Saving as multi-page more than once

I recently figured out how to create multiple pages through Illustrator by saving as a pdf with page tiling. It works the very first time you save the file. Then, I try to save the file again after making corrections and the box that is normally in the print dialogue to make a multi-page pdf is not selectable anymore. I have been creating a new document and copying and pasting my imagery into a new document to save it for the "first time." Otherwise it doesn't show the option. Any suggestions?

Two options:
Change the portlet logic so it accepts multiple feeds and presents them all in one portletRegister multiple instances of the portlet against the single web service - they should all have separate prefsDepends on how you want to present the content. One gets you a single portlet with content in one place - the other gets you the ability to have multiple portlets distributed on the page. Personally, I find the latter maddening, but it depends on the audience and your threshhold for pain.
Thanks,
Eric

Similar Messages

  • I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup

    I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup from last Friday, I go to my Lightroom Backups folder - and the most recent one showing not only isn't yesterday, it's OCTOBER 28 !?? Where the hell are the daily backups between October 28 and November 14?

    Oh wow - JET LAG strikes agin - my apologies; I have located the missing weeks of back-ups. After getting home from a 30-day trip to Europe, I had changed the location of my LR catalog back-ups to an external drive, and forgot that I did that. I have found them, and all is good. Never operate Heavy Machinery without enough rest. Cheers

  • Having same portlet on a page more than once

    I am faced with the task of allowing a user to add the same portlet to a page multiple times. The concept is identical to this: we have five news feeds and one 'News' portlet. We want a user to be able to add the 'News' portlet to a custom page as many times as they want. Then, within the preferences, they choose which of the feeds to display in each portlet window.
    Is this possible? It doesn't have to be a matter of choosing a preference-- the requirement is just that the user can choose wich feed to display and we do not have to create a whole new web scv and portlet for each feed that we add.
    Any help is greatly appreciated. We are using Plumtree 5.0.2 and have the EDK/GDK available in case there is a solution by writing Java code.
    Thanks,
    Mike

    Two options:
    Change the portlet logic so it accepts multiple feeds and presents them all in one portletRegister multiple instances of the portlet against the single web service - they should all have separate prefsDepends on how you want to present the content. One gets you a single portlet with content in one place - the other gets you the ability to have multiple portlets distributed on the page. Personally, I find the latter maddening, but it depends on the audience and your threshhold for pain.
    Thanks,
    Eric

  • How to use same page fragment more than once in a page,

    Hi Gurus,
    How to use same page fragment more than once in a page. I have a complex page fragment which has lots of Bindings (Binding Property set with backingBean variables).
    I want to use the same page fragment multiple times on the same page with different tabs.
    I want different ApplicationModule Instance for the page fragment in different tabs.
    So I have created a Bounded Taskflow with pagefragments which has this complex pagefragment.
    I've dragged the taskflow to page and created regions.
    I'm able to execute the page successfully when I have only one region but fails if I have region more than once in the page.
    Can anyone help me how to resolve this issue.
    Web User Interface Developer's Guide for Oracle Application Development Framework: section 19-2 states we can have same pagefragment more than once in a page.
    Thanks,
    Satya

    java.lang.IllegalStateException: Duplicate component id: 'pt1:r1:0:t2:si5', first used in tag: 'com.sun.faces.taglib.jsf_core.SelectItemsTag'
    +id: j_id_id1
    type: javax.faces.component.UIViewRoot@1d23189
      +id: d1
       type: RichDocument[UIXFacesBeanImpl, id=d1]
        +id: j_id_id5
         type: HtmlScript[UIXFacesBeanImpl, id=j_id_id5]
          +id: j_id0
           type: javax.faces.component.html.HtmlOutputText@bc252
        +id: m1
         type: RichMessages[UINodeFacesBean, id=m1]
        +id: f1
         type: RichForm[UIXFacesBeanImpl, id=f1]
          +id: pt1
           type: RichPageTemplate[oracle.adf.view.rich.component.fragment.UIXInclude$ContextualFacesBeanWrapper@2a0cc, id=pt1]
            +id: ps1
             type: RichPanelSplitter[UIXFacesBeanImpl, id=ps1]
              +id: pt3
         at javax.faces.webapp.UIComponentClassicTagBase.doStartTag(UIComponentClassicTagBase.java:1199)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag265(__projectrevenuern_jsff.java:12356)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag264(__projectrevenuern_jsff.java:12317)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag263(__projectrevenuern_jsff.java:12262)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag262(__projectrevenuern_jsff.java:12200)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag261(__projectrevenuern_jsff.java:12147)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag260(__projectrevenuern_jsff.java:12099)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag259(__projectrevenuern_jsff.java:12047)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag258(__projectrevenuern_jsff.java:11992)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag257(__projectrevenuern_jsff.java:11948)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag255(__projectrevenuern_jsff.java:11860)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag254(__projectrevenuern_jsff.java:11808)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag9(__projectrevenuern_jsff.java:510)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag8(__projectrevenuern_jsff.java:461)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag1(__projectrevenuern_jsff.java:149)
         at jsp_servlet.__projectrevenuern_jsff._jspService(__projectrevenuern_jsff.java:67)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:499)
         at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:429)
         at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:163)
         at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:184)
         at oracle.adfinternal.view.faces.taglib.region.IncludeTag.__include(IncludeTag.java:443)
         at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:153)
         at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:128)
         at oracle.adf.view.rich.component.fragment.UIXRegion.processRegion(UIXRegion.java:492)
         at oracle.adfinternal.view.faces.taglib.region.RegionTag.doStartTag(RegionTag.java:127)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag50(__projectrevenuepg_jspx.java:2392)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag49(__projectrevenuepg_jspx.java:2353)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag46(__projectrevenuepg_jspx.java:2209)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag45(__projectrevenuepg_jspx.java:2162)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag9(__projectrevenuepg_jspx.java:526)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag8(__projectrevenuepg_jspx.java:475)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag7(__projectrevenuepg_jspx.java:424)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag6(__projectrevenuepg_jspx.java:373)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag2(__projectrevenuepg_jspx.java:202)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag1(__projectrevenuepg_jspx.java:144)
         at jsp_servlet.__projectrevenuepg_jspx._jspService(__projectrevenuepg_jspx.java:71)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:408)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:318)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:499)
         at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:248)
         at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:410)
         at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
         at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
         at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
         at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
         at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$OverrideDispatch.dispatch(FacesContextFactoryImpl.java:267)
         at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:473)
         at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:141)
         at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
         at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:710)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:205)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
         at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101020 MACHINE = CAMIND1 TXID =  CONTEXTID =  TIMESTAMP = 1262712477691 
    WatchAlarmType: AutomaticReset
    WatchAlarmResetPeriod: 30000
    >
    <JMXWatchNotificationListener><handleNotification> failure creating incident from WLDF notification
    oracle.dfw.incident.IncidentCreationException: DFW-40116: failure creating incident
    Cause: DFW-40112: There was an error executing adrci commands; the following errors have been found "DIA-48415: Syntax error found in string [create home base=C:\\Documents and Settings\\tammineedis\\Application] at column [69]
    DIA-48447: The input path [C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr] does not contain any ADR homes
    DIA-48447: The input path [diag\ofm\defaultdomain\defaultserver] does not contain any ADR homes
    DIA-48494: ADR home is not set, the corresponding operation cannot be done
    Action: Ensure that command line tool "adrci" can be executed from the command line.
         at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createADRIncident(DiagnosticsDataExtractorImpl.java:708)
         at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createIncident(DiagnosticsDataExtractorImpl.java:246)
         at oracle.dfw.spi.weblogic.JMXWatchNotificationListener.handleNotification(JMXWatchNotificationListener.java:195)
         at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor$ListenerWrapper.handleNotification(DefaultMBeanServerInterceptor.java:1732)
         at javax.management.NotificationBroadcasterSupport.handleNotification(NotificationBroadcasterSupport.java:257)
         at javax.management.NotificationBroadcasterSupport$SendNotifJob.run(NotificationBroadcasterSupport.java:322)
         at javax.management.NotificationBroadcasterSupport$1.execute(NotificationBroadcasterSupport.java:307)
         at javax.management.NotificationBroadcasterSupport.sendNotification(NotificationBroadcasterSupport.java:229)
         at weblogic.management.jmx.modelmbean.WLSModelMBean.sendNotification(WLSModelMBean.java:824)
         at weblogic.diagnostics.watch.JMXNotificationProducer.postJMXNotification(JMXNotificationProducer.java:79)
         at weblogic.diagnostics.watch.JMXNotificationProducer.sendNotification(JMXNotificationProducer.java:104)
         at com.bea.diagnostics.notifications.JMXNotificationService.send(JMXNotificationService.java:122)
         at weblogic.diagnostics.watch.JMXNotificationListener.processWatchNotification(JMXNotificationListener.java:103)
         at weblogic.diagnostics.watch.Watch.performNotifications(Watch.java:621)
         at weblogic.diagnostics.watch.Watch.evaluateLogRuleWatch(Watch.java:546)
         at weblogic.diagnostics.watch.WatchManager.evaluateLogEventRulesAsync(WatchManager.java:765)
         at weblogic.diagnostics.watch.WatchManager.run(WatchManager.java:525)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: oracle.dfw.common.DiagnosticsException: DFW-40112: failed to execute the adrci commands "create home base=C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr product_type=ofm product_id=defaultdomain instance_id=defaultserver
    set base C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr
    set homepath diag\ofm\defaultdomain\defaultserver
    create incident problem_key="BEA-101020 [HTTP]" error_facility="BEA" error_number=101020 error_message="null" create_time="2010-01-05 12:27:58.155 -05:00" ecid="0000INzXpbB7u1MLqMS4yY1BGrHn00000K"
    Cause: There was an error executing adrci commands; the following errors have been found "DIA-48415: Syntax error found in string [create home base=C:\\Documents and Settings\\tammineedis\\Application] at column [69]
    DIA-48447: The input path [C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr] does not contain any ADR homes
    DIA-48447: The input path [diag\ofm\defaultdomain\defaultserver] does not contain any ADR homes
    DIA-48494: ADR home is not set, the corresponding operation cannot be done
    Action: Ensure that command line tool "adrci" can be executed from the command line.
         at oracle.dfw.impl.incident.ADRHelper.invoke(ADRHelper.java:1052)
         at oracle.dfw.impl.incident.ADRHelper.createIncident(ADRHelper.java:786)
         at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createADRIncident(DiagnosticsDataExtractorImpl.java:688)
         ... 19 moreI get the above Error.
    I have checked the bindings and it has 2 instances of the taskflow.
    I have changed the backingbean scope to backingBean

  • HT3702 iv been billed more than once

    i have been billed more than once i did buy 60 donuts for the simpsons tapped out for 2.99 but iv been billed for 8.97 and i dont know who to contact to explain i only brought it once not 3 times as the invoice state can anyone help me on who to contact please

    You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • How to call the same query more than once with different selection criteria

    Hi,
    Please do anybody know how to solve this issue? I need to call one query with the fixed structure more than once with different selection criteria. For example. I have following data
    Sales organization XX
                         Income 2008  Income 2009
    Customer A       10                 20
    Customer B        30                  0
    Sales organization YY
                         Income 2008  Income 2009
    Customer A        20                5
    Customer B        50                10
    Now, I need this. At the selection screen of query, user fill variable  charakteristic "Sales organization" with interval  XX - YY, than I need to generate two separate results per sales organization, one for Sales Organization XX and the second for SO YYwhich will be displayed each on separate page, where result for SO YY will be dispayed under result for SO YY. Are there some options how to do it for example in Report Designer or WAD or with programming? In Report Designer is possible to use one query more than once, but I dont know how to force each query in RD to display result only for one Sales Organization, which will be defined in selection screen.
    Thank you very much
    J.

    Hello,
    thanks to all for cooperation. Finally we solved this issue with the following way..
    User fill appropriate SO on the selection screen, which is defined as range. This will resulte, that selected SO are listed in report below each othe (standard behavior). Required solution we achieved with the Report Designer, we set page break under each Result row of RD. This caused, that report is divided into required part per SO, which are stated each on separate page.
    J.

  • Using firefox 5 - when ever I try to use the same key more than once in a row, it does not work. Hitting the multiple times does nothing at all. How can this be corrected. HELP!!!

    everything that needs to be done on the keyboard is effected - letters, numbers, backspace, directionals, delete, home, end, page up, page down, '''all keys that are pressed more than once''' It does not matter what webpage I am on.
    PLEASE HELP
    this is very frustrating

    You may have switched on an accessibility feature called FilterKeys by keeping the Shift key pressed for too long.
    * http://www.microsoft.com/enable/products/windowsxp/default.aspx
    *http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/access_filterkeys_turnon.mspx?mfr=true

  • Use Topic in TOC more than once...

    We have just purchased RoboHelp 6 for our Help System
    generation as well as to begin developing online training courses.
    I have a WebHelp File that contains 5 books - one book per
    procedure. I have a topic that is applicable to two procedures.
    Without having to make a copy of the topic, is it possible to set
    up the TOC to use the topic in question more than once?
    The problem arises when I am setting up the Browse Sequence.
    I tried to set up the Browse Sequence using the Auto-create using
    TOC...option, but the sequence appears to be in alphabetically
    order. In fact, it is in no way, shape or form even close to the
    TOC (as indicated in the Help - Topics in each browse sequence will
    be in the same order as in the TOC)!!!
    So, I tried to manually create the browse sequence. I used a
    browse sequence to contain all topics, then I set up another browse
    sequence to contain the duplicate topic. When I use the navigation
    arrows to move through the toc, it will not advance to the second
    browse sequnce.
    Any ideas or suggestions would be greatly appreciated. Thanks
    in advance.
    Lisa

    Hi LNT1
    The trick to all this is to never directly link from the TOC
    to the desired topic. Let's assume the TOC should have a topic
    appearing in two different places. In order to make this work, you
    link from two different redirect pages.
    Now if you generate WebHelp, I see where there could be an
    issue, because the browse sequence can only link from one topic to
    another. In other words, a topic can only have a single link to and
    a single link from it. So in this case, the redirect trick would
    fail. However, another trick comes to mind that may work. Instead
    of a Redirect page, you could have two different pages that instead
    of redirecting, contained an Inline Frame (IFRAME) that simply
    displayed the contents of the desired page. Basically, the pages
    containing the IFRAME would link properly and provide the desired
    effect.
    For more on IFRAMEs, download my Tips and Tricks file and
    scan it for how to create IFRAMES.
    Cheers... Rick

  • Is there any way you can deautherized 5 computers more than once a year?

    Is there any way you can deautherized 5 computers more than once a year?

    Click "Support" at the top of this page, then click the link under "Contact Us"

  • How can I add the same song more than once?

    how can I add the same song to my ipod shuffle more than once?

    Thanks. I tested it, and found that I can create a bookmark in FolderA, and them manually copy it to FolderB, FolderC, and FolderD.
    Once that is done, I tried the old method of "Bookmarks" --> "Bookmark This Page" and added it to FolderE. When I did that, it deleted the copy in FolderD but left the other three alone!
    This is fine with me. I personally think this is a bug, because I don't think that Firefox should ever delete a bookmark without asking me (or at least, informing me). But now that I understand the algorithm, I can work around it. Thanks!

  • The same SMS messages are showing more than once

    Hi,
    On my SMS page, my message threads are showing up more than once ,
    How would I go about fixing this?

    Hello,
    Maybe helps you:
    *[http://kb.mozillazine.org/Repeatably_downloading_the_same_messages]

  • HT1933 what if I bought the same game more than once from i tunes by mistake how can i claim a refund?

    what if I bought the same game more than once, How can I claim a refund from I tunes store?

    You can try contacting iTunes Support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Error: An attribute cannot appear more than once in the same start tag

    Hi Everyone,
    when i run the page sometimes it works fine but sometimes it throws Compilation Error as below.
    "Error(502,1224): file:/C:/Jdeveloper/jdevhome/jdev/myhtml/OA_HTML/fwk/t/Session_2055663493/region1.uix<Line 502, Column 1224>: XML-20124: (Fatal Error) An attribute cannot appear more than once in the same start tag."
    And i delete the particular file from the path and run the page so this time it works fine.
    But later after sometime i get the same error but the session number will be changed, then again i need to delete it and run.
    What can be the permanent solution for this issue?
    Plz let me know any suggetions.
    Thanks.

    Seems like the mdl file is corrupted or was not generated correctly.
    Can you try to create the mdl file again and then try the import ?
    If it doesn't work then try contacting Oracle Support.

  • Have to click on firefox icon more than once to start the programme

    Sometimes I have to click on Firefox icon more than once to start the programme. Multi-clicking on the icon does not always start multiple windows ie the programme just isn't starting sometimes on 1st click.
    Firefox always opens when using a hyperlink in an email, document etc.
    Have tried creating a new quick launch & also re-installing.
    Happens on two PCs - 1x Vista & 1x XP
    All help is appreciated :)

    First let me disclose that I am not an expert nor even much less. However I used to have this slow as a turtle opening of FF until I got rid of my antivirus software which at the time was Avast. I switched to Microsoft Security Essentials and have had no problems since. FF loads in 3 to 4 seconds!

  • Am I able to download items that I have purchased from Itunes more than once?

    Am I able to download purchased items from ITunes more than once?

    Go to the iTunes Store, log into your account, and click the Purchases link under the Quick Links. From there you should be able to re-download some or all of your purchased content. Note that not all content has been licensed for re-downloading in all countries at this time. You can see what content you can download here:
    http://support.apple.com/kb/HT5085
    You can also re-download content using an iOS device.
    For full instructions, see:
    http://support.apple.com/kb/ht2519
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

Maybe you are looking for

  • What is the best design pattern for this problem?

    No code to go with the question. I am trying to settle on the best design pattern for the problem before I code. I want to use an Object Oriented approach. I have included a basic UML diagram of what I was thinking so far.  Stated simply, I have thre

  • Webpage in Edit Mode displays NO editable data!

    I used Dreamweaver MX to develop our company's Intranet. Our HR Director makes changes to the Job Postings page on her own using Contribute 2. Since the original creation of our Intranet, I've updated to Macromedia Studio 8. A couple weeks ago she wa

  • CoreAudio troubles...

    For some reason today when I launched LogicPro (7.1), every time I hit "record" on an audio track the lead-in starts playing, then dissolves into distortion, then stops, and an error comes up: Core Audio: Disk is too slow (Record) (-10004) I have res

  • Error while reverse engineering a Flat File

    Hi I am getting following error while trying to reverse engineer a Flat file. Could you help in identifying what's the problem com.sunopsis.core.SecurityAccessException: oracle.odi.core.exception.OdiRuntimeException: OdiInstance is closed      at com

  • Unable to install downloaded programs

    I am unable to install any downloaded programs. dmg file expands to disk image but when I click to open, the icon bounces once in the dock and then disappears. I am using 10.4.6 on a 1.8GHz G5. I just got this machine to replace a G4- used but with a