Saving Database Login Data in Management Console

Good afternoon,
I apologize for what should be a really dumb question, but it seems that upgrading from CE 8.5 to XI has made something that was very easy, much less obvious.
I have a report that I want to schedule to run weekly. Where do I enter the database login information? Does it store it in the report? (Which seems unlikely) Is there some tab I'm not seeing due to permissions in the Management Console? In 8.5 there was a database tab where you entered the information. I'm looking for something similar.
Thanx in advance,
Justin Moore
Financial Analyst II
Trover Solutions

Log on to CMC and click on objects and click on the report. Now you can see different tabs related to that object like Property, History,Process,Schedule,Categories,Rights.
Now click on Process-->click on database
Here you can see the connection related to te selected report. If you want to change the connection you can change here and click on update button to update.
Regards,
Raghavendra

Similar Messages

Displaying load statistics in Data Services Management Console

Hi,
I am new to BO Data Services. Currently I am running on BO Data Services 3.2. I have developed a simple job which takes records from source (SRCTBL) and inserts those records into target (TGTTBL) on a SQL Server 2005 database. There is no additional processing. I have also set SRCTBL and TGTTBL both have the same column definitions. Additionally I have defined the first column MYID as a primary key. On the TGTTBL I have set the Bulk Loader Options to append mode and maximum rejects to 1.
The job runs as expected by skipping the bad record when there is a record with duplicate MYID key which violate primary key constraint on TGTTBL. My problem is the number of records which were not loaded/skipped are not displayed in the Job Monitor Log under Data Services Management Console
Dashboards > Operational > Job Execution History > Log Viewer
Is there any interface in Data Management Console which shows me the following statistics for a loading operation
- number of source records
- number of records loaded
- number of records skipped/discarded
Really appreciate any pointers that you may have.
Thanks.
Regards,
CS

I would not suggest doing anything on your production data. Make change in the job as given below. Add Map operation tranform just before where you are writing to the target table. Inside map operation transform select all to discard....make sure you have selected discard for every operation codes. In order to see what data your job is tring to write to target table. Create a template table and then join that table to tranform which is just before map operation...i...suppose you have query transform at the end and then you write to target table. Then add this query transform to map operation transform as well as to template table.
You can now get what data your job is going to write to target without writing anything to target.
Test this in dev first before trying in Production.
REMEMBER: PRODUCTION IS S SACRED SPACE AND WE DON"T WRITE UNNECESARY DATA OR DO ANY MANUPULATION IN PROD TABLES.
Thanks,

Data Services Management Console Error.

Hi Experts,
i have installed SAP Data Services 4.2 , at the time of installation "Data Services Management Console" are works fine , but now when i am tryiing to open it is giving error"web page is not available" , please guide me to troubleshoot the issue.
Regards
Ajit

HI Arun Kumar
Thanks for your reply.
I checked the service Property and path to which it is executing it was correct and i didn't find any file call .conf in the Conf folder
Can you please elaborate me where to check this, this is very much needed for my task.
Thanks in advance
Ajit

Data services management console deployment on weblogic

I have installed SAP installation platform services 4.1 sp2 without Tomcat server. I have deployed BI applications using Weblogic 11 and they are working fine.
I have installed SAP data services on top of it. Installation runs fine.
I am not able to find Data services management console link in the start menu.
I think its not coming in the menu as tomcat is not installed. But isn't there a way where I can deploy management console on weblogic 11.
Please help

HI Arun Kumar
Thanks for your reply.
I checked the service Property and path to which it is executing it was correct and i didn't find any file call .conf in the Conf folder
Can you please elaborate me where to check this, this is very much needed for my task.
Thanks in advance
Ajit

What format to input $currentdate(datetime) Global Variable in Data Services Management Console?

What is the correct input format for the datetime Global Variable in Data Services Management Console?
I've tried several formats and keep getting a syntax error.
The DSMC is Version: 14.0.3.451
I'm a new user and learning as I go.
Thanks for your help.

Hi,
if you get syntax error as below,
Syntax error at line <1>: <>: near <.04> found <a float> expecting <+, ||, DIVIDE, MOD, *, SUBVARIABLE, a decimal>.
1 error(s), 0 warning(s).
Check and fix the syntax and retry the operation.
Error parsing global variable values from the command line: <$sedate=2014.12.04 12:00:00;>.
Check the syntax and try again.
solution is simple
Place the global variable value in single quotes '2014.12.04 12:00:00'

Data Services Management Console

Hi All
I have 2 Data Services systems on 2 seperate servers, 1 x Dev 1 x Live. I have migrated the repositories from the Dev Box onto the Live Box. I have created new job servers for the migrated repositories and changed the DataStores connections to look at the live database. I then setup the repositoires in the Management console.
The strange thing is a few of the repositories still have a link back to the Dev job servers as well as the Live Job servers even though I have created new job servers on the Live Box for the migrated repositories and have change all connectors from Dev to Live. How do I get rid of the references to the Dev job servers on the Live box ?
Thanks

Hi
I guess that your repo migration was done by copying the databases/schemas. If so, this is not best practice as it will take environmental information with it.
To remove the "old" job servers, you can remove the entries from a repository table - al_machineinfo. However, I should warn you that editing the repo in production manually should be done by someone with VERY good Data Services knowledge.
Good luck!
Michael

Urgent: Not able to Login into Enterprise Manager Console 11g

Hi,
I am trying to login into Oracle Enterprise Manager 11g Fusion Middleware Control but its giving the error "Login failed. Error connecting to the Server".
The same is happening with Oracle Weblogic 11g Administration Console too.
Please help me to resolve this issue.
Thanks in Advance,
Manish Kumar Pujari

Is your user id and password correct.
Command console will give you more details on the error or you can go to user_projects/domains/soa_domain/server/logs to check the logs
Make sure database and listener is up and running.
For a quick solution you can stop managed server ,admin server ,database and listener and then start listener ,database,admin server and managed server in order specified

No databases listed in Enterprise Manager Console

I have loaded Oracle 10gR2 and am having trouble with the Enterprise Manager Console. When it came up the first time I saw all the databases in my tnsnames file and connected to a couple of them. The second time I opened it all the databases were gone. The only think in the left pane is Network expanded with nothing underneath it. The tnsnames file still exists with all the original databases and I can connect to them. This has happened on previous 10g installations. How can it get Enterprise Manager Console to see the databases in my TNSNAMES file?

what happens when you click on 'Navigator' on the menu and select 'add database'.
Can you add databases from your tnsnames?
If you can't its probably because you've manually edited your tnsnames.ora and although it still works for sqlplus, you'd have messed up the formatting that the console likes.

Can not login into Solaris Management Console

I have a stand alone Solaris 9 system, I am able to log in as root, when I try to run Solaris Management Console 2.1 to create/delete/modify users it prompts for the root password. I enter the root password and it doesn't take and prompts again to enter the root password. Current encryption is MD5, current password is 14 characters long, changed to 8 characters still same issue. Not sure exactly where to look or what I should be looking for, other information I have gathered if it helps:
/etc/user_attr
root::::profiles=All;auths=solaris.*,solaris.grant;type=normal

Seems your root password is not working.
Boot the system with CD to single user from PROM (ok).
From OK prom issue boot cdrom -s, the system will boot to single user mode.
Mount your root device, it will be something like /dev/dsk/c0t0d0s0, mount it to some mount point like /mnt or /a. (mount /dev/dsk/c0t0d0s0 /mnt)
cd /mnt/etc
vi shadow
remove the encrypted password for user root and save the file.
cd /
umount /mnt or /a where root partition is mounted.
reboot the system and re-set your root password using passwd command.

Data Service Management Console (Administrator) not coming up

Hi Experts,
Was wondering if someone can help me a little. I am having issues with the Management console not coming up. This is what the address is:
http://localhost:8080/DataServices
The only message I see is : "waiting for localhost"
I can see that the service Apache Tomcat for BI 4 is up and running.
It was running up until yesterday but today the log-in page just does not come up. Would appreciate any help possible to look into this.
I am also able to successfully click on Impact and lineage Analysis and navigate there. It is only the admin console that won't open.
Just a further information, I setup a couple of real time jobs and thereafter probably something has gone wrong. Is there a way to disable RealTime jobs from outside of the management console?
Thanks.
MD

Hi Manish,
Is the path correct?
Try http://localhost:8080/BOE/CMC

Failed to open the Connection: to Database on CMC(Central Management Console)

Post Author: [email protected]
CA Forum: Data Connectivity and SQL
I can create and run a report no problem on Crystal Reports XI. However when i upload it to the CMC i get Fail to open the connection. I use ODBC 3.51.17 for MySQL.I created Business Views from Dynamic Data Connections (could the problem be in here in the DC or DDC?)Reports are created in Crystal then uploaded to the CMCReports run FINE in Crystal, but once it is uploaded to the CMC i get a "Failed to open the connection. xxxx.rpt

Post Author: petiera
CA Forum: Data Connectivity and SQL
G'day,
I'm facing the same problem, so did configuring ODBC and DNS solve this?
If they did, I'd like to know how to do this in Linux. So far I've installed unixODBC and mysql ODBC connector, what else should be done? Is there some "list of things to do after installation" for Crystal Reports Server in Linux.
-petiera

Regarding rescheduling jobs in data services management console

Hi friends
There are some issues which are leading to job failure. Is it possible to take a chance of rerun the job once again, means can we rerun the job in production for brief investigation? If Active, what will be the consequences?
1) Will it be duplication of data?
2) Or there any possibilities of data losingu2026u2026
Please give suggestion and the consequences if we do ?
Thanks in advance

I would not suggest doing anything on your production data. Make change in the job as given below. Add Map operation tranform just before where you are writing to the target table. Inside map operation transform select all to discard....make sure you have selected discard for every operation codes. In order to see what data your job is tring to write to target table. Create a template table and then join that table to tranform which is just before map operation...i...suppose you have query transform at the end and then you write to target table. Then add this query transform to map operation transform as well as to template table.
You can now get what data your job is going to write to target without writing anything to target.
Test this in dev first before trying in Production.
REMEMBER: PRODUCTION IS S SACRED SPACE AND WE DON"T WRITE UNNECESARY DATA OR DO ANY MANUPULATION IN PROD TABLES.
Thanks,

Data protection Manager console

Hi
Whenever iam openting DPM console, it is getting restarted with below error.
Connection to the DPM service has been lost
Review the application event log for information about a possible service shutdown.
Verify that the following services are not disabled
DPM
DPM Replication Agent
SQLAgent$DPM
MSSQL$DPM
Virtual disk service
Volume shadow copy
ID 917
Restarting administrator console
Thanks!!

please check this Services if they are started.
and please use this Walkthrough:
https://support.microsoft.com/en-us/kb/3008149?wa=wsignin1.0
Seidl Michael | http://www.techguy.at | twitter.com/techguyat |
facebook.com/techguyat |
youtube.com/techguyat

Data is not getting displayed in Management Console.

Hi Experts,
I am using BPC 7.5(M) SP04, Web server as IIS 7.0 and database server as SQL Server 2008 in Multi Server environment, Web Server is on Application Server (Windows Server 2008) and database server is on different machine.
I have configured the ODBC logging as documented in the install guide section : Setting Up ODBC Logging in IIS 7.0 for the Default Web Site and records are there in BPClog table of Appserver database but when I try to see data in Management console it doesn't show any data eg: It doesn't show any data after clicking "Who's Online" link under WebServer section of management console.
Do I need to do some more settings for getting the records display in Management Console.
Please Advice.
Thanks & Regards,
Rohit

Hi Roberto,
I have gone through the OPS guide but still "Who is Online" link of management console is not showing any data, I tried giving date range in Start date/end date fields and clicked on "Reload" button but it gives error message:
LOGIN FAILED FOR USER 'NT AUTHORITY\ANONYMOUS LOGON'
Please Advice.
Thanks & Regards,
Rohit

Data Services 4.2 Central Repos not in Management Console

We have just installed Data Services 4.2 and we are having problems with linking to the Management Console. The Central Repo has been added to CMC and all setup is complete. When you go into the management Console the Central Repo node under the Administrator tabe is not avail. Also if you try to activate the central through the designer, it kicks you out of the designer entirley.
Thanks
Travis

Hello Friend,
You indicate to go to the Central Management Console (http://server/BOE/CMC), click the Data Services option.
Select the Configure a new Data Services Repository, complete all fields and click Test Connection. If everything is ok and return success message, click save.
The repository created will appear in your repositories list, then right click it and select the User Security option. Make sure that the Data Services Administrator Users group is present and with Full Control access. To ensure that your user has access, you can also add it through the Add Principals option. Select the desired user, pass to the other side and click the Add option and Assign Security and include Full Control permission and apply.
In version 4.2 the ability to create access groups within the Central Repository was added.
To create and manage such groups need access SAP Data Services Management Console:
http://server/DataServices/launch/launch.do
Once you have successfully logged on, click the Administrator button.
On the left side there are some options, espanda the Central Repositories option and if you have properly created the Central Repository it will appear in the list.
Click User and Groups note that by default comes a set created (digroup), select the User tab and click the option later add.
Then enter the information which user, group, status and description and apply the changes.
Made these procedures you can enable your central repository through the DS Designer and create new groups.
Hope this helps.
Hugs

Saving Database Login Data in Management Console

Similar Messages

Maybe you are looking for