AE. This would be how I'd approach it:
1. From Audition multitrack, File > Export > Multitrack Mixdown > Entire Session. Create a file in your AE project folder called Audition Mixdown.wav (for example. Best to use uncompressed WAV or AIFF formats at this stage.)
2. Drop this file into your Composition.
3. Make changes to the mix in Audition and either overwrite the original file, or save a new version.
4. In After Effects, right-click the file in your Project panel and choose Replace Footage > File... selecting the updated file.
Since it appears AE loads assets fully into RAM, it doesn't monitor the file on disk for changes and so it doesn't auto-update the asset when it is overwritten by Audition. In Premiere Pro, where the assets are streamed directly from disk, changes saved to the source asset update in the Premiere timeline almost immediately. Perhaps this is a potential workflow optimization we can discuss with the After Effects team to improve this workflow.

I have a FCP event and project with all accompanying media saved on a harddrive. I am now attempting to open the files on another computer that also has FCP X. I cannot figure out how to get it to open.

I have a FCP event and project with all accompanying media saved on a harddrive. I am now attempting to open the files on another computer that also has FCP X. I cannot figure out how to get it to open.

The events and projects folders have to be on the top level of the drive for FCP to recognize them.

I have a problem with the effect gallery and the saving libraries in Illustrator CS6

Hi everybody
I have a problem with the effect gallery and the saving libraries in Illustrator
1. When you go to to effects > effect Gallery the the sketch filter always is black and white. Is this normal? In Photoshop you can set your background and foreground and the sketch effects takes those colors. Is there any way to do this in Illustrator? I have tried changing the colour of the fill and stroke but nothing...
2. In the same area as before effects > effect Gallery .... In Photoshop you can add multiple filters with the create new button. Always is off is there anyway to make it available? or the only way is to by creating several individual ones and manage then in the appearance panel ...
3. I saved a brush library and now it appears in the user defined area so I can get it in any document, that is good but any one knows how to delete a user undefined library?
Many thanks in advance for the help .... I look forward for the reply =)

I see that it is six months ago that I first posted this. Nothing has changed. When I use affixa to create a message with an attachment from my gmail account in firefox, the message is created in drafts, but the gmail window is closed and I have to re-open it. Not critical, but annoying.
Now there is a plug-in on the affixa site that is supposed to be designed for Firefox, and which affixa support claims should take care of this. And I've downloaded it twice. When you download it and open it, it says that it will be installed when Firefox restarts, and gives you a button to restart Firefox. But after you click that button and firefox disappears and re-appears, the affixa plug-in is NOT in the plugin list.
Please, somebody, HELP.

When i burned my rendered project with Nero on DVD, the movie suddenly contains a kind of stroboscoop effect

When i burned my rendered project with Nero on DVD, the movie suddenly contains a kind of stroboscoop effect?? How is this possible?..Playing my project on the pc is not a problem, only when it's burned it suddenly has this kind of stroboscoop effect.
I hope somebody can help me.
Best Regards,
Pascal Theune.

When you play the DVD on your computer, do you see jumpiness?

"Replace with after effects composition" on Premiere gives me a empty AE project...

I'm selecting and right clicking footage from my Premiere timeline, clicking "Replace with after effects composition", and getting a black, empty screen on After Effects.. There is no footage under Project in AE, and the footage I selected on Premiere also became black. .
I'm using the CS5 version of both programs, and video clips from my 7D... What could be wrong?

I am also having this problem. It worked before but now it isn't I did change to Windows 8 recently but I don't know why that would cause it. Here are some pictures to show
Premiere Pro CC and AE CC both updated today, both restared today. You can see the footage is there and PP is reading it. It is an MPEG2 file. easy.
Right Click on replace with after effect comp
AE opens up and I create a new project
Comp is blank. No footage. Lenght is correct though.
If I tab back to Premiere the footage is gone and shows only black.
Please help.

I have hp photo creations and i saved all my projects. now I'm done with them, how do i unsaved it?

i have hp photo creations & saved all my projects, now I'm done with them. How do i unsave them?
This question was solved.
View Solution.

Hi Rocky.
Are you saying you want to delete your projects?
Before you do that, consider saving them to a flash drive or uploading them with the Share button. If you click the "personalize and print" checkbox, you'll be able to print your project again or make changes later. (See image below.)
Our customer support team can help. They're at [email protected]
Thanks for using HP Photo Creations,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

Is it possible to import a saved Pre 10 project into another Pre 10 project?

Is it possible to import a saved Pre 10 project into another Pre 10 project?

You have to Share your first project as, say, DV-AVI and then load that into your new project. The FAQ has more details.
If you need the original project editable in the new, then you will need to buy Clipmate to copy and paste the originals timeline.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Imovie won't let me drag the songs from the music and sound effects into my 'project'... I have tried everything, restarting itunes and imovie, dragging the songs to my desktop and then onto imovie, youtube tutorials...

imovie won't let me drag the songs from the music and sound effects into my 'project'... I have tried everything, restarting itunes and imovie, dragging the songs to my desktop and then onto imovie, youtube tutorials...

Don't drag them, import them from Media.

How can I run two different vi's in same project which are accessing same global variable with out effecting the speed of the execution of both the vi's

Hi
I have build an Labview project with FPGA target . I have configured an FPGA VI and an host Vi to acquire data and logged the data to a file and stored the latest data in a global variable simultanously. I have configured one more VI in the same project to access the global variable. I have build a dll to access both the VI as functions in LabWindows/CVI code. My task in CVI is to update configured GUI with latest data periodically and run the host VI continously for a long time and log the data to a file. GUI should update for every one second with latest data for this I am using the second VI in which I am accessing the global varibale in which the latest data has been stored in host VI.

Duplicate Post (go here)

How do i save a project with an iLife preview once the project is already saved?

I can't seem to find a way to save a Garageband project with an iLife preview so i can open it in Logic X, iMovie etc
If you can help that'd be awesome thanks :-)

Are you using GarageBand 10?
There are no longer iLife Previews. You share a version of your song to the Media Browser instead. Use the "Share" menu, Share > Song to Media Browser.

Replace with after effects composition is replacing one clip with old project

PP CC 2014
AE CC 2014
Windows 7
Hello,
when I "replace with after effects composition" in PP - After Effects is replacing one *mov clip (only one of hundreds) with an old aep comp, that I was working on yesterday. And say that this aep is missing...
I allready purge all data, deleted all cache (PP&AE) restart Computer...
What can I do...Its really stopping me from reaching my deadline tonight....
Thanks!

Ok guys...I got it...
Its not a *mov that it missplaced, its another dynamic link to AE...so dynamic link to dynamic link seems not to work? I accidently linked that clip and worked on it in AE in the old aep from yesterday..but still wondern why AE get confused loading it...the "old aep comp" is full with others comp...could that be the reason...?

I imported a video I make in another program and I played it back in the video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12

I imported a video I make in movie maker program and I played it back in the premiere video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12
all I did was played it back how do I save that and make a new version of the video beacause when I save a copy the effect look I was trying to save was not there.
Rodney
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
[If you are posting using email, please turn your 'sig file' function OFF for posting]

silkman1
I would be glad for the opportunity to customize a Premiere Elements 12 answer to your Premiere Elements 12 issue.
But, I want to make sure that we are together on the details. This is my understanding of what you have written. Please review and let me
know if I am misinterpreting anything that you have written.
You have a video created in Windows Movie Maker.
How did you output the video from Windows Movie Maker...wmv or mp4, what was the frame size and frame rate of that export?
Next you import that video into Premiere Elements 12 (can we assume that this is on Windows 7, 8, or 8.1 64 bit?)
From what you wrote, you have applied a pan and zoom effect to your video in Premiere Elements.
Now you go to export the Premiere Elements 12 Timeline content with your video with the pan and zoom applied.
But, the pan and zoom effect is not seen in playback of the export.
Is all of the above correct so far?
If so....we are going to need some more details from you...
a. What is the project preset that you or the project are setting to match the properties of the video coming from Movie maker? See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Rate, and Pixel Aspect Ratio even if the fields look grayed out.
b. Are you applying the pan and zoom effect with the Pan and Zoom Tool, fx Effects Presets, or keyframing the Scale (for Zoom) and
Position (for Pan) in the Motion Panel expanded?
c. What are you selecting as your export in Publish+Share/. Please give details...are you using default settings or customizing the export
setting under the Advanced Button/Video Tab and Audio Tab of the preset selected?
I am suspecting some sort of mismatch of your project settings or some problems with working with the Pan and Zoom tool. I need
your answers to help me help you. If I have written anything that you do not understand, please let me know. I will re-write if necessary
so that we are in sync to resolve the issue.
Thanks.
ATR

Saving Error in Project Server 2013, Need Help!

Hey All,
I am running into issues with a Projects saving from Project Pro 2013 to our Project Server 2013 Farm.
It is strange, when someone tries to save a project out of Project Pro 2013 to Project Server, it will run through the "Synchronizing Data to the Server", and then bombs out with error
Job Type: Save
Error ID:9000(0x2328)
The project could not be saved to the server, Etc..
My understanding is that this is a generic save error that could mean many things.
In the ULS logs under "Active Cache Save" , I am getting:
"Cancelling correlation 1339927b-e9e5-e311-941d-00155d2bc10d as save is an overwrite or resubmit"
What is strange at this point is if I check the project back in, and re-open/re-checkout the project, and try to save again, it is successful in saving.
Just a few details about the environment:
Project Server Version: 2013 RTM (In the process of upgrading)
SharePoint Version: 2013 RTM (In the process of upgrading)
Project Structure: One Master Project with all other projects being subprojects of the master
Published Status: All Published
SQL Version: SQL Server 2012 SP1
User Count: About 5 currently
Deployment: 1 WFE, 1 APP Server, 1 SQL Server
It is just odd, as it seems to be completely random. We have tried clearing caches out to see if that resolves it but it did not. It is just odd that it takes two saves for it to actually work correctly, and is problematic as the many times they are saving
from the master and it bombs out there.
I am not sure how it could be an issue as it is usually just a single user working on the individual subprojects.
Maybe it is an issue in the RTM? I couldn't find any info in any of the CU's or SP's that addresses this directly
Has anyone seen this, or have any suggestions?
MS Support has not been any help at all.
Thanks all

I have heard of issues with Master and Sub-Projects and both being published to Project Server, as a rule it is a feature I learnt to avoid as a result of bad experiences with earlier versions of Project Server.
Whilst this will not resolve the issue you have encountered the following suggestion may help you avoid pain in the future and leverages the potential of Project Server to represent common attributes for projects.
Typically a Master/Sub Project environment is intended to reflect projects that are commonly aligned - it is not unusual for a Master Project to represent a programme and for there to be multiple sub-projects forming the programme - there can be programme
level events that have multiple predecessors from multiple sub-projects.
Rather than create a master and sub-project situation I would suggest looking to define two Enterprise Custom Project fields to assist with such situations. The first being a Project Field called Programme that has a look up table with a list of current
programmes you can select from. The second Project Field would be a Programme Status Field with an associated lookup table with 3 values, Master, Sub-Project, Standalone.
You can have a project represent the Master (Programme) project and open it and all sub-projects in the programme (albeit this would have to be a one by one action to begin with). With all the projects open go and open a New Window in Project Professional
and elect to include all the open projects in the new window - this will create a new project with all the selected projects showing as
"embedded objects" and then create dependencies from sub-projects to programme level events in the Master Project (I would suggest what I call
"one way traffic" when creating "cross project dependencies" to avoid further headaches). Close the project, you will be prompted to save changes which you should do but do not save the new window
"container" project. The dependencies across the projects will persist - in each project you will be able to see external successors - tasks in the master project. In the master project you will be able to see external predecessors.
In PWA you can create Project Centre Programme views that filter to exclude projects that ARE Standalone and group them by Programme and sort by Programme Status Field - this will ensure that the "Master" sits at the top of the pile for each programme grouping.
Just a suggestion - I hope the issue you have encountered is resolved soon.
Dominic Moss | MAPM Microsoft Certified Technology Specialist | Our Newsletter:
PM News Project Server Specialists
Project Server PRIME | Twitter:
@Twitter | Facebook:
@Facebook | Linkedin:
Wellingtone

Saving 6.5 project(with liquify effect) into CS5 = crash?

Similar Messages

Maybe you are looking for