Saving Changes in Photoshop Elements 9

I have trouble saving changes I make to photos in Elements 9.  When I try to Save or Save As, it says the photo is 'editing in progress,' even though I am finished with the changes.  How do I save the changes?

You have to also close it to free it back up in the organizer.

Similar Messages

  • Viewing an iphoto image  'saved as' using photoshop element

    How do i get iPhoto to display an image that was changed in Photoshop Elements and 'saved as' back into the original iPhoto library folder?
    The Finder displays the original and changed image files listed in the iPhoto Library folder. However, the iPhoto application will not display the image.

    Thanks for the response.
    Using Photoshop Elements, I changed the original image and saved it with a new name. Both the original and the changed image show a .jpg file exension in the iPhoto folder.
    The iPhoto application does not display the new image. It just seems not to exist unless you use Finder.

  • How can I change Adobe Photoshop Elements 10 into English version?

    It's strange for the second download shows Franch, how to change it to English version? Thanks.

    Thanks for response.  I purchase Photoshop Elements 10 from App store, the first install is ok-in English, but my computer reset for some problem, so I installed it again. But this time, it's not English version but the other that I cannot recognize. How can I do? I forgot to save the serial number, where can I check it?
    Thanks for help. 
    Jeff A Wright 於 2012/1/8 上午5:40 寫道：
    Re: How can I change Adobe Photoshop Elements 10 into English version?
    created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion 
    The language is tied to the serial number.  Did you purchase the software directly from Adobe?
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4124186#4124186
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4124186#4124186. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Preference are not saved when leaving Photoshop elements 10

    Hi,
    Each time I leave photoshop elements 10 (bought on Apple Store), A windows says that I don't have the required rights and my preference are not saved. Each time I restart the program it is re-installing the effect as if it's a new install.
    Any change done in preference window is not taken into consideration.
    I understood that this is because Photoshop is trying to save on root directory, which is not possible as protected.
    Anyone has a solution as it makes it almost unusable :-( How can I change the right or tell photoshop to save the preference file somewhere else?
    I use Mountain Lion.
    Thanks

    I do not need to install when I get from Apple Store. When I start for first time after downloading, photoshop starts first by creating content and effect window. After that the program works normally.
    Except when I want to quit, another window open telling me that I don't have the users rights to save my preference.
    If I restart again Photoshop it restart from scratch and tries to re-install content and effects, which should only done once.
    My problem is that I bought the version 10 in february this year and I was not aware that a new version was coming, so I don't want toinvest another 69 Euros....I would at least have my version 10 working properly.

  • FAQ: How has Elements membership changed in Photoshop Elements 11 and Premiere Elements 11?

    Q: How has Elements membership changed in Adobe Photoshop Elements 11 and Adobe Premiere Elements 11?
    A: Adobe Photoshop Elements 11 and Adobe Premiere Elements 11 do not offer Elements membership as an integrated, in-product service. This means that the following features are not available in Elements 11—nor will they be available in previous versions of Elements after the transition period CLICK HERE to see dates and details:
    Syncing of albums, photos, and videos between Adobe Elements Organizer software and the Photoshop.com online Organizer
    Automatic backup and storage of your photos and videos
    Ongoing delivery of new templates, artwork, and movie themes (for Elements Plus membership subscribers)
    Elements Inspiration Browser
    Elements 11 is, however, integrated with Revel, so you can share your photos to Revel for access on the web and across your mobile devices. You can also import your Revel photos to Elements 11 for editing and creating.
    Message was edited by: Pattie F

    Hi Kim,
    Please refer : http://forums.adobe.com/thread/1006208?tstart=0&promoid=KBHJQ to download your purchased copy of Photoshop and premiere elements 11.

  • Saving colors to Photoshop elements 5.0?

    Hi, I am a learning to digital scrapbook. I have the program
    Photoshop Elements 5.0 and was wondering if I can save the color
    swatches or schemes to my computer and be able to open them up in
    my program to sample and use these colors schemes I make. To make
    my digi pages?
    Thanks,
    Kimpy-Pie

    Hello, please see
    this
    previous post for the answer.
    The new
    kuler
    desktop will let you easily copy/paste Hex values from your
    Clipboard as well as search/browse themes. Download the
    AIR
    runtime file first.

  • Saving changes in premiere elements 10

    Hi my name is Bryant and here is my problem.
    I have my project done, then I create a DVD and watch it.  I find changes that I want to make, so I reopen my project and make the changes to the project.  I click Save. but when I create the new DVD. the changes that I made are not on the new DVD.  Specifically I made font size changes in my menus because the words were to big for the text boxes.  So I changed the sizes to a small size and I click the Done button, and I save the changes.  I then close out Premiere and then reopen my project again, but it was back to the original font size, Not the smaller font size changes that I just saved.  I don't know how to fix this problem?  Thanks to anyone who can help me.

    gk_ferrell
    Premiere Elements 9.0/9.0.1 was notorious due to many of its menu not retaining the background replacements in the finished DVD-VIDEO disc playback. The fix that we found was to add audio muted or non muted to the menu in the Disk Menus section of the program. It appears that these problems were gone in Premiere Elements 10, and I did report that at the time. From time to time, you find a menu whose buttons do not respond to the TV remote. But other than that, not much going on that is not typically explained away by overlapping objects, text maneuvers, spacing of menu markers, and related matters.
    Since the project preset direct the program as to what set of the menu .psd set (s, w, or hd) will be available to you in Disc Menus, let us start with:
    a. What are you setting as your Premiere Elements 10 Mac project preset? What is the size of this project as reflected in the burn to Quality Area for Space Required and Bitrate?
    b. In the upper right corner of the Movie Reel menu choice is there a "HD" label or none?
    c. Are you replacing background in both main and scene menus? How many scene markers, how many main menu markers, and how many stop markers and how placed?
    d. When you preview the menu, are you getting any messages about object overlapping?
    Let us start here and then decide what next.

  • Changing from Photoshop Elements 8 to CS6 brings problems.

    I have 'upgraded', as I thought, to CS6 from Elements 8. I assumed that when I installed CS6 that I would continue to have access to all the functions of Elements 8. This has been the case each time I upgraded from say Elements 6 to Elements 8.  I find that some of the information in Elements 8 is not accessible in CS6. Specifically 1. images in PS format are not readable in CS6. 2. Tagging of images has not been transferred into CS6. 3. Apparently I can only open Elements 8 so many times after I installed CS6. And I may have now exceeded my allowable number of times of opening.
    I am using Windows 8.1.
    I would appreciate assistance in negotiating my way out of these problems.

    I'm not familiar with Elements, but Photoshop CS6 is designed for professional use.
    And it is not an upgrade to Elements, they are two diffrerent programs, so don't expect to find the same features in CS6 and Elements.
    Hoewever, CS6 should be able to open PSD files from Elements, if that's the format you're referring to.
    In Photoshop, you have to use Bridge, which is a file browser, for tagging images.
    Apparently I can only open Elements 8 so many times after I installed CS6. And I may have now exceeded my allowable number of times of opening.
    I don't understand what you mean here. If you have a license for Elements, it should work as normal. Installing CS6 should make no difference.

  • I currently have Photoshop Elements 9 and want to change to Photoshop Elements 12

    I need to understand how ver. 9 converts to ver. 12, how does the organizer, specifically I want to understand file structure, folders & tagging

    Thank you, I has PSE9 on my old computer, I now have a new computer and
    still have my original disk.  Can I re-install PSE9 even though Adobe does
    not support that version?  From what I have seen of PSE12 I don't think
    that is the version for me, it is more than I need.  I simply want to scan
    my photos to directories and run short slide shows from that.  Is it
    possible that you could call me or I call you?  I find it difficult to read
    through manuals, I understand much better by asking some questions.  I will
    be out for a couple of hours but my phone number is 250 768-6620.  Gladys
    On Thu, Jul 10, 2014 at 7:53 AM, Barbara B. <[email protected]>

  • How can I download my purchased copy of Photoshop Elements 11?

    My laptop was completly new formatted and installed. I saved my downloaded photoshop element 11 version on a sd card. Now I try to reinstall photoshop element 11. But I get at the end the message: error occured elements cannot be installed! What do i have to do?

    Hi Michaelrethans,
    I checked your order & found that it was purchased in September 2013, I would request you to log in to www.adobe.com with your email as the ID, please go to "my orders", Under that you will fuind the
    recent purchase, click on it, it will provide you the download link & serial number. Do use that download link to install it as that is the correct download link.
    Hope it works.
    Regards,
    Rajshree

  • Can my photoshop elements 10 "tags" be recognized in Revel ?

    I have my photos organized by the dates that I assigned not when they were taken because they have gotten all messed up with transferring from one computer to a new one and also changing one photoshop elements to another.  So when I put my photos in Revel they are all scrambled and in NO ORDER.  I have grouped them in 3 year folders to help reduce the craziness   I have also tagged the photos in photoshop and it would be nice to be able to organize the pictures in Revel with the tags also if I wanted.  ie Europe trip. I have been transferring my photos from photoshop elements 10 to revel and I am wondering if my tags and dates that I assigned will transfer over If not now when.

    Hi,
    The D610 requires camera raw 8.3 which is not compatible with your PSE 10.
    You need to upgrade to PSE 12 (or later) or use the free Adobe DNG converter. The converter will take a flder containg your NEF files and converte them to DNG files. The DNG files can then be used by PSE 10.
    DNG  Converter 8.7
    Mac – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5858
    Win – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5864
    Useful Tutorial
    http://www.youtube.com/watch?v=0bqGovpuihw
    Brian

  • Photoshop Elements 8-Change of file format when saving deletes filename

    I have been using Photoshop Elements 8 since last May and have always been irritated that when I add text to a photo it always defaults to PSD format for saving.  I have gone to the preference options to see if I can set jpg as the default and it does not offer that option.  This means that every time I save after adding text I have to manually select jpg to get the format to change.
    Although this has been a pain, I have done it thousands of times as I have edited photos.
    My problem is that suddenly from one day to the next when I change from PSD option to jpg the filename disappears and I have to go back and manually type in the whole filename.  The only changes to my computer settings that I can think of that might have affected this is that Microsoft Updates had 2 updates.  First was Definition for Windows Defender-KB915597 and the other was Unpdate for Windows 7 for x64 based systems-KB97690.
    I saw a similar problem posted by sandwitch2 on Feb. 13th about PSE6.  99jon suggested the change to permissions of adding "everyone".  I tried this and it did not correct the problem.
    Any other suggestions are welcome.
    I have found Adobe's insistance on saving as PSD irritating to say the least in the past.  The inability to change this in preferences has made me very unhappy, but the quality of their product has outweighed the hoops they make me jump through until this.  Their search feature in support is pretty much worthless.  It either brings up nothing if you keyword is to limiting or brings up 200 responses if it if too broad.
    I have been a user of Photoshop Elements for over 6 years updating as new editions have come out. I am to the point that if I can't get this current problem fixed I am uninstalling Elements 8 and going to another software.  Adobe's proprietary requirements and poor support page are just too much of a pain to deal with.

    I was told that if I save in PSD if I send the photos to share with others only those with Photoshop Elements can open the files.  That is why I try to use jpg.  Is that true?
    Thanks for all the help from both of you,
    Bettye

  • Photoshop Elements 7 - format changes to temp file when saved

    When I open a file in the edit screen (quick edit) and then edit the file -- when I close it (and agree to replace the current image), it closes as a temp file and I lose the jpg file? It does state that the image "Could not save as ..... because the file is already in use or was left open." Then I close it and the jpg is gone. Is there some setting I have to change? I just want to make changes and then save as the same file so I only have the new, edited image? I know I have done this before.
    I am using Vista and Photoshop elements 7. I had elements 4 before and this never happened. In fact, I used my elements 7 before and it never happened.
    Thanks for any help.

    Please explain more as if your new file is not created properly or it is not recognized as a supported file format. In later case you will see some unsupported file format icon when you save the file and check its file icon.
    Also when you save the file, a jpeg settings dialog box comes up. Make sure you select appropriate settings.
    If you find that its just the unsupported file, then try opening the file with File->open As and choose jpeg and see if its opening.
    Also try open with after right click the image icon and browse and choose PSE as a default app for opening a file.
    -garry

  • Lightroom is not acknowledging changes made and saved in Photoshop Elements 11

    I purchased Photoshop Elements 11 and Lightroom 4 to use together.  I am a novice and new to photography and these softwares.  However, I used both together in trial versions and did not have this problem.
    When I start in Lightroom with an image, then take it to Photoshop to do some work with liquify,  save it, return to Lightroom... Lightroom is not acknowledging the new changes made in Photoshop.  When I ran the trial versions,  they did.   How do I get that feature to work again, is there a setting I'm missing?

    Actually  it started working and I'm not sure why or if I did anything different.  I did't do save as, no.  I kow I would have to go upload it again.    I ended up just shutting down both programs  entirely, fired them back up and it's working fine now.   I probably should have done that and/or rebooted my machine before writing in the question .   Thanks though!

  • When I external edit an aperture photo using Photoshop Elements 9 and then get out, the changes are not reflected in Aperture when I return - this used to work for me but doesn't seem to have for some time - help please?

    Have used Aperture for some time - at some point this stopped working - not sure when
    workflow:
    click photo and elect to use the external editor (Photoshop Elements 9)
    Copy of the photo is created in Aperture with the "O" badge and I am rolled out to Photoshop
    Have to change the type to 8-bit in Photoshop to start making changes
    When done and I exit I am prompted to save the photo
    On returning to Aperture however the "O" badged photo does not get updated/reflect my changes
    Other Things:
    I can find a changed photo sitting in the Aperture Library using finder or Photoshop itself - so I know changes have been made a new file saved (TIFF).
    I am wondering if I am missing some (new) preference such that the changes are not proerly being saved for re-display/storage in the Aperture Library
    I am running Lion OSX at the moment but the behaviour was the same under Snow Lepoard versions.
    Current version of Aperture is 3.1.3, Elements is 9.0
    Any help/suggestions greatfully received

    Try using psd.  Some rerports indicate some confustion between the apps with TIFF.  See:
    https://discussions.apple.com/message/15921933#15921933
    I cannot confirm, nor test, since I use PS CS5, and not Elements.
    Ernie

Maybe you are looking for