Saving eps. format for older version of Quark 6

I can't remember how to save an photoshop eps. with a transparant backgound so can place into an older version of Quark. Every setting I use still gives me a white background.

reggie13904 wrote:
I can't remember how to save an photoshop eps. with a transparant backgound so can place into an older version of Quark. Every setting I use still gives me a white background.
You won't remember because it can't. Quark didn't acknowledge the existence of transparency until Q7. The clipping path method, as mentioned by other people here, is the only way round it. I know because I had to work with it for several years
Depending on exactly what your job is, there is a possible workaround.
eg. if you had an image on a transparent background in Photoshop, which you want to put over another background image, make the whole composite in Photoshop and then place that in Quark 6.
It reduces flexibility, but it works

Similar Messages

Compile for older versions

Hi,
I did some code and when trying to run the jar file in another computer i have the problem that the code was compiled in mine with version 1.6 and the other computer has java version 1.5.
Is it possible to compile a jar file for older versions?
Please help,
Rodo.

Here's an example of how flaky the -source and target flags are. This code compiles and runs fine under 1.5 (without flags):
import java.io.*;
public class VersionExample {
    public static void main(String[] args) throws IOException {
        PrintWriter out = new PrintWriter(new File("test.txt"));
        try {
            out.format("%s%n", "woops");
            out.flush();
        } finally {
            closeIt(out);
    static void closeIt (Closeable stream) {
        try {
            stream.close();
        } catch (IOException e) {
            e.printStackTrace();
}Now supply flags -source 1.4 and -target 1.4 and you get one error message:
path...\VersionExample.java:7: cannot find symbol
symbol : method format(java.lang.String,java.lang.String)
location: class java.io.PrintWriter
            out.format("%s%n", "woops");It seems to be noting that format() was introduced in 1.5, right? But what about interface Closeable and constructor PrintWriter(File)? They were introduced in 1.5, too! Yet if you comment out line 7 above, the rest of the code compiles :-(. Odd...
edit: I see what the compiler was choking on: format's use of varargs. If you rewrite the offending line as
out.format("%s%n", new String[]{"woops"});it compiles with flags -source 1.4 -target 1.4 :-(

I would like to go for older version of one of the app ( snipsnap ). previously i used to have in my iphone but during synching i did not got option to transfer apps to library so i lost all my apps. how can i get snipsnap v1.3 again?

i would like to go for older version of one of the app ( snipsnap ). previously i used to have in my iphone but during synching i did not got option to transfer apps to library so i lost all my apps. how can i get snipsnap v1.3 again? or if anyone have link to this older version app please let me know. thanks.

You appear to have an iPhone 5. Snipsnap 2.4.2, the current version, says it works on iPhone 5, iOS 5.0 or later. Why do you want an out of date version of the app?

Can I get product key for older versions of Illustrator with Creative Cloud Student and Teacher edition

I have purchased the Creative Cloud Student and Teacher edition and I now need to install illustrator on Windows Vista. All the new versions are not available for Vista. I have managed to find older versions for download but it is asking me for a product key. Is it possible to get the product keys for older version with Creative Cloud Student and Teacher edition?

You cannot purchase older versions of Adobe software thru Adobe. If you have a full subscription you can acquire the CS6 version thru that. I have had CS6 running on a Vista system for years without problems.
Download previous versions of Adobe Creative applications -
http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html

How to create Import format for building version Hirerarchy and Node

Hi
i Want to know how to create Import format for building version Hirerarchy and Nodes.Can anyone show me with example or format for version Hierarchy with few nodes for the hierarchy
i Want to Build   this   1. Version1 (Version)
                                 2.Account (Hirerarchy)
                                 3. Balancesheet (Limb)
                                 4. Assets (Limb)
                                 5. Cash (Leaf)
Thanks,

Please follow the DRM User Guide,
http://docs.oracle.com/cd/E17236_01/epm.1112/drm_user.pdf
Below is my preferred approach, by selecting only relation and Hierarchy sections,
The relation section contains the Node Name and Parent Name ( you can include any other properties, but as a best practice keep the Parent Node as the last column).
The Hierarchy ( Hier ) section contains the Hierarchy Name, Top Node and Hierarchy description
Follow the Import steps and provide a Name for the version.
++++++++++++++++++++++++++++++++
[relation]
AC_BalanceSheet AC_Account
AC_Asset AC_Account
AC_Cash AC_Account
[hier]
Account AC_Account AccountHier
++++++++++++++++++++++
Note: Please delete all the special characters (TAB) created at the end of [relation] and [hier] sections while you copy the content from an Excel sheet to a Notepad.

Looking for older version of Itunes to run on Pentium(R) 4 CPU 2.6GHZ Windows XP

looking for older version of iTunes to run on Pentium(R) 4 CPU 2.6GHZ Windows XP

? Please read my original post again. Maybe how I said it was confusing but that is exactly how I checked it... in VISTA. Exactly the way the link you gave me described.
You do understand the message I am getting says: *itunes.exe has been set to run in compatibility mode for older version of windows. For best results, turn off compatibility mode for itunes before you open it.* I am interpreting this to mean that compatibility is set for something OTHER then VISTA since it it saying "for and older version of Windows".
When you tell me to "Check the compatibility mode in Vista not iTunes" what the heck do you even mean? How do you check compatibility in iTunes?
Thanks for trying to help, but not sure you read my post as I intended. I have seen one other post that mentioned the same problem, but that post never got a response that was helpful.
Thanks for trying. Later !
p.s. I still need help from someone.

Does iOS 7 Support Apps for Older Versions of iOS?

Does iOS 7 support apps for older versions of iOS? This is my first big iOS upgrade so I wanted to be sure about this.

Which is why I said "should" rather than "will". As there are no absolutes, I'm pretty sure there will be an app somewhere that will not run or have issues until its updated to the new iOS.
With that said for the most part there "should" be no issues updating to a new iOS version related to having older unupdated apps, but its still possible that there can be.

How do I import bookmarks from a saved bookmark-file fron older version?

How do I import bookmarks from a saved bookmark-file from older version?

See:
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

Documentation for older versions

Hello there everyone, I have a question relating to
Coldfusion 4.0 and it would be helpful if I could scan the cfdocs
for it. I can see links for CF5 and CFMX at livedocs.macromedia.com
but cannot see anything for older versions.
Does anyone know any other sites that might have this sort of
info, is there an archive of old cfdocs anywhere?
Thank you for any help.
Barry

I don't think Adobe has them anywhere on their site, but you
can probably find them on someone's server, since they used to
install at /cfdocs/ try this:
http://www.google.com/search?q=inurl%3Acfdocs+%22coldfusion+4%22
inurl:cfdocs
"coldfusion 4"

Compatibilty Chart for older versions?

Hi just wondering if anyone knows where to locate compatibilty charts for older versions of WebCenter interaction. Primarily I'd like to know if Plumtree 6.0 SP1 is compatible with Windows Server 2003 SP2?
Thanks.
Edited by: user9526276 on 26-Jul-2009 17:45

Thanks for the response Ryan. I wonder if this is because it was never officially tested with SP2 since it came out way after that release. Does anyone have experience with this? I might try it on our UAT system and keep my fingers crossed.

I have a G5 and iBook with PowerPC/iTunes 10....just recently I can't bring up the preset Internet radio on either one. Is this a glitch, or have they been permanently disabled for older versions of iTunes?

I have a G5 and iBook with PowerPC/iTunes 10....just recently I can't bring up the preset Internet radio on either one. Is this a glitch, or have they been permanently disabled for older versions of iTunes?

I should have posted this for you a while ago. My apologies for not doing it sooner. This was passed on to me by another user R C-R
He deserves the credit for this workaround. This is his post from an area in the forum where you have to be level 6 or higher in which to participate.
I am getting the same (global) error using iTunes 10.3.1 on a 2008 MacBook running 10.6.8.
A really, really awkward workaround that works for me (for now) is if you have the URL of the Internet radio server you can go to Advanced > Open Stream... (in iTunes 10.x) or type command + U, enter it there & click OK. The station should play fine in 10.x.
You can get the URL from any version of iTunes that still supports the "radio tuning service" (which I gather is an Apple server thing Apple is no longer supporting for 10.x). Play the station normally from the newer version & type command + I to open the info window. At the bottom of the "Summary" tab you will see the URL. (Annoyingly, you can't copy the text so you will have to write it down.)
Once you have that, you can play the station in 10.x & add it to a playlist for future use.
To check this out, maybe try http://198.27.80.37/stream/mbarsott.pls -- it is a European Jazz station that works fine for me with iTunes 10.3.1.
This workaround does work, but is a bit cumbersome. I'm still holding out hope that it is just a glitch.

Export for older version of FCP and QT

I exported a Motion project to a QT file for a client in the DV format and they are unable to open it. I know they have an older version of FCP and QT so is there a way I can save it differently, maybe in Compressor?
I am using FCP 6.0.2 and QT 7.3.1.
Thanks...

Your first move would be to ask them what version of QT they have.
Then choose a matching compression profile in Compressor.
That said if the file you are sending them is a straightforward QT PAL/NTSC DV file from FCP there is no logical reason why they cannot open it.
How are you giving it to them on disk, via the web ?

Re-Freeze needed for older versions

I'm finding that different (older) versions of the same project saved in the same overall project folder sometimes, on loading, need to re-freeze ... when they were already frozen when originally saved.
Say I want to re-listen to the mix on version 10 of a project and I've worked through to version 18.
Version 18 has a freeze structure which may be different to the freeze structure of version 10.
But I thought I saved version 10 with all its appropriate freeze-files so why should it need to re-freeze? (Tine-consumin!)
Can anyone explain what's happenin here?

Well, I don't think it's a time-dependent thing. I just checked a Logic song file whose tracks I froze on 2009, September 30, when I bounced the tune and sent it out for mastering. I haven't opened the file since then, and the freeze files are still there in the "Freeze Files" folder inside the project folder. (The last time I worked on that file I was using Logic v7.2.3...not that it should matter.)
Anyhow, there's one data point. A song file that's over three years old, and the freeze files are still there, right where they're supposed to be.
Just to be sure I know how it works in Logic v9.1.7, I froze a track on a new song (version 03) that previously had no freeze files, and then I confirmed that Logic created the "Freeze Files" folder, and wrote the freeze file to that folder. After that, I unfroze the track, and sure enough, Logic deleted the freeze file. So if you're unfreezing the tracks, the freeze files vanish. But you probably knew that. I then refroze the track, and confirmed that the freeze file was there again.
I then saved the song as a separate project (version 04), but Logic did not create a freeze file folder for the new project. However, as soon as I attempted to play the new song file, then Logic created the "Freeze Files" folder and wrote the freeze file into that folder. So it appears that if you create a new version of the song as its own project, Logic wants you to play the song at least once to create new freeze files for that new project. It doesn't refer back to the freeze files of the previous version, or automatically include those freeze files as assets for the new project, even if you've checked the "Include assets" checkbox during the Save As... operation (which I did).
I went back and looked in the v.03 project folder, and the freeze file is still there. So I suspect that if you freeze your tracks, then save the song as a new version in its own project folder, and then play it to create new freeze files for that new version, Logic should keep the freeze files...er, unless you unfreeze the tracks, of course. The freeze files for the previous version should remain unmolested in their own project folder's "Freeze Files" folder. That's the way it works for me, at least.
If it's not working that way, you might have discovered a bug. Can you replicate the unwanted behavior?

Why doesn't the App Store prompt for older versions on first download?

I thought Apple user interfaces were supposed to be slick. Here's what I have to do to install an app. I've inherited a first generation iPad from a friend. The iPad was fully erased and set back to factory defaults before I got it. I have created my Apple ID and started customising the machine to suit me. The machine is running the very latest version of IOS it is capable of supporting 5.1.1. So I gaily visit the app store and start trying to install a few apps I like. Of course today 90% of the apps in the store are designed for IOS 6 or later and simply refuse to install at all. So here is the rather less than slick workaround I have to do.
First I have to put the iPad away and go to my Windows 8.1 Desktop computer running iTunes. I log in using my Apple ID, visit the App Store, pick the apps I want and download a few that I'd like to my computer. I then switch back to using the iPad. Now I see the apps I've downloaded to the computer attempting to install themselves on the iPad. If I've downloaded more than one app. This fails for all the apps. I have to wait for all the apps to fail, then delete them from the iPad and then visit the App Store on the iPad and navigate to Purchased Apps section. Now I can see my apps waiting and can attempt to install them one at a time. If I do this then, each app attempts to install singly, fails, and then I am gracefully asked if I'd like to download an older version of the app. If I do that the download and install works - hooray! I then repeat this process for the remaining apps. Next time I need to install any apps I have to repeat the whole process. It's not what I'd call slick.
Why on earth doesn't the App Store simply prompt for an older version of the app when I first want to install it?
Why do I have to do the rigmarole of switching to my PC, downloading there, and then switching back to the iPad again just to force the "Would you like to download an older version of the App" prompt to appear?
I'm not impressed so far.

No one here can speak for Apple since we are all just users like you. Perhaps the answer is as simple as this. This feature just rolled out recently. Perhaps Apple thought it was important enough to make it available before they had built out the whole solution.
Just a thought.

How do I create an installer for older versions of LV?

I have applications, for different customers, in different versions of LabVIEW. After installing the latest update to 8.2 it seems it is no longer possible to create an installer with an identical suite of additional installers. I think it should be possible to rebuild an installer with additional installers of your choice, i.e. older versions!
I would like to change only the LV-app and not the rest in order to avoid potential new problems. To be able to create an installer based on a LV-app in 8.0.1. I now need several CD:s from different LV releases. How could that be solved?

elinas wrote:
I would like to change only the LV-app and not the rest in order to avoid potential new problems. To be able to create an installer based on a LV-app in 8.0.1. I now need several CD:s from different LV releases. How could that be solved?
Hi Elinas,
I don't totally get what you want but I think I see your problem.
You want to create an installer with LV7.1 (or something), right?
Then when you build it and say add NI-DAQ drivers the installer asks for the LV 8.2 driver disk?
This is expected, because it is not looking at the LabVIEW version but at the NI-DAQ current version and it's origin (LV 8.2 driver disk).
There is no harm here as long as the up-to-date driver on your computer is backwards compatible (check this, the mentioned NI-DAQ and DAQmx removes older cards at every release!)
So it is not asking for the LV-disk but for the driver disk. If you want to install older drivers, you have to seperately download them from the NI-site and install them seperate (or remove the new one and install the old one, but I think you'll get errors)
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Saving eps. format for older version of Quark 6

Similar Messages

Maybe you are looking for