Saving/ deleting bookmarks...not working ?

I have had an issue when I save or delete bookmarks... I do this and then either the same day or next, they reappear as if nothing has been done ?  Not sure if my Time Capsule or iPhone are causing this. How do I fix this ?  I am still using Snow Leopard... but have the sync off so I use iCloud now...  any ideas ?

I am still using Snow Leopard... but have the sync off so I use iCloud now...  any ideas ?
You can't be using iCloud if you are running Snow Leopard. iCloud requires Lion v10.7.2. When you said you have sync off, are you referring to your MobileMe account? If so, try turning Sync back on in System Preferences > Mobile Me.
Since you turned Sync off you may need to Reset Sync Data so your Bookmarks sync correctly again.
Instructions here >   MobileMe: How to reset sync data
BTW... if case you are not aware, MobileMe services will not be available after June 30, 2012  >   Information about the MobileMe transition

Similar Messages

  • Is it possible to check automati all bookmarks, and delete the not working bookmarks

    Is it possible to check automatic all bookmarks, and delete the not working bookmarks

    Try this extension:
    *CheckPlaces: https://addons.mozilla.org/firefox/addon/checkplaces/

  • Self-Paced Learning - Bookmark not working in Captivate 5

    I followed the directions of adding a Table of Contents to one of my captivate projects and selecting Self-Paced Learning in order to create a bookmark but this does not work.  I have saved it as Adobe Flash 9 and Adobe Flash 10 but I am not getting the message about starting where I left off when either refreshing the browser or exiting and going back in.  What am I missing?
    Thanks for your time,
    Brenda

    All slides in the presentation are marked as continue.  I have gone
    through the first 5 slides and when I refresh the browser or exit out of
    Internet Explorer and open the project again it just starts at the
    beginning.
    Brenda
    From:   Lilybiri <[email protected]>
    To:     Brenda Dersham <[email protected]>
    Date:   01/25/2011 08:33 AM
    Subject:        Self-Paced Learning - Bookmark not
    working in Captivate 5
    Hello Brenda,
    How did you check: after uploading to a LMS?
    You have to be aware of the fact that a slide will be marked as 'viewed'
    only when the playbar has played the whole slide till the end. If you do
    pause slides with a click box, button, TEB and attach the action 'Go to
    Next slide' or something similar instead of the default action 'Continue'
    this will not happen and the slide will not be marked as completed.
    Lilybiri

  • At the top of my Mozilla home page, it lists the current URL site I am on. How do I delete them and the others in the drop down box? Highlighting and hitting delete does not work

    At the top of my Mozilla home page, it lists the current URL site, such as http://www.safeco.com, I am on plus the others in the drop down box. How do I delete them. Highlighting and hitting delete does not work.
    I am using windows Vista 007 and Mozila 3.6.1.3

    Do those entries have a yellow star at the far right?
    If they have then they are bookmarks. You can remove them if you open that link and click the star to open the Edit This Bookmark dialog and click the Remove button in that dialog.
    * [[Clearing Location bar history]]
    * [[Cannot clear Location bar history]]

  • In iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work.  Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8

    in iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work. Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8.
    Tom at the Genius Bar told me that Option Delete would work. It does not.
    I had to upgrade to iTunes 11.1.(I26) because it is required with OS7 on my iPod Touch (5th Gen). I have tried shutting down iTunes, then shutting down the entire system. This is the first in many visits that the Genius Bar gave me a solution that did not work.
    This is a big awkward computer locked to my desk. I would rather not unlock it and then carry it through a shopping center to the Genius Bar if i can avoid oit.
    When I installed iTunes 11.1, I discovered that Ihad to resubscribe to virtually all of the podcasts that I had previously been subscribed to. That was a surprise.

    Hello Achates:
    I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
    http://docs.info.apple.com/article.html?artnum=107120
    In that way, you will have a fresh copy of OS X and your current settings will be preserved.
    Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
    Barry

  • Bookmarks not working in multi-document PDF application

    Why are bookmarks not working in multi-document PDF application when uploaded to the web? We created a multi-document PDF application. All bookmarks and links work on our systems. All work on the customer's system. They do not work when uploaded to the customers website. Their IT department says its an issue of relative vs. absolute addressing. We've created applications like this for years without running into this issue. Can't find anything about it in Acrobat Help. Can anyone help or lead me to help? Thx much, Sandy

    Have you tried opening the file in your browser to see if the bookmarks are working?  To open the file in your browser you need to do this:
    1) Launch your favorite browser;
    2) File >> Open >> Select your pdf file
    See this picture to see what I am talking about.  You might need to click on it to magnify it:
    Good luck.

  • Other database delete is not working on forall statement

    Dear all,
    My scenario is , i create a program, the program fetch the data from database x and i want to delete on the same x database but i am running this program at y database, so
    so i created a view
    create or replace view vw_ibs_pda_bills_x as
    SELECT *
            FROM ibs_pda_bills_x@testarch1my program
    Declare
          CURSOR c2 IS
          SELECT *
            FROM vw_ibs_pda_bills_x
           WHERE bill_month <= '31-dec-2008'; -- AND bpref_no = :cons;
           opr varchar2(10) := 'DELETE';
          TYPE tsch IS TABLE OF c2%ROWTYPE;
          vtsch      tsch;
          cnt        NUMBER := 0;
          stime      NUMBER;
          etime      NUMBER;
          DURATION   NUMBER;
          rcount     NUMBER;
          errorsd   PLS_INTEGER;
          ecode     NUMBER;
          val1   VARCHAR2 (100);
          val2   VARCHAR2 (100);
          val3   VARCHAR2 (100);
          val4   VARCHAR2 (100);
       BEGIN
          BEGIN
             stime := DBMS_UTILITY.get_time ();
             OPEN c2;
             LOOP
                FETCH c2
                BULK COLLECT INTO vtsch LIMIT 1000;
                IF vtsch.COUNT = 1000
                THEN
                   cnt := cnt + 1;
                END IF;
            If opr = 'INSERT' Then
                    FORALL i IN 1 .. vtsch.COUNT SAVE EXCEPTIONS
                          INSERT INTO dlul.ibs_pda_bills
                        VALUES vtsch (i);
            Else
                    FORALL i IN 1 .. vtsch.COUNT SAVE EXCEPTIONS
                        Delete from vw_ibs_pda_bills_x where bill_month = vtsch(i).bill_month;
            End if;
                EXIT WHEN c2%NOTFOUND;
             END LOOP;
             etime := DBMS_UTILITY.get_time ();
             DURATION := ((etime - stime) / 100) / 60;
             rcount :=
                 (cnt * 1000) + vtsch.COUNT - NVL (SQL%BULK_EXCEPTIONS.COUNT, 0);
         If opr = 'INSERT' Then
             INSERT INTO process_stage_log
                  VALUES (SYSDATE, 'IBS_PDA_BILLS', DURATION, rcount);
         Else
             INSERT INTO process_stage_log
                  VALUES (SYSDATE, 'IBS_PDA_BILLS-D', DURATION, rcount);
         End if;
             CLOSE c2;
             COMMIT;
          EXCEPTION
             WHEN OTHERS
             THEN
                errorsd := SQL%BULK_EXCEPTIONS.COUNT;
                IF errorsd > 0
                THEN
                   FOR j IN 1 .. errorsd
                   LOOP
                      ecode := SQL%BULK_EXCEPTIONS (j).ERROR_CODE;
                      val1 :=
                           vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).sch_code;
                      val2 :=
                           vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).bpref_no;
                      val3 :=
                         vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).bill_month;
                      val4 :=
                         vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).service_code;
                  If opr = 'INSERT' Then         
                      INSERT INTO process_error_log
                           VALUES (SYSDATE, ecode, 'IBS_PDA_BILLS', 'sch_code', val1,
                                   'bpref_no', val2, 'bill_month', val3, 'service_code', val4,'INSERT');
              Else
                      INSERT INTO process_error_log
                           VALUES (SYSDATE, ecode, 'IBS_PDA_BILLS', 'sch_code', val1,
                                   'bpref_no', val2, 'bill_month', val3, 'service_code', val4,'DELETE');
              End if;
                   END LOOP;
                END IF;
          END;
       END pda_insert;the program want to do the delet option for all delete is not working. The program executed successful but the operation delete is not happening
    how to solve this issue.
    please help me
    kanish

    No error encountered in my log table
    the new workaround you said, that is instead of for all , already i tried for i in 1.. to like
    instead of forall delete i tried the following way
    Declare
          CURSOR c2 IS
    SELECT *
            FROM ibs_pda_bills_x@testarch1
           WHERE bill_month <= '31-dec-2008'; -- AND bpref_no = :cons;
           opr varchar2(10) := 'DELETE';
          TYPE tsch IS TABLE OF c2%ROWTYPE;
          vtsch      tsch;
          cnt        NUMBER := 0;
          stime      NUMBER;
          etime      NUMBER;
          DURATION   NUMBER;
          rcount     NUMBER;
          errorsd   PLS_INTEGER;
          ecode     NUMBER;
          val1   VARCHAR2 (100);
          val2   VARCHAR2 (100);
          val3   VARCHAR2 (100);
          val4   VARCHAR2 (100);
       BEGIN
          BEGIN
             stime := DBMS_UTILITY.get_time ();
             OPEN c2;
             LOOP
                FETCH c2
                BULK COLLECT INTO vtsch LIMIT 1000;
                IF vtsch.COUNT = 1000
                THEN
                   cnt := cnt + 1;
                END IF;
            If opr = 'INSERT' Then
                    FORALL i IN 1 .. vtsch.COUNT SAVE EXCEPTIONS
                          INSERT INTO dlul.ibs_pda_bills
                        VALUES vtsch (i);
            Else
                   /* fORALL i IN 1 .. vtsch.COUNT SAVE EXCEPTIONS
                     Delete from vw_ibs_pda_bills_x where to_char(bill_month,'dd-mm-rrrr') = to_char(vtsch (i).bill_month,'dd-mm-rrrr');*/
                     for i in 1..vtsch.count loop
                       delete ibs_pda_bills_x@testarch1 where to_char(bill_month,'dd-mm-rrrr') = to_char(vtsch (i).bill_month,'dd-mm-rrrr');
                     end loop; 
            End if;
                EXIT WHEN c2%NOTFOUND;
             END LOOP;
             etime := DBMS_UTILITY.get_time ();
             DURATION := ((etime - stime) / 100) / 60;
             rcount :=
                 (cnt * 1000) + vtsch.COUNT - NVL (SQL%BULK_EXCEPTIONS.COUNT, 0);
         If opr = 'INSERT' Then
             INSERT INTO process_stage_log
                  VALUES (SYSDATE, 'IBS_PDA_BILLS', DURATION, rcount);
         Else
             INSERT INTO process_stage_log
                  VALUES (SYSDATE, 'IBS_PDA_BILLS-D', DURATION, rcount);
         End if;
             CLOSE c2;
             COMMIT;
          EXCEPTION
             WHEN OTHERS
             THEN
                errorsd := SQL%BULK_EXCEPTIONS.COUNT;
                IF errorsd > 0
                THEN
                   FOR j IN 1 .. errorsd
                   LOOP
                      ecode := SQL%BULK_EXCEPTIONS (j).ERROR_CODE;
                      val1 :=
                           vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).sch_code;
                      val2 :=
                           vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).bpref_no;
                      val3 :=
                         vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).bill_month;
                      val4 :=
                         vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).service_code;
                  If opr = 'INSERT' Then         
                      INSERT INTO process_error_log
                           VALUES (SYSDATE, ecode, 'IBS_PDA_BILLS', 'sch_code', val1,
                                   'bpref_no', val2, 'bill_month', val3, 'service_code', val4,'INSERT');
              Else
                      INSERT INTO process_error_log
                           VALUES (SYSDATE, ecode, 'IBS_PDA_BILLS', 'sch_code', val1,
                                   'bpref_no', val2, 'bill_month', val3, 'service_code', val4,'DELETE');
              End if;
                   END LOOP;
                END IF;
          END;
       END pda_insert;i am receiving the following error
    ORA-02055: distributed update operation failed; rollback required
    ORA-06531: Reference to uninitialized collection
    ORA-06512: at line 77
    ORA-06531: Reference to uninitialized collection
    kanish

  • Front page opens works shortly freezes. only yellow green buttons work. I click yellow to minimize normal top bar menu appears I choose new page, opens works normally. The restart saved tabs does not work on that first page.

    front page opens works shortly freezes.
    only yellow green buttons work. I click yellow to minimize normal top bar menu appears I choose new page, opens works normally.
    The restart saved tabs does not work on that first page.

    Hi @prdstudio3 ,
    Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
    Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
    If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
    Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
    Thank you
    George
    I work for HP

  • Multiple delete is not working.

    Hi,
    Multiple delete is not working. Please find my backend bean code. Please let me know the issue in my code.
    Table:
    <af:table value="#{bindings.CmProcessParamValueView13.collectionModel}"
    var="row"
    rows="#{bindings.CmProcessParamValueView13.rangeSize}"
    emptyText="#{bindings.CmProcessParamValueView13.viewable ? 'No data to display.' : 'Access Denied.'}"
    fetchSize="#{bindings.CmProcessParamValueView13.rangeSize}"
    rowBandingInterval="1"
    selectedRowKeys="#{bindings.CmProcessParamValueView13.collectionModel.selectedRow}"
    selectionListener="#{bindings.CmProcessParamValueView13.collectionModel.makeCurrent}"
    rowSelection="multiple"
    binding="#{backingBeanScope.backing_app_RunCalcPage.t1}"
    id="t1" width="720px" inlineStyle="height:140px;" partialTriggers="cb6 cb3"
    filterVisible="true" filterModel="#{bindings.CmProcessParamValueView13.queryDescriptor}" >
    <af:column sortProperty="ParamValue7"
    sortable="true" width="690"
    headerText="Comm Type"
    rowHeader="unstyled"
    id="c2" align="left" filterable="true">
    <af:outputText value="#{row.ParamValue7}"
    id="ot4"/>
    </af:column>
    </af:table>
    Backing Bean Delete Code:
    RowKeySet rowKeySet = (RowKeySet)this.t1.getSelectedRowKeys();
    CollectionModel cm = (CollectionModel)this.t1.getValue();
    System.out.println("RowKeySet is: "+ rowKeySet.getSize());
    for (Object facesTreeRowKey : rowKeySet) {
    cm.setRowKey(facesTreeRowKey);
    JUCtrlHierNodeBinding rowData =
    (JUCtrlHierNodeBinding)cm.getRowData();
    System.out.println("RowData is : "+rowData.getAttribute("ParamValue7"));
    rowData.getRow().remove();
    Thanks.

    Issue is resolved...
    Solution is,
    Remove selectionListener and selectedKey attributes from the table.
    Delete code is:
    DCBindingContainer dcBindings =
    (DCBindingContainer)getBindings();
    DCIteratorBinding dcIterator =
    dcBindings.findIteratorBinding("Iterator...");
    RowSetIterator rs = dcIterator.getRowSetIterator();
    RowKeySet rks = this.t1.getSelectedRowKeys();
    Iterator rksIter = rks.iterator();
    while (rksIter.hasNext()) {
    List l = (List) rksIter.next();
    Key key = (Key)l.get(0);
    Row row = rs.getRow(key);
    if(row != null)
    row.remove();
    }

  • HT1750 space.bar.and.delete.key.not.working.on.wireless.keyborad

    space.anddelte
    space.and.delete.keys.not.working.on.wireless.keyboard.help!

    Before replacing the keyboard do 2-3 SMC resets using the instructions in iMac SMC and PRAM reset

  • Saving sign in not working

    Saving "Sign in" not working in Firefox but okay using MS Explorer

    Do you mean names and passwords in the Password Manager or do you mean that you are no longer logged on to (remembered by) websites after closing and restarting Firefox?<br />
    There is a difference between remembering the name and password in the Password Manager and a "remember me" check box on a web page.<br />
    The latter usually involves the creation of a special "remember me" cookie that is stored on your computer and that is send to the server.<br />
    If that "remember me" cookie is removed or gets corrupted or is not send to the server then the server won't remember you and you need to sign in once again.<br />
    See:
    * http://kb.mozillazine.org/Cookies
    *http://kb.mozillazine.org/Password_Manager
    *http://kb.mozillazine.org/User_name_and_password_not_remembered
    *https://support.mozilla.org/kb/make-firefox-remember-usernames-and-passwords

  • I have a MacBook Air using Maverick. I have files in the trash I want to recover. I do not have "Put Back" and Command   Delete does not work.

    I have a MacBook Air using Maverick. I have files in the trash I want to recover to their original files. I do not have "Back Up" and "Command + Delete" does not work.

    Drag them out of the Trash and put them in their original location. Put Back may work on one file at a time.

  • Add new bookmark not working

    Running Firefox 3.6.13 on a Dell Inspiron laptop. Everything works great, except for one catch: I can't add new bookmarks. Pressing Control+D does nothing, clicking add new bookmark does nothing, dragging the tab into the dropdown bookmark menu does nothing. I've tried the entire tree of options on the Bookmarks not saved Troubleshooing page (https://support.mozilla.com/en-US/kb/Bookmarks%20not%20saved) which, among other things, involved resetting my localstore file, disabling all my extensions/themes/add-ons. I also disabled my Norton 360 firewall, which apparently can cause issues, but this didn't seem to solve it. And I have of course done the usual, deleted all cookies/browser cache etc and tried rebooting. Any idea what else I should try?
    MAJOR EDIT: Just realized it doesn't work in Safe Mode. What had happened was I tried to bookmark Google (not realizing I already had) and it let me do that, which is the same in normal firefox- pressing Control+D will bring up the expected box, but only on pages I'd previously bookmarked.

    Yes, as I said I tried that. I've disable every single one of my add-ons, themes and extensions but it still won't bookmark. EDIT: Does not work, even in Safe Mode. I agree that's weird behavior but the instructions there don't solve it.
    For troubleshooting reference though, here's all the extensions/themes I have installed-if any of them have known issues even when disabled:
    Adblock Plus
    Adblock Plus Pop-Up Addon
    Download Statusbar
    Flashblock
    Greasemonkey
    Norton IPS (I'm unable to unistall this due to Norton's crappiness but I leave it perpetually disabled, and as I said in the original post I've made the changes FF recommends for Norton's firewall/firefox settings)
    Xmarks
    Lavafox V1-Green
    Strata40
    As far as I know, all add-ons are up to date

  • Delete is not working properly

    I modified the Delete server behavior to delete associated
    records from the child tables and then delete the parent table as
    follows:
    if ((isset($_POST['peereduid'])) &&
    ($_POST['peereduid'] != "")) {
    $deleteTPRSQL = sprintf("DELETE FROM TEENPEERRELATIONSHIP
    WHERE PEEREDU_OWNS_ID=%s AND TEEN_ID=%s AND PEEREDU_TALKS_ID=%s AND
    CONTACT_DATE=str_to_date(%s, '%%Y-%%c-%%e')",
    GetSQLValueString($_POST['peereduid'], "int"),
    GetSQLValueString($_POST['teenid'], "int"),
    GetSQLValueString($_POST['peeredutalksid'], "int"),
    GetSQLValueString($_POST['contactdate'], "date"));
    mysql_select_db($database_cnPeer_Outreach,
    $cnPeer_Outreach);
    $Result1 = mysql_query($deleteTPRSQL, $cnPeer_Outreach) or
    die(mysql_error());
    $deleteCRBSQL = sprintf("DELETE FROM CONTACTREFERREDBY WHERE
    PEEREDU_OWNS_ID=%s AND TEEN_ID=%s AND PEEREDU_TALKS_ID=%s AND
    CONTACT_DATE=str_to_date(%s, '%%Y-%%c-%%e')",
    GetSQLValueString($_POST['peereduid'], "int"),
    GetSQLValueString($_POST['teenid'], "int"),
    GetSQLValueString($_POST['peeredutalksid'], "int"),
    GetSQLValueString($_POST['contactdate'], "date"));
    mysql_select_db($database_cnPeer_Outreach,
    $cnPeer_Outreach);
    $Result1 = mysql_query($deleteCRBSQL, $cnPeer_Outreach) or
    die(mysql_error());
    $deleteCTSQL = sprintf("DELETE FROM CONTACTTOPIC WHERE
    PEEREDU_OWNS_ID=%s
    AND TEEN_ID=%s AND PEEREDU_TALKS_ID=%s AND
    CONTACT_DATE=str_to_date(%s, '%%Y-%%c-%%e')",
    GetSQLValueString($_POST['peereduid'], "int"),
    GetSQLValueString($_POST['teenid'], "int"),
    GetSQLValueString($_POST['peeredutalksid'], "int"),
    GetSQLValueString($_POST['contactdate'], "date"));
    mysql_select_db($database_cnPeer_Outreach,
    $cnPeer_Outreach);
    $Result1 = mysql_query($deleteCTSQL, $cnPeer_Outreach) or
    die(mysql_error());
    $deleteCMSQL = sprintf("DELETE FROM CONTACTMATERIAL WHERE
    PEEREDU_OWNS_ID=%s AND TEEN_ID=%s AND PEEREDU_TALKS_ID=%s AND
    CONTACT_DATE=str_to_date(%s, '%%Y-%%c-%%e')",
    GetSQLValueString($_POST['peereduid'], "int"),
    GetSQLValueString($_POST['teenid'], "int"),
    GetSQLValueString($_POST['peeredutalksid'], "int"),
    GetSQLValueString($_POST['contactdate'], "date"));
    mysql_select_db($database_cnPeer_Outreach,
    $cnPeer_Outreach);
    $Result1 = mysql_query($deleteCMSQL, $cnPeer_Outreach) or
    die(mysql_error());
    $deleteCSSQL = sprintf("DELETE FROM CONTACTSERVICE WHERE
    PEEREDU_OWNS_ID=%s
    AND TEEN_ID=%s AND PEEREDU_TALKS_ID=%s AND
    CONTACT_DATE=str_to_date(%s, '%%Y-%%c-%%e')",
    GetSQLValueString($_POST['peereduid'], "int"),
    GetSQLValueString($_POST['teenid'], "int"),
    GetSQLValueString($_POST['peeredutalksid'], "int"),
    GetSQLValueString($_POST['contactdate'], "date"));
    mysql_select_db($database_cnPeer_Outreach,
    $cnPeer_Outreach);
    $Result1 = mysql_query($deleteCSSQL, $cnPeer_Outreach) or
    die(mysql_error());
    $deletePRTSQL = sprintf("DELETE FROM PEERRECOMMENDSTALK
    WHERE PEEREDU_OWNS_ID=%s AND TEEN_ID=%s AND PEEREDU_TALKS_ID=%s AND
    CONTACT_DATE=str_to_date(%s, '%%Y-%%c-%%e')",
    GetSQLValueString($_POST['peereduid'], "int"),
    GetSQLValueString($_POST['teenid'], "int"),
    GetSQLValueString($_POST['peeredutalksid'], "int"),
    GetSQLValueString($_POST['contactdate'], "date"));
    mysql_select_db($database_cnPeer_Outreach,
    $cnPeer_Outreach);
    $Result1 = mysql_query($deletePRTSQL, $cnPeer_Outreach) or
    die(mysql_error());
    $deleteTPASQL = sprintf("DELETE FROM TEENPROMISESACTION
    WHERE PEEREDU_OWNS_ID=%s AND TEEN_ID=%s AND PEEREDU_TALKS_ID=%s AND
    CONTACT_DATE=str_to_date(%s, '%%Y-%%c-%%e')",
    GetSQLValueString($_POST['peereduid'], "int"),
    GetSQLValueString($_POST['teenid'], "int"),
    GetSQLValueString($_POST['peeredutalksid'], "int"),
    GetSQLValueString($_POST['contactdate'], "date"));
    mysql_select_db($database_cnPeer_Outreach,
    $cnPeer_Outreach);
    $Result1 = mysql_query($deleteTPASQL, $cnPeer_Outreach) or
    die(mysql_error());
    $deleteTPTSQL = sprintf("DELETE FROM TEENPROMISESTALK WHERE
    PEEREDU_OWNS_ID=%s AND TEEN_ID=%s AND PEEREDU_TALKS_ID=%s AND
    CONTACT_DATE=str_to_date(%s, '%%Y-%%c-%%e')",
    GetSQLValueString($_POST['peereduid'], "int"),
    GetSQLValueString($_POST['teenid'], "int"),
    GetSQLValueString($_POST['peeredutalksid'], "int"),
    GetSQLValueString($_POST['contactdate'], "date"));
    mysql_select_db($database_cnPeer_Outreach,
    $cnPeer_Outreach);
    $Result1 = mysql_query($deleteTPTSQL, $cnPeer_Outreach) or
    die(mysql_error());
    $deleteTPMVSQL = sprintf("DELETE FROM
    TEENPROMISESMEDICALVISIT WHERE PEEREDU_OWNS_ID=%s AND TEEN_ID=%s
    AND PEEREDU_TALKS_ID=%s AND CONTACT_DATE=str_to_date(%s,
    '%%Y-%%c-%%e')",
    GetSQLValueString($_POST['peereduid'], "int"),
    GetSQLValueString($_POST['teenid'], "int"),
    GetSQLValueString($_POST['peeredutalksid'], "int"),
    GetSQLValueString($_POST['contactdate'], "date"));
    mysql_select_db($database_cnPeer_Outreach,
    $cnPeer_Outreach);
    $Result1 = mysql_query($deleteTPMVSQL, $cnPeer_Outreach) or
    die(mysql_error());
    $deleteSQL = sprintf("DELETE FROM CONTACT WHERE
    PEEREDU_OWNS_ID=%s
    AND TEEN_ID=%s AND PEEREDU_TALKS_ID=%s AND
    CONTACT_DATE=str_to_date(%s, '%%Y-%%c-%%e')",
    GetSQLValueString($_POST['peereduid'], "int"),
    GetSQLValueString($_POST['teenid'], "int"),
    GetSQLValueString($_POST['peeredutalksid'], "int"),
    GetSQLValueString($_POST['contactdate'], "date"));
    mysql_select_db($database_cnPeer_Outreach,
    $cnPeer_Outreach);
    $Result1 = mysql_query($deleteSQL, $cnPeer_Outreach) or
    die(mysql_error());
    $deleteGoTo = "peerselect.php";
    if (isset($_SERVER['QUERY_STRING'])) {
    $deleteGoTo .= (strpos($deleteGoTo, '?')) ? "&" : "?";
    $deleteGoTo .= $_SERVER['QUERY_STRING'];
    header(sprintf("Location: %s", $deleteGoTo));
    The problem is that the deleteGoTo is not working. After the
    delete, I am shown the original page again. Can anyone tell me what
    I need to do to get it working?

    Hi paramu
    I think you didn't get my question
    The new row is not saved into DB, user add a new record simply he change his mind half way and need
    to delete new record in form (As I understand this row only created in related iterator)
    So he expect after delete form goes back to previous state
    Thanks
    Mohsen

  • Delete button not working on the desktop

    Hello There,
    I am a new mac user. I don't know but for some reason, delete button on the desktop is not working, i.e. if I want to delete something I have to right click and then select "move to trash", is there are workaround for that, or it is like that only.
    Thanks in advance!!
    Regards
    Nikhil

    Hi There,
    First, welcome to Macintosh! To delete a file, use Command + Delete (The key with the apple logo on it is the command key.) Pressing delete alone will not move the file to the trash.
    Good luck!

Maybe you are looking for