Saving a channel setup...

I have found a channel setup that I am using to record guitar. It's actually two channels. I split the signal from the guitar with one cable going to a external effects processor and stereo into LE, and the 2nd going direct through a preamp to LE. I have put some effects on each channel and I have found a sound that I really (really) like. Can I save these two channel setups in such a way that they can be used in other projects?

Click on the little white arrow near the inserts in each channel strip and save your settings.
cheers
rob

Similar Messages

Entry Channel setup for multiple company codes

Hello,
I have a question regarding the entry channel setup (for external requirements in the Plan-Driven Procurement scenario)
In previous implementations, I 've created an entry channel below each company code (as the documentation says it should be). Now, for each entry channel, there was a EBP user assigned, which corresponded to an RFC entry in the backend system (I was connecting EBP to multiple backend systems)
Now, what should I do in the following scenario?:
1. SRM is only connected to one backend system
2. There are 50 company codes
Does that mean I have to create 50 users (for each channel) plus 50 RFC connections in the R/3 system (each with a different user in the backend system), pointing to the same SRM system?
I was thinking of creating an Org iD in the SRM structure at the top (which would be the entry channel), assign only ONE user to it and then fill attribute BUK with all the company codes. However, I don't know if this will work, because the external requirement process might need the company code defined in the "Function" tab... =/
Any help would be greatly appreciated.
Regards,
Gilberto.

Hi Proyecto Genesis,
I am also configuring the Entry channel (org unit) for multiple company codes.
I tried your logic of defining the entry channel outside company code level. Assigned the BUK attribute and extended attribute for plants and storage locations.
Also in my case the local Pur org and Pur group is defined outside the company code. Is it correct?
However the system fails to transfer the external requisition to SRM.
SLG1 displays following error message.
"No address found for partner function type Ship-To Address"
So if I move the Entry channel (org unit) under any one company code level then the external requisitions are transferred correctly to SRM.
But then the issue is the requirements are not transferred with the backend Pur Org and Pur grp. Instead they are transferred to the Pur Org and Pur grp of the company code under which the entry channel is defined.
Can you please share how do we need to define the entry channel, local pur org and pur grp for multiple company codes scenario, so that the ECC requisitions are transferred with the correct company code, pur org and pur grp to SRM?
Or do we need to define Entry channel for each company code and RFC user actually mapping the same backend system?
Please guide.
Regards,
Sandeep

Saving a Channel with all of its effects and settings?

Is there any ways to save the virtual instrument, all of its applied effects and their settings?

Hi,
I'm still waiting for my copy of Express 8 but in Express 7 you could do this by saving the channel strip setting. On page 230 of the Express 8 manual, which I've been reading in advance of actually receiving the product, it tells you how save a channel strip setting. Hope this helps.

AS2(SOA-B2B) Channel Setup for Inbound/Outbound

Hi
Can anyone share a document on how to setup AS2(SOA-B2B) Channel Setup for Inbound/Outbound? We are trying to configure AS2 (SSL), but test with partner is failing.. any document would help...
Appreciate your help
--Sri

One options is to use a java callout in the inbound agreement.
Ismail M.

Need docs that explain Fibre Channel setup, getting I/O error on 2540 SAN

Sun T5220 Host running Solaris 10 5/09 as management host.
Qlogic 5602 FC Switch
Sun Storagetek 2540 - one controller tray with 9 300G SAS Hitachi drives. Firmware 7.35.x.
Sun branded Qlogic QLE2462 HBAs - PCI express, dual port. 3 in the T5220. qlcxxxx drivers for the HBAs.
Sun Common Array Manager software version 6.5.
I am a long-time Oracle DBA who has the task of setting up a Fibre Channel SAN. I am not a Solaris sysadmin, but have installed and maintained large databases on Solaris boxes where I had access to a competent sysadmin. I am at a classified site and cannot bring out electronic files with logs, configuration info, etc. to upload. Connecting the T5220 is the 1st box of many. This is my first exposure to HBA's, Fibre Channel, and SAN, so everything I know about it I have read in a manual or from a post somewhere. I understand the big picture and I have the SAN configured with 2 storage pools each with 1 volume in them on RAID5 virtual disks. I can see the LUN 0 on the T5220 server when I do a luxadm probe and when I do a format. I formatted one of the volumes successfully. Now I attempt to issue:
newfs /dev/rdsk/device_name_from_output_of_luxadm_probe
I get an immediate I/O error. I could be doing something totally naive or have a larger problem - this is where I get lost and the documentation becomes less detailed.
What would be great is if anyone knows of a detailed writeup that would match what I'm doing or a good off-the-shelf textbook that covers all of this or anything close. I continue to search for something to bridge my lack of knowledge in this area. I am unclear about the initiators and targets beyond the fundamental definitions. I have used the CAM 6.5 software to define the initiators that it discovered. I have mapped the Sun host into a host group also. I do not know what role the Qlogic 5602 Fibre Channel switch plays with respect to initiators and targets or if it has any role at all. Is it just a "pass through" and the ports on the 5602 do not have to be included? Maybe I don't have the SAN volume available in read/write. I find bits and pieces in blogs and forums, but nothing that puts it all together. I also find that many of the notes on the web are not accurate.
This all may appear simplistic to someone who works with it a lot and if you know of an obvious reference I should be using, a link or reply would be greatly appreciated as I continue to Google for information.

Thanks for the reply. I had previously read the CAM 6.5 manual and have all the SAN configuration and mappings. Yesterday I was back at the site and was able to place a UFS filesystem on the exposed SAN LUN which was 0. I've not seen any reference to LUN 0 being a placeholder for the 2540 setup and when I assigned it, I allowed the CAM 6.5 software to choose "Next Available" LUN and it chose 0. LUN 31 on the 2540 is the "Access" LUN that is assigned automatically - perhaps it is taking the place of what you describe as the LUN 0 placeholder.
I was able to put a new UFS filesystem on LUN 0 (newfs), mount it, and copy data to it. The disk naming convention that Solaris shows for the SAN disks is pretty wild and I usually have to reference a Solaris book on the standard scsi disk name formats. My question/confusion at the moment is that I have 3 Sun branded Qlogic HBA's in the Sun T5220 server - QLE2462 (dual port) with one port on two of the HBAs cabled to the Qlogic 5602 FC switch which is cabled to the A and B controller of the SAN 2540 - there are only 2 cables coming out of the 5220; the 3rd HBA (for future use) has no cables to it. Both ports show up as active and connected on the server down to the SAN and the CAM 6.5 software automatically identified both initiators (ports) on the Sun 5220 when I mapped them. I had previously mapped them to the Sun host, mapped the host to a host_group, virtual disks to volumes, volumes to....etc.; and was able to put data on the exposed volume named dev_vol1 which is a RAID5 virtual disk on the SAN.
When I use the format command on Solaris, it shows two disks and I assumed this represented the two ports from the same host 5220. I was able to put a label on one of these disks (dev_vol1), format it, and put data on it as noted above. When I select the other disk in the format menu, it is not formatted, won't allow me to put a label on it (I/O error) and I can go no further from there. The CAM 6.5 docs stop after they get you through the mapping and getting a LUN exposed. I continue on the in a Solaris-centric mindset and try to do the normal label, format, newfs, mount routine and it works for the one "disk" that format finds but not for the other. The information from the format info on both the disks shows them as 1.09 TB and that is the only volume mapped right now from the SAN so I know it is the same SAN volume. It does not make sense that I would label it and format it again anyway, but is this what I am supposed to see - two disks (because of 2 ports?) and the ability to access it through one. I found out by trial an error that I could label, format, and access the one. I did not do it from knowledge or looking at the information presented....I just guessed through it.
I have not "bound" the 2 or HBAs in any way and that is on my list as next because I want to do multipathing and failover - just starting to read that so I may be using the wrong language. But I am wondering before I go on to that, if I am leaving something undone in the configuration that is going to hamper my success in the multipathing - since I cannot do anything with the 2nd "disk" that has been exposed to Solaris from the SAN. I thought, after I labeled, formatted and put a filesystem on the one "disk" I can write to that the other "disk" that shows up would just be another path to the same data via a 2nd initiator. Just writing that does not sound right, but I am trying to convey my thoughts as to what I logically expected to see. Maybe the question should be why am I seeing that 2nd "disk" in a Solaris format listing at all? I have not rebooted any time during this process also and can easily do that and will today.

Error while saving communication channel

Hi,
build up the sample Adapter out of the book "Mastering XI Programming". After deploying it on server, I try to create a communication channel with this adapter.
All other PCK objects are saveable, but when I try to save or delete the channel with this Jabber adapter, following error appears:
com.sap.engine.services.ejb.exceptions.BaseRemoteException:
Exception in method modifyOrStoreCPAObject.
     at com.sap.aii.af.service.cpa.impl.ejb.PCKAccessRemoteObjectImpl0.modifyOrStoreCPAObject(PCKAccessRemoteObjectImpl0.java:1034)
     at com.sap.aii.af.service.cpa.impl.ejb.PCKAccessRemoteObjectImpl0p4_Skel.dispatch(PCKAccessRemoteObjectImpl0p4_Skel.java:160)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native
Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.NoClassDefFoundError: com/sap/aii/af/service/cpa/Direction
     at de.cdiag.xi.pck.jabber.XIConfiguration.channelRemoved(XIConfiguration.java)
     at de.cdiag.xi.pck.jabber.XIConfiguration.channelUpdated(XIConfiguration.java)
     at com.sap.aii.af.service.cpa.impl.callback.CallbackManager.performChannelCallback(CallbackManager.java:225)
     at com.sap.aii.af.service.cpa.impl.pck.LocalAccessManager.modifyCPAObject(LocalAccessManager.java:309)
     at com.sap.aii.af.service.cpa.impl.pck.LocalAccessManager.modifyOrStoreCPAObject(LocalAccessManager.java:343)
     at com.sap.aii.af.service.cpa.impl.ejb.PCKAccessBean.modifyOrStoreCPAObject(PCKAccessBean.java:132)
     at com.sap.aii.af.service.cpa.impl.ejb.PCKAccessRemoteObjectImpl0.modifyOrStoreCPAObject(PCKAccessRemoteObjectImpl0.java:1016)
     ... 10 more
; nested exception is:
     java.lang.NoClassDefFoundError:
com/sap/aii/af/service/cpa/Direction
got no idea what happend
Using NW2004s SneakPreview (7.0)
jsd 1.4.2_15
Any ideas?
thx
chris

Can you please describe more in detail what you mean? In PCK I couldn't find a adaptermetadata option. Do you mean in context of an object or in menu? And what's up with this adaptermetadata?
thanks
chris

Admin network channel setup

I have some multihome machines running managed servers and want to partition the
admin traffic on each machine to a specific interface. I have set up an admin
network channel but how to I tell the Admin server to now use this interface instead
of the domain wide administration port?

Is this request for Windows Phone?
Count me in for a WP version of the very useful Connectivity Analyzer app for Symbian by Nokia.

Sweep IEPE channel setup

I am struggling to configure the channel configuration (specifically the IEPE settings) of the SVT sweep VIs.
The options are AC,DC and ground, which integers represent them? Is there an example or a properly set up constant available anywhere? Thanks!
Attached is a picture of part of the VI.
Attachments:
DSA sweep.png ‏5 KB

Hi Timo
The integers for AC is 10045, DC is 10050 and grnd is 10066. I am attaching a picture where u can find these integers for the options.
As far as example for configuring SVT sweep VI you can get a VI called SVXMPL_getting started with swept sine.vi (DAQmx) in Find examples
Search for Sweep and u will get this VI. It explains a lot and is in detail about how you can configure your acquistion. Play with that Vi and you will get what you want from it for your data acquistion.
Regards,
Nitin
Attachments:
integers.PNG ‏22 KB

AppleWorks 6.2.9 w/ OSX 10.5.4 saved doc Page Setup corrupted

AppleWorks 6.2-6.2.9 has a Page Setup problem on OSX 10.5.4. Bought new MacBook for wife, transferred all files. When old Appleworks 6.2 .cwk WP files are opened the Page Setup is corrupt. Scale says 1,440%, doc prints as blank page. Can copy all, paste to new WP doc and works OK. Other apps so far print OK (FileMaker Adv 8.5, TextEdit, etc.)

The earliest stable version of AppleWorks in OS X is 6.2.4. The latest version is 6.2.9. Both work well in any version of OS X. Here is the page with the links I have for the 6.2.9 updater. The page has a link to the North American updater in the upper right (the blue 15.8 MB) & links to other languages further down. AppleWorks 6.2.9 for Mac.
If you have any ClarisWorks 4 or earlier files that have not been converted to at least AppleWorks 5, the best choice is AppleWorks 6.2.4. E-mail me if you need the 6.2.4 updater & I'll see if I can locate it. Click my name in blue next to this post. My public e-mail address is in the biography section. Just replace (AT) with @.
Whenever you do an update, it's a good idea to do two maintenance tasks, one for the system (Repair Permissions) and one for AppleWorks (delete preferences). (Thanks to Barry for this way to format this very common answer.)
To Repair permissions, launch Disk Utility, found in the Utilities folder in your Applications folder, click on First Aid, then on Repair Permissions.
To delete AppleWorks’ preference files, go to HD > Users > (your account) > Library > Preferences. Find and delete the file com.apple.appleworks.plist. Find and open the folder AppleWorks in this Preferences folder, then delete all of the enclosed files (with the exception of the Button Bar Preferences if you have customized the Button Bars). AppleWorks will recreate the preference files as it needs them. This step should also be done anytime AppleWorks has crashed.

Alpha Channel Lost After Saved

I created an alpha channel for a selection and saved the tiff file. When I reopened the file the next day, I couldn't find the saved alpha channel and the load saving option was greyout. I tried the same process a few times and without any success. Did i miss something?

Do you have Alpha Channels checked in Save As dialog?

Import Audio Channels from another Song? How to??

Hello,
I recorded a couple of songs with a real drumset. I mixed the first song and created a lot of channel->bus->aux->bus routing for the drumset with compressors, eqs, space designers etc. So all my drums running thru the busses, fx, etc, to one final bus. I used 12 audio tracks, 11 busses and 5 auxes to do that. The drumsound is quite nice, and because we recorded all songs with the same drumset and miking, I want to have that routing in all the other songs (arranges) too, where we have already recorded all the different guitars and stuff.
Here is my problem:
How to copy that set of audio-tracks, busses and auxes to the other songs???
Saving all channels as channel strips and reload them in the other songs is a lot of work, because it doesent remember the levels and pannings, and in most of the other songs I have not all the needed auxes and busses in the audio-environment. sometimes, they are already used by other instruments (guitars, etc...)
I tried to simply copy and paste the desired channels (audio objects) but than they have not the right plugins and settings: they keep their "old" settings from that song I want to copy the drums-channels into.
I tried to delete all these objects before (Audio Track 12 to 24, busses 1 to 8 and 17 to 19, auxes 1 to 5) in the destination-song, but they still have the "old" settings after beeing copied.
Logic manual: Aha! Import environment!!
I copied all the desired drums-channels to a new layer, saved that song.
Opened the destination song, options->import environment->layer...
Uups: Still the wrong settings: I dont want DeEssers on my toms!!!
I tried to import environment->merge, but then i got really big chaos. Lots of useless channels, still the wrong settings...
I clicked undo:
Uuuuups!!! All my channels are gone, the whole arrangement is set to "No Output" objects... :-((
Tried again with import envirmonment->update: less chaos, but still the wrong settings. DeEssers on Toms. Grrrr!
About two hours passed now without success just to do that simple thing: How can i copy my audio-channels to the other songs???
any help is greatly appreciated!
thanx!
G5 Dual 2.5 GHz, 3.5 GB Ram Mac OS X (10.4.6) Motu PCI 424, 2408MkII, Traveler
G5 Dual 2.5 GHz, 3.5 GB Ram Mac OS X (10.4.6) Motu PCI 424, 2408MkII, Traveler

Thanx to the northpole for reply!
I think the folders only contains audio/midi regions but no information about the assigned environment objects like busses, auxes, etc...
I dont want to copy the audio regions, just the mixer setup with the specific channels and busses.
regards!

When closing firefox 4.0 with multiple tabs open, i wish to save this setup when i reopen firefox. the option to save my setup is now not in the prompt. only that i'm closing multiple tabs. how do i do this?

in the older version of firefox, you were prompted when you were closing multiple tabs. but you were also given the option of saving the current setup so that when you reopened firefox, this current setup would reopen also. how do i make this happen with firefox 4.0?since i updated to firefox 4.0, there is no obtion given to save my current setup.

You can change Firefox preferences so that you also get the option to save the current tabs when quiting:<BR><BR>
# Type '''about:config''' into the location bar and press enter
# Accept the warning message about being careful and you will see a list of settings.
# Type '''browser.showQuitWarning''' into the ''Filter'' box at the top.
# If its value is ''false'', double-click on it to change it to ''true''.

Can NI-DAQmx Base read more than one channel at a time?

I need to read and record two channels off of my Ni USB-6008 using NI-DAQmx Base. Is there a way to do this or is a lost cause?

Of course it can read multiple channels. In your channel setup, do something like "Dev1/ai0:2". This will read channels 0 through 2.

Logic Channel Strip Instruments no longer open after Logic 8 upgrade

I upgraded Logic 8.0 to 8.0.1 and now none of the preset Logic Channel strip instruments will open. I can open all of the instruments on their own no problem. But if I select something from one of their saved presets or an instrument that I've saved, it does nothing, just hangs. There's no beach ball or logic not responding. When you do force quit, it quits logic and then upon a restart of the system, the system just freezes too. This is really frustrating because I've save a lot of my own instruments and can't get to them now. This happen in a previous session and a new session started from scratch with the upgrade. I can access all of my saved audio channel strips. Has anyone encountered this? One more bit of frustration and impediment to my work flow. Thanks, Jeff.

I've also trouble with that Channel Strips. I've saved and closed a Song with some Mastering-Plugs in the Output 1-2 ( also Stereo Sum ) and after I reloaded that song, there wasn't no Plug anymore. So all my work was gone and I am also very frustrated.
The next big Problem is working with folders. I've in most of my songs folder of MIDI and Singers and when I am working with this songs on Logic 8, I got many failure in the view of waveforms and regions.
Sometimes regions doesn't play anymore when I switched between folders in the song. That nervs me up the whole time ...
Maybe someone can help or can tell me that's why we get ProKit 4.5

Dynex 32" TV (DX-32L151A11) - digital channel problems

My TV was working fine and I've had it for a couple months now - it would get all the channels with 3 or 4 numbers (115.5 etc) but now Mediacom has switched to all digital. I have the cable directly connected to the TV with no cable box and Mediacom screen says to rescan for channels. I rescan but I'm still getting the message. I noticed there is a DTV signal strength listed under Channel Setup in the menu but it's blacked out - no matter what option I choose (cable, cable box etc) and rescan the DTV signal strength is still blacked out with nothing showing. Is there another option in the menu somewhere to activate it? When I run autoscan it picks up digital and analog channels but then they are nowhere to be found when going through the channels. Is this a Mediacom issue or am I missing something with the TV? I ran autoscan 5 times this morning - should the DTV signal strength deal be showing something or is it normal for it to be blacked out/showing nothing? Thanks!

Sounds like they are all scrambled and you need a box now.
Crystal
Superuser
Forum Guidelines | Terms & Conditions | Community Guidelines | What is a Superuser?
*Remember to mark your questions solved and click the star to give kudos to show your thanks!*
While I used to be a Best Buy Employee, I no longer have any affiliation with Best Buy.
My opinions do not in any way shape or form represent Best Buy's Official decisions.

Saving a channel setup...

Similar Messages

Maybe you are looking for