Saving file paths (like a bookmark gets saved?)

i seem to be doing a lot of restoring of data (for instance i had to restore my notes recently) and i am realizing that it would be uber helpful to be able to save file paths. right now i highlight the folder that i need, then i hightlight the one above it and then again the one above that until i get to the library level where i will see it easily.
is there some utility of function that would let me save all my important file paths instead of having to do this/
TIA

You would want to create aliases for your file paths. right click the folder choose create alias, then drag all the aliases into a new folder you titled Paths. drag the paths folder into your sidebar.
Another option is to keep your file paths in notes or whatever text editor you choose.
then copy and paste them into the "go" field
when in finder hit shift+cmd+G and the GO menu should pop up.
paste the file path from your notes into that field and you're there instantly.

Similar Messages

HT5824 I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have number

I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have numbers synced to iCloud.
I tried to undo it but the app crashed.
I am hoping there's like a previously saved version of my file in iCloud somewhere.

No, iOS does not do short term incremental back ups to iCloud such as you get with Time Capsule.It backs up when you do soo manually, or if set properly, when the device is plugged in and connected to WiFi. It will not have saved your changes as of 10 minutes prior.

Where does the details of the files on usr/sap directories get saved?

hi,
when a (.dat) file is created by background job processing in the 'usr/sap/' directories, where does the details like last changed, last modified of these files get saved?
which table does these detiails get saved?
thanks,
swamy

Hi,
Transaction AL11 does exactly wat you are looking for,
it lost list of files present on the server SORTED on date and time.
and also u can use function module EPS2_GET_DIRECTORY_LISTING which contains a date/time stamp
Hope it helps u...

After attaching zip file in cv01n its not getting saved

after attaching zip file in cv01n its not getting saved

Hi Jameel,
Please be clear, I understand that you are using Content Server right?
OK, then have you defined Content Repository?
Follow the Steps below:
1. Goto "OAC0" & Create your own Content Repository like say (Z_Jameel_CS)
give the proper description,
Document Area as "DMS Document Management System"
Storage Type - > 04HTTP Content Server
Protocol--> -
Version no --->0046/0047 ( whatever you are using)
HTTP Server -
> (Your content server ip address eg: 139.100.31.311)
PortNumber--->(ex 1088)
HTTP Script--> ContentServer/ContentServer.dll
2. Click on "CS Admin" Content Server Administration.
Ask your Basis guy to give you the User ID and Password for the Content Server
go to "Certificate" Tab,
you can see your Content Repository created Click on the "Mail" icon to get the Certificate.
then just check in the Settings & Statics tabs that all information has come or not.
3.
Then Define Content Category.TCode "OACT"
You need to create a New Category say Z_JAM
Document Area--> DMS
Content Repository---> (mention what you created earlier i.e. Z_Jameel_CS)
then click on the next icon what you see next this field.
everything from this Content Repostory will be Copied.
Then checkIn your documents in the Content category defined.
Regards
Rehman Khan
Reward Your Points First.

A column in a table has physical file path (I want to get file size of those docs from the OS)

Experts!!
I have a table that holds the physical file path of files in one of its columns. It does not give a link, just the physical file path.
For example,---- C:\bu\test.pdf and let us say the file size is kb according to the OS.
Is there any way I can obtain the file size of the files from the physical path?
for example, the file size of the test.pdf file in the example here using t-SQL?
Much Appreciation
ebro

Hey there... thanks for the response......I found the following as a solution for my problem. But my problem is the SP created using the method needs a directory as a parameter. How can I pass the directory from a table that holds my directory?
EXEC [dbo].[GetListOfFileWithSize](@Dir)
How do I pass the directory from my table?
http://stackoverflow.com/questions/7952406/get-each-file-size-inside-a-folder-using-sql/7958070#7958070
ebro

Sometimes data get saved to backend sometimes it doesnt get saved

Hi All,
kindly help me its urgent
I have table, i get the data from one RFC to be displayed in table, then i have 2 coloumns in which the user inputs some values. and finally i have to save it to backend, but the data is not getting save .
sometimes it get saved, sometimes it doesnt get saved

Hi Bhavya,
Have you called Bapi_Transaction_Commit to commit the changes ??
If not call "Bapi_Transaction_Commit" for commit.
wdContext.currentBapi_Transaction_Commit_InputElement().modelObject().execute();
wdContext.nodeTransactionCommitOutput().invalidate();
Regards,
Mithu

Double file extensions keep showing up when saving a file in Illustrator CS3???

I just installed the CS3 suite and when I am saving files in illustrator I keep getting double file extensions. For example if I save a file named "filename" as a .eps file it shows up in the save window with filename.eps.eps Also, if I click through the possible file types to save it keeps adding them one after the other so if I click. say pdf eps and ai the file in the "Save As:" window looks like this " filename.pdf.eps.ai.ai" Any ideas why this is happening? I keep having to mouse click in the "Save As:" box and delete the extra extension. This is really annoying!!
I am running the design premium CS3 on OSX 10.5 on a mac pro.
Thanks.

>Wade... I've seen it... and reported it originally to Adobe. I've since realized it's a 10.5.1 issue. It doesn't happen with 10.4.11, just 10.5.1
I've seen extra periods (.) and extra extensions.
then you and Dave have the same conflict with a third party software, corrupt font, corrupt preference or the like because it is not happening o my Mac Pro and I have the same model Mac as you do and I am working fine in 10.5.1 and only problem I have had with AI CS 3 is when I tried to place a 3D CAD file with the extension .dxf which is not really supported.
I have not seen this even once. Would you like to see screen shots, it honestly is not a 10.5.1 or Illustrator issue on its own. This has to be user specific.

How to get file path in the form \\filer01\dir\index.htm

Hi,
after selecting a file using the FileChooser dialog, i would like to convert the file path like "H:\index.htm" into a form like "\\filer01\dir\index.htm".
On my system, the logical device name H:\ is mapped to a directory on a file server "filer01".
Is there any possibility to do this conversion?
Thanks in advance.

hi,
i dont think java has a way of figuring out the actual mappings for a drive, you can retrive all drives that are present using the following code
File [] roots = File.listRoots();
then you could just iterate through the roots some of which may be mapped (but you cant figure out which is mapped and which is not).
So i guess the best way to do it is to have a Properties file with key,value mappings. for eg
h:\\, \\file01\dir\..
and then read the value from the Properties file, now if you want this for accessing a resource across the network you dont require to get the actual mapping, you can still use the mapped drive as you would use a unmapped drive.
hope this helpz
cheerz
ynkrish

Change not saved, file lost

Hello,
We're using Sharepoint 2013 to manage documents. I was editing a Sharepoint doc in excel and saved my work several times before finishing, however I did not check the doc back in upon completion. Instead, I created a PDF version (makes printing easier),
saved the PDF file to the same Sharepoint folder, and checked the PDF version in when I was done with it.
When I went back to the library to check in the excel version of the file, it was showing an older version of the document (from last night). I opened it, and lo and behold none of the changes I had made prior to converting the file to PDF were showing.
What happened to that file? Like I said, I saved it several times before converting to PDF, yet no copy of the changes exist on Sharepoint or locally. I disconnected from the network, opened excel locally and checked recent documents - it wasn't there. I checked
my Sharepoint recycle bin - not there. Versioning and publishing are enabled, but I was the only person working on this document. I searched the entirety of my hard drive - not there. I checked the version history - not there (last night's version is the most
recent).
I've done this before without issue. Both files (excel and pdf) would show up in the Sharepoint library with all changes. I'm at a complete loss on this and would love/appreciate help in recovering the excel version with all my changes (otherwise I just
lost 6 hours of work)!
Timeline of events:
Last night@7:16PM - Save and check-in excel file.
This morning@8AM - Open and check out excel file. Make changes and periodic saves along the way.
Today@2PM - Finish changes, save, create PDF, save PDF, check in PDF version. Go back to library to check in excel version only to find that the version from 7:16PM last night is the latest excel version available.
Regards,
KMS
EDIT: Sharepoint 2013, Office 365, OS: W8.1/64

Hello Cam,
Interesting. I'm sure nobody went into site settings and discarded changes.
I hard refreshed the site; file still not there.
I'm beginning to think it's IE11. I'm using 64-bit, and don't know how to use the 32-bit version (I'm not very savvy when it comes to this stuff). I have found a few tutorials online but I'm not sure I'm doing it correctly.
I appreciate all the help so far, Cam. At this point I've spent so much time searching for a solution I could've just redone the work! Ugh.
EDIT: Is it possible that I accidentally discarded my check out and therefore all my changes to the excel doc went unsaved? If so, wouldn't the fact that I saved my work several times prevent me from losing the changes? I'm so confused at this point!
It's odd that I have a PDF version of the document that shows ALL the changes that I made - essentially the finished product - and yet the excel document from which said PDF was created is gone!

Problem when saving files (file already exists-)

Woking in CS5.1.
When I save a document (as opposed to "save as"):
I get a message "some of the specified files already exist in the target location. The files marked below will be replaced".
The file I am working on gets saved, but creates a second version "file name-01.ai"
Any ideas?

Works fine here CS5 on Windows.
When I save, it will warn me only if the file with the same name already exists and if I choose to replace it it will replace the existing file keeping the name I'm saving it with.

File path of open data storage

Hello all!
Now I'm using the blocks of open data storage, write data and close data storage for storing and extracting result data. For the file path issue, before I
set the data path by double clicking the "open data storage" block and inserting the file location in the indicated place, and that worked!
Now since I made a stand alone application of this program and shall use it in other computers, the file location I inserted in open data storage block isn't
valid any more in other PCs. So I modified my source code by connecting a "current vi path" to the open data storage block's file path node instead of
inserting it inside the block, and this doesn't work! During running there shows an error in the write data block saying that the storage refnum isn't valid!
I'm wondering why I couldn't specify the file path like this. Any way to allow me to specify the file path as the current vi path?
Thanks!
Chao
Solved!
Go to Solution.

You need to account for the path changes when built in to an application, have a look at this example.
https://decibel.ni.com/content/docs/DOC-4212
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

How to read file from server if I have a logical file path?

Hi guys,
I'm having a pretty "on the run" question,
My program is currently reading a file from server using "open dataset" with file path like this (just example)
/usr/interface/abc/bcd/testfile.dat
Now I got a requirement to make it more consistent to read files, instead of reading that physical file name, I should read the files from a specific folder using logical path.
So I go to T code "FILE" and created a logical path called ZABC_FILE_PATH, unix compatible, with physical path is (for example),
/usr/interface/<sysid>/<client>/<filename>
My question is, can I still use open dataset statement to read this? if yes, how do I do that? If no, there should be alternative way, please let me know what you think. Thanks,

Thanks all, I figured it out.
ONe thing is that typo double quote
The other thing is the importing part, I need the full file path.
CALL FUNCTION 'FILE_GET_NAME_USING_PATH'
EXPORTING
    CLIENT                           = SY-MANDT
    logical_path                     = 'ZABC_MY_LOGICAL_FILE_PATH'
*   OPERATING_SYSTEM                 = SY-OPSYS
*   PARAMETER_1                      = ' '
*   PARAMETER_2                      = ' '
*   PARAMETER_3                      = ' '
*   USE_BUFFER                       = ' '
    file_name                        = v_1
*   USE_PRESENTATION_SERVER          = ' '
*   ELEMINATE_BLANKS                 = 'X'
IMPORTING
    FILE_NAME_WITH_PATH              = v_what_I_need
* EXCEPTIONS
*   PATH_NOT_FOUND                   = 1
*   MISSING_PARAMETER                = 2
*   OPERATING_SYSTEM_NOT_FOUND       = 3
*   FILE_SYSTEM_NOT_FOUND            = 4
*   OTHERS                           = 5
I really appreciate your contributions, thanks again!

Itunes Sort by LOCATION?? FILE PATH

hi, i was wonderin if i can set up my itunes sortin columns SORT BY LOCATION or FILE PATH(like windows media player), ive just started using itunes but all my songs are being organized by folder in different location. if someone can tell me how i can sort my songs by location it would be great!

aktote wrote:
In order to update the Artist and Album names efficiently
Oh, why didn't you say so? That's a different problem There are several pieces of software that will automatically update the ID3 tag of files based on their path. Personally I like Mp3tag:
http://www.mp3tag.de/en/
In any case, I do not know how to use the script file that you so generously provided, and will appreciate some instruction.
If you still want to use it, all you have to do is download the script (i.e. save it to your local computer), then double-click it to run it. You'll be prompted to select a playlist. You can select the "Music" playlist to do all your Music, or select a smaller playlist if you just want to test it out. The script will then update the Description of that playlist to the filepath.
HTH,
Rob

How can I get Firefox to directly open a file (like a torrent) without saving it at all

It seems that up until about 3 months ago - I could get firefox to download a file and open it directly without saving it to any particular place. This is particulary useful for downloading say a torrent or, for that matter, any other file I wish to use within another program but do not need to save the file.
Now I have to download the file, chose where it will be saved, open the folder click on the file, and then delete the now un-needed file. A huge hassle.
I am sure I could do this until a few months ago. For some reason I cannot now.
Please help

Make sure that the file has the .html file extension.
That should be sufficient.
Windows hides some file extensions by default.
Among them are .html and .ini and .js and .txt, so you may only see file name without file extension.
You can see the real file type (file extension) in the properties of the file via the right-click context menu in Windows Explorer.

Photoshop CC 2014 - The file can not be saved in path because an error has occurred

Hello,
I need again help regarding this issue. Sometimes but very often I receive an error, trying to save a PSD file, the error is: "The file can not be saved in <path> because an error has occurred". After that it is not possible to save the file in any format, using save or save in dialog. The only way to rescue the result is, to save for web as an jpeg. This error occours often using Topaz or NIK filter and until now only in PS-CC 2014. My workflow looks like this:
- Open NEF RAW file in Brdige
- Settings in ACR and give it into PS by clicking OK in ACR
- In PS doing a adjust some levels
- press SHIFT+STRG+ALT+E for a new summary layer
- Uing Topaz Adjust on the new level with 65% opacity
- press SHIFT+STRG+ALT+E for a new summary layer
- Using Topaz DeNoise on the new layer
- pres STRG+i and resize the image to 1200x797
- Using Topaz InFocus on the same layer as DeNoise
- create a vignette with brightness adjustlayer
After this workflow in nearly 90% it is not possible to save the file as PSD or something else, only to save for web as JPG. If I save the file after opening the RAW in PS and after every layer with Topaz Filter, I can save the file when I am done. Same issue occurs using NIK Filters in that way.
I tried to optimize the performance by using this guide: http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html doesn’t solve the issue.
I re- and installed all Adobe Products more than three times, doesn't solve the issu.
After that I ordered a new SSD drive and insall Windows 7 64bit inkl. All latest hotfixes, patches and drivers. I downloaded the newest Adobe Versions and the newest filter sets from Topaz and NIK. Doesn’t solve the issue.
This is my rig:
Gigabyte Z87X-UD4H mainboard
Intel Core i7 4770k
32GB Corsair RAM
250GB Samsung 840 Evo SSD Drive
nVidia Geforce GTX770
During my tests I took the same RAW File and created nearly 20 adjustment layers and summary layers, without using Topaz or NIK filters. No problem, I was able to save the file as PSD file.
From my point of view, actually, the error occurs only when I am using Topaz or NIK filters. Both supports doesn’t know the issue and if I search the web, I can’t find more then me. It seemed to depend on my settings, my rig or something else, perhaps a cache is overflowed or something like this. Adobe telephone support can’t help because I said I use a third party filter. But it occurs with two different manufactures…
So please guys, help me to figure out why this error occurs in my system.
Thanks in Advance and best regards,
Michael

Update: I tried several times to reproduce the error, actually it dosen't occur. I changed nothing on my system, without reboot it twice. This is what I said in my beginning times: it occurs sometimes but often. I will keep you up to date.

Saving file paths (like a bookmark gets saved?)

Similar Messages

Maybe you are looking for