Saving A Track with the Chain of Plugins

How do is save a track from one project that has the eq, compressions, and effects that on want, and open it in another project?
I want to unify drum and guitar sounds.
Thanks in advance!
Sean

This does not include the audio content. Instead, you use +Selective Track Import+ from the Browser.
Christian

Similar Messages

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille

Downloaded Mt Lion. Now my facetime launches then quits with message that there is a problem with the C_L Kernel Plugin. Everything else works just fine. I can get on line etc.

I have have an early 2008 imac 8,1 It has been a good machine no problems. UNTIL we downloaded Mt Lion. We can no longer use facetime. We click on the icon it comes up, tries to connect then it disappears with the message that there was a problem with the C_L Kernel Plugin. We can go on line without difficulty, everything else seems to be working. Searching the internet shows that others have had the same problem with Mt Lion. But so far I haven't found a solution. We have wiped the drive reloaded snow leopard then downloaded Mt Lion again. We put in a NEW hard drive and reloaded snow leopard then Mt Lion. We have changed out ram using apple ram. But we still get the same result. Everything works except for Facetime. Is there some patch we have missed? Facetime DOES work on our ipads without a hitch so I doubt it's the internet connection. We've tried the imac both wirelessly as the ipads run and hardwired and get no where fast. So any help at all would be appreciated. We live in the boonies, the nearest mac repair is over 150 miles away so this is pretty nuch a do it myself affair. We know the machine is old by most standards today. But we pretty much run our machines until they can't power up. So we'd like to get this one back on its perch so to speak with its face time working.
Thank you ahead of time for any advise help given.

A log may help determine what the issue is ...
Open the Console app located in HD > Applications > Utilites
Select: System Diagnostic Reports on the left.
Copy and paste the most recent kernel panic or crash log in your Reply.

I just installed the latest Security update and now I can't open iPhoto. I keep getting a message that it quit unexpectedly because of a problem with the scene kit plugin. I have no access to my photos.

I just installed the latest security update and now I cannot access iPhoto. I keep getting a message that it quit unexpectedly due to some conflict with the Scene Kit plugin.
I'm using a Macbook Pro Mavericks Version 10.9.5

Probably the reboot used to log into the Guest account and then your account again fixed the problem. If often will.

How can I edit imported audio track? After selecting and deleting region and joining remaining parts, it keeps playing the track with the deleted part! What am I doing wrong?

How can I edit imported audio track? After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
What am I doing wrong?

After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
What am I doing wrong?
How exactly are you doing this?
When I cut out a part of an audio region, then drag the remaining parts together, so they are touching, the track will skip the cut out section when playing the file. Also, if I select the remaining parts of the region and use the command "Edit > join regions". This will create a new audio file with the cut out part deleted.
You should see this prompt, when you are joining the regions:

Fade in/out several tracks with the crossfade tool?

Can I Fade in/out several tracks with the crossfade tool? I mean without selecting them and then add value...? just like in ProTools just selecting the regions and apply the fade tool???? VIP question

The Sound Factory Studio wrote:
Can I Fade in/out several tracks with the crossfade tool? I mean without selecting them and then add value...? just like in ProTools just selecting the regions and apply the fade tool???? VIP question
No.
To add crossfades or fade in/outs to multiple audio regions, you must do it from the fade parameter box, either entering numerically, or by clicking and dragging on the numeric value.

Problem with the weblogic-maven-plugin

I am in the process of converting from ant to maven, but I am having a problem with the weblogic-maven-plugin. Has anyone used this plugin successfully? Here is the error I am receiving even though I have a dependency on the xbean.jar in my pom, and it is in my local repo.
java.lang.NoClassDefFoundError: com/bea/xml/XmlException
at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescript
orManager(AbstractDescriptorLoader2.java:301)
at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescript
orBeanFromReader(AbstractDescriptorLoader2.java:749)
at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescr
iptorBean(AbstractDescriptorLoader2.java:376)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescrip
torBeanWithoutPlan(AbstractDescriptorLoader2.java:720)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescrip
torBean(AbstractDescriptorLoader2.java:729)
at weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescri
ptor.java:134)
at weblogic.servlet.jsp.JspcInvoker.parseDescriptors(JspcInvoker.java:27
6)
at weblogic.servlet.jsp.JspcInvoker.compile(JspcInvoker.java:187)
at weblogic.application.compiler.AppcUtils.compileWAR(AppcUtils.java:353
at weblogic.application.compiler.WARCompiler.compile(WARCompiler.java:78
at weblogic.application.compiler.flow.AppCompilerFlow.compileInput(AppCo
mpilerFlow.java:118)
at weblogic.application.compiler.flow.AppCompilerFlow.compile(AppCompile
rFlow.java:43)
at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDri
ver.java:69)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineD
river.java:26)
at weblogic.application.compiler.FlowDriver.nextState(FlowDriver.java:36
at weblogic.application.compiler.FlowDriver.run(FlowDriver.java:26)
at weblogic.application.compiler.Appc.runBody(Appc.java:163)
at weblogic.utils.compiler.Tool.run(Tool.java:158)
at weblogic.utils.compiler.Tool.run(Tool.java:115)
at weblogic.application.compiler.Appc.main(Appc.java:174)
at weblogic.appc.main(appc.java:14)
at jrockit.reflect.InitialMethodInvoker.invoke(Ljava.lang.Object;[Ljava.
lang.Object;)Ljava.lang.Object;(Unknown Source)
at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;
I)Ljava.lang.Object;(Unknown Source)
at weblogic.ant.taskdefs.j2ee.CompilerTask.invokeMain(CompilerTask.java:
290)
at weblogic.ant.taskdefs.j2ee.Appc.privateExecute(Appc.java:250)
at weblogic.ant.taskdefs.j2ee.Appc.execute(Appc.java:159)
at org.codehaus.mojo.weblogic.AppcMojo.execute(AppcMojo.java:180)
at org.apache.maven.plugin.DefaultPluginManager.executeMojo(DefaultPlugi
nManager.java:412)
at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(Defa
ultLifecycleExecutor.java:534)

Here is what you need to get the maven-weblogic-plugin appc goal to work:
<project>
<build>
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>weblogic-maven-plugin</artifactId>
<version>2.9.0-SNAPSHOT</version>
<configuration>
<inputArtifactPath>${basedir}/../../jar/broker.war</inputArtifactPath>
<verbose>true</verbose>
</configuration>
<executions>
<execution>
<phase>package</phase>
<goals>
<goal>appc</goal>
</goals>
<inherited>false</inherited>
<configuration>
<verbose>false</verbose>
<debug>false</debug>
<projectPackaging>war</projectPackaging>
</configuration>
</execution>
</executions>
<dependencies>
<dependency>
<groupId>com.sun</groupId>
<artifactId>tools</artifactId>
<version>1.5.0</version>
</dependency>
<dependency>
<groupId>weblogic</groupId>
<artifactId>wlxbean</artifactId>
<version>9.2</version>
</dependency>
<dependency>
<groupId>weblogic</groupId>
<artifactId>xbean</artifactId>
<version>9.2</version>
</dependency>
<dependency>
<groupId>weblogic</groupId>
<artifactId>weblogic-container-binding</artifactId>
<version>9.2</version>
</dependency>
<dependency>
<groupId>weblogic</groupId>
<artifactId>wlw-util</artifactId>
<version>9.2</version>
</dependency>
<dependency>
<groupId>weblogic</groupId>
<artifactId>javelinx</artifactId>
<version>9.2</version>
</dependency>
<dependency>
<groupId>weblogic</groupId>
<artifactId>wlw-langx</artifactId>
<version>9.2</version>
</dependency>
<dependency>
<groupId>weblogic</groupId>
<artifactId>bcel</artifactId>
<version>5.1</version>
</dependency>
</plugin>
</build>
<dependencies>
<dependency>
<groupId>weblogic</groupId>
<artifactId>wlw-langx</artifactId>
<version>9.2</version>
</dependency>
</dependencies>
<project>
You need to install/deploy all of the above dependencies manually into your repo.

Compatibility and using NB6.8 with the IdM IDE Plugin

What compatible versions of IdM - NB - IDE Plugin work together ?
I recent versions: IdM 8.x and NB 6.8
but I don't see that there is a plugin version compatible with NB.v6.8.
My IDE is version 8.1.0 of the .nbm
The last link claims to have code that will allow the IDE .nbm to work with NB 6.8
[How To Setup An IDM Project|http://wikis.sun.com/display/sunidmdev/How+To+Setup+An+IDM+Project]
[Identity Manager IDE|https://identitymanageride.dev.java.net/]
[IdM plug-in for Netbeans 6.8|http://waveset.allidm.com/?p=38]
Last link, from an April 2010 blog post.
Any comments, suggestions on this ?
I'll probably be trying it myself, and maybe be able to give my feedback shortly
TIA

i_dvlp wrote:
What compatible versions of IdM - NB - IDE Plugin work together ?The officially support version of the IDM for IDM 8.1 is Netbeans 6.1.
I've been able to use the IDM plugin in Netbeans 6.5.1 without issue. I tried and did manage to get it to work in Netbeans 6.8 but I needed to add the org-netbeans-modules-editor-deprecated-pre61completion.nbm module for it to work or even install properly. (I think I got the compat module from http://dlc.sun.com.edgesuite.net/netbeans/updates/6.5.1/uc/final/stable/modules/ide10/ but it's been a while.) Even with the deprecated module there were numerous bugs in Netbeans 6.8 with the IDM 8.1 plugin. Thinks like context menus and auto completion just didn't work right. At the end of the day I don't really need Netbeans 6.8 so I went back to 6.5.1.
So, short answer, you can get Netbeans 6.8 to work with the IDM plugin but there are bugs.

Loading Tracks with the Same Name

Hi all, brand new iPod owner here! I have some bootleg concerts that I want to load up. I've done two shows successfully, one from a CDR and one direct from my PC's hard drive. All the tracks for these two shows have different names.
Now..... what if I want to load other concerts that have some of the same songs, i.e. the tracks have the same name as those already in my library? How will I pick out the right "version" to add to the new playlist? Is there a way to put the tracks in their own folder in iTunes so they don't get mixed up with the ones already in there?
I appreciate any information or advice you can give me! Rock on!
iPod 30GB Windows XP Pro

A different album name...
By bootleg, you mean illegally recorded concerts with copyright infringement?

Saving a pdf with the latest version?

According to what I have read online, versions of adobe acrobat 8 and higher will save the latest pdf version out to version 1.6. I am using adobe acrobat pro 9 and when I create or save a pdf it is saving version 1.5. Can anyone let me know if there is a dropdown or something that chooses the latest version.

What you have read is misleading at best.
The latest PDF version is PDF 1.7, which Acrobat 8 is capable of making and reading.
However, recent versions of Acrobat will look at the PDF to see whether it needs to be marked with the latest version, and if not they will mark it as older. This allows more old software to work seamlessly. You cannot stop this.

Arranging tracks with the Zen Stone P

I've recently upgraded from a Zen Nano Plus to a Zen Stone Plus. With the Nano I had?Creative Zen Nano Plus Media Explorer, which allowed me to change the order of tracks?in a folder and number them automatically. Zen Nano Plus Media Explorer?doesn't work with the Stone, so any arranging and numbering of tracks has to be done manually, which is a right pain.
Is there a version of Creative Media Explorer available for the Stone Plus, or perhaps some third-party alternati've that would allow me to do the same thing? Thanks in advance.

I have the Stone (not Stone Plus) ... it doesnt have bookmarking, but it does have the ability to fast forward/rewind by holding down the skip fwd/back keys. Also (and I dont know if this is a function of my audiobook or of the player), it seems to create a .pos file next to my audiobook file, so if i move from an audiobook to my songs and then back, it picks up the audiobook where i left off.

Question about auto-saving multiple files with the same template

Is there any way to do this? The template will never change - but I will need to save it as a new file each time I open it. Just want to know if there is an automatic way to do this when the template is opened each time? Preferably numeric, starting from any number. I suppose I can just save each file myself - but as it gets up into the thousands of files - I'm not going to want to.
It would be really cool if it could auto-save the file, assign it a number, and then place that number in the top corner of the saved document.
If anyone can help - let me know. C.

OK. First add a text field to the document, say "text1". You probably want it to be read-only. You can duplicate it to all pages if needed. Then open the template document, open the interactive JavaScript console (Ctrl+J), and enter the following code:
// Interactive Console JavaScript
// Get the folder this file is in
var folder = path.replace(documentFileName, "");
// Save multiple copies (from 1 to 9)
// with the number in the text field
for (var i = 1; i < 10; i += 1) {
getField("text1").value = i;
saveAs(folder + "template" + i + ".pdf");
After you paste the code, highlight the lines and press Ctrl+Enter (or the Enter key on the numeric keypad) and Acrobat will save multiple copies to the same folder as the template. Replace "text1" with the name of the field you've set up and "template" with the name you want the copies to have before the number.

Adjusting multiple mono audio tracks with the Audio Mixer

Anybody know how to adjust multiple mono audio tracks simultaneously with the audio mixer? If your tracks are stereo, one fader will control two faders or audio tracks. Suppose you have 6 mono audio tracks and don't want to pull down each fader separately. Is there a way to pull down one fader and have the others locked to it, or controlled by it?

Not with the sliders, but you can adjust levels with ctrl [ and ctrl ] (I think, not at fcp right now).
The autoselect buttons (to the right of the lock icons, at the head of the timeline) tell fcp which track to adjust...
Rienk

Multiple video tracks with the same audio track

How do I get DVDSP to play the same audio track on 3 different video tracks without having to repeat the audio on each of the 3 video trax?
Seems simple, but I can't find an easy way to do it.
Anybody got any ideas?

Yes they are all one continuous stream with the same GOP structure and everything. I had to export them as QT movies from FCP to get them all the same. I only exported the video though becuase the audio was going to be the same for all the tracks, & it was already done as AC3 through Compressor. Which brings up an interesting question; why does DVDSP convert the AC3 audio to .aiff which is a much larger format?
I'm trying to go back and look at the encoding log from DVDSP to see what error it gave.
It doesn't give the error in the log since I had shut down my computer last night, so I guess I'll have to try the build again and see what error it gives.
I'm looking at the parsing files and .m2v files that DVDSP did during the build, and it parsed all 3 angles, and finished the .m2v file of the medium shot, including 6 minutes past the point I told DVDSP to stop it. (When exporting the QT movie from FCP, I had forgotton and encoded the whole 2:30:00 show instead of the 1st 1/2 of 1:16:47:15, and then just adjusted the end of the clip in DVDSP).
The wide shot and Close up .m2v files, and the audio .aiff file were in the folder, but have nothing in them. The Video_TS folder and Audio_TS folder are also there, but with nothing in them, so whatever happened, seems to have happened in the medium shot encoding process.
I'm pretty much over this multi-angle thing, and I'm going to start working on an edited version of this today because all I have to do is make the cuts between cameras, since the audio is already mixed. However, if you have any other ideas, please let me know.

Hi, I need help with the dates of plugins added to my browser

Hi I need to know what date a plugin was installed on my browser.
openh264 / video codec provided by cisco systems.
If you can't help, please point me in the direction of someone who can?
Any help greatly appreciated.

The new "OpenH264 Video Codec provided by Cisco Systems, Inc." plugin that now shows up in the Firefox Add-ons Manager Plugins list was added in Firefox 33.0. It's installed in a subfolder of your [[Profiles|Firefox profile folder]], which you can confirm by typing '''about:plugins''' in the Firefox address bar to bring up a list of installed plugins (details [http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins here]) and checking its "Path" entry .
The first link in the [https://www.mozilla.org/en-US/firefox/33.0/releasenotes/ Firefox 33.0 release notes] under What’s New, has this:
'''New''' | [http://andreasgal.com/2014/10/14/openh264-now-in-firefox/ OpenH264 support] * (sandboxed)
[*] Quoted from the linked page, http://andreasgal.com/2014/10/14/openh264-now-in-firefox/
(which also includes a [https://andreasgal.files.wordpress.com/2014/10/openh264.jpg screenshot] of the Add-ons Manager entry):
<blockquote>Today in collaboration with Cisco we are shipping support for H.264 in our WebRTC implementation. </blockquote>
<blockquote>Cisco has agreed to distribute OpenH264, a free H.264 codec plugin that Firefox downloads directly from Cisco.</blockquote>
<blockquote> Note: Firefox currently uses OpenH264 only for WebRTC and not for the <nowiki><video></nowiki> tag, because OpenH264 does not yet support the high profile format frequently used for streaming video. We will reconsider this once support has been added. </blockquote>
See also:
*https://wiki.mozilla.org/Media/WebRTC
*https://wiki.mozilla.org/GeckoMediaPlugins

Saving A Track with the Chain of Plugins

Similar Messages

Maybe you are looking for