Saving a document and user password

I tried to save a document online and when i tried to save it a box popped up saying that i needed a user password to unlock and save. Well i thought that i knew what that password was but when i typed it in it said that it was incorrect. This is my first mac computer so i have no idea what i am doing or where i could even find out what that password is?

rvdcdancer2000 wrote:
it is a document someone sent me and i am pretty sure that it was created using adobe and i did not download that yet onto my computer so do you think that could be why?
Call the person who created the document and ask them the password. If they password protected the document you can not open it unless they provide the password.

Similar Messages

  • What is the difference between saving to "Documents" and "Macintosh HD" and when should you use each one?*

    What is the difference between saving to "Documents" and "Macintosh HD" and when should you use each one?

    When you save to the folder with the little house icon, the file is placed at
    /Users/your_user_name/
    You would really have to go out of my way to save at:
    (the shortcut for the Boot Drive, regardless of its name).
    I am not sure how you decided that Time Machine is not saving your files. The default is for Time Machine to do incremental Backups of everything on all attached drives, except for certain temporary information in Cache files. If you have four Users, Time Machine will back them all up.
    Looking at the raw Time Machine backups will tell you very little, because it does lots of its work with Hard Links, and because it does incremental backups, so only files that changed since the last Backup are saved at thet cycle. The way to determine whether Time Machine is saving things is to display the window you care about in the Finder, then invoke the "Star wars"/ "Back, back, back in time" Interface.

  • Required Plant maintenance configuration document and user manual.

    HI PM consultant guruu2019s
    Could you please provide any PM implementation configuration document and user manual.
    If any link for the above, please provide and it should be free download link.
    Thanks and Regards
    JRP

    Hi,
    Refer link-SAP ERP ECC 6.0 PM configuration guide
    Regards,
    Sandesh Sawant

  • Required History record document and user manual of ERP System.

    Required History record document and user manual of ERP System. Please send if anybody have .

    In your example you aren't really doing anything. If you just put in something like 1 + 1, AppleScript will execute that (and you will get a result), but unless you actually do something with the information nothing is going to happen.
    Computers aren't like they are in the movies and are basically really stupid by themselves (and sometimes with help). When programming, you have to specify exactly what you are doing, what you are doing it with, how you want to do it, and handle other things such as the phases of the moon and various road traffic. The AppleScript Language Guide assumes a little bit of programming understanding (and even then some luck helps) - some other resources that might help get you started are the tutorials at macscripter.net.
    In the mean time, a System Profiler script that puts a basic profile into the specified file name/location would look something like:
    <pre style="
    font-family: Monaco, 'Courier New', Courier, monospace;
    font-size: 10px;
    font-weight: normal;
    margin: 0px;
    padding: 5px;
    border: 1px solid #000000;
    width: 720px;
    color: #000000;
    background-color: #B5FF6C;
    overflow: auto;"
    title="this text can be pasted into the AppleScript Editor">
    tell application "System Profiler"
    if (get documents) is {} then make new document -- make sure there is a document
    tell document 1 -- the front document
    set detail level to basic -- can also use full or mini
    save as text in (choose file name default name "Profile.txt")
    end tell
    end tell
    </pre>

  • SYSDBA and USER password

    I developed an app. with VB.NET and Oracle 9i. The database has a user name with which a user can work. I have to deploy my app. and submit entire documentation of database. There I need to mention the user name and password in case other person takes care of service later and need to re-install database, he may be able to create the schema.
    In that case, how can I secure the database so that the data is not tampered. The documentation contains the user name and password needed for the app.

    If you release the administrative or schema user password, the only warranty you have is to trust people who receive your application won't try to corrupt information.
    You could try, if possible to add checksum to the columns, it's a mean to at least detect unauthorized data modifications.
    ~ Madrid.

  • Network User ID and User Password

    When I try to connect to the IMAC on my Windows network, I can find the IMAC but I cannot log in to it. I have tried all the Users set up on the IMAC but nothing seems to work.
    What do I need to do?

    Hello and Welcome to Apple Discussions. 
    Have a read of the instructions that iFelix provides on his web site. Last time I had to network with a Windows PC they had me up and working in a couple of minutes.
    Let us now how you get on.
    cheers
    mrtotes

  • How to create relase stretegy diff for diff document and user specific

    Hello Experts,
                           I have created the release strategy for the PO with this i want that for different purchase order type i have different release  stretegy. Suggest me how to do this.
    Thanks
    Harmandeep

    hi,
    you can create a characteristic for the document type with BSART-CEKKO. then assign the different document types for different strategy  in classification while defining the strategy. so accordingly system will take different release stategy for different document type.
    regards,
    Anubhab

  • WHY, WHENEVER FIREFOX UPDATE I LOSE MY SAVED ID'S AND PASSWORDS?

    EVERY TIME FIREFOX UPDATES ITSELF, I LOSE ALL MY SAVED ID'S AND ANY PASSWORDS I HAVE SAVED

    Do you mean names and passwords in the Password Manager or do you mean that you are no longer logged on to (remembered by) websites after closing and restarting Firefox?
    Details like websites remembering you (log you in automatically) are stored in a cookie.
    It is possible that a website invalidates cookies when they detect a change in the user agent when Firefox is updated.
    If that is the case then there is not much to do about this.

  • Parking document and relase document.

    Hi,
    we are using Ecc5.0 version,
    we need this process.
    1. If user A has to park the all documents ( he should not get posting authorisation for these documents)and user B should post those documents.
    2. If user B has to park the all documents ( he should not get posting authorisation for these documents)and user A should post those documents.
    how to park vendor and customer payment related entries ( and also advance payments)
    please give me  any inputs on this issue.

    Hi
    You can activate the workflow so that an email will be triggered to the other authorised person to post the parked document. SAP delivers with a standard workflow WS00400004 which should be activated.
    if you have knowledge i shall send you a documentation to your email id or please seek the help of your ABAB consultant.
    in the standard workflow WS00400004 you have different tasks as below
    Workflow triggers based on the business object (BUS number) and triggering event.
    Triggering events are namily Created, Changed, Rejected, Completed
    Based on the triggering event you define in the task the workflow is triggering an email. It is very easy to configure.
    Whenever a parked document is created, the workflow system triggers an email to the other person who can view the parked document in his business workplace and post or complete the document.
    Please give me your email ID so that i shall send you the procedures for activating the workflow.

  • BDC not saving the Document

    Dear Friends,
    I have written the BDC for FB01. It's uploading all the voucher entries properly but after the last entry it's not saving the document and asking for new entry..
    What may I be missing? Any clues???
    Regards,
    Alok.

    Hi ,
    Use simulate button, to check and make sure the amount on both sides(DR/CR) are equal. If the problem is not solved then check for your BDC recording, is having any Popup's screens to fill the mandotary fields like cost center like that.
    Thanks,
    Bala.

  • Portege R500 - No response to user password

    Having just taken delivery of a new Portege R500, I was trying to make a bluetooth connection when a screen came up asking to set up both an administrator and user password. I set up the user password only, typing it in once (but was not asked to confirm it.) When I switched on the computer again there was a request for the password in the top right hand corner. But when I typed it in, nothing happens apart from the computer going off after 3 tries.
    It is the correct password but I did notice that when I was originally putting it in the series of *** only appeared with the second letter. Is there any simple solution or does it have to go back to the dealers? I have no data on it only have added programmes so far.
    Thank you for any advice.

    If there is nothing specially on the HDD I recommend you to use recovery image and make clean OS installation. After doing this there is second chance to make a Bluetooth connection.

  • Satellite A100 is locked due to the fingerprint BIOS & user password

    Hi all
    I've got my A100 at my job, with TouchChip fingerprint recognition a year ago. On the initial installation I have recorded my fingerprint from the windows interface.
    Six months ago, I had to reinstall windows XP because of a non repairable virus infection. I've installed WXP and downloaded all the drivers and additional software from Toshibas site.
    I have NOT recorded again my fingerprint, and I have NOT enabled the TouchChip software this time. My entire problem was only an annoying message at logon time that said "You haven't recorded your fingerprint yet . . ." and that was all.
    After a 2 week trip out of town ( My A100 was locked in my desk, powered OFF-no connection to mains) at the first boot, TouchChip software came back from the grave ! ! !
    "TouchChip Bios Extension" screen appeared after power on, and my finger is required to load in WXP ! ! !
    At WXP user logon dialogue the additional message "You haven't recorded your fingerprint yet . . . is still here, but I can NOT boot the machine at all, without my fingerprint. After some digging in PowerProtector suite (?) I found an option that said "Enable or Disable the use of fingerprint for BIOS System and User passwords" or something like that.
    I disable this, and the machine asks for reboot. This was the last time I saw the desktop.
    After the boot the system asks for password. BUT I HAVE NOT SET ANY SYSTEM OR USER PASSWORD!
    Is this possible?
    I've done something wrong?
    What's the solution?
    I'm locked out; I don't know why and how the BIOS is locked with a password (so I can't unlock it).
    Please somebody help.
    Regards, Georgios

    I don't know what exactly A100 notebook you have but it looks like the notebook was delivered with the preinstalled Vista OS.
    You have installed XP and the single XP drivers from the Toshiba page.
    But from my understanding the BIOS must be updated too! The Satellite A100 series supports an special XP BIOS version. If the BIOS was not updated then the notebook could run not correctly.
    I don't know if this could have a bad influence on the fingerprint but nothing is impossible!
    However, fact is that BIOS asks for the password. If you don't know this you will have to delete it on other way...and this can be done only by an authorized service provider in your country.
    Ask the technicians for the help and explain the whole story! Maybe they will remove the password for free!
    Bye and good luck

  • How to prevent public users from creating and saving Word Documents

    I have two public computers available for the public to view legal case documents.  The program used uses the Word shell to save, view and print documents within the program.  The clerk has stated that she does not want attorneys or others to
    be able to create and save word documents on these computers.  Is there a way to prevent a user on the public computers from opening word, creating a document and saving it?

    Instead of installing Word on the public computer (or at least instead of making it available on the public account), you could install the free Word Viewer:
    https://www.microsoft.com/en-us/download/details.aspx?id=4 and make that available for the public account. Alternatively, if you want to ensure the document retains its originally
    formatting regardless of what printer may or may not be attached to the public computer, you could keep only PDF copies of the file where the public can access them and install the free Adobe Acrobat Reader for viewing:
    https://get.adobe.com/reader/.
    Cheers
    Paul Edstein
    [MS MVP - Word]

  • I just got a new PC at work, and I saved all my files in my profile (Documents and Settings...).Being a new firefox install, I cannot recover my custom preferences (and passwords...)

    At work, I was asked to exchange my PC for a new one (...) at a moment where I was completely stressed and hardly could find time to do things correctly ( I had big issues with some UNIX servers consuming all my time, and more...) I saved the content of my profile in (Documents and settings) from the XP pro OS. REinstalled Firefox, but cannot find a way to recover or use the content of Application Data\Mozilla\Firefox... How can I recover? (bookmarks, custom stuff passwors etc...)

    Profile is a folder which store all your personal data in a safe place
    * https://support.mozilla.com/en-US/kb/Profiles
    * here explain how to backup profile https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
    * here explain how to restore it
    https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile

  • Firefox has remberd a password to a website ... chessatwork and I get loged in to my main page and when I click on any link it takes me right back to my log in page, where it has it stored.... password and user name,,, whats up and how do I turn that off?

    Firefox has remberd a password to a website ... chessatwork and I get loged in to my main page and when I click on any link it takes me right back to my log in page, where it has it stored.... password and user name,,, whats up and how do I turn that off? chessatwork has ran great for me for many yrs, then one day I down loaded firefox and went to play chess on this site chessatwork.com, well the window popped up asking to remember the log in and pass word and so I said ok, and it did, but now when I click log in and I go to my main page (home) and click on any link, say to play game I return right back to log in

    See http://kb.mozillazine.org/Deleting_autocomplete_entries<br />
    Remove a saved password here: Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
    You may also need to remove the cookies from that website.<br />
    * Tools > Options > Privacy > Cookies: "Show Cookies"

Maybe you are looking for