Saving a file to play back on a pc

I am using QT 6.5 I need to share a file that I editted in FCpro. I need to burn it onto a disk so someone can put it into a pc and use te video on teir computer. I have tide to save the file as a QT file.Will open on my G5 but not on my pc laptop. WHat am i missing. Video 48 mins long. thanks ahead of time.

codec? i kinda new to all this sorry
If you tried to export as a "QuickTime Movie," then you are using the DV codec. However, make sure you have ticked the "Self-Contained/Standalone" setting or else the file will reference the edited files contained in the FCP project to include any "rendered" material that may have been generated. (Believe the original default setting is "Reference Movie." If so, then you need to manually change it.) In any case, if you are actually attempting to export "Using" QuickTime, then you must select a specific codec or go with whatever codec is currently the default. Previous responder asked about the codec and whether or not the PC laptop had QT installed in order to eliminate one possible reason for file not opening on PC -- i.e., compression format incompatibility.

Similar Messages

.MTS files - Stereo playing back as mono

HUGE bone head move, hopfully someone has a resonably quick fix to offer.
Recorded video with the AF-100, .MTS file says stereo but only plays back in left channel.
Now after editing the project in an effort to fix the mistake,
In PPROcs5.5 I did the channel mapping to resolve this to stereo
so now those origanal .MTS files now play back as stereo.
Heres my problem.
In my haste to get this job edited I didn't pay attention to the audio tracks other than to sync the multiple cameras and tracks accordinly.
All of the origanal .MTS files were broken down into subclips , and those subclips are what are in the time line. (30 clips)
Those subclips do not allow me to change the channel mapping, the options are greyed out.
Is there a simple way to change these mono audio clips into stereo or at least play right & left or do I need to redo the whole project?
All resonable suggestions appreciated.

I think that what Harm was recommending was adding the appropriate Fill Left, or Fill Right Effect to get your 1-channel Audio Stream (in a 2-channel Clip), into both channels. Effects>Audio>Fill Left or Fill Right.
Good luck,
Hunt

I am having trouble bouncing and creating an aiff file that plays back. I've checked my output settings, and although I am able to create MP3s, the aiffs are blank. The happens when I try to export a track as an aiff file - it's blank.

I am having trouble bouncing and creating an aiff file that plays back. I've checked my output settings which appear to be correct. Although I am able to create MP3s, the aiffs are blank. The happens when I try to export a track as an aiff file - it's blank.

When bouncing, do you use the Key Command or the button on the Output Channel Strip? The Key Command only bounces from the Stereo Output. The bounce button bounces from the Channel Strip it is on. So if you want to bounce out outputs 3-4 or higher, don't use the key command, but the button.
The strange thing here is that Logic, when it bounces an MP3, first bounces an AIFF, which at the end of the bounce process is being converted to MP3, so I can't imagine how you can get a silent AIFF and a normal MP3.
How have you listened to those bounces? iTunes? Quicklook? Quicktime?

Mp4 files are playing back green

All of the mp4 files on my computer are suddenly playing back mostly green and pink video. I can hear the audio but the thumbnail and the video are green. If I hover over the thumbnail and press play they begin to play fine. I can then press the space bar while the thumbnail is playing and the file will open up and play normally using quick view. I am running 10.9.5 and also have the most rent version of VLC installed.

>I reset the TV but even it didn't work. It still didn't play the mp4 files
Did you do this correctly?
I mean you have to rest to default settings. In such case every option which has been changed, would be set to the default.
To do that you have to go to:
System Setup -> Reset TV
When the set powers back on, the Quick Setup screen will appear. Press OK to advance the setup and perform an auto tune.
Furthermore the user manual provides a list of Media Player Supported formats (page 93)
There is a list of supported formats for movie files and music:
_Music_ mp4 files are supported.
The files extension should be .m4a
The audio codec should be MPEG-2/4 LC-AAC
The max number of files in the folder: 1000
The _movie_ mp4 files:
The supported file extension: .mp4 or .m4v
The supported video codec: H.264 (MPEG-4 AVC), MPEG-4 part12,14
Supported audio codec: MPEG-1/2 Layer3, MPEG-2/4 LC-AAC and MPEG-4 HE-AAC

I want to open a file and play back by clicking play icon, but Audition doesn't react.

I've recently moved my computer with Windows 7 to Spain. Everything works fine, but not my Adobe Audition CS5.5. I want to open a file and click my play button, to play back the file, but Adobe doesn't react. Anybody know what could be wrong?

I would try checking your hardware setup to ensure that your playback device is selected and setup properly
From the main menu select Edit > Preferences > Audio Hardware

MTS files not playing back in Elements 10

My .MTS file is juddering in Elements 10. I've rendered and adjusted the frame rate to 50, but the video is still juddering and out of synch with the audio. Any tips?

Hi,
Are you talking about Premiere Elements?
There is a separate forum for that - you will probably be best asking your question there
http://forums.adobe.com/community/premiere_elements?view=all
Brian

WAV files play back too fast

When I choose File->Open to open an AIFF, MP3 or other file in Audition CS6, it simply plays back at normal speed. However, when I open a WAV file, it plays back at double speed (voices become high-pitched). NOTE: The sample rate (44.1) and bit size settings match exactly. This is not a sample rate issue. The frame rate is NOT set to custom.
This happens only to WAV files. The platform Mac OS X 10.8.3. Any ideas?

For some reason the songs seem to play back faster than they should. Any ideas?
How much faster? Have you timed the playback speed with a stop watch and compared the actual duration with the duration (Time) in the browser?
If youtube plays back slower, it might be caused by the network.
I have only seen this on iTunes for Windows so far - you are not by any chance on Windows right now, are you?
Are you running the latest version of iTunes?
And do you have any non-standard Audio devices installed - look at System Preferences > Audio > Output ?
Did you install any Audio Drivers?
Also look at the Audio Devices in Audio MIDI setup (Applications > Utilities):
Check the Format for you output device if it is set to 441000 Hz (compare the setting to the sample rate you see on your songs in the iTunes Library).
If this setting is wrong, iTunes may try to playback at the wrong speed.
Regards
Léonie

Videos with transitions have garbage when played back

I have recurring problems when inserting videos made with Keynote (6.5.3) and exported to QuickTime. Please see DropBox link for example video.
Image in video is 1500 x 1000 px, imported into Keynote in original size—no scaling.

Given the window size you cite, you are likely generating a very high bitrate video file and that could cause the symptoms you report. The iPad, where most *.ibooks files are played back, is 1024 X 768 so all of those "extra" pixels are not doing any good. Without access to the file, this is all conjecture. There are a lot of variables at work. Fortunately, iBA 2.2 now does a much better job of optimizing video than earlier versions of the optimizer did.. The optimizer does its best work when handed files with a reasonable bit rate. Share a link to that video file so we can scope it out and be more precise.

How to play back recorded audio?

After using the mic to record some audio, how/where do I access these files to play back on the iPod Touch Gen4?

Assumed that work, what's the convenience in having an iPod when I can't listen on the iPod? This is pretty dumb if all my field recording has to be listened on a computer.

I keep getting an error 2048 everytime I try to play back my Maya file that I saved as a qt movie. I just recently updated qt and this is when the errors would pop up. Before the update I had no problems. How can I fix this?

I updated quicktime a few days ago and now I keep getting error 2048 whenever i try to play back my Maya file after saving it as a qt movie. I had no issues with this before I did the update, after the update I keep getting the error 2048 message. QT will play my earlier Maya movies and other video, it just won't play back my latest work. Help me please, I need this for school.

The 2048 error message usually suggests the files use MPEG-2 format which is not supported natively on Windows via QuickTime without the additional MPEG-2 Playback Component ($20 from Apple).

Slow playing back swf files

Hello,
I am running OSX 10.4 11 server and have an internal web site I am running. It's on a G4 Xserve with 4GB of RAM. Not that many people access the internal site so I don't think it's the load, but I guess you never know.
anyhow, I created this swf file about 400k and they are very slow opening and playing back.
any clues on what it may be or what I can check?
Thanks,

The way your doing it now can get really confusing over time.
save a reffrence in an object or an array that would indecate to you if it was loaded allready or not for example the full switch you have up there could of been this instead:
1. give your clips there URL so you don't need to ask for it again if your working with movielclips for your buttons or if you created a class for them just give it a public var such as 'actionURL'
so for example
btn1.actionURL = 'link1';
btn10.actionURL= 'link10';
now that everything knows what it loads all is left is for you to now follow after things
1. when the buton is clicked you can ask itself what is the url e.target.actionURL
2. you can then have a flag (boolean value such as isInTransition) that lets you know if there is an animation going on
2.1 there is no animation so lets load it up
2.2. ther is an animation so lets save the data and wait for the animation to complete before we start the load
and thats about it
if you want to save a reffrence to if the clip was loaded or not you can save your result in many ways one of them could be an object/array that holds everything that was loaded already
var oLoaded:Object= {};
onLoadNewItem(e:Event):void{
   if(!oLoaded[e.target.actionURL]){ i was never loaded before
       oLoaded[e.target.actionURL] = new Loader(....
   }else{
       oLoaded[e.target.actionURL] //here is my loader do with it what ever you want to do
hope this hit the nail on the head

My daughter had completed a chart in pages. I saved it and then clicked on other chart types. Now I can't go back to the original chart she made even though I have not re-saved the file. How can I go back to her original chart with data?

My daughter had completed a chart in pages. I saved it and then clicked on other chart types. Now I can't go back to the original chart she made even though I have not re-saved the file. How can I go back to her original chart with data?

I don't get what you are saying.
Is this all the same document?
What version of Pages?
Have you tried to revert to a previous version?
Peter

Need advice on encode settings for Premiere file to be played back on DVD

Hi - hoping someone can help me with my encoding settings. I seem to be on the right track because everything looks good until you play the video on DVD.
I use Windows Movie Maker to encode my exports to DVD. This software does not accept MP4 but it seems to accept a variety of other files and one is WMV. I first exported a WMV clip from Premiere at 1920x1080 (the raw video and graphics are also in that size). Then I exported another WMV clip to 1280x720. I just wanted to see what both of them look like on a DVD during play back.
Here are the export settings:
Here is what the1280 WMV looks like when it's played back on my desktop computer in Windows Media player. As you'll see everything looks very clean:
I then imported the 2 WMV clips into Windows Movie Maker, selected the 16:9 settings, and it encoded them into a finished DVD. I then played the DVD back on my 50 inch TV in my living room. Below you'll see a photo I took of the 1920 clip; notice how the text looks jagged:
Then the photo below of the 1280 clip looks much cleaner.
But obviously I'd like for the finished DVDs to look if possible even cleaner than the 1280 photo above - hopefully like it looks in the photo of the WMV playing back on my computer. These videos will be distributed to different local offices.
Are my WMV settings correct? Should I export to other than WMV? How can I improve on the 1280 DVD photo above so everything looks even cleaner (if possible)? I have Adobe Encore - should I use that instead of Movie Maker?
Any help is appreciated. Thanks.

A DVD is 720x480 so anything larger must be scaled down to be legal according to the DVD specification
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

Weird timing issues when playing back a recorded sound file and with synths

Hello there,
I'm having a couple of strange issues with playing back files that I have recorded using MIDI data which is then used to play an external synth which then gets recorded to an audio track which at the time is perfectly synced to a click track.
The problem is (and I really dont get why this is happening) when it comes to playing back the recorded audio file that sometimes it is either behind or ahead of the beat.
This makes absolutely no sense because sometimes it IS in time with the beat and other times when I play through my piece it is obviously out! I haven't moved the audio file in the arrange window and it is a permanent .aiff file that is stored on my hard-drive...what on Earth is going on?
On a side note, the same problem happens with any of Logic's synths when I use an LFO that is supposed to be synced to the beat. Sometimes when I play back the MIDI data it is perfectly synced and in time and other times it is horribly out. It really is just pot luck!
Anyone got any ideas?

Thank you supermacmom!
I have the LifeProof case for the iPhone5, and I remember the instructions saying that any protective screen cover should be removed before enclosing the phone into the case, but I left mine on with no ill effects.
But I should have taken off the back protective film, which was covering the video mic!

ITunes skips/pauses when playing back .wav or .aiff files

Hello all,
Ever since I upgraded to iTunes 6.01, every .wav or .aiff file I play results in skipping playback. Sometimes the sound will pause, other times it will skip half a second or more. It sounds like a scratched CD without the screeching.
The iTunes visualiser goes 'flat' during these periods of silence, implying that it thinks the silences are breaks in the music. Rewinding the skipped portion usually results in it playing back satisfactorily, although it will continue to skip throughout the remainder of the track, as it would have done without my intervention.
They still skip when opening the files in QuickTime Player, although not as much - perhaps once a tune rather than the five-almost constant in iTunes. Also, they worked perfectly in both programs before I upgraded to 6.01.
Anyone else having this problem, or is it just me?
I've sent feedback to Apple, but other than that, I'm at a loss as to what to do. Any suggestions?
Thanks for your time,
Tony Ghirra
Powermac G5 Dual Processor 2.3 Mac OS X (10.4.3) 2.5 Gb RAM

I updated the AE firmware and made sure my airport and AE software were current, but the problem is still there. One thing that makes it hard to track is that the amount of skipping varies during the day, so sometimes it will play an album without skipping, and others it will skip a few times per track (i.e. unlistenable). Still fiddling with channels to see if that helps...
There is one peculiar thing that happens only with playback involving AirportExpress, even if there are no skips in the track:
When iTunes approaches within (approx) 10-15 seconds of the end of a song, it will jump the time-display forward to the beginning of the next song: then the display will wait at the 0-second mark of the new song till the current song almost finishes (it will clip a couple of seconds off the end): then iTunes will start playing the next new song.
G4 iMac Mac OS X (10.3.9)

Saving a file to play back on a pc

Similar Messages

Maybe you are looking for