Saving Data Options in SmartView 11 1 2 2 300

Hi
I understand the Data Options in the Smart View 11 1 2 2 are not global and need to set for each sheet.
my business users toggle between adhoc analysis and forms in the same worksheet.
The data options are creating more work as it changes between tabs.
For example assume that my user is in tab 1 using Planning web form and he disabled the suppress missing option and then he goes to tab2 and does the adhoc analysis where this options are disabled.
when he comes back to tab 1 the options which he selected are gone. He has to disable them again.
Is there anyway where I can save this data options on server level.
Thanks
Praveen.

How funny, Having the options global was a huge pain point from switching from the Add-in to Smart View. People hated the options being global. The Options are sheet level now meaning they are kept on the sheet so if you have suppress missing on one sheet and go to another you can turn that off and the suppress missing will stat on the first sheet.
If you want to create default formatting for any new sheet that is created, go into options and set the options to what you want new sheets to start as. Then instead of just hitting OK, drop down the little arrow next to the OK button and select save as default. Now any new sheet created will start with the options you selected.

Similar Messages

Report prints Saved Data not Refreshed Data

We were running VS 2005 and using the Basic CR 2005 Basic that comes with it. We upgraded to use CR 2008 and found MANY issues after we went live in production that were apparent in the development. This has caused a lot of stress with us as well as our users. Iu2019ll summarize everything we found, possible workarounds and the open issues including the Printing/Loading of Saved Data.
First, it was reported that printing changed. It turns out when PrintMode = u2018PDFu2019 (default setting) it now asks after you choose u2018EXPORTu2019 (use to be u2018OKu2019) that it asks to Open or Save the Adobe. When our customers were running 20 some reports at a time and we had hundreds of users, this became a nuisance for the heavy reporting users and a training issue in general for us. With research, I found that we can change the PrintMode to be u2018ActiveXu2019. This was much better when we were testing. However, in Production it became a nightmare. If the user is on a Domain that disallows itu2019s user from installing software or if the user has tight security settings, this became a nightmare.
The second thing reported was that it was exporting to the wrong format. It was exporting into RPT format. It turns out with CR2008, it automatically defaults to RPT and the new pop-up, doesnu2019t isnu2019t clear to the user they even have a choice (the pop-up is much prettier, but it doesnu2019t look like a dropdown anymore). In addition, they reported it was taking twice as long to export (we think it was related to export file type now). With CR2005 Basic, it would have no default selection and if the user didnu2019t pick one, it would remind them they need to pick one. After much research, I found there is no way to customize the operation of the export without writing my own export. My users 90% of the time want to export to PDF and Excel the rest of the time. Since we arenu2019t using a CR Server like product, they NEVER will do RPT. There is no way with CR2008 to limit this list or to default the File Format. So now, if they forget to select the type, they get the wrong file format instead of being reminded to select one. Since the new pop-upu2019s dropdown selection isnu2019t easily apparent, this was a BIG issue for us. Since I have close to 300 reports on 7 websites, this will be a lot of work for me to write my own code and change all the ASPX page to use my own control.
The third thing reported was that the default name on Exporting was changed. Export uses the ID property of the Crystal Report Viewer as the default name of a file on export. When it replaced the viewer on all our pages, it set the ID to CrystalReportViewer1 instead of preserving the original ID. We now have to go back and change them to what we wanted manually. BEAWRE of this! For our power users who wanted to export 40 reports they now have type the name in manually on all of them. What took minutes now takes over an hour for them to do, until we can fix all the pages.
Now it was reported that some reports are showing OLD data. It turns out there shows Saved Data from design time. In our site, we have a parameter page which getu2019s user selected parameters, save to a session and then load the report page using the session variables, and then redirect them to the report page which on page load we set the reports parameters. We use the CrystalReportSource using ODBC. The report has all the connection information. Well if the user happens to select the same parameters I used at design time, it wonu2019t pull the data from the database. They see our test data instead which is garbage. If they select different parameters, display the report and then go back and select the original parameters, they will get the correct data. This can be catastrophic for us! So I added at the beginning of the Page Load before setting parameters the following:
     If Not Page.IsPostBack Then
            CRSServiceAlertsReport.ReportDocument.Refresh()
     End If
This seemed to work. A pain to add on every report page though when it wasnu2019t necessary before. But then I just got called this morning and they say when they print, it prited the OLD data. It seems the refresh pulled new data and updated the display in the viewer but the ActiveX print still used the original Saved Data! I couldnu2019t find a solution for this. I found switching PrintMode back to u2018Pdfu2019 worked but now I have the extra click issue again, which I described above. I tried setting the reports u2018Discard Saved Datau2019 option but it still had the data!
In the end, had I known about all these issues I would have NEVER upgraded to CR2008. Iu2019m still looking for help on getting by the following:
u2022     Stop using Saved Data at runtime (either on Display or Print)
u2022     Getting the PrintMode=u2019Pdfu2019 to just pull up Adobe in Open mode without prompting the user.
u2022     Remove File Type options from Export
u2022     Set the default File Type options to nothing or something I want.
Another nice feature to have would be the ActiveX control for printing to be part of the .NET Framework so users donu2019t need to download it. Come on BO is a big company Iu2019m sure they can work with MS. 

What is that method to clear Saved Data; I looked and couldn't find it. I never had to call one in the prior version of CR 2005 Basic in .Net. With the .NET controls, it always refreshed the data before. This is a change in behavior for me.
As for the Print using Adobe, with CR2005 Basic, it didn't prompt the user to Open or Save before. This is new behavior. It used to just open the report in Adobe in memory before without this specific prompt (it did have the first prompt for All or specific pages, but it would just open after that). This is a change in behavior from prior versions and it has caused me several issues.
Many users don't like change and I didn't know to communicate this to them. They were taken by surprise. We'll learn to live it I guess, but I would ask you just to consider, why have an option to "Save" to PDF when you choose to print? I would think you would use Export if you want to save. It would never hurt to add an option to allow alternatives either.
As for including with .NET Framework, it was just an idea. I know how hard it can be working with third parties. However, given that CR Basic comes with it, I thought it may be possible to work with them. The better the integration the better the product is for the developers. I was thinking the button could call JavaScript/Java to print instead of an ActiveX, or some other method. Since I donu2019t know how the Control works, I couldnu2019t say. It just would be nice. I had a smiley face after that request, it didn't come out right when I saved the post.
I still don't understand why .Refresh will update the data in the viewer but printing using the ActiveX Control will still print the saved data instead of refreshed data. Since I never used this in the prior version I don't know what it would of done or not, but it just doesn't seem right it shows one set of data, and prints another.
In addition, why the designer still saves data with the report when you state not to, I think may be a problem still.
Edited by: Thomas Johnson on Nov 21, 2008 12:26 PM

Report generation is saving data to a word template

I created a template for a program to write test result data when prompted by the user. My problem is that after the template is written to and closed it's asks if the new data shoule be saved. I don't want to give the user that option because it actually saves it to the template not a document, and when another test is done and report is requested, it doesn't write over the data fromt the previous results, it adds to it. Is there some sort of Word security option or a vi that might be helper to prevent users from saving data permanently, to overwrite previous data?

Harene,
The ActiveX call to Quit comes with a parameter to Save Changes (T or F). I would suggest making that the last call you make. This is how the Dispose Report.vi is made in the Report Generation Toolkit for Microsoft Office. (This was checked on my machine with Office 2000.)
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

Import/Export Data Forms in SmartView 11.1.2

Hi,
Can we Import and Export Planning Data Forms using Smartview in 11.1.2? I know there is Offline Data Form, but is there an option of Exporting and Importing planning Data Forms using Smart View in 11.1.2?
Regards,
SG

No, I don't believe you can import/export forms using SmartView.
However LCM is available and is pretty painless:
http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_lifecycle_management/apgs04s05.html
Regards,
Cameron Lackpour

Lost game saves/saved data?

I'm not really sure whats happened but for some reason alot of my file game saves are missing. I've checked both the system storage and online storage and alot of content is missing. I've not been on my PS4 for a few weeks and was just looking to play some Saints Row which I had a game completion of 100% but the save file is no longer there. When I was checking the storage, literally all my saved data in gone minus a few recent-ish games I've played. Any advice? I previously shared a console with my partner but I bought my own console a few weeks back. I believe she has removed me from her console, would this by any chance have any effect on my files? I don't know the process for what happens when you delete a user but I presume you have the option to remove everything relating to the user from the console - including game saves/DLC/etc. I hope this makes sense, any advice would be appreciated!

When a user profile is deleted from a console, all content tied to said user profile is deleted as well. This only effects the console the profile was deleted from. If you didn't back-up your save files to a USB stick or PS+ storage and transfer them to your new console before the profile was deleted, then I'm afraid you'e lost those save files for good.

How to change default number format for saved data in signalexpress

I cannot find an option for determining format and precision of saved data. By default it is scientific with i think 3 siginificant numbers. How and where to do it?

Stjepan, it sounds like you're right where I was 2 months ago! Glad to see I'm not the only one struggling w/ SE.
Here's what I've had to do to control the precision of the data in my ascii file.
Insert an Amplitudes and Levels step from Analysis>Time Domain Measurements.
In the A&L settings, deselect Export RMA Value (keep Export DC Value selected).
Now drag that DC signal from the A&L step into your data view (literally drag and drop this signal onto the graph). From here you can configure the data view's properties to your likings, I.E, significant digits or digits of precision, floating point, etc.
I've found that Floating Point, 2 Significant Digits, and uncheck Hide Trailing Zeros to work well (visually speaking).
Insert your Save to ASCII step after the A&L step, and be sure to save your A&L's DC signal.
The data will export exactly as it's shown in the display.
TIP: you can rename your signals from any of the steps. This is handy because it's the renamed channel names that show up in your data headers (much more descriptive when you have multiple channels).
My apologies if this is all information you already know...
Message Edited by OKors on 09-10-2009 10:27 AM
SCXI- 1000 Chassis w/ 1346 adapter
PCI 6281 DAQ card
SCXI- 1520 Bridge Board w/ 1314 Terminal Block (x2)
SCXI- 1180 Feedthrough Panel w/ 1302 Block
Signal Express 2014.
Win7 Enterprise

Flush data TDMS, programmatically saving data and retrieval

Hi all,
The purpose of this LabView is to simulate a DAQ&writting-to-file scenario. The first loop creates the data, within this loop, if the user pushed the write to file toggle switch, the data will be queued and then sent to a TDMS file writing loop (second loop). Finally the last loop retrieves the saved data and displays it in the scroll bar Waveform graph.
If TDMS-OPEN VI option operation option is "open or create"; at first the program seems to work fine but if I want to run the program again, new values will be appended to the ‘first run’ values. The correct operation would be to rewrite or replace the old file and save it with new values (keep same file name). The most logical thing to do is to change the option of the TDMS OPEN to “create or replace” but this doesn’t work and the data or file is not even created. I do not understand why this is happening.
Thanks in advance for your help
호아킨
Solved!
Go to Solution.
Attachments:
Waveform with optional file writting.vi ‏30 KB

For the "False" case frame, it's fine to wire the case structure terminal to the while loop condition terminal, or just wire a "F" boolean constant to it, both way shuold work.
To stop the VI by clicking only one stop button, I think you should use a global STOP button for all the while loops. For example, you can wire this STOP button to the loop condition terminal of your DAQ while loop, and use two local variable copies of this STOP button in the other write and read while loop. Then all the loops are controlled by the common switch, once it is clicked, the VI will stop running.
By the way, you should configure this STOP button's properties as below dialog(Right click >> Properties), otherwise the VI might be broken because the local variable copy doesn't work.

Error while saving date value in Java dictionary

Hello Everybody,
I got following error while saving date value in one of the fields of the Java table.
Internal error occured in submit request: Error in method updateRequestContact : The object of type java.sql.Date with the value '2005-12-04 08:00:00.0' assigned to host variable 9 is not normalized. It must not contain time components in the time zone running the virtual machine.
I can't find why it is taking time value in the date object.
This value is coming from the RFC as a date value, and I am saving this value in Java dictionary table.
Same code for this was working fine earlier. But, now suddenly it gives error like this.
Even if I provide date on the screen from webdynpro application, this date value can't save in the Java dictionary and gives same error.
What should be the problem behind this?
Regards,
Bhavik

Hi Satyajit,
I am getting date value from the screen of the webdynpro application from date picker control and passing this value in Java dictionary.
More Information:
I have dat value in the Date object: target_date
But Now I have made new Date object as following:
Date target_Date1 = new Date(target_date.getYear(),target_date.getMonth(),target_date.getDate());
Then I am passing this object to Java dictionary. Still it gives same error.
Then I have changed code as following:
 int l_year;
 int l_month;
 int l_days;
 l_year = target_Date.getYear();
 l_month = target_Date.getMonth();
 l_days = target_Date.getDate();
 Date target_Date1 = new Date(l_year,l_month,l_days);
Now it works for me.
But I guess this is not the perment solution. It looks very strange. I have used so many date objects at various palces. So, this solution is not the final for me.
I want to findout the main cause of it.
One more thing: This code was working for a mornth or two. But, now suddenly it is giving this error.
Please help me if anybody knows.
Regards,
Bhavik

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013
Newform.aspx of list:-
Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?

Hello dcakumar,
Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
- Dennis | Netherlands | Blog |
Twitter

Saving Data from ALV.

hi all.
I have an issue regarding saving data from alv to data base table.
The problem is like this. I have an internal table consist of 10 column from three diferent tables.one primary key is there.
now i have displayed it in alv grid. there is a column of quantity. i made some changes in quantity of some rows. now i want to save it into the database table from which that quantity field fetched.
i used first check_changed_data method. if the flag is set it means data is changed.
wat shud i do to save that quantity column into data base.
Thanks In advance.
varu

Hi,
To modify database or ztable from the ALV grid,you need to do the following:
---You have to modify the field Catalog fields (fields that you want to make editable).Set the field EDIT as 'X'.For example if you want to make the field below editable:
ls_fcat-fieldname = 'CARRID'.
ls_fcat-edit = 'X'.
APPEND ls_fcat TO pt_fieldcat.
---Call the method below before you call the set_table_for_first_display.
CALL METHOD ALV_GRID_INSTANCE->set_ready_for_input
EXPORTING
i_ready_for_input = 0. ( For Display ) and ('1' for Edit )
After this put the set_table_for_first_display.
Now if the ALV data has changed,and you want to change the database or ztable,then in your pf status give a function code for SAVE button in the GUI.
In the PAI of the screen,in user command module write the following:
WHEN 'SAVE'.
call method gr_alvgrid->check_changed_data
importing e_valid = l_valid.
if l_valid = 'X'.
MODIFY spfli FROM TABLE itab_spfli.
endif.
(l_valid is a flag.
DATA:l_valid type c.
If you want to check if the user has entered any value on the grid, use the Method : CALL METHOD gr_alvgrid->check_changed_data.
This method returns a flag l_valid which can be checked to see if the data on the ALV grid has been changed or not.)
Regards,
Beejal
**Reward if this helps

Download to Data option for Hyperlinks on Reports

Hi,
There is a column called OrderNumber which will display its values in the form of hyperlink. On Master Report Page, it is taken from a fact called Orders.OrderNumber which when clicked leads to Details Report on a new window where the value need to be passed to another factOrderDetails.OrderNumber. This was only possible by using Dashboard Url in the column formula field of Order Number. The problem is with Download Data option which shows hyperlink formula instead of value in that column.So the original value is lost. This doesnt happen when it is downloaded to Excel or Downloaded to Excel 2000.
Is there any possibility that when using Download to Data, the hyperlinks shows it values rather than formula of the hyperlink.

Think about why Excel was created. In the old days, you could only pass data files in their simplest form and applications were need to parse the data. Text files, csv files, etc. were without format. Just data. Excel came along because people wanted all the formatting to go along with it, including being able to know what a hyperlink is. The files are larger because they include more information about the source file. Today, when passing Excel files are too large to do, one option that may still be available is to download in a csv file for the very reason that the file is smaller. It is smaller because you don't get any fancy stuff like nice formatting. But that is why your hyperlinks aren't coming across either.
If you want the hyperlinks, use Excel.

Need Help on Recovering Saved Data in a PDF File

Hi,
It took me several days to fill up an important immigration document in pdf format. During the time, I was able to save it and open it again with the data in the form fields.
The motherboard of the laptop was fried the other day. All the files on the harddrive are safe. I got a usb hd enclore and copy the files off the harddrive.
However, when I open the pdf file, the data fields are now all empty. What to do to recover the saved data fields? Is that possible?
Thank you very much!

Hi~
Don't be worry, I think to use some tools to recover your pdf file will be help.
I used a tool last month, and it recovered the pages as well as images in one pdf file of mine.
Follow this steps, it is very easy to repair: http://www.datanumen.com/apdfr/recovery.htm
You can have a try, good luck!
Julie

I got a new laptop and my iphone won't sync without losing all my saved data

I got a new laptop as my old one died. My iTunes account says that I can only sync with one authorised device, which is my dead laptop. I was able to back up all my music on to the new one but when I go to sync it says that I will lose my saved data. Does that mean my photos, contacts, text messages etc?
How can I sync to my new laptop without losing everything?

Your music/movies, etc will only be where you put them.
Copy everything fom your old computer or your backup copy of your old computer to your new one

Error (ORA-01403) saveing data form a report with apex_item items

Hi all,
I've a problem saveing data that's inserted into a report which I created using apex_item items. Reproducing the exact issue on apex.oracle.com will take me a lot of time, and I don't know if I really can reproduce this matter... So I hope I can explain my problem clearly enough, here...
The global story of the application is that its an application used for measureing objects. For these objects there are templates, with default properties. When measureing an object, the user must fill in those properties for the object. The report is build dynamicly, becouse each object has different properties and each property could be of an other kind (number, text, list, counter [=number field with add and substract buttons], and date). Depending on the type of the property, the report has to show an other item to fill.
The query for constructing this report is like this:
select defprop.proptyp_id,
apex_item.hidden(41,defprop.id) defprop_id,
defprop.nam,
decode(proptyp.id,
 1, apex_item.text(p_idx=>42,p_value=>''||
 decode(defprop.srt, 'CONSTANT', (select WRD
 from measurement_prop
 where defprop_ID = defprop.id
 AND measurement_id IN
 (SELECT ID
 FROM measurement
 WHERE OBJ_ID = obj.id
 AND DAT IN
 (SELECT latest_date
 from object_instance
 WHERE ID = obj.id)))
 ||'' ,p_attributes=>'class=case5_num'),
 2, apex_item.text(p_idx=>42,p_value=>''||
 decode(defprop.srt, 'CONSTANT', (select WRD
 from measurement_prop
 where defprop_ID = defprop.id
 AND measurement_id IN
 (SELECT ID
 FROM measurement
 WHERE OBJ_ID = obj.id
 AND DAT IN
 (SELECT latest_date
 from object_instance
 WHERE ID = obj.id)))
 ||''),
 3, apex_item.select_list_from_query(p_idx=>42,p_value=>''||
 decode(defprop.srt, 'CONSTANT', (select WRD
 from measurement_prop
 where defprop_ID = defprop.id
 AND measurement_id IN
 (SELECT ID
 FROM measurement
 WHERE OBJ_ID = obj.id
 AND DAT IN
 (SELECT latest_date
 from object_instance
 WHERE ID = obj.id)))
 ||'', p_query=> 'select wrd, id from property_typewrd where proptyp_id = ' || proptyp.id ||' order by vlgnum', p_show_null=> 'NO'),
 4, apex_item.text(p_idx=>42,p_value=>''||
 decode(defprop.srt, 'CONSTANT', (select WRD
 from measurement_prop
 where defprop_ID = defprop.id
 AND measurement_id IN
 (SELECT ID
 FROM measurement
 WHERE OBJ_ID = obj.id
 AND DAT IN
 (SELECT latest_date
 from object_instance
 WHERE ID = obj.id)))
 ||'',p_attributes=>'class=case5_num')
 || '<a name="add_f02" href="#"><img alt="add" src="#WORKSPACE_IMAGES#plusBig.gif"/></a> '
 || '<a name="sub_f02" href="#"><img alt="sub" src="#WORKSPACE_IMAGES#minusBig.gif"/></a>',
 5, apex_item.date_popup(p_idx=>42, p_value=>''||
 decode(defprop.srt, 'CONSTANT', (select WRD
 from measurement_prop
 where defprop_ID = defprop.id
 AND measurement_id IN
 (SELECT ID
 FROM measurement
 WHERE OBJ_ID = obj.id
 AND DAT IN
 (SELECT latest_date
 from object_instance
 WHERE ID = obj.id)))
 ||''),
 oms
 ) waarde
from default_property defprop,
object_instance obj,
property_type proptyp
where defprop.stdobjver_id = obj.stdobjver_id
and defprop.proptyp_id = proptyp.id
and obj.id = :P2200_ID_INVThis report works fine. Depending on the type of the property it shows a numberic field, text field, selectlist (with right values), counter field or date field.
If the default property is set to a 'CONSTANT' value, the last known value is filled in.
With a javascript I check the numberic field value and achieve the counterfield to add or substract values when 'plus' or 'minus' is clicked.
This javascript is placed in the field 'Execute when Page Loads' in the page properties in APEX. Here is the code:
/*Execute when page loads*/
/*Allow only numbers */
number_elem = $('input[name=f42].case5_num');
number_elem.keypress(function(event) {
if (event.which && (event.which < 46 || event.which > 57 || event.which == 47) && event.keyCode != 8) {
 event.preventDefault();
if (event.which == 46 && $(this).val().indexOf('.') != -1) {
 event.preventDefault();
//for mouse events, remove any non numeric characters
number_elem.bind('mouseup mousedown mouseleave', function(event) {
 this.value = this.value.replace(/[^0-9]/g, '');
/* Subtract Button */
$('a[name="sub_f42"]').click( function() {
number_elem = $(this).siblings('input[name=f42].case5_num');
currVal = number_elem.val();
if ( isNaN( currVal) ){
 elemVal = 0;
else {
 elemVal = Number(currVal);
if (elemVal > 0)
 number_elem.val(elemVal-1);
else
{ elemVal = 0; }
/* Add Button */
$('a[name="add_f02"]').click( function() {
number_elem = $(this).siblings('input[name=f42].case5_num');
currVal = number_elem.val();
if ( isNaN( currVal) ){
 elemVal = 0;
else {
 elemVal = Number(currVal);
number_elem.val(elemVal+1);
});Those two codes makes my report works fine. So far I'm happy. But now I want the data, which the user fills in the items, to be saved.
So I created a process that should do this for me (it wil run after the user hits a button), here is the code:
declare
 v_objmet_id number := 0;
begin
 select measurment_seq.nextval
 into v_objmet_id
 from dual;
 insert into measurment
 ( id
 , obj_id
 , dat
 values
 ( v_objmet_id
 , :P2200_ID_INV
 , :P2200_METDAT_INV
 /*Loop trough the values (g_f42 holds the value of the property)*/
 for i in 1 .. apex_application.g_f42.count loop
 /*g_f41 holds the key to the default property*/
 if apex_application.g_f41(i) is not null and
 apex_application.g_f41(i) > 0 then
 insert into measurment_prop
 ( measrument_id
 , defprop_id
 , wrd)
 values
 ( v_objmet_id
 , apex_application.g_f41(i)
 , apex_application.g_f42(i)
 end if;
 end loop;
end;After running this process, the application branches back to the page, clearing the cache and set some items I use for filtering an other report with their own values.
Both the process and the branche have a 'when button pressed' condition, where the same button is filled in. The branche fires on submit: after processing.
When I hit the button to save the data, I get an error: ORA-01403: no data found
In the debug info I can find there is encountered an unhandeled exception in the process, but I don't know what's going wrong...
I thought it could be something with the date field, I want to save, so I put it in a to_date() with the right format, but I still got the error...
I've also checked if the query which fetches the nextval of the sequence is correct, and it is, no typeing error in the sequence name, or something.
I'm using APEX 4.0.2
Edited by: Mir on 28-jun-2011 10:25
Changed some code of the javascript, it directed to the wrong item ID, now its correct

My problem is solved. The error occured when application item g_f41 was accessed, so my application couldn't find the data, the user putted in there. I now pasted this part of the sql, to the other apex_item field, so it became one field and now it works correctly:
select [...]
apex_item.hidden(41,defprop.id) ||
decode(proptyp.id,
 1, apex_item.text(p_idx=>42,p_value=>''||
 decode(defprop.srt, 'CONSTANT', (select WRD
 from measurement_prop
 where defprop_ID = defprop.id
 AND measurement_id IN
 (SELECT ID
 FROM measurement
 WHERE OBJ_ID = obj.id
 AND DAT IN
 (SELECT latest_date
 from object_instance
 WHERE ID = obj.id)))
[... etc ...]

Short dump while saving data after selecting '#' for variable in WI

Hello All,
We have a selection variable in our webinterface on company code.After selecting '#',i am entering data and while saving it goes to dump.
but client wants to have an error message displayed after saving data instead of runtime error (dump).so that user can select required company code.
Error analysis is:
A RAISE statement in the program "SAPLRSDRI" raised the exception
condition "ILLEGAL_INPUT".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Is there any way to get desired result?
Thanks

Hello Murali,
What you would need to do is to change the attributes of the variable.
1. In BPS0, you can make it as a mandatory entry.
2. In the web layout, you can create a variable for Company code and force the user to choose a value from a dropdown list.
The specific approach would depend on how the layout is being called and how it has been setup.
Hope this helps.
Sunil

Saving Data Options in SmartView 11 1 2 2 300

Similar Messages

Maybe you are looking for