Saving data in the Interactive Planning Data

Hi,
I want to save data in the interactive Planning and for some key figures it says that the data is saved successfully but the data is not saved when I returne to the Interactive Planning.
What can it be?
I have looked for possible causes, but I have not identify it
Thanks in advance

Hi ,
Are the key figures that you are trying to save data for "auxillary key figures" . If so they will retain their value only till your are in the interactive planning screen , once you back out and come in again you will not be able to see the values that you put earlier. Check that and update me
Thanks
Saradha

Similar Messages

DP_How to lock KF in the interactive Planning table

Dear Expert!
I want to lock the data in the Interactive Planning table according to each Key figure and a period of time (that mean I can not change the data of KF after locked). How can I do?
e.g: I created a Planning book and data view with following Key Figure:
- Forecast
- GDP
- CPI
- Historical Data
And the time bucket profile of this planning book as following:
- Past: 24 months
- Future: 12months
Now, I want to lock data of the KF "Forecast" in all past and future; lock data of other KF (GDP, CPI, Historical data) in past period.
How can I do now!
I hope to know the question soon. Thanks for your support!
LeGiang

Hi LeGiang,
If you would like to not allow any manual input for ALL the key figures in the past, then the solution for this "history" part would be quite easy.
When you define the planning view, specify the "input from" date as the current date. This way, no-one would be able to change any data in the past manually.
The above would also take care of not allowing any manual changes to "Forecast" in the past.
If however, you want only certain KFs should be non-editable while others should be editable, then you should use the function CELL_INPUT:
Syntax would be like
<Macro Name>
   <Step Name> ( <Maintain 'processing Area' as 'past'>)
       Cell: <Key Figure Row name> ( Attributes ) =
          CELL_INPUT(0)
In above, remember that in <Step> row, you should double-click and change the value of the field 'change scope' to "attributes" from 'values'.
For the future and past, if you want that Forecast should be non-editable, then you could do this by another macro. Define a default macro that would change the attribute of the KF for Forecast as "no input allowed" for all the time periods. You could do this by using the function ROW_INPUT.
Your macro would look like -
<Macro Name>
    <Step Name> : ( 1 Iterations :INITIAL;INITIAL )
        Row: <Key Figure name e.g. Forecast> ( Attributes ) =
           ROW_INPUT( 0)
In the row line above, remember to double click and change the value of the field 'change scope' to "attributes" from 'values'.
If you need more help, do let me know. This second macro would actually make the whole row non-editable. You could create these macros as a default macro, and have them run in the end after the other default macros.
Thanks - Pawan

User Exit/Badi to change the billing plan date when create sale order

Experts,
Please advise which user exit/badi can be used to change the billing plan date wen create sale order.
My requriement is based on some rules to dynamically change the line item billing plan start date and end date when create sales order.
I tried some user eixt in MV45AFZZ, but the date got revert to the orginal date from billing plan.

Hi,
check the include MV45AFZB.
Thanks & Regards,
Sateesh.

How to get the user log from the entried planning data ???

Dear All,
Could you help me to give the suggestion regarding that please .. ?? :).
I have requirement to get the last user who in charge in modifying the planning data.
Or in the other words, i'm gonna get the log from the entried planning data.
e.g.
1. Phase 1 - My Friend:
Create the planning data :
Country           Sales
INA                 $1000
2. Phase 2 - I update it and create new record.
Country           Sales
INA                 $1500          < modified >
USA                $400           < new >
Could i get the log from those records ??
The log can be contain:
the created user       &   modified user ??
I just read the article regarding status and tracking system in BPS, but could i cover that requirement ??
(Because i got that the status and tracking system for creating a workflow for planning).
Or ..
Is there other way that can fulfill this requirement ???
Really need your guidance all.
Regards,
Niel.

Dear Mayank,
Tks a lot for your responses.
I've tried it but in BPS version..
I saw in the document there is GUID (unique ID), could you explain me what the objective is ???
I work out to plan to store the user created, date created, and planning level information in the log data.
What do you think ..
Is it better to display them in the BEx Report / another manual planning layout ???
What did you display the log data in your case ??
Still need your guidance ..
Really - really thanks.
Niel.

To track which line item the billing plan date changed.

Hi All.
I have a requirment of tracking changes done for the billing plan date and whenever i change the billing plan date it will be reflected in the FPLA table. But i was not able to track to which line item of the subscription/order the billing plan date changed.
In the FPLA table there is a relation to the VBELN(subscription/order) only not POSRN(line item) is there.How can i track to which line item it got changed.
Thanks for your help.
Thanks,
Neslin.

Hi,
There should be entries in FPLTC for FPLNR found in table FPLA. Try from SE16, enter FPLNR preceded by zeros so that the total length is 10 and execute.For example, FPLNR is 10, enter 0000000010.
Hope it helps.
Regards,
Nupur

To track the line item to which the billing plan date changed.

Hi All.
I have a requirment of tracking changes done for the billing plan date and whenever i change the billing plan date it will be reflected in the FPLA table. But i was not able to track to which line item of the subscription/order the billing plan date changed.
In the FPLA table there is a relation to the VBELN(subscription/order) only not POSRN(line item) is there.How can i track to which line item it got changed.
Thanks for your help.
Thanks,
Neslin.

Hi,
There should be entries in FPLTC for FPLNR found in table FPLA. Try from SE16, enter FPLNR preceded by zeros so that the total length is 10 and execute.For example, FPLNR is 10, enter 0000000010.
Hope it helps.
Regards,
Nupur

Can NOT cancel/Reverse GI with a date before the actual GI date

Hi
can NOT cancel/Reverse GI with a date before the actual GI date, if i do the PGI in wrong date, then how should i do?
thanks

>
jo jo wrote:
> Hi
>
> can NOT cancel/Reverse GI with a date before the actual GI date, if i do the PGI in wrong date, then how should i do?
> thanks
Hi Jo Jo,
I am not sure if i understand your problem correctly.
As far as my understanding goes you are trying to reverse a GI on a date before Actual goods issue date.
If you have PGId on a date before planned GI date the system will update that date into Actual GI date and not planned GI Date.
For example if you planned GI date was 1st April 2008 and you did PGI on 28th April 2008 Actual GI date will become 28th April 2008.
So if you try to reverse PGI before 28th April you wont be allowed to as you cannot reverse a goods issue that has not happened.
Hope it helps.
Post furthur if i had misunderstood your problem.
Regards
Abhishek

XEM - Unable to load the initial data or the variances(delta) data into sys

I am installing xEM 2.0 SP 10 (SAP xApp Emissions Management) in a windows environment with SQL 5000. I installed xEM on NW 2004, usage types AS Java and EP 6.
I am attempting to load the initial data or the variances (delta) data into the system. Instruction is on page 15 in the install guide.
I am supposed to enter the following in the command line:
java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=[JDBC Driver];[JDBCUrl];[User];[Password]
Example command for import into SQL Server:
java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddtek.jdbc.sqlserver.SQLServerDriver; jdbc:datadirect:sqlserver://vma03:1433;SAPC11DB;password
The customer I am with is running the xEM database on a different instance. This is where I run into a problem. I am not sure how to specify the instance in the script. This is what I have attempted so far:
C:\>cd temp\load
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43:SQL3:1534;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43:SQL3:1534 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unable to connect. Inva
lid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
        at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
        at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
        at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
        at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43:SQL3:1534 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unab
le to connect. Invalid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43;SQL3:1534;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43 as user SQL3:1534 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Error establishing socket. Connec
tion refused: connect): [DataDirect][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect
        at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
        at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
        at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
        at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43 as user SQL3:1534 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Error establi
shing socket. Connection refused: connect): [DataDirect][SQLServer JDBC Driver]Error establishing socket. Connection ref
used: connect
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43:1534;SQL3;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43:1534 as user SQL3 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver][SQLServer]Login failed for user
'SQL3'.): [DataDirect][SQLServer JDBC Driver][SQLServer]Login failed for user 'SQL3'.
        at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
        at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
        at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
        at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43:1534 as user SQL3 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver][SQLServer]Lo
gin failed for user 'SQL3'.): [DataDirect][SQLServer JDBC Driver][SQLServer]Login failed for user 'SQL3'.
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43:1534:SQL3;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43:1534:SQL3 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unable to connect. Inva
lid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
        at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
        at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
        at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
        at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43:1534:SQL3 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unab
le to connect. Invalid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
C:\Temp\load>
My last attempt was a command using colons and semicolons with the following results. The closest (there was a significant delay before the error or failure) appears to have been //PRODSQL43;SQL3:1534; (second attempt). The error listed from this attempt is   "Error establishing socket. Connection refused: connect".
I also checked the default database that user SAPPEMDB has in place and it is assign the correct database.
Please help.
Message was edited by: Owner
        Mike Smayrabunya

Hey,
It looks like one of the following:
1. The DB is down,
2. The user SAPPEMDB does not have the right authorization.
3. The password of the user SAPPEMDB is not password
4. The syntax is incorrect
in order to find what is the problem,
please:
1. Login in the the DB PRODSQL43:1534 with the user "SAPPEMDB" and the password "password",
this will eliminate the options 1 - DB down, 2 -SAPPEMDB does not have authorization and 3 - password of the user SAPPEMDB is not password.
2. If the login failed, than please run sql trace with security elements (in the client there is a tool called "SQL Profiler"
3. If the login is correct, than you check the syntax of the command:
"java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddtek.jdbc.sqlserver.SQLServerDriver; jdbc:datadirect:sqlserver://vma03:1433;SAPC11DB;password"
According to the error message "Error establishing socket. Connection refused"
it looks like The DB is down or syntax is incorrect.

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter. If that is the case then something is wrong with iPhoto or your perhaps your library.
How large a date change are you putting in? iPhoto currently has an issue with date changes beyond about 60 years at a time. If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
If that is not the case:
Remove the following to the trash and restart the computer and try again:
Home > Library > Caches > com.apple.iphoto
Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
Let me know the results.

Need to load the data through excel for plan data through IP?

Hi all,
The user needs to load the data through the excel and click on the save button so that the data is saved in the cube through integrated planning.
The objects used are
customer, material, plant, calendarmonth sales qty, gross billing!!
Can anyone pls let me know how to do this?
Thanks

Hi,
You can use the following How to guide to load data from file into transactional cube.
If using IP :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90cef248-29e0-2910-11bb-df8dece7e22c?quicklink=index&overridelayout=true
Can also Refer to Marc's Blog:
/people/marc.bernard/blog/2007/11/25/how-to-load-a-file-into-sap-netweaver-bi-integrated-planning-part-1
If you are using bPS you can get the details in Wiki also for the same.
You can then create the hyperlink in Excel ,which user can use to upload data which can then be saved to cube using save button.

How to extract the data from the chart. Data were not saved

Hi everyone. Beginners question, but could not find an answer to it
How can I get the numerical data from the chart. Chart is already on the screen and data vere not saved into file during VI run. All I have - just chart, but I need numbers
Thanks
Message Edited by olka on 07-18-2007 09:41 AM

You can still do it, the process just changes a bit...
Copy the control to a new VI as before, and change it into a control.
Create the diagram shown in the attached screen shot.
Run the new VI. You will get two arrays: one of x-axis values and one of y-axis values.
Mike...
Message Edited by mikeporter on 07-18-2007 12:21 PM
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Attachments:
extracting xy data.JPG ‏5 KB

Text field data in the Interactive adobe form to long text

Hi Expert,
I have a text field(allow multiple line) in the interactive adobe form which has been binded to table type(char132) field of the context element.
Now I want the save text field data as a long text using SAVE_TEXT.
When I enter some value in the text field and trigger SUBMIT event then it is going to dump.
I am unable to trace out what is wrong, since control is not reaching to INIT method of the view.
please help.
Regards,
Rajesh.

Hi,
what is in ST22 for this problem?
Regards Jiri

CJ40/BADI/ BT events in CJ40 for transfering the Cost Planning Data

Hi ,
I need urgent help as i am unable to find any User Exit, Badi or BT events for CJ40 as my reuirement is to transfer the Cost Plannign Data into some third party System at the time of creation of Planning, so kindly help me in findinf out the Solution ASAP
Thanks in Advance

Thanks for reply,
But it is also shoing same error...
Combination T3329SOP-REV-MEXP-TRV/1399999 edited using detailed planning
Message no. K8043
Diagnosis
The characteristic combination T3329SOP-REV-MEXP-TRV/1399999 for version 005 in fiscal year 2011 was processed through detailed planning.
The plan data can only be changed by choosing Edit -> Detailed planning -> Change/Display.
System response
The entry readiness was cancelled
Pl help me this regards, why syste, block this perticuler cost element 1399999 for the year 2011 only and for this wbs only.
Thanks in Advance..

Capturing the changed data in the interactive forms through HTML Viewer

Dear all,
I'm showing the Interactive Adobe form in the HTML Viewer and I want to capture it back after the user enters data in the form and save it to application server.
Can I get some help on this. Please attach supporting documents if any.
Regards
Aravind

sorry i've got no document describing this. under service.sap.com/adobe you'll find a lot of Adobe content.
But basically use the Adobe Designer from program files\adobe\design 7.0\formdesigner.exe
create new form based on the CAF tutorials in the Interactive Forms section, add a new data connection to a wsdl, bind input/output parameters to form fields and get a button executing the wsdl operation.
create your interactive form callable object based on that template, configure the form to start process and as impersonalized form. create the form from the GP administration screen, download it and test it.
...And Good Luck!!!

Data Source to upload plan data for CO_OM_CCA_: CC: Costs and Allocations

Hi Guru's,
We have Data source that which upload Actual data for CCA (0CO_OM_CCA_1 - Cost Centers:cost and allocations). Every time it is full upload before loading the data deletion of previous load request will be done.
One more information required that i have checked in the BW cube for plan data it is available in the info cube for one cost center and rest of the costcenter i don't have the data now the users are requesting to upload the plan data for rest of cost centers.
Now as per the business requirement the users are requesting to upload the plan data in to the same i am not sure whether it will pull the plan data with actuals in to BW cube. Is there any alternate with the same data source or else is there any specific data source for uploading Costs and Allocations plan data
Please suggest me how can i go a head with this requirement.
Thanks in Advance.
Ganni

You can use the same datasource to load plan/budget data to the cube for all the costcenters. And regarding the actuals, you can use 0CO_OM_CCA_9 datasource to load to actuals cube and create a multi on top of both plan and actuals cube for reporting purposes.

Saving data in the Interactive Planning Data

Similar Messages

Maybe you are looking for