Saving Files on FCP 6.0.2 and XSan

Hello All,
We're running into very frustrating issues as we are trying to save and open Final Cut Pro project files. We are currently using an XSan with ACLs set up to store FCP documents and related files. The six workstations aren't directly attached to the SAN, they connect via GigE to AFP shares (not an ideal solution, but it's what we can afford right now). It should be noted that our setup is currently using the "Golden Triangle" of directory services (AD user accounts and groups).
In December we upgraded our XSan to version 2 (which was a nightmare in itself), and all of our clients were upgraded to 10.5 with FCS2. After the upgrades, a few issues have arisen:
1. When a user attempts to save a FCP project, sometimes they receive the error message that the file is locked. From what I read on apples support site, this is due to permissions-- a file cannot be saved by one person, and then opened and saved by another. If the ACLs set on the folder reflect the groups that have full access to the files in which the project resides (recursively), why is this an issue? Or is this just another case of bad execution on apples part?
2. After concluding a "Save As", most of the time the alternate project file is able to be opened. We've run into several instances, however, when the project file is a very small size (16k or so), and gives the error message "Unable to open project file".. and it's pretty much trash. In these cases, the autosaves are behaving in a similar manner, being a very low size and not opening.
So my question is, does this all sound like permissions issues.. or is there something inherently wrong with the XSan at this point (e.g. corruption)? How are other people using XSan volumes in conjunction with FCP 6.0.2/FCS2 to edit and store files? Perhaps we're going about the whole setup the wrong way..
Thanks for your time and any advice you can provide..

Hi,
Thanks for taking the time to reply.
We have six producers.
Each producer has their own storage folder on the SAN: Producer 1, Producer 2, Producer 3, Producer 4, Producer 5, Producer 6. Each of these folders are located in One sharepoint called "Producers".
So we have one main producer, Well call Joan Smith. Joan has full access, recursively throughout her folder, which is producer 1. Joan has interns that work for her, who use an account called pro1edit1. Pro1edit1 has full access to Producer 1's folders as well, recursively. Joan and her intern never work on the same project at the same time from two different workstations. Each project is edited by one and only one user from one workstation.
Either Joan or her intern logs into the Mac (using either Joan's username/password, or the intern using their generic username and password [pro1edit1]). These accounts are AD Accounts. After a login, OD sends MCX policies to the clients (such as auto-mounting the AFP share points ["Producers", for instance] with their username and password). The user browses to their folder. If they create a new project, the create a folder with the project name. They then open FCP and set the settings (scratch, etc) to point to that folder. They save a project file with the name of the project within this same folder, keeping everything as one general "package" in the folder. For instance: /Volumes/Producers/Producer\ 1/5-Minute-Piece/FiveMinutePiece.fcp. All of the other folders are also located in here, scratch disks, autosaves, captures, etc.
When the user is done, they save, close final cut, and quit.
The next say, either Joan or her intern come in to do some work on the project. They log into one of the workstations, and they open the file. They conclude some edits, and upon trying to save the file they receive the error message that the file is locked. They then save the file as an alternate filename. Sometimes this works. Sometimes it says it saves it fine, but the next attempt at opening the file yields the error that the project cannot be opened. Upon inspection of the file, it's about 16k in size.
Using Producers folder/sharepoint, the permissions are as follows:
Producers:
<AD Domain>\grpStaffProduction: Allow: Read Only: This folder. *
<AD Domain\grpProEdit: Allow: Read Only: This folder. **
<AD Domain\grpProduction: Allow: Read Only: This folder. *
<AD Domain\grpEditAdmins: Allow: Full Control: This Folder, Children, all descendants. [inherited]
<AD Domain\grpDomainAdmins: Allow: Full Control: This Folder, Children, all descendants. [inherited]
Local Administrator: Allow: Full Control: This Folder, Children, all descendants. [inherited]
POSIX:
admin: RW: This Folder
staff: R: This folder
Others: None: This folder
Using Producer 1 (within the above folder), the permissions are as follows:
<AD Domain>\JoanSmith: Allow: Full control: This Folder, Children, all descendants.
<AD Domain>\pro1edit1: Allow: Full Control: This Folder, Children, all descendants.
<AD Domain\grpEditAdmins: Allow: Full Control: This Folder, Children, all descendants. [inherited]
<AD Domain\grpDomainAdmins: Allow: Full Control: This Folder, Children, all descendants. [inherited]
Local Administrator: Allow: Full Control: This Folder, Children, all descendants. [inherited]
POSIX:
admin: RW: This folder.
staff: R: This folder.
Others: R: This folder.
+* This group is used for another producer folder. This allows AFP to mount the share, and for the users to see their producer folder.+
+** This group is used for another producer folder. This allows AFP to mount the share, and for the users to see their producer folder.+
+* Joan, all other users in production, and their interns are apart of this group. This allows them to mount the AFP share and see which folders they have access to.+
So that's some more detail on our permissions and general workflow. We're up for suggestions. I appreciate your response!
-M

Similar Messages

  • Why doesn't flash player stay installed and why does the saved file disappear.

    Why doesn't flash player stay installed and why does the saved file disappear.  I have downloaded and installed flash player several times on my Win7 Vaio laptop. I have uninstalled and deleted all versions.  I am the administrator and I have also turned off my Security Software, but the same thing keeps happening over and over.  The Java Script is enabled and I have tried both downloading via IE and firefox.  It is rediculous that it keeps disappearing and I keep getting messages that the newest version is needed.  I am downloading directly from adobe and they say it is the latest.  Getting very frustrated.  They ask if we have any problems when we go to the finish line, but there is no place for comments.  I guess they don't really care if it works or not.

    So is it actually installed, or is it not?  If not, download and run the offline installers:
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)
    If it still does not work correctly, check
    http://forums.adobe.com/thread/885448
    http://forums.adobe.com/thread/867968
    In Firefox also check if the Shockwave Flash plugin is enabled.

  • MPG to Final Cut Pro , convert mpg files to FCP freely

    Why need to convert/import MPG files to Final Cut Pro?
    Final Cut Pro is the premium choice for any Mac video editing, and it is widely used by Mac users now. These MPEG standard files can be these different codes and cause failure in importing to Final Cut Pro. If anyone comes across the situation, the best solution is to get aids from MPEG/MPG to FCP converter for Mac, which can help you to convert MPEG group files to FCP compatible video format and then files can be easily imported for editing job.
    As we know that Final Cut Pro don't natively support MPG, MPEG, MPEG-1, MPEG-2 files, it can import MPEG-4 files (but need to be rendered once you place them on your timeline) and MOV files (without rendering). Therefore, to import MPG to Final Cut Pro directly, the best way is to convert MPG to Final Cut Pro supported Apple ProRes MOV files.
    How to convert MPG to Final Cut Pro(fcp)
    Step 1: Import MPG files
    Download the latest version of MPG to Final Cut Pro Converter, install and run. And then, click Add Files to import MPG files to FCP, or you can also drag MPG files directly to MPG to Final Cut Pro directly.
    Step 2: Choose output format and directory
    You can click the drop-down list of Convert Toto select output format as "Final Cut Pro"-> "Apple ProRes MOV ". After that, click "…" of Save Toto designate a directory to save your converted files.
    Step 3: Convert MPG to Final Cut Pro (X)
    Click Convert to transcode MPG to MOV for editing in Final Cut Pro.
    MPG to Final Cut Pro Converter is a practical tool for you to convert MPG, MPEG files to Final Cut Pro supported MOV files in order to free import MPG to Final Cut Pro (X) , FCE, iMovie on Mac OS X Mountain Lion . Besides, it is also able to convert MPG to other video files AVI, WMV, MP4, MKV FLV, DV, 3GP, ASF, RM etc.
    Related Article:
    MOV to FCP: How to convert MOV to FCP
    How to convert mp4 files to fcp freely

    Import unsupported MPEG-1 or MPEG-2 to Final Cut Pro 7/X, Final Cut Express 
    Summary:If you are looking for the best way to transcode MPEG-1 or MPEG-2 videos to ProRes MOV for FCP 7/X and FCE, you can follow this post, it has offered best solutions for editing MPEG videos on Mac in Final Cut Pro 7/X, Final Cut Express. 
    Cases: 
    The following are two problems when some users import MPEG-1/MPEG-2 to Final Cut: 
    "I am trying to import MPEG-2 files into Final Cut Pro X. I have the raw files from a Sony Handicam HDR-SR5 as well as raw files from an Sony Handicam MDR-CX560. These files were recorded as MPEG-2 files and copied from the camera hard drives (entire folders were copied containind the MPEG-2 fies) to a local hard drive on my computer. Final Cut Pro X does not recognize the files and will not import them. I have tried to use Compressor to conver the fies. I am using the very latest version that touts being able to export to Final Cut X format. I don't see that option anywhere in the settings." 
    Question: 
    Is there a way to get MPEG-1 or MPEG-2 files into Final Cut Pro X without having to convert them? 
    Answer: 
    Don't try to work with (highly compressed) MPEG 2 in FCP X. Use software to convert to ProRes 422 first, it's best codec for final cut pro or final cut express. Life will be much easier for you if you do. ProRes 422 is roughly between 5 and 8 times bigger than native camera footage - sometimes as much as 10 times, I believe, but it's well worth it for editing, effects and playback quality. The time required depends largely on your processor power but 30 mins sounds realistic. 
    Software you need: 
    Pavtube HD Video Converter for Mac 
    This software can convert MPEG-1 or MPEG-2 to Apple ProRes 422 codec for Final Cut Pro, Final Cut Pro 7, Final Cut Pro X or Final Cut Expr editing without rendering. 
    Step by step guide: 
    1. Download and install the best MPEG1/MPEG2 to ProRes Converter and launch it to add your videos to it. 
    2. Choose output format. Click on the “Format”> Final Cut Pro, Apple PreRes 422(HQ), Apple PreRes 422, Apple ProRes 422(LT), etc are all the proper choice for you. 
    3. Click "Settings" to adjust the parameters as you want, like Video Codec, bit rate, frame rate, Audio codec, sample rate, bit rate, channels. Set the video frame rate as 30fps, video size as 1920*1080 will be better. 
    4. Click Convert button to start MPEG-1 or MPEG-2 to Final Cut friendly Apple ProRes 422 for native editing on Mac OS X. 
    5. When the conversion ends, you can run the Final Cut Pro and click File --> Import --> Files to import the resulted MOV files and edit them in FCP easily, you can follow this import video to fcp guide. 
    From the steps above, I think you got the point to convert and import MPEG-1 or MPEG-2 files to Apple ProRes 422 for Final Cut editing, please have a try, this software will solve you MPEG-1 or MPEG-2 importing and editing problems, and then you can import and use your MPEG-1 or MPEG-2 in Final Cut Pro 7, Final Cut Pro X or Final Cut Express on Mac without any problems. 
    Now you can get DVD Creator which can help you easily burn video to DVD disc/ISO files. 
    Buy One Get Another Free?! Yes, just join Pavtube's Special Offers to get the promotion. 
    PS. If you have any problem, pls contact with [email protected] to get more information. You also can leave a message on Pavtube Community or Pavtube Facebook, we will answer your questions as soon as possilble. 
    Learn more Cameras/Camcorders related tutorial, pls view our FCP Column, etc. on http://www.pavtube.com/hot-topics/

  • Memory Used for Saving Files

    My IT person is giving me a hard time because I've used 5.5 gigabytes of memory in the 2.5 years that I've worked here design everything from brochures to ads, etc.  Does that sound like an unreasonable amount of memory for desktop publishing?  His solution is to have me save everything onto 11 discs and have a spreadsheet to determine what projects are on which disk. I have no point of reference - and haven't run into this issue in past jobs.  Between saving files in Illustrator, Photoshop, InDesign, PDFs and stock photography, the amount of memory seems reasonable to me.  And saving projects on discs sounds cumbersome.
    Appreciate the feedback.

    When talking about Memory most people think RAM not hard disk space. 5.5 gigs is a trivial amount of hard disk space to be used for projects in the DTP business. It should take up a trivial amount of space on your hard drive. HOWEVER, all your work if needed should be archived to CDs or DVDs as appropriate. If for nothing else backup. Each project should have its own disks or disks that can be externally marked. BTW, 1 terabyte drives are available for about $100. Tell IT to get a life, get off your back, and buy you a decent sized drive or two.

  • File Permission problems FCP and XSAN

    We have 5 Mac Pros connected to our XSAN (2 Xserves and 2 Promise arrays.). When a file is created on one of the FCP Macs and saved on the XSAN, the permission are OK (Individual - R/W, Group - R/W & Everyone RO.)
    The problem is when a file, generally audio (from our sound booth or music from an outside source) or a graphic (usually Photoshop from our Graphics folks) is brought in over the LAN and save to the XSAN volume, the permissions are Individual - R/W, no group is listed and Everyone - No Access.
    If they try work on something that another user started, they get permission errors if the sequence contains a file that was brought in from the outside.
    I know we can change permissions on a file, but there are so many of them that it is slowing down production.
    Is there anything we can do to either eliminate this happening, or have something like a drop folder they can place a file in to automatically change the file permissions?
    Any help with this would be greatly appreciated.
    The MacPros are running OS X 10.5.8 and FCP 7.0.3 and the XSAN is running Mac OS X Server 10.5.8 and XSAN 2.2.
    Thanks.

    If files saved to the AFP reshare are inaccessible by the fibre clients try this in terminal on your AFP re-share...
    sudo serveradmin settings afp:lock_manager = no
    Then restart AFP (or reboot), and re-propagate permissions back to where you need them. This will hand off file locking duties from AFP to the Xsan, which will help keep your permissions correct.
    JM
    (Thanks to Shane for showing me this)

  • Office 2013 applications cannot be made to show the "Documents" folder when opening and saving files

    (Windows Server 2012R2 and Windows 8.1 PRO)
    We are redirecting the user's "Documents" folder to the network (using Folder Redirection). The OS hides this fact however, and most applications simply see the "Documents" folder when opening or saving files, including Office 2003.
    Office 2013 however displays the actual path, which in this case is:
    \\sever1\redirect$\username\documents
    Even if you forcibly set the "Default local file location:"  in the Options Save area to the 'Documents' folder in, say, Word, Word immediately converts the local path to the network path.
    Is there anyway to get Office 2013 to follow the virtual path? All of other apps follow it and expose the users only to "Documents".
    Thank you so much.
    Dana

    There's nothing in my FAQ concerning screen savers, so I'm unsure why you decided to take that approach. From your description, it looks like you only tried a few of the suggestions before throwing in the towel. That's fine, it's your call.
    I don't have the problems you described with 10.4.7. Usually when folks have problems after an update, these are caused by either installing an update on an already-corrutped system or they've installed third-party applications or hardware that have been rendered incompatible by the update.
    Before installing software updates, you may wish to consider the advice in my "Installing Software Updates" FAQ. Taking the steps therein before installing an update often helps avert problems and gives you a fallback position in case trouble arises.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • HT5824 I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have number

    I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have numbers synced to iCloud.
    I tried to undo it but the app crashed.
    I am hoping there's like a previously saved version of my file in iCloud somewhere. 

    No, iOS does not do short term incremental back ups to iCloud such as you get with Time Capsule.It backs up when you do soo manually, or if set properly, when the device is plugged in and connected to WiFi. It will not have saved your changes as of 10 minutes prior.

  • I created a file in Photoshop CS5 (a photo) and another in Illustrator CS5 (a graph) to place in my InDesign CS5 brochure. When the Photoshop and Illustrator files are placed in InDesign, they look blurry - whether viewed in InDesign, printed, or saved as

    I created a file in Photoshop CS5 (a photo) and another in Illustrator CS5 (a graph) to place in my InDesign CS5 brochure. When the Photoshop and Illustrator files are placed in InDesign, they look blurry - whether viewed in InDesign, printed, or saved as a PDF. Can anyone give me some tips on how to fix this? Thanks!

    Ask in the program forums
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index http://forums.adobe.com/index.jspa
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

  • On Pages 09, my word documents I've been saving it to iCloud, to access anywhere, but I would like to keep my docs organized in files on my finder as usual, and saving to iCloud, I lose my local one.How can I fix it and not desorganize my files?

    On Pages 09, my word documents I've been saving it to iCloud, to access anywhere, but I would like to keep my docs organized in files on my finder as usual, and saving to iCloud, I lose my local one.How can I fix it and not desorganize my files?

    It's either in local folders, as it seem you had been doing, or in icloud.  If you go into the mac's Pages and view the icloud files, you can drag on onto another to create a folder.  But you can only have folder one level deep, so you can't organize your files/folders like you can on a mac, using nested folder several levels deep.

  • Unknown Error when I Logging and Transfer P2 Card files in FCP 6.0.6

    I have been trying for the past two week to Log and Transfer P2 files to my external hardrive using FCP 6.0.6 unsuccessfully.
    Originally I tried to Log and Transfer directly from the Panasonic HPX-170 in between my shooting. The first time it was a success but from then on I always get the same Unknown Error when attempting to transfer. When I encountered the Unknown Error during the second transfer I went on to create folders with the P2 contents on my external Hard Drive.
    When I drag any of the P2 folder content on the Log and Transfer window I can see all the clips. I can successfully transfer small B-roll clips I have but any big size file (all my interviews) return an Unknown Error symbol at the end of the transfer. I believe this is probably why I didn't encounter any issues during my first time.
    I tried deleting the preferences in FCP and then Logging and Transfer and it works if the systems settings are set for the Mac Pro but not for the external HD. The problem is I don't have enough space on my Mac. I have cleared 45GB of space but my P2 files total 54GB. I tried the same process with a Mac Power Book with FCP 5.1.4 and again in encounter the same problem.
    The external HD is a 1TB Western Digital that I have used before with FCP for editing but never before with P2 files. Its in good working order and has 79GB free space remaining. Both the camera and the P2 cards (16GB and 4GB) are also performing as expected.
    I would appreciate any suggestions.

    #36 - One or More P2 files failed to import.
    Shane's Stock Answer #36 - "One or more clips failed to import..."
    Very often in the field with this camera the camera operator will delete clips from the P2 card that they just don't like. That is the beauty of this camera. But, the still for that video file (located in the CLIP folder in the CONTENTS folder)...the still that you see when you are in the P2 Import window...is not deleted. So you will see the image, and the name, but the video file would have been deleted.
    What you can do it compare the file names in the VIDEO folder and CLIP folder and see if anything is missing. If something is, then you know what the problem is. You can then just import the rest a few at time, skipping that one.
    ALSO...in the P2 Import window...in the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
    ALSO...make sure your file names aren't too long. Try shortening them and see if that works.
    ALSO make sure that the folders that contain the CONTENTS folder doesn't have any odd characters like /!@#$%^&*()?.
    Shane

  • I created an image in Photoshop and saved it as the PSD file. Now when I try and open it it says it is not compatible with my version. How could this be when I created it in this version?

    I created an image in Photoshop and saved it as the PSD file. Now when I try and open it it says it is not compatible with my version. How could this be when I created it in this version?

    That depends on why it won't open.  Most of the time it means the file is corrupted and unlikely to be recovered. If you saved it right after adding or copying a LOT of layers - then it might just be the layer limit and we can attempt to recover it.

  • Using iPhoto 09, 8.1.2 How do I re-route saving pictures to the hard drive? Currently am saving to files on 'my' partition, and would like to change to save to a shared file so both partitions can view and access.

    Using iPhoto 09, 8.1.2 How do I re-route saving pictures to the hard drive? Currently am saving to files on 'my' partition, and would like to change to save to a shared file so both partitions can view and access.

    Drag the Library from the Pictures folder to the Users/Shared folder. I would point out that folks doing this on 10.6 and later frequently meet permissions issues. You might do better moving it to an appropriately formatted External Disk.

  • While saving multiple attachments from mail, files with same name are added and not replaced

    While saving Multiple Attachments from Mail, existing file with same name are not overwritted but new files are added in the folder.

    Bjørn Larsen a écrit:
    Hi all
    Hope to get some help with Elements Organizer.
    I have 12-15 years of digital photos that I now want to import into my newly aquirede Adobe Elements Organizer / Photoshop. Since my Nikon names the files with continous numbers from 0001 to 9999 I have multiple files with the same name although they are not alike at all. My previous software had no problems with that since I keep the photos in separate file folders based on import date. I generally import photos after each event and so name the folder with the date and some event info (e.g. 2014.12.24 - Christmas at grandparents).
    That is a common situation, I have the same limitation for files not going over 9999 on my Canons...
    Now - when I import my photos into Elements Organizer I get a lot of error messages with "same name exist .....) Hmmmmmmm
    Please sate the exact wording of the error message, I have never seen a message stating 'same name exist...' or equivalent; only messages about files already in the catalog. Files already in the catalog mean that some files have the same 'date taken' and file size in Kb.
    Any suggestions. I'm using a mac and tried to rename files based on date taken. The mac can do that but it takes ages to go into each folder and run the renaming script there.
    I also use a similar folder creation scheme (such a date naming is the default for the downloader). That way I never get a message about duplicates for the same file names.
    However - I can't be the first or only person with this problem so I figure that some workaround must be known out there. Maybe the import action can recognize date taken or - well. Thank you very much in advance if you can help me out here.
    You can alsways set the downloader to rename the imported files with a unique new name, there are many options in the 'advanced' dialog of the downloader. I don't know about Macs, but I don't thing there is a difference.

  • "The file [name of file] may have been changed by another user since you last saved it." Issue affects both network and local files.

    When a certain user saves a file in Excel 2010, she gets a message: "The file <name of file> may have been changed by another user since you last saved it."  She can choose to save as another file or overwrite with her changes. 
    This just started happening a week or so ago.  She was concerned that someone else was accessing her files, but we did several tests that opened, made a change and saved in a matter of seconds, and she still gets the message.  It happens on
    most files, but not all – both network and local.
    We already tried the QFE_Saskatchewan registry fix.  I also checked the file server for Services for Macintosh.

    You may be confused by the error in Excel saying “another user”. Actually Excel cannot tell who (the real human) is editing the file. Based on my research the No.1 possibility of the error is KB2626998.
    2626998  Connection to a network document is lost in the 2007 Office system or in Office 2010 after the computer resumes from standby
    http://support.microsoft.com/kb/2626998
    For Excel 2010, follow these steps:
    a.  Click Start , click Run , type regedit in the Open box, and then click OK .
    b.  Locate and then select the following registry subkey: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Excel\Options
    c.  On the Edit menu, point to New , and then click Dword Value .
    d.  Type NetworkAvailableTimeInSeconds , and then press Enter.
    e.  Right-click NetworkAvailableTimeInSeconds , and then click Modify .
    f.  In the Value data box, click Decimal , type a number value, and then click OK .
    Note This registry subkey sets the time, in seconds, that Excel waits for the network to resume. For example, if you type 15 for the number value, Excel waits 15 seconds for the network to resume. You might have to do some tests in your own environment to
    determine an appropriate value. You may have to try multiple numbers.
    g.  Locate and then select the following registry subkey.
    HKEY_CURRENT_USER\Software\Microsoft\office\14.0\common\Internet
    h.  Repeat step 2C through step 2F again. Reuse the same value that you used previously.
    i.  Exit Registry Editor.
    Feel free to post back. Thanks.
    Cheers,
    Tony Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please contact
    [email protected]

  • I saved my completed rendered video in Publish and Share as an MP4, but where is the file saved to. I set it to be saved on my desktop, but I don't see it. thanks

    I saved my completed rendered video in Publish and Share as an MP4, but where is the file saved to. I set it to be saved on my desktop, but I don't see it. thanks

    markg
    What version of Premiere Elements and what computer operating system? You have a few other threads awaiting follow up, and consequently that information
    is not available elsewhere.
    What is your specific export...
    Publish+Share
    Computer
    AVCHD
    and Presets = MP4 - H.264 1920 x 1080p30 or something like that.
    Specific please.
    But what specifically are you entering in the Save In: field of the dialog that includes the Save button to initiate the export process.
    Are you saving it as a file to the Desktop or to a specific folder on the Desktop? Have you given the export a distinctive file name?
    The screenshot shows the Save In: to the Desktop as a file.
    I have no idea of your background with the program, so I ask these questions so as to take nothing for granted.
    If the computer Desktop is crowded, as mine often is, it is easy to have difficulty spotting a file save to the Desktop.
    We will be watching for your follow up.
    Thank you.
    ATR

Maybe you are looking for

  • HP 1610 All In One not printing blue

    I lent a friend my 1610 All In One when his printer died, he bought new cartridges and it worked well.  The next day however blue does not print. He uses an older Mac before we run out to buy a new cartridge i wanted to get any suggestions you may ha

  • Can print over network, but scan over network doesn't work

    Scanner communication cannot be established from Windows 7 PC to 1536dnf MP. Printing from that computer is fine.  scanning from other computers over the network is fine also. I have uninstalled and reinstalled HP software, but that didn't fix the is

  • Migration from R2 to R3

    I have migrated BO XI R2 report to R3. but i am not getting the same data. can anyone please tell what can be the reason for this change in the data values.

  • Querying a Dropdown List

    I have a dropdown with populating code that looks like the following: myDropdownBox.DataSource = myDataSource; myDropdownBox.DisplayMmeber = "typeDescription"; myDropdownBox.DisplayValue = "typeId"; Assuming that I have a typeId with a value of, let'

  • About Subnet with RV042

    Good afternoon friends... I have RV042 Router, I'm using only one Internet conection, I'm using IP group like this 192.168.95.x, my DHCP setting use 192.168.95.120 to 192.168.95.240, but in this time I have 245 workstations (may be I will have 25 add