Saving and Typekit errors?

Hi,
I've just uploaded Reflow and started to try out some very basic layouts.
However, pretty much every time I try to save or save as the program simply shuts down, followed by the unexprected error message. In addition when I try to use and of the Typekit fonts none of them appear to work in my layout?
Has anyone had similar issues?
Thanks
Spencer

Hi Spencer,
Sorry to hear that you're having trouble using Typekit in Reflow. Did you remember to add "localhost" to the domain listing in your kit? This is required for the Typekit fonts to show up in the Reflow project.
To add domains, go to http://typekit.com and launch your Kit Editor. Click Kit Settings in the upper right corner and add your domain to the domains field, then save your settings. When you're done, republish your kit. The fonts will be available within a few minutes of republishing.
The "Using Typekit Fonts with Reflow" blog post shows how to make this edit as well.
If you have the domain listing and still see problems with the fonts loading, please send the kit ID that you are using and I'll take a look. Thanks!
-- liz

Similar Messages

While importing a CD into my iTunes library I kept getting the following error message- iTunes library cannot be saved- An unknown error occurred (-54). What does this error mean and what can I do about it??

While importing a CD into my iTunes library I kept getting the following error message- iTunes cannot be saved- An unknown error occurred (-54). what does this error mean and what can I do about it??

The CD I imported (in the above post) is now not in my iTunes library. Any help would be appreciated .

The error message I get on my PC is "The ITunes library file cannot be saved" An unknown error occurred (-50)and my music library has disappeared. I recently tried to copy a CD to my library - it appeared to copy ok but then did not appear in my music li

The error message I get on my PC is "The ITunes library file cannot be saved" An unknown error occurred (-50)and my music library has disappeared. I recently tried to copy a CD to my library - it appeared to copy ok but then did not appear in my music library. The library does not show up even when my iPad is connected to my PC. My entire library is now held on my iPad and I wish to have it in iTunes so I can sync my iPhone to it as well. Help?

Don't know what changed today but it downloaded and installed on the shuffle. So far so good.

Where to control and give error message before saving trade promotion?

Hi Gurus,
our CRM system is upgraded from 5.0 to 7.0 and we have some problems. One of them is, in 5.0 version, we check some conditions and display error message in the AUTHORITY_CHECK method of CRM_MKTPL. So the check is made and message displayed if errors found while entering the trade promortion, at the beginning. And it does not allow any save action too. After upgrade I write this code to CHECK_AUTHORITY method of CRM_MKTPL_OL_OBJ. Now it is not make a control while a trade promotion is entered, so it doesn't stop saving trade promotion although there are errors. I can stop saving maybe in the method of CHECK_BEFORE_SAVE? But how can I display own check messages at the beginning of trade promotion? Please give idea.

Astron,
There are multiple BADIS for the Trade Promotions.
Use CRM_MKTPL_OL_OBJ for Header Valiadtions and CRM_MKTPL_OL_ASG for the Item (assignment block validations).
You need to use CHECK_ATTRIBUTES method of these BADIs to raise any errors.
Just append you message to ET_MESSAGE_LOG and set EV_HAS_ERRORS to 'X'.
If you need an error message on SAVE, use CHECK_BEFORE_SAVE method of the CRM_MKTPL_OL_OBJ BADI and append the messages and Mark REJECT_SAVE to 'X'.
Further there are many methods that trigger on different events like Status change etc.,
Regards,
Masood Imrani S.

When editing a template and making changes then saving and closing I get this error any idea?

Have a user who is on Sharepoint office 365 online and when trying to center a excel spreadsheet icon link to center on a organizational report template then saving and closing the user receives this error:
An expected error has occured
Trouble shoot issues with Microsoft Sharepoint foundation
Correlation ID 0952719c-af2e-20a4-9ee6-e98b1a457d0a
Any clue what this error indicates?
Best regards, Joe C Partner Online Technical Community ----------------------------------------------------------------------------------------- We hope you get value from
our new forums platform! Tell us what you think: <a href="http://social.microsoft.com/Forums/en-US/partnerfdbk/threads">http://social.microsoft.com/Forums/en-US/partnerfdbk/threads 
</a>------------------------------------------------------------------------------------------ This posting is provided "AS IS" with no warranties, and confers no rights <hr>

Any ideas? And Melbourne is right SP 2013 online would be impossible to view those logs unless I open a ticket with MS
Best regards, Joe C Partner Online Technical Community ----------------------------------------------------------------------------------------- We hope you get value
from our new forums platform! Tell us what you think: <a href="http://social.microsoft.com/Forums/en-US/partnerfdbk/threads">http://social.microsoft.com/Forums/en-US/partnerfdbk/threads 
</a>------------------------------------------------------------------------------------------ This posting is provided "AS IS" with no warranties, and confers no rights <hr>

In Illustrator CS5, while file saving and opening, the PARM error shown. How to fix it.

In Illustrator CS5, while file saving and opening, the PARM error shown. How to fix it.

Have you tried here:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

The iTunes library file cannot be saved. and unknown error occucrred (-54)

The iTunes library file cannot be saved. and unknown error occurred (-54)
Help!! What does this mean?

Hi Mr.Jones,
I started with the questions marks because I did not understand what you were asking.
I had the impression that yo wanted to make a backup of the Library.
The Library is "saved" in it's standard folder when you change something. Restarting iTunes, or even restarting the Macbook normally solves problems.

Excise invoice is not saving and not showing datas

in erxcise invoice i ve made settings as per the sap best practices then also the excise invoice is not saved and not generated also
please help me to solve the problem
the error is coming like this
Error in allocating Excise invoice number Interval not found Number object J_1IEXCLOC
Message no. 8I336
i ve already maintainthe number range for this object in tool in tax in goods moment
please give some better advice for the excise invoice setting.

Sub Transaction type determines the subcontracting attributes and determines the accounts for the posting while doing a sub contracting transaction.
Sub transaction type is also used for determining the accounts while
doing excise removals.
Within CIN the account determination is based on the transaction type.
So normally you can have a single set of accounts for Excise
utilization. In case you need alternate account determination for
handling various scenarios you can define sub transaction types. The
sub transaction types and corresponding account assignments needs to be
maintained in CIN customization
To make customization of Sub Transaction type, goto
SPRO --> Logistics General --> Tax on Goods Movements --> India --> Account Determination and check whether you have assigned second and third one, viz. "Specify Excise Accounts per Excise Transaction and Specify GL Accounts per Excise Transaction".
Check
Taxes on goods mvnt--indiaaccnt determination---specify excise accnts for excise transaction...maintain the sub transction type , ip or 01,
against the appropriate ETT
Message was edited by:
sam masker

While saving PO the error in message is &5&6&7&8? What it means?

Hi All,
While saving PO the error in message is &5&6&7&8? What it means?
I am working with the US Tax procedure TAXUSJ.
I saved the purchase order without giving the tax code and with jurisdiction in PO, Incompletion populated as above message and after save po number end up with message termination with following message.
Error Info... FF 718: Tax code & does not exist for jurisdiction code &
Can any body suggest me to fix this problem.
Thanks in Advance,
Lawrence Reddy.

Hi,
First check in t.code:OX10, jurisdiction code TAXUSJ is assigned to your plant or not, if not assign it and save.
Now use t.code: OBCL & assign your tax code {see tax code must be input tax} with jurisdiction code TAXUSJ to your company code and save.
Now try creating PO.
NOTE:
Also check all t.codes with assignments:
1.OBBG,
2.OBCO,
3.OBYZ,
4.OBCN,.
Regards,
Biju K

The document could not be saved. Write error.

I have a portfolio with a OneNote section embedded in the portfolio. When I attempt to save the document, I get an error message stating, "The document could not be saved. Write error." The document is stored on a network drive. Other users are able to make edits and save. I am using Acrobat x, Windows 7, and SharePoint 2010. I am unable to find any solutions on the web.

*Bump*

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
You can find it here:
[Ann] Identify Your InDesign File
If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
In regards of the script showing a result for InDesign files higher than CS6:
CS7 = CC v9
CS8 = CC v10 = CC-2014 or CC2014.1
Uwe

CS5 indd files occasionally change after saving and reopening

Occasionally the contents of my InDesign document will change after saving and re-opening. No errors reported during the save however when the file is opened a text box may be out of place or leading may be messed-up on a few random pages or some of the recent changes may not have been saved. Any ideas?

There was no direct indication that you created the code in a standard module. I asked because you reported that the code works in the sample workbook that you downloaded but not in your own workbook.
I don't know what else to suggest at the moment.
Could you create a stripped-down copy of the workbook (without sensitive information) and make it available through one of the websites that let you upload and share a file, such as Windows Live SkyDrive (https://skydrive.live.com),
FileDropper (http://filedropper.com) or DropBox (http://www.dropbox.com). Then post a link to the uploaded and shared file here.
Or register at www.eileenslounge.com (it's free) and post a message in the Excel forum. You can attach files up to 250 KB to a post there (zipped if necessary).
Regards, Hans Vogelaar (http://www.eileenslounge.com)

SAP Query and runtime error CREATE_OBJECT_CLASS_NOT_FOUND

Dear ABAP gurous,
I have created a query connected to an infoset. It worked fine. When I made a minor change to the infoset (checked, saved and generated afterwards) I couldn't run the query. Now, the problem is, when I run the query, the ABAP runtime error occurs:
Runtime Errors CREATE_OBJECT_CLASS_NOT_FOUND
Except. CX_SY_CREATE_OBJECT_ERROR
Can somebody tell me what causes the problem? Did I miss to do something after introducing this minor change to the infoset?
Thank you in advance and regards
Rafal Kosinski

In the infoset I had tables join (FEBKO+T001) and additional field group. For the field group I defined a field for which a code was created (a function module call). It worked for this setup.
Then, I just made a change in the code: in the function module call, I changed
sy-datum to febko-azdat for parameter DATE of the function module.

The iTunes library file cannot be saved an unknown error occured (-50)

Eever sincd June 29th I have gotten the following error message when trying to sync my ipod
"The iTunes library file cannot be saved an unknown error occured (-50)' and the library does not update. I have re-installed (repaired) iTunes. It doesn't help.
Any advice. I subscrive to a lot of podcasts and i can't update anything.
Help Please

Just letting you know that I have also had that problem since downloading that "update" for itunes.
All of my new music that I have tried to transfer from my E-music file will not be accepted. error -50 keeps popping up.
I have seen a few others post this same question, but I have been unable to find an answer for it.
If anyone has come across what this problem is, please help.

Outbound delivery was created saved and deleted

Hello,
I created some outbound deliveries and SAP's system said that the outbound was saved (and gave me the number).
After fiew minutes I received a SAP mail to inform me that the document was updated.
After this, when I tried to view it and SAP said that the document does not exist...
I Don't know what to do ???
I verify all the configuration with NACE but I don't find and solve the problem.
Does somebody can help me , please ?
Regards.

Hello, Patrice
Did you got any Exception some thing like: Express updated was terminated (i.e, an Abap shortdump /Type of Error)
If you got the above message while you are Saving or at the time of Saving the Outbound delivery creation.
Then, certainly physically there is NO Outbound document is present in the system. This may be due to not updating the Abap tables while saving (system may throw this kind of exception at the time of saving
Or
Sometimes when you go to display the document which is already created)
Suggestion: If you got similar to the above, then you need to analysize the issue with the help of Abap /Basis consultant.
Hope this will clarifies you,
Reward, if it helps,
Regards,
Srin.K

Saving and Typekit errors?

Similar Messages

Maybe you are looking for