Saving a 72 dpi psd file as a jpg the file gets converted to a 240 dpi file

I do alot of comps for my business in photoshop. I've usually start out 8" x 10" 72 dpi and save it as psd. When I do a "Save As" to jpg and reopen that file the file has converted to 240 dpi and 2" by 3". I want the jpg the same size 8" x 10" 72 dpi. How is this happening?

"I've usually start out 8" x 10" 72 dpi and save it as psd. When I do a "Save As" to jpg and reopen that file the file has converted to 240 dpi and 2" by 3"." is what you wrote.
Then something you did or used during you post processing cropped your 4:5 aspect ratio image's 576 px by 720 px to a 2:3 Aspect Ratio image reducing the pixels to 480PX by 720 Px and change its DPI resolution to 240DPI, Something you did cropped your original 4:5 aspect ratio image to a 2:3 aspect ratio image its height is still the original 720Px High but the width has been reduced by 96 px its now 480Px wide.
Photoshop does not crop and change a documents dpi resolution on it own but it does have features that can be used to do that.
DPI is just a setting its the pixels involved that matter.

Similar Messages

I have uploaded a pdf-file. Where is the command to convert it to docx?

I have uploaded a pdf-file. to https://files.acrobat.com/?trackingid=KGLHY#folder/0662976a-3059-4bd3-8f49-87041736f7c2.
It appears in the list of files.
Where is the command to convert it to docx?

Hi TRee2,
When you logon to the Acrobat.com service on the top left corner click on 'Tools' an now on the top right side select 'Export from pdf'.
Now select the files and click on 'Export'.

I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4

I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4 files. Now, they are not compatible. How to I get them into imovie?

Hi
I use
• DV-PAL or DV-NTSC - or -
• AIC
Yours Bengt W

HT2914 Hello: I am very much a novice with Final Cut. I am trying to import some video files from my desktop but keep getting an error message that says, "File error 1 file recognized, 0 access denied, 1 unknown". The file type is .mov, 35MB, 1920 x 1080,

Hello:
I am very much a novice with Final Cut. I am trying to import some video files from my desktop but keep getting an error message that says, "File error 1 file recognized, 0 access denied, 1 unknown". The file type is .mov, 35MB, 1920 x 1080, Codec MPEG-2 video linear PCM timecode, color profile HD (1+1+1). Can someone help? Thanks, Paul

You can't import MPEG-2 files directly to FCP X.
Can you play this file in Quicktime Player? If so, then you can use the free program MPEG Streamclip to convert this to Quicktime. Use the ProRes codec.

I'm having trouble converting my RAW files to jpegs. Even though my RAW files are 90MB plus, the jpegs when converted are only around 6MB. Am I doing something wrong? Thanks, A

Dear Forum,
I realise this isn’t necessarily your problem, buy I’m having trouble converting my RAW files to jpegs.
Even though my RAW files are 90MB plus, the jpegs when converted are only around 6MB.
Am I doing something wrong?
Thanks,
A

HHi Barbara, thanks for replying to my post.
No there's nothing wrong with the Jpegs, but I want to srart uploading images for sale in Alamy, but they say they must be a minimum of 17mb un compressed. Does that mean that at 6mb compressed from 90mb they'd be acceptable?
thanks,
alex

File Content Conversion -All the input content was not shown in output file

Hi Experts,
In my scenario, I need to send data from .XML file to .txt file, using File Content Conversion at Receiver communication channel. This is File to File scenario.
This is my Input xml file.
<ns:FILEINPUT_MT xmlns:ns="http://File2FileTest">
<RECORD>
 <Row>
 <FirstName>Susie</FirstName>
 <LastName>Tony</LastName>
 <City>London</City>
 <Country>UK</Country>
 </Row>
</RECORD>
</ns:FILEINPUT_MT>
Processing Parameters
Target Directory = C:/Test
File Name Scheme = xi_output.txt
File Construction Mode = Add Time Stamp
File Type = Binary
Content Conversion Parameters
Recordset Structure : RECORD
RECORD.endSeparator = nl
RECORD.fieldSeparator = ;
After Activate and providing the input xml file, xi_output.txt file was generated. But the file content was shown only with Susie i.e. with First Name only. I need xi_output.txt file should have all the four fields (FirstName, LastName, City, Country)
Could some one help me to resolve the issue?
Thanks in advance
Sree

Check these blogs...Might help you.
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
Link for SAP Help
http://help.sap.com/saphelp_nw2004s/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm

When exporting .psd files to jpg, the picture gets cropped

This happens on occasion. I cannot find any answers on how to fix this issue anywhere. Can someone help?

It doesn't always happen. If it does, closing the .psd and re-opening it will normally fix it temporarily.

Is it possible to select multiple files on the W8.1U1's SEARCH RESULTS window page? For instance, if 10 CPP files are found by the seraching mechanism, can I select all 10 files and have them open in Visual Studio at once?

TIA.

Brandon, this forum member is known since a long time ago an arrogant (he thinks he knows more than every other) and stupid(*) (full of misconceptions). His first post is a very good example of what I just wrote. How does he dare to suggest to use File
Explorer, if W8.1 already has a system built for doing just this search? Do I have to open File Explorer in the folder (or somewhere near) the item I'm looking for? What about the other items in folders above it? This suggestion is stupid(*). He even
asserts that I'm using Modern UI! I'm not! I'm using the desktop, but his misconceptions make him write such idiocies(*) with such arrogance: asserting what he doesn't know (arrogancy and stupidity). And more, this guy is no one to say he/he/he to me, because
I know he is what you deleted from my posts, and more, he is often crying, moaning and snivelling like a spoiled child in this forum and messing up any thread posting stupid(*) images of programs imagined/designed/developed by others. All posts from him in
this thread must be trashed (you should do it). He has nothing to contribute POSITIVELY in this thread, but just to MESS IT UP.
(*) stupid, I can write, after all, you didn't delete this word from this ... poster.
Now, look at the first reply: this forum member has no idea how much stupid is his 'work around'. And this 'work around' does not answer my question and even does address the environment I mentioned: W8.1 U1 search results window page, and not File Explorer!
His second post just reassures me he has no idea what is the searching mechanism I'm talking about. He even mentions Win-w(!) which proves he totally ignore what is the searching mechanism I'm talking about. A user like this one, must have many monitors to
keep him busy looking at them, and having excuses for not read and learn technical documentation. It's ignorance about technical aspects of computer issues that makes him post bad bug report and a bad idea in Connect site:
Using Get-Date -Format "CyM" to work around some bugs
https://connect.microsoft.com/PowerShell/feedback/details/884502/using-get-date-format-cym-to-work-around-some-bugs
Only total ignorance about PowerShell makes someone post such bad 'bug' report. He got critics about his bad post, but I'm sure he doesn't understand.
Column headers for alias should include DisplayName instead of just Name
https://connect.microsoft.com/PowerShell/feedback/details/908152/column-headers-for-alias-should-include-displayname-instead-of-just-name
In fact, the information displayed is already DisplayName, but this guy has no technical knowledge to understand what is happening.
These 2 forum members just messed up a thread that should be free of negative contributions, besides off topic.

What folder are the cache files stored? In the previous version I could look at cached files but now no files are stored at that location.

I want to be able to retreave cached files while running firefox as I could in the last version

You can find out where the file is through '''about:cache'''
but that would be a major hassle finding your files, you want to install
:CacheViewer '''0.7b''' -- https://addons.mozilla.org/firefox/addon/cacheviewer/
It is not marked as compatible but get the latest development version 0.7b, read the Developer Notes for the extension. It works. You may have to override compatibility.
* http://kb.mozillazine.org/Extensions.checkCompatibility '''extensions.checkCompatibility.5.0''' user set Boolean '''false'''

How do I lower the file size or reduce the document when converting to a PDF.

I have to upload a doc onlind and can only upload it if it is in PDF format. I converted it fine, but they restrict the file saize to 5 Meg or lower. The file is one page and it says it is 6.3 Meg, so it wont except the file transfer.

Hi speck300,
If you'd like to reduce the file size of a PDF, you need to use Acrobat. If you don't have Acrobat, you are certainly welcome to try it for http://www.adobe.com/products/acrobat.html. In Acrobat Pro, there are several options for reducing file size, including the File > Save as Other > Reduced Size PDF and File > Save as Other > Optimized PDF.
Best,
Sara

Is it possible to set up a form with a submit button where the data in the fields gets added to an existing excel file, just like 'collect response' but without connecting to the internet?

I have a form that I want to use to collect peoples information with a submit button. I am trying to get the data that gets inserted to be added to an existing excel doc when the submit button gets hit, the form then resets and someone else can fill in the same form, hit submit and his data gets added to the existing data in the same excel doc. It is basically the same as the 'collecting response' option but without having to be online. The form is going to be used at a boat-show and I am going to get people to fill it out on an iPad. Does anybody know if this is possible?

You could connect a bunch of 3700s to each computer and do this .
Or...since you're the one who monitors the monthly limit, you could restrict an individual's internet access once you see that you guys are coming too close to the cap.
I don't work for Cisco. I'm just here to help.

How does the icon get created for a saved file

In my program I allow saving files using JFileChooser and ActionListener.
In the constructor of the main class which extends JFrame I also set an icon by saying:
this.setIconImage(new ImageIcon("image.jpg").getImage());
This does not only set an icon on the title bar and the minimized window, it also creates an icon on my saved files. However, the image quality for the icon on my saved files is bad, even though the image quality for the other icons is ok. The size of the icon image I am providing is close to the size of the icon image on my saved files.
How did the icon get created for my saved files? Is it possible to improve the image quality?
Thanks for looking at this!

I just realized that
this.setIconImage(new ImageIcon("image.jpg").getImage())
did not create the icon for my saved files.
So what did create it? I did not program it!
However, I happen to have an icon file Ananya.ico where I have my java project. I use if for my installation file. Did Java use this icon?
Please help! Thanks!

Convert word document to PDF file in SAP

Hello experts,
I've been searching around to get some code examples to upload a word document and convert it into a PDF file and then store it in unix. I hope one of you can help me, because many explanations and threads exist, but I did not get wiser reading them...
I don't want to use 3rd party tools to do the conversion, but do it directly in SAP with abap coding and if necessary spool processing.
System details:
SAP ECC 6.0 (unicode system)
SAP_ABA 700 0014 SAPKA70014 Cross-Application Component
SAP_BASIS 700 0014 SAPKB70014 SAP Basis Component
Thanks in advance!
Regards,
Danny

Hi,
You can get the spool no from transaction SP01 and later use this spool no to convert the word document to PDF
using the function module CONVERT_OTFSPOOLJOB_2_PDF and give the import parameter as ur spool id.
once the doc gets converted to PDF u can use CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG
to get the path where the file is to be saved and later give the path to function module GUI_DOWNLOAD to download the file.
or else u can manually execute the following reports:
RSTXPDFT4 (give the spool no. as input)
RSPO0068 (give the word doc with its full path as input)
Hope that helps u
Regards,
Radhika

How to replace or remove last 500 bytes of a file without rewriting all the file?

Hi everyone,
Usually I only ask for help when I can't find a solution for several days or weeks... And guess what? That just happen!
So, this is what i am trying to do:
I have a program to ZIP folder and protect them with password, then it encrypts the zip file.
That it's working fine, until the user forgets his password.
So, what I want to do is give the user a Recovery Password option for each ZIP file created. I can't use the Windows Registry because the idea is to be able to recover the password in any computer.So i came up with an idea...
In simple terms, this will work like this:
0 - Choose folder to ZIP
1 - Ask user for recover details (date of birth, email etc)
2 - ZIP folder with password
3 - Encrypt ZIP file
4 - Encrypt recover details and convert it to HEX
5 - Add recover details (in HEX) to the end of the ZIP file (last bytes)
6 - Add "5265636F76657244657461696C73" which is the text "RecoverDetails" in HEX
7 - Add "504B0506000000000000000000000000000000000000" this is the final bytes of a ZIP file and will make the Operating System think that is a ZIP file (i know that will give an error when we try to open it.. the ideia is to change the
extension later and use my software to do all the work to access this ZIP/folder again)
So, explaining what it's here, I want to say that I managed how to do all of this so far. The point number 6 will help us to determine where the recover details are in the file, or if they actually exist because user can choose not to use them.
In order to unlock this ZIP and extract it's contents, I need to reverse what I've done. That means, that need to read only the last 500 bytes (or less if the file is smaller) of the ZIP and remove those extra bytes I added so the program can check
if the user is inputing a correct password, and if so decrypt contents and extract them.
But, if the user insert a wrong password I need to re-add those bytes with the recover details again to the ZIP file.
The second thing is, if the user forgets his password and asks to recover it, a form will be shown asking to insert the recover detail (date of birth, email etc), so we need to reed the last 500 bytes of the ZIP, find the bytes in number 6 and remove the
bytes before number 6, remove bytes in number 6 and number 7, and we will have the recover details to match against the user details input.
I have all done so far with the locking process. But i need help with the unlocking.
I am not sure if it's possible, but this what i am looking for:
Read last 500 bytes of a file, remove the bytes with recover details and save the file. Without reading the whole file, because if we have a 1GB file that will take a very long time. Also, i don't want to "waste" hard drive space creating a new
clone file with 1GB and then delete the original.
And then add them back "in case user fails the password" which should be exactly the same.
This sounds a bit confusing I know, even to me, I am writing and trying to explain this the better I can.. Also my English is not the best..
Here it goes some code to better understanding:
'READ LAST 500 BYTES OF ZIP FILE TO CHECK IF IT CONTAINS RECOVER DETAILS
Dim oFileStream As New FileStream(TextBox_ZIP_to_Protect.Text & ".zip", FileMode.Open, FileAccess.Read)
Dim oBinaryReader As New BinaryReader(oFileStream)
Dim lBytes As Long = oFileStream.Length
oBinaryReader.BaseStream.Position = lBytes - 500
Dim fileData As Byte() = oBinaryReader.ReadBytes(500)
oBinaryReader.Close()
oFileStream.Close()
Dim txtTemp As New System.Text.StringBuilder()
For Each myByte As Byte In fileData
txtTemp.Append(myByte.ToString("X2"))
Next
Dim RecoveryDetailsPass_Holder = txtTemp.ToString()
'Dim Temp_2 = txtTemp.ToString()
'RichTextBox1.Text = txtTemp.ToString()
If txtTemp.ToString.Contains("505245434F47414653") Then
'we have password recovery details(the numbers mean RecoverDetails in HEX)
'next we will get rid of everything before and after of string "cut_at"
Dim mystr As String = RecoveryDetailsPass_Holder 'RichTextBox1.Text
Dim cut_at As String = "505245434F47414653"
Dim x As Integer = InStr(mystr, cut_at)
' Dim string_before As String = mystr.Substring(0, x - 1)
Dim string_after As String = mystr.Substring(x + cut_at.Length - 1)
RecoveryDetailsPass_Holder = RecoveryDetailsPass_Holder.Replace(string_after.ToString, "")
RecoveryDetailsPass_Holder = RecoveryDetailsPass_Holder.Replace("505245434F47414653", "") ' this is RecoverDetails in HEX
RecoveryDetailsPass_Holder = RecoveryDetailsPass_Holder.Replace("504B0506000000000000000000000000000000000000", "") ' this is the bytes of an empty zip file
'AT THIS POINT WE HAVE ONLY THE RECOVER PASSWORD DETAILS (date of birth, email etc) IN THE VARIABLE "RecoveryDetailsPass_Holder"
'////////////////////////////////////////////////////// TO DEBUG
'MsgBox(string_after.ToString & "505245434F47414653")
'InputBox("", "", string_after.ToString)
'\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ TO DEBUG
'Temp_2 = Temp_2.Replace(RecoveryDetailsPass_Holder.ToString, "")
Now that we have the recover details, we need to remove them from ZIP in order to the software try to unzip it with the password provided by the user on the GUI.
If the user needs to recover the password we have the details already in RecoveryDetailsPass_Holder variable and just need to match them against user input details.
If the user fails, we need to put the RecoveryDetailsPass_Holder back on the file.
Any question just ask, it's a bit trick to explain i think, but please ask.
Anyone know how to do this?
Many thanks in advanced.
Nothing is impossible!
@ Portugal
Vote if it's helpfull :)

@ ALL
Thank you very much for you help. I know that if I'm "playing" with bytes you should assume that I know a lot of VB.net, but I don't know that much unfortunately. I am not a beginner but I am still very fresh and I probably do stuff that work but
probably not in the best way...
Anyway, I will explain the idea of this little software I'm making. Once I wanted to create a program to protect folders with password, and I came up with something to change folder permissions to lock access to them, and that actually worked fine and quickly.
However, I managed how to "crack" the protection by going to folder properties, security tab and then give permissions back to my username. So that, to me, wasn't a safer system to protect folders, also I want the ability to use passwords. So I search
and search online for a way to do it, and someone replied (to someone with the same question as me) that the best option would be to create a zip with all contents of the folder, with password and then change the extension from .zip to .whatever and register
the new extension .whatever on the Windows Registry, so that file will have an icon and open with my software.
So I did...The program zips everything, change the extension and I added the encryption to avoid people changing the extension to ZIP or trying to open with 7-Zip or similar and be able to see the protected files names in the .zip/.whatever
Answering to all of you now:
@Armi
"System.IO.FileStream.SetLength"
I know I tried that but I erased the code because it didn't work for some reason, I don't remember why sorry, was long time before I created this post.
The last code I was trying to use was this:
' Set the stream position to the desired location of the stream.
Dim fileStream As IO.FileStream = _
New IO.FileStream(TextBox_ZIP_to_Protect.Text & ".zip", IO.FileMode.Append)
Try
' Set the stream (OFFSET) position to the desired location of the stream.
fileStream.Seek(210, IO.SeekOrigin.Current)
Dim Bytes_do_ZE As Byte() = HexStringToByteArray(Temp_2.ToString)
'Write Characters ASCII
For Each Byte_Do_Zeca As Byte In Bytes_do_ZE
fileStream.WriteByte(Byte_Do_Zeca)
Next
Finally
fileStream.Close()
End Try
and we need this:
Private Shared Function HexStringToByteArray(ByRef strInput As String) As Byte()
Dim length As Integer
Dim bOutput As Byte()
Dim c(1) As Integer
length = strInput.Length / 2
ReDim bOutput(length - 1)
For i As Integer = 0 To (length - 1)
For j As Integer = 0 To 1
c(j) = Asc(strInput.Chars(i * 2 + j))
If ((c(j) >= Asc("0")) And (c(j) <= Asc("9"))) Then
c(j) = c(j) - Asc("0")
ElseIf ((c(j) >= Asc("A")) And (c(j) <= Asc("F"))) Then
c(j) = c(j) - Asc("A") + &HA
ElseIf ((c(j) >= Asc("a")) And (c(j) <= Asc("f"))) Then
c(j) = c(j) - Asc("a") + &HA
End If
Next j
bOutput(i) = (c(0) * &H10 + c(1))
Next i
Return (bOutput)
End Function
That code, as I understand, is to search for the OFFSET of the bytes in the file and start to write from there... That OFFSET should be the beginning of the 500 bytes read on the code before. I got the OFFSET position "210" reading the file with
the HEX editor "HxD - Hexeditor v1.7.7.0" but using the OFFSET won't work because every file, password, recover details and so on, are different and so the file size, changing the OFFSET I
think.
@Reed Kimble
Does that sound like something which might work for you?
Thanks for your help. That might be some solution, however it seams a bit of the same problem where we need to read the bytes again to get the recover details. But, as I said in this post, because this is meant to password protect folders, do you think that
will apply as well?
@Crazypennie
Thanks for your reply.
All this appears really weak. The user has your application since he need it to open the file .... and the code in the application contain the code to read the file without knowing the password. Therefore anyone can read your code and retrieve the
data without the password ... if he knows VB.
The application can only open the file if the user didn't use a password to protect the file. Because the file is encrypted and needs to be unencrypted first.
When the application tries to open/read the file, will need to decrypt it first and then check for a password and do the validation. Also the application is with the code masked/protected which i think it might not be easy for reverse engineering.
- You need to use a web server and a symmetric key encryption
This a good idea, besides I don't know how to implement it. However the idea is to be able to:
1 - Protect a folder anywhere in any Windows computer (portable app)
2 - Recover password details (security question) in any computer, online and offline
And I think we need a computer always connected to the Internet to use that method, right?
@ Mr. Monkeyboy
Thank you very much for your effort.
I just wanted to let you know that the zip method you are using is no longer supported.
I didn't actually knew that. Thanks for letting me know.
Do you require the compressed encrypted files to actually be Zip files or could they just be compressed files that have nothing to do with Zip?
No, it doesn't need to be a .zip extension. I am actually using my own extension. It starts as a Zip but then I changed to my own extension which I have registered on the Windows Registry.
@ ALL
Thanks again to all for trying and spending time helping me.
By the way, I might not be able to answer or try any code during the weekend... It's easter break and family is around. Have a nice easter everyone. :)
Nothing is impossible! Imagination is the limit!

How to create the Export Data and Import Data using flat file interface

Hi,
Request to let me know based on the requirement below on how to export and import data using flat file interface.....
Please provide the steps involved for the same.......
BW/BI - Recovery Process for SNP data.
For each SNP InfoProvider,
create:
1) Export Data:
1.a) Create an export data source, InfoPackage, comm structure, etc. necessary to create an ASCII fixed length flat file on the XI
ctnhsappdata\iface\SCPI063\Out folder for each SNP InfoProvider.
1.b) All fields in each InfoProvider should be exported and included in the flat file.
1.c) A process chain should be created for each InfoProvider with a start event.
1.d) If the file exists on the target drive it should be overwritten.
1.e) The exported data file name should include the InfoProvider technical name.
1.f) Include APO Planning Version, Date of Planning Run, APO Location, Calendar Year/Month, Material and BW Plant as selection criteria.
2) Import Data:
2.a) Create a flat file source system InfoPackage, comm structure, etc. necessary to import ASCII fixed length flat files from the XI
ctnhsappdata\iface\SCPI063\Out folder for each SNP InfoProvider.
2.b) All fields for each InfoProvider should be mapped and imported from the flat file.
2.c) A process chain should be created for each InfoProvider with a start event.
2.d) The file should be archived in the
ctnhsappdata\iface\SCPI063\Archive directory. Each file name should have the date appended in YYYYMMDD format. Each file should be deleted from the \Out directory after it is archived.
Thanks in advance.
Tyson

Here's some info on working with plists:
http://developer.apple.com/documentation/Cocoa/Conceptual/PropertyLists/Introduc tion/chapter1_section1.html
They can be edited with any text editor. Xcode provides a graphical editor for them - make sure to use the .plist extension so Xcode will recognize it.

Saving a 72 dpi psd file as a jpg the file gets converted to a 240 dpi file

Similar Messages

Maybe you are looking for