Saving from CC to CS4 file changes paths to group of anchors around the brush defination

Hi,
I use CC but I'm currently doing a job that required me to save any ai files as CS4. I am using the charcoal brush definition however when I save the files cs4 and then reload them the path/lines are turned into a shape with multiple anchor point. Is there anyway to stop this?
Cheers
Phil 

Ive just worked it out, although I was using the same named brush effect in CC it must be different to the CS4 version as ive just used the brush effect that come with the supporting files and it now works. Sorry to have wasted your time.

Similar Messages

  • I cant edit an CS4 file open in CS6. Colours, Most of the tools are in-active

    I cant edit an CS4 file open in CS6. Colours, Most of the tools are in-activeC

    once is enough to ask. Editing problemCS6

  • A1145 imac g5 isight, freezes after 2-5 mins and then there no power from keyboard and mouse. Changed HDD and no luck and on the install page it freezes. You have to force it to shutdown and leave it for 5-10 minutes and try to turn it on again AHT Passed

    A1145 imac g5 isight 2.1GHz
    , freezes after 2-5 mins and then there no power from keyboard and mouse. Changed HDD and no luck and on the install page it freezes.
    You have to force it to shutdown and leave it for 5-10 minutes and try to turn it on again
    Apple HardWare Test Passed
    10.5.11
    Orginal DVD's 9.2

    Could be a heat problem.
    Also, try these:
    Resetting the SMU on a G5 iMac:
    http://support.apple.com/kb/HT1767
    and on resetting the PMU on a Power Mac G5, G4 and G3 :
    http://support.apple.com/kb/HT1939?viewlocale=en_US
    http://support.apple.com/kb/HT1436

  • How can you change apps store when you travel around the world?  After upgrading to IOS6, suddently my iPad has switch me to the greek apps store instead of leaving me into my canadian apps store.  Therefore, I cannot upgrade 60  apps on my iPad.

    How can you change apps store when you travel around the world? 
    After upgrading to IOS6, suddently my iPad has switch me to the greek apps store instead of leaving me into my canadian apps store.
    Therefore, I cannot upgrade 60+ apps on my iPad.
    Does someone know how to revert this situation?
    Thanks for your help!

    Try this:
    1. App Store>Feature>Apple ID (at bottom of page)
    2. Tap on Apple ID>View Apple ID
    4. Enter your password
    5. Country/Region>Change Country or Region

  • Opening and saving from web site pdf file

    I found a site where you can download many pdf file. In order to automatize the process i would create a vi using activex.
    i generate some url  like this "http://remotesite/folder/file1.pdf" and i want the vi open the site, download the page an save the file1.pdf in a desired folder. In this forum there are many examples that solve only  half of my problem, in fact they load in a browser the pdf file opening Acrobat reader but i do not know how to save the file.
    Thank you
    lelluzo

    Why do you want to do this with ActiveX?
    Try the WinInet: http://www.mooregoodideas.com/goodLabViewStuff.htm
    Simply use WinInet Easy Get Url, with a path to the file, and store the data as binary file. I used this a lot for the axact thing to are trying to do. Put the VI in a for loop, and try to automatically build a string that forms the paths to the files. Sometimes, I get the source HTML from a download page, and edit the HTML so I get a multiline string. This forms the input for the loop, and there you go. All your files nicelly on disk. Note that some of these sites will block after a few downloads, to prevent this sort of things.
    Regards,
    Wiebe.

  • I received pictures in a dozen emails and saved each picture into one file in .pages.  I did not import the photos before doing this and now iPhoto won't recognize the pictures because they are in a .pages file.  How do I get the pics to iPhoto?

    I received a dozen pictures in a few emails and I saved them all into one file in pages.  I just copied and pasted.  I do not have the originals any longer.  Iphoto will not permit me to import the pictures as it does not recognize a .pages file, nor can I simply click and drag from the pages document to iphoto nor from pages to the desktop to iphoto.  How can I save each picture I guess back into a jpeg and then import them into iphoto or have i lost them to a pages document forever?  This is urgent as I need the pictures made into a book on iphoto for work by Friday!!!  Please advise!  Thank you.

    Greetings,
    Locate the Pages document wherever it's located on your computer and click once on it to highlight it.
    Go to File > Duplicate to make a backup copy of the file.
    Click once again on the file to highlight it.
    Go to File >  Get Info
    In the "Name & Extension" category remove the ".pages" extension and put in ".zip".
    Close the info window and double-click the now renamed pages file (zip file now).It will decompress into a folder which contains all the base components including all the images you added.  These can be dragged onto the iPhoto icon to import them.
    Hope that helps.

  • Down saving from CS5 to CS4 in a batch

    Hello!
    I have a large volume of CS5 files to downsave to CS4 so they can be used on another machine. Is it possible to do this in a batch? I've tried a couple ways so far and I'm definitely doing something wrong as the new files still tell me they were generated in a new version of Illustrator. That, or the entire batch just saves over the same single file for the whole action.
    If anyone could give me a simple walkthrough, that would be lovely!
    Thanks.

    That, and explain
    .. as the new files still tell me they were generated in a new version of Illustrator ..
    (because they are).

  • Saving from PS to LR with Changes

    I recently started taking anamorphic still which I export to CS 5 from LR 5.7 to edit them.. I then "unstretch" from the 2X to render a normal perspective. Looks fine in CS5, but when I save as a TIF back to LR it doesn't retain the new aspect ratio. Any guidance?

    Stop using Save As and just Save. If LR is set to send images as TIFFs to PS all you have to do is use the Save command. I suspect LR is seeing the original TIFF without any adjustments and your Save As adjusted copy is not being imported back into LR.

  • Field ID in ESP files PCM - I would like to swap around the order of dimensions when exporting from PCM to CSV

    Hi all,
    I am currently having the following issue:
    I am trying to export specific set of data from a PCM model to a csv. The current esp file follows the standard PCM order.
    I would like to have the following:
    Export Version, Cost Object1, Periods, RC etc
    Could you please suggest how I could do that.
    I am thinking swap the places of  <FieldID>.....</FieldID> manually in ESP file. However not sure which field ID relates to which dimension.
    Looking forward to hearing from you,
    Your help will be appreciated.
    Milena Paunova

    I have this problem also.  If you get an answer will you please share it with me.  Thanks

  • Number emails from iCloud...per day. I need a work around the restriction

    I use a MacBook Pro, lots of memory, drive space etc. That is not the problem. I am the President of a Mac club, 749 members and membership person of our fishing club, 78 members. I send out many emails each day. iCloud prevents me from sending due to the restriction they place on iCloud. Anyone have a work around?

    The backup is encoded as a SQLite database.  It can't be read without special software.  All the "files" you see inside the backup file are different components of the backup, not different backup files.  I believe the reason that not all the dates match the date of the backup is because the backup file components are only updated when you sync rather than recreated from scratch, so not all the components are new.
    To read and extract data from the backup you have to use 3rd party software such as iPhone Backup Extractor.

  • Conversion from CS3 to CS4 - closing files without saving

    One more issue...
    I'm making temporary changes to a book and a document so I want to close the documents without saving. This is what I'm currently using.
                    myBook.close(SaveOptions.NO);
                    myDocument.close(SaveOptions.NO);
    What seems to be happening is that the file is saved anyway. No Save As window opens. I've looked in the Object Model and it looks like CS4 uses the same syntax as for CS3. Any suggestions?
    B

    It looks like you're trying to add an existing CS3 document to a new CS4 book. InDesign wants to save the CS3 document in CS4 and so gives you the Save As dialog. You can either go through all the existing CS3 documents you'll be adding and save them out from CS4, or add a few lines to the script that will do it. (Change the variable name I used if it's used somewhere else in your script.)
    // Creating book
    var myBookFileName = myPath+"Personalized Modules/PW.indd";
    myBookFile = new File( myBookFileName );
    myBook = app.open( myBookFile );
    myBook = app.books.add( myBookFile );
    // Add the front cover
    myFilename = myPath+"Personalized Modules/PW_Cover.indd";
    myFile = File(myFilename);
    // Save cover document in current version
    myDoc = app.open(myFile,false);
    myDoc.save(myFile)); // will overwrite CS3 file with CS4 file
    myDoc.close();
    myBook.bookContents.add(myFile);
    // Add the rest of the individual files
    I didn't test this code. Let me know if you have problems.
    Jeff

  • I have InDesign CS (v 3.0.1) can newer CS4 files be saved to open in this version

    I would rather not upgrade if the files can be saved to open In InDesign CS. Thanks
    Also can I download the free trial of CS4 and use this to save the file to my older version?.
    I received a 500mb file from a client today and would like to solve this problem myself rather than have them re save & re send the file. Thanks, Shawn New Haven, CT

    Backward compatibility in Indesign works like this:
    Any version of ID can open files from any version up to that release. Once saved in a newer version, files cannot be opened in older versions, with the following exception, of sorts. Beginning with CS2 (version 4) files can be exported to .inx (Interchange Format) which can be opened by the version doing the export and one version earlier. Any features used in the newer version which are not available in the older version will be lost, and text will most likley recompose and change line ending points due to differences in text engines for each version. It is possible to hack CS4 .inx to sometimes make it open in CS2, but it is not guaranteed.
    Exporting to back save is not a recommended workflow and should be considered a last resort. If you know a file will need to be opened in an earlier version, you should do all work in that version for best results.

  • Conversion problem moving from CS3 to CS4 - adding files to book

    I had a script which was working beautifully in CS3. Now we've moved to CS4 and it refuses to cooperate with me. I've tried a solution offered on the forum but it's not working for me.
            // Creating book
            var myBookFileName = myPath+"Personalized Modules/PW.indd";
             myBookFile = new File( myBookFileName );
            myBook = app.open( myBookFile );
             myBook = app.books.add( myBookFile );
            // Add the front cover
            myFilename = myPath+"Personalized Modules/PW_Cover.indd";
            myFile = File(myFilename);
            myBook.bookContents.add( myFile);
            // Add the rest of the individual files
    For some reason, when it gets to the bookContents.add statement, it opens up a SaveAs dialog. I'm wondering if this is a setting within InDesign CS4 rather than a script issue.
    I'd really appreciate any idea.
    B

    It looks like you're trying to add an existing CS3 document to a new CS4 book. InDesign wants to save the CS3 document in CS4 and so gives you the Save As dialog. You can either go through all the existing CS3 documents you'll be adding and save them out from CS4, or add a few lines to the script that will do it. (Change the variable name I used if it's used somewhere else in your script.)
    // Creating book
    var myBookFileName = myPath+"Personalized Modules/PW.indd";
    myBookFile = new File( myBookFileName );
    myBook = app.open( myBookFile );
    myBook = app.books.add( myBookFile );
    // Add the front cover
    myFilename = myPath+"Personalized Modules/PW_Cover.indd";
    myFile = File(myFilename);
    // Save cover document in current version
    myDoc = app.open(myFile,false);
    myDoc.save(myFile)); // will overwrite CS3 file with CS4 file
    myDoc.close();
    myBook.bookContents.add(myFile);
    // Add the rest of the individual files
    I didn't test this code. Let me know if you have problems.
    Jeff

  • STARTED IT, BUT STILL NEED HELP -- INPUTTTING CHARACTERS FROM LOADED FILE INTO TABLE, SELECTING STRINGS FROM TABLE AND PLACING IN NEW TABLE, SAVING NEW TABLE TO SPREADSHEET FILE

    I AM TRYING TO IMPORT CHARACTERS FROM A TAB DELIMITED FILE INTO A TABLE ON LABVIEW.  ONCE THE DATA IS IN THE TABLE I WANT TO BE ABLE TO SELECT INDIVIDUAL STRINGS FROM THE TABLE AND PLACE IT IN A NEW TABLE.  WHEN I CLICK ON A STRING I WOULD LIKE THE SELECTED STRING TO SHOW IN A TEXT BOX LABELED 'SELECTED STEP'  AFTER ALL THE SELECTED STRINGS IS IN THE TABLE I WOULD LIKE TO SAVE THE NEW TABLE AS ANOTHER SPREADSHEET -- TAB DELIMITED -- FILE, MAKING IT ACCESSIBLE TO OPEN.  HERE IS WHAT I HAVE SO FAR.  I CAN INPUT DATA INTO THE TABLE, BUT I CAN ONLY TRANSFER ONE STRING INTO THE TABLE I WOULD LIKE TO BE TO INPUT MULTIPLE STRINGS.    ALSO WHENEVER I TRY SAVING THE FILE, IT ALWAYS SAVES A UNKNOWN FILE, HOW CAN I GET IT TO SAVE AS A SPREADSHEET FILE.  THANKING ALL OF YOU IN ADVANCE FOR YOUR HELP!!!!!!
    Attachments:
    Selector.zip ‏30 KB

    Pondered,
       The question you are asking is the same one that you asked in: http://forums.ni.com/ni/board/message?board.id=170&message.id=132508#M132508, to which I supplied a revised version of the original vi you used (which was modified from the original one I supplied to an earlier thread). A couple of questions: 1) What does my latest not do that is in your question, 2) Why are you starting yet another thread about the same problem?  We are here trying to help, it makes it a lot easier if you keep the same problem in the same thread, it reduces duplication of effort from those that might not have been following the previous thread(s).  Those of us that don't have our "names in blue" are just doing this "for fun" (the blue names are NI employees, who may still be doing it "for fun"), and it makes it more fun if it doesn't seem (correctly or not) that our attempts are ignored.  If an answer doesn't help, or seems incomplete, post a little more detail to the same thread so that the original respondent, or someone new, can provide more information, or understand your problem better.
    P.M.
    Message Edited by LV_Pro on 07-20-2005 01:20 PM
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • Error 7 produced when saving to a spread sheet file using a compact rio

    Hi
    Im having a little difficultly saving to a spread sheet file using a compact rio. I bundled the data from a NI 9215 with a timer and stuck it into an x-y graph and that works fine as it goes round in shift registers. But then I passed the data out of my while loop unbundled it, turned it into a 2d array and tried to write it into a spread sheet file using the appropriate i/o vi provided by labview 8.2. I have hooked up all the requirements like format, and file path. But it keeps returning error 7 and says that my file path is incorrect. I’ve tried using a constant file path, ive tried creating the file before running the program, ive tried just writing the file straight to a disk in this case h:\test.asc but every time it comes back with error 7. I then went to a lab downstairs to see how they did it and the method I’m using it works down there but is exactly the same as mine upstairs. I’m a little confused by this one.
    Any pointers would be much appreciated.
    Dan

    Hi
    I apologise I didn’t specify I was only using a NI cRIO-9004 not realising you could get ones that had a USB port. I thought mine would behave in the same way as a DAQ device and write the file back onto the main computer hard drive. Is this not what happens if not how do you make it do that. The computer is a networked system with its own C:\ harddrive, but my personal space is on H:\ which must be like a pretend hard drive, or alternatively can you make the cRIO write it to a memory stick within a USB port of the programming PC itself. Or can you write onto memory of cRIO but then how do you download the data?
    Also I apologise that I posted the message twice only did cos I thought it might be in the wrong forum.
    Thanks
    Dan

Maybe you are looking for