Saving from bridge and converting from raw to jpeg

why can I not convert from raw to jpeg in bridge (camera raw) and save to a location different from the original

Yep sure can.
In bridge select your picture(s) then edit in camera raw.
In camera raw look in the bottom left of the camera raw dialog box and you will see a save as button.
This will allow you to save your raw files as jpg, tiff or pngs.

Similar Messages

Hi, I would like to copy my photos (from iphoto) and movies (from i movie) from my Mac book air to my imac in which I also have iphoto and imovie with photos and movies. My goal is to have a unique source in my imac for my photos and movies. Thanks .

Hi,
I would like to copy my photos (from iphoto) and movies (from i movie) from my Mac book air to my imac in which I also have iphoto and imovie with photos and movies.
My goal is to have a unique source of photos and movies in my imac.
Thanks !
Nicolas

As to iPhoto
Connect the two Macs together (network, firewire target mode, etc) or use an external hard drive formatted Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
For iMovie support please post in the iMovie forum
LN

HT5192 what happen if i updated my ipod (4th generation) from there and not from my coputer??

update my ipod touch 4th generation from there and not from my computer?

Connecting to a new computer or iTunes will always erase the device first. Back up manually before, by right clicking on the iPod in the device list and choosing "backup". A manual backup does not include the sync process. You can use this backup to restore from after your iPod got wiped during the first sync.
See also iTunes: About iOS backups to see more info about the content of a backup, and How to back up your data and set up as a new device if you want to know more about saving info from the iPod before setting it up in iTunes.

I made an iMovie, 6.0.3 using music from iTunes and photos from the Internet. It looked fine on iMovie, but when I uploaded it to youtube,some of the photo near the beginning was corrupted.What steps should I take to export iMovie for youtube?

I made an iMovie, 6.0.3 using music from iTunes and photos from the Internet. It looked fine on iMovie, but when I uploaded it to youtube, some of the photo near the beginning were corrupted on youtube. I tried a different photo, and the corruption took place at the same moment of the video. How do I prepare the video for export to get it ready for youtube? I wasn't sure whether to clik web or web streaming. Am I supposed to clik Quick Time after I clik Share?

I unfortunately cannot remember where I got the 'trrndlines' plugin... I assume that it must have been from CFX (as it is located under /Users/Dom/Library/iMovie/Plug-ins/cfx/XXXtrrndlines.bundle).
As for what it does, I also do not know, as I do not think I ever used it in my previous video projects.
At this stage, I think I just need to uninstall it so that iMovie doesnt try to use it.
Do you know how to uninstall a CFX plugin in iMovie?
NOTE: I have re-installed iMovie 6.0.4 (instead of iMovie 6.0.3), but still encounter the same issue.

I bought my ipad from ksa and am from egypt .. my ipad connected to the itunes in ksa but from someone else laptop and i came here to egypt and it says itunes could not connect to this ipad becuz an unknown error :S what should i do please someone tell me

i bought my ipad from ksa and am from egypt .. my ipad connected to the itunes in ksa but from someone else laptop and i came here to egypt and it says itunes could not connect to this ipad becuz an unknown error :S what should i do please someone tell me !!?

Your iPad is syncd with iTunes on your computer and your iTunes account controls what's in your iPad. Previously it must have been sync'd with another person's iTunes account in which case you need to completely clear it out to make it your own.
Go to Settings > General > Reset (at bottom) > Erase All Content and Settings
Then plug it into your computer and restore it with YOUR iTunes account.
Or if your have an iTunes account already setup under your name with your own apps and media -
Plug it into your computer, open iTunes if it doesn't open automatically and on your iPad page, click Restore
Let it proceed. Then the iPad will no longer be looking for someone else's account.

Somehow, I created 2 Appe ID's...1 from home and 1 from work. I purchased additional space on iCloud with one ID, but I need to transfer it to the other.

Somehow, I created 2 Appe ID's...1 from home and 1 from work. I purchased additional space on iCloud with one ID, but I need to transfer it to the other.

Having read some other posts I think I have answered my question. If I was somehow able to terminate my old (unwanted) account and Apple ID I would no longer be able to access the material I bought with that ID- so I'm stuck. I have to learn how to manage that situation.
This is unfortunate for Apple consumers. Life is complicated for families these days and this "rule" although it is in place to prevent cheating and fraud makes things unnnecessarily difficult for me and my family as in my niaevity (sic) with the online world I bumbled into this situation. Not everyone is out to rip off Apple - one of the worlds richest corporations- or the entertainers who market their work through iTunes.I would just like to be able to enjoy the entertainment I pay for where and when I like to on whichever computer is available to me. And I'm not terribly computer literate.
It would have been nice to have had the opportunity to speak just once to a real person in the employ of Apple to explain my situation to them.

I Want To Transmit Audio from Mic and Video from WebCam.....???????????????

I Want To Transmit Audio from Mic and Video from WebCam on Another Computer. I have used AVTransmit2.java file and AVReceive2.java file for Transmission and Receiving but They Transmit Only Video On Another Computer on a network without any error. Any One Help me How Can i Transmit both Audio & Video at the Same time ????????
i m using This Command for Transmittion
java AVTransmit2 vfw://0 192.168.0.1 192.168.0.2 10000
and this Command For Receiving
java AVReceive2 192.168.0.1/10000 192.168.0.2/ 10002

Excuse me foro my bad English but I speak English like Tarzan.
To trasmit both video and audio I created a MergingDataSource wich incorporates video and audio data sources. Then I created a Processor with this DataSource and a RTPManager for each track of the processor. It works.
Stupendoman

Connecting from Office and Connecting from Remote

Hello
Can anyone tell me what is the difference between "Connecting from Office" and "Connecting from Remote" in the connection wizard ?
Thank you in advance

Hi Naldoo,
Into installation of SAP BPC you are specifying for application server 3 names:
Application Server Name
External Application Server Name
Virtual Name
The third one is used in case if you are using NLB.
The first one is the one using by "Connecting from Office"
The second one is used by "Connecting outside of office"
For this reason External name must be FQDN )Fully qualify name)
Application Server name can be short name
I hope this will help.
Regards
Sorin Radulescu

I'm receiving duplicate emails, one from icloud and one from yahoo

I'm receiving duplicate emails, one from icoud and one from my yahoo, how do I fix this?

Have you turned on a forwarding or copying service at yahoo? The only way to get duplicate emails from two different email services is if one of them forwards and copies to another, or if senders are sending to both email addresses.

(261705413) Q RPCC-21 Can you compare a performance of "usual" RPC from EJB and RPC from Web Services?

Q<RPCC-21> Can you compare a performance of "usual" RPC from EJB and RPC from Web
Services?
A<RPCC-21> There are additional performance overheads for invoking a web service
when compared to straight EJB invocation. However, you should not think of web
services as a way to replace your EJBs instead you should be willing to accept
some performance decline for the massive gains in platform interoperability and
the ability to exposure your services outside of you firewall.
Additionally, performance decreases will be dependent on several factors. The
most significant of which is the XML-Java and Java-XML translation of the SOAP
message. This can be very fast if the XML structure is simple but if you web services
requires a parameter that has a complex XML format you may see a more significant
slow down.
Adam

Sorry if this sounds like I am new to this but I am.
So, the extended version is the format that would be used if you were not utilizing the files that the wsdl2java function creates?
And this is done to when you want more flexibiility for the user to call your service?
So, you would push to have the stub files used when you want to control how the web service is used?
thanks for the feedback.

Accidentally switched off iMac at mains. Now only goes to grey sceen when switched on. Have removed all USB's from ports and cable from screen rear but still grey screen. What next?

Accidentally switched off iMac at mains. Now only goes to grey sceen when switched on. Have removed all USB's from ports and cable from screen rear but still grey screen. What next?

I would reset the PRAM
http://support.apple.com/kb/HT1379
or
I would try and reset the SMC
http://support.apple.com/kb/ht3964

Difference between Add from transaction and Add from Authorisatio default

Hi All,
Could anyone tell me the difference, from PFCG -> Menu -> Add from transaction and Add from Authorisatio default?
Thanks and Regards, Pradeep

I'm not a fan of "hiding" stuff from users so the not appearing in the menu part isn't a biggie for me. If you do need to give background auths for something but don't want it to appear in a menu then this will let you do it without adding manual auths or changing standard object values
Where I find it useful is that it allows you to assign & maintain indicators for stuff like Function Modules and Services. No real business advantage other than it makes your security implementation cleaner.

Images won't open in PS from Bridge and Camera Raw.

I am suddenly unable to open images in Photoshop CS5 from Bridge or Camera Raw - what have I done wrong - how can I rectify it.

Mullit wrote:
I am also have a lot of start up problems with the computer itself and have lost a lot of my desk top, my internet search engine and various other things. Luckily all my documents and pictures are still intact though.
This sounds serious. I would make sure you have a backup on a seperate hd or disk or you photos and other documents. If the drive fails you may loose everything on the hard drive.
Check your free space and fragmentation on hd. You should have about 20% free space. So if you have a 400 gig drive you should have 80 gig free.

Move photos to trash from Bridge and can't find them in trash

Help!
When I was doing the selection from Bridge, I delete some of the photos by selecting them then clicked 'move to trash', but I can't find them in trash,I am using Bridge CC, When I was using the previous edition there's no problem, but things changes in CC,
Could anyone tell me how to restore them? Really appreciate it

Mac or Widows?
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Ios 6, my wifi doesnt work, even after switching wifi on and off, aswell as removing saved wifi spots and switching from manual to auto

ios 6, my wifi doesnt work
even after switching wifi on and off
as well as removing saved wifi spots
and tried switching from manual to auto
it works intermittently after these changes are made, but still shuts off.
i have ios 6 on both the iPhone 4 & the Iphone 5.
my router at home is D-Link router
please help!

You have the same problem in two mobiles? Uou....
I have had used D Link router before, and I faced problems to connect my computer.
Now I bought Netgear, and it shows strongly better than the f.... D Link...
Try:
Settings>>WiFi, and then turn off Ask for Conection;
Or:
Settings>>Privacity, be sure the Location Service is turn on;
Or:
In Settings>>General>>Reset, select "Reset all Adjusts". (Sorry, but it will change some personal adjustments, but will not delete anything at all)

Saving from bridge and converting from raw to jpeg

Similar Messages

Maybe you are looking for