Saving images with an associated .wav file

Occasionally I will create a voice note with an photograph - this is to identify a species or note a location.
Is there some way to (automatically) tag all my images which a sound associated with them?
Thanks

Thanks, Steven. But that's not it. Here's some new information: The camera
I was using (Panasonic HVX 200) had the frame rate set to 720 30pn.
However, the "scene file" mistakenly applied listed 24fps. Premiere Pro
thinks this footage is 29.97. Is it possible that it's actually 24fps and
that's why it's about 25% shorter than the corresponding .wav file? If so,
is there a way to "fool" Premiere Pro into slowing down the footage?
Unless I'm off the mark completely. It's been known to happen.......

Similar Messages

How to convert RAW files that saved in UCCX server to wav file?

Hi all,
How we can covert the RAW files that are saved in UCCX server to wav file by using command prompt in UCCX servers. Or is there some other way? So that we should be able to hear the sound of these files.
C:\Program Files\Cisco\Desktop_Audio
Regards
Ali Raza

Hi,
I use Switch File Audio Convertor from NCH Software to do this.
It is a commercial product but there is a time limited evaluation and if you decide to keep it it is only $30.
http://www.nch.com.au/switch/index.html
It is great for converting audio files to the correct format for music on hold as well.

When I try to open a saved image with the "htm" file extension all I get is a page of gibberish text.

I have the new Snow Leopard system on my iMac. I saved several images from an art site. The file extension on each image is "htm". when I try to open each image all I get is gibberish tpye text.
Can convert these "images" to jpeg files so I can view and edit them?
thanks

If the images have a .htm(l) file extension then you need to rename the files and give them an image file extension like .jpg<br />
That should be sufficient to make programs recognize them as images.

Problem with cdrdao reading .wav files

Hi,
I have being having problems with using cdrdao to read .wav files that I created from other sources (.flac, .ogg and .mp3) using flac123/ogg123/mpg123.
Basically, this is the error
[phil@discovery hack]$ cdrdao simulate --device /dev/cdrom1 toc
Cdrdao version 1.2.3 - (C) Andreas Mueller <[email protected]>
ERROR: ./01_achilles_last_stand.wav: not in PCM format.
ERROR: Header of audio file "./01_achilles_last_stand.wav" is corrupted.
The 'toc' file contains....
[phil@discovery hack]$ cat toc
CD_DA
TRACK AUDIO
COPY
NO PRE_EMPHASIS
TWO_CHANNEL_AUDIO
FILE "./01_achilles_last_stand.wav" 0
START 00:02:00
Having used the 'cdrdao' program previously, I am pretty sure the 'toc' file is sane.
I then noticed a difference between .wav files using the 'file' program:
[phil@discovery hack]$ file *.wav
01_achilles_last_stand.wav: RIFF (little-endian) data, WAVE audio, stereo 44100 Hz
test.wav: RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit, stereo 44100 Hz
I found that the 'test.wav' file worked when substituted as the FILE in the 'toc' file......
With a bit of research I found a work around, namely to convert the .wav file to another .wav file using 'ffmpeg'.
[phil@discovery hack]$ ffmpeg -loglevel quiet -i 01_achilles_last_stand.wav -f wav -ar 44100 -ac 2 test2.wav
The resulting files...
01_achilles_last_stand.wav: RIFF (little-endian) data, WAVE audio, stereo 44100 Hz
test.wav: RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit, stereo 44100 Hz
test2.wav: RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit, stereo 44100 Hz
Changing the 'toc' file to pick up the two test* files worked fine.
Does anybody know either a better fix or the reasons why this is happening?
Regards
Phil Q

I am not sure I understood what you actually did or intended.
Did you plug in the camera cards into a card reader and import with Lightroom, copy to destination on one portable HD?
That should work.
As soon as you unplug the portable HD, the storage location will be labeled as offline and all thumbnails have the "?". As soon as you replug the portable HD and ensure that it has the same drive letter as before, the "?" will vanish.
The "?" indicates that the file is not accessible at the storage location which you told LR during import.
It has nothing to do with being able to save.
Note: only in importing with "copy" chosen will LR actually touch a file (and copy it to the indicated storage location). Inside LR there are only records pointing to the image files and holding all sorts of descriptions, like metadata and develop instructions.
If you use NX2 for the task to copy images from camera card to portable HD, and import them afterwards to LR (add in import settings), that makes no difference.
LR will show the "?" whenever the portable HD is unavailable or the path invalid because with a different drive letter.
Cornelia

I cannot synch 24fps video footage with an audio .wav file. Is there a speed conversion factor?

I inadvertantly shot a video interview with a new camera (Panasonic HVX 200) set at 24fps. Because of that, the camera wasn't getting an audio signal from the microphone so in a panic, I hauled out my trusty old Zoom H4Nex digital audio recorder and captured it that way. Now I cannot synch up the audio and video in FCP CC (MAC OSX 10.9.2). Clearly, the audio file is about 25% longer than the video file, however, I cannot find the exact factor to change the audio speed to create lip synch. It always ends up a little short or a little long. If you will point out the error of my ways - I will promise to never do THIS again!

Thanks, Steven. But that's not it. Here's some new information: The camera
I was using (Panasonic HVX 200) had the frame rate set to 720 30pn.
However, the "scene file" mistakenly applied listed 24fps. Premiere Pro
thinks this footage is 29.97. Is it possible that it's actually 24fps and
that's why it's about 25% shorter than the corresponding .wav file? If so,
is there a way to "fool" Premiere Pro into slowing down the footage?
Unless I'm off the mark completely. It's been known to happen.......

Problems saving image with outer glow as gif

I've created a logo with an outer glow and it looks great as an illustrator file but there are problems when I save it as a gif file. The glow is replaced by a white blob around the logo. Not sure if this has anything to do with it but the image has a transparent background. I'm new to the Adobe suite. Should I be adding the glow in Photoshop or can it be done, and look right, in illustrator?
Any help would be greatly appreciated. Thanks.

GIFs cannot have alpha transparency. So you need to choose the same background color as you use on the HTML page, so that Illustrator can calculate your graphic when saving for web.
PNG can have alpha transparency, but you cannot use the "screen" blend mode in it.

Saving images with quality 12 increases size. Why?

A minutely modifyed image saved with quality of 10 maintained its original size (more or less), but saving with a quality of 12 increases size.
I would like to know why?
I'd appreciate your comments.

Because that's how .jpg works. Sizes of less than 10 usually compress your files somewhat, lower numbers resulting in smaller file sizes and more compression, with a corresponding loss of quality. Sizes greater than 10 also use the .jpg compression algorithm, but they choose less compression, and so two pixels that may have been compressed together at compression 10 may now be separated at compression 11 or 12, resulting in a larger file. (But that doesn't imply an increase in the quality, even at 12 there is still a slight decrease in quality in that the .jpg saved version still doesn't exactly represent what you saw on the screen)
The amount of modification to the photo doesn't really matter in how much the space the .jpg compression takes up.

Why does adobe camera raw keep saving images with the incorrect white balance?

I am having an issue when I edit images. here is the scenerio:
I choose 50 Raw files and open them in Camera Raw.
I edit each individually - many of them have different white balances.
Once I have each image how I want them, I select all and click done.
Sometimes all the edits are saved correctly, but very often all the changes are saved correctly except white balance. The program seems to take the white balance from one image and applies it to all the images.
Why??? Very frustrating to have to go back and individually edit all the white balances again.
Thanks!

It seems to not happen if I slow down a few seconds before I click select all and then done.
That should not be the problem, once you changed settings and hitting done they all should be applied immediately. It even is not needed to first select all, that is only needed when you need to open or save the files.
But I still don't know why it would only change the white balance in every shot and not everything.
If it happens again could you first in Bridge select one of the none changed files and with right mouse click menu choose select purge cache for selection?
And can you provide more details about system version, app versions and file types?

Saving HTML with DIV to DOC file and display correctly

I'm generating a DOC file of HTML. I happen to use DIV and
CSS to make it look the way I want it to, but MS WORD is ignoring
the formating.
MS Word 2000

You might want to provide some more details if you expect a
useful response. I've generated Word files using ColdFusion and
haven't had any problems with the styles. You might want to try
creating a document in Word, saving it as HTML, and then seeing
what the styles look like. Keep in mind that you have different
units of measurement for print (points and inches instead of
pixels) that could affect a document.

Saving image with transparent background for web/Dreamweaver

How do I save a little image, so that the background stays transparent. I already have the image set up in Photoshop with a transparent background and have saved it as gif and png. When I import it into Dreamweaver the background stays white instead of transparent. What am I not doing right, since I read several posts saying that png and gif are the right formats to save in, if you want a transparent background?
Thanks for any help with this,
Anne

Well now that you have told me to save with some sort of an alpha channel, it works perfectly.
In CS5:
Select layer,"Composition,Make movie". Then navigate to "Output module" and choose an option that has "alpha channel" in the title.Choose a name for your project "Output to". I now use "lossless alpha".I don't know if that is the best one, but it seems to be working fine.
There is no "Quicktime" option in CS5 as in older versions of AE.
I was trying to save as a video in general or for photoshop and that just wasn't working out well.
I don't know what the "Frames to Layers import assistant" is that you mentioned though. I still tend to drag and drop, rather then import.
Thanks for your help.

Saving images with BitmapData

I am saving a screen shot of my application using the
following code...
var bd : BitmapData = new BitmapData( target.width,
target.height );
bd.draw( target, new Matrix());
to get the contents of the target (a UIComponent) into the
BitmapData object, which I then convert to a PNG, etc, etc. My
question revolves around the fact that when I do this, the
resulting image only shows the "viewable" portion of the target
component. As an example, I have a Canvas that is nested in another
Canvas in such a way that there are scrollbars. When I do the
saving, rather than getting the entire size of the inner Canvas, I
only get the viewable size of the outer Canvas.
My question is, how do I (or can I) get the entire content of
the inner Canvas and not just what is viewable/
Thanks

In Keynote you can add your image to a slide, move the bottom of it upwards, select reflection, adjust the background color and opacity to get the effect you want and then export as a JPEG.
If the Keynote slide size doesn't suit your photo size you can do as above, take a snapshot and crop it.

How to use Lightroom 5 [was: 6] to transfer related .WAV files for VISIBLE display next to my Nikon D4s NEFs?

Please help me. The ability to do this crucial to my workflow as a photojournalist and columnist.
Today I discovered that I have a serious problem when I tried to use Lightroom 5 to transfer my RAW images and their associated .WAV files from my Nikon D4s memory card. I did a search online and found that a Canon user has this same problem:
Part way through the transfer a message box appeared on-screen telling me: "Some import functions were not performed. These files are not photos or videos," followed by a list of all of the .WAV files.
I rely on those audio files to remind me of things that I need to know about for my column with regards to the associated photos. Sometimes I even use those short audio files to record sound effects.
I am using a Mac running on the new Yosemite operating system.
I like the fact that Lightroom does not do destructive editing vis a vis the added description and other metadata, as opposed to Nikon transfer which apparently does do "destructive editing," but I've been using Nikon Transfer 2 and, before that, previous versions of this program for years. I have never had an issue with corrupted photos due to the transfer process. This is a significant drawback for me of Lightroom 5.
Surely many, if not most, people at Adobe use Canon and Nikon DSLR cameras, so why would they allow such a serious flaw to be in Lightroom 5?
Am I missing a step that will eliminate this problem or is there a workaround for it?
Thank you for your help.

I entered the Library drop-down menu, clicked on "Find" and typed .wav in the search window. Lo and behold, only the 13 photos that had associated .WAV audio files were then visible in Library view.
Hmm, I wouldn't have guessed that would work. It doesn't work in my LR 5.7 -- it doesn't find any photos with associated .wav files. I wonder what's different about your situation. In your Library Filter bar, when you do Library > Find, what appears in the two red circles below?
In my previous message, I was referring to the third-party plugins Data Explorer and Any Filter but forgot to include the links. Though the two plugins are quite a bit different, they each give you the ability to specifically search for associated files with a given extension.

Put in the clipboard, from an VB program, an image with a tooltip and a hyperlink to paste them into a Word or PowerPoint doc.

I tried to put
in the clipboard an image with an associated tooltip
and a hyperlink to paste them into a Word or PowerPoint doc.
I tried to do it with the usual Clipboard's methods SetData and GetData. It's easy to paste an image, text, rich text, html, but it does not appear to be able to associate metadata or hyperlink to an image.
Usally the tooltip
and the hyperlink are in the metadata
associated with the object.
I think it can be done with the CliboardData class and its Data and Metadata properties, working with the different items of the List of Objects, but I don't know how to tackle it.
Any suggestions?
Thank You

I tried to put
in the clipboard an image with an associated tooltip
and a hyperlink to paste them into a Word or PowerPoint doc.
I tried to do it with the usual Clipboard's methods SetData and GetData. It's easy to paste an image, text, rich text, html, but it does not appear to be able to associate metadata or hyperlink to an image.
Usally the tooltip
and the hyperlink are in the metadata
associated with the object.
I think it can be done with the CliboardData class and its Data and Metadata properties, working with the different items of the List of Objects, but I don't know how to tackle it.
Any suggestions?
Thank You
Does word or powerpoint associate a tooltip and hyperlink to an image and then allow that image with those associations to be copied to another open word or powerpoint document? If not then your probably wasting your time.
This code can "listen" for items copied to the clipboard. Needs a RichTextBox on a Form.
Option Strict On
Imports System.Runtime.InteropServices
Public Class Form1
' System.Windows.Forms.DataFormats class http://msdn.microsoft.com/en-us/library/system.windows.forms.dataformats(v=vs.110).aspx
Declare Function AddClipboardFormatListener Lib "user32.dll" (hWnd As IntPtr) As <MarshalAs(UnmanagedType.Bool)> Boolean
Declare Function RemoveClipboardFormatListener Lib "user32.dll" (hWnd As IntPtr) As <MarshalAs(UnmanagedType.Bool)> Boolean
Dim DataFormats As New Dictionary(Of String, String)
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Me.CenterToScreen()
DataFormats.Add("Bitmap", "Specifies a Windows bitmap format. This static field is read-only.")
DataFormats.Add("CommaSeparatedValue", "Specifies a comma-separated value (CSV) format which is a common interchange format used by spreadsheets. This format is not used directly by Windows Forms. This static field is read-only.")
DataFormats.Add("Dib", "Specifies the Windows device-independent bitmap (DIB) format. This static field is read-only.")
DataFormats.Add("Dif", "Specifies the Windows Data Interchange Format (DIF) which Windows Forms does not directly use. This static field is read-only.")
DataFormats.Add("EnhancedMetafile", "Specifies the Windows enhanced metafile format. This static field is read-only.")
DataFormats.Add("FileDrop", "Specifies the Windows file drop format which Windows Forms does not directly use. This static field is read-only.")
DataFormats.Add("Html", "Specifies text in the HTML Clipboard format. This static field is read-only.")
DataFormats.Add("Locale", "Specifies the Windows culture format which Windows Forms does not directly use. This static field is read-only.")
DataFormats.Add("MetafilePict", "Specifies the Windows metafile format which Windows Forms does not directly use. This static field is read-only.")
DataFormats.Add("OemText", "Specifies the standard Windows original equipment manufacturer (OEM) text format. This static field is read-only.")
DataFormats.Add("Palette", "Specifies the Windows palette format. This static field is read-only.")
DataFormats.Add("PenData", "Specifies the Windows pen data format which consists of pen strokes for handwriting software; Windows Forms does not use this format. This static field is read-only.")
DataFormats.Add("Riff", "Specifies the Resource Interchange File Format (RIFF) audio format which Windows Forms does not directly use. This static field is read-only.")
DataFormats.Add("Rtf", "Specifies text consisting of Rich Text Format (RTF) data. This static field is read-only.")
DataFormats.Add("Serializable", "Specifies a format that encapsulates any type of Windows Forms object. This static field is read-only.")
DataFormats.Add("StringFormat", "Specifies the Windows Forms string class format which Windows Forms uses to store string objects. This static field is read-only.")
DataFormats.Add("SymbolicLink", "Specifies the Windows symbolic link format which Windows Forms does not directly use. This static field is read-only.")
DataFormats.Add("Text", "Specifies the standard ANSI text format. This static field is read-only.")
DataFormats.Add("Tiff", "Specifies the Tagged Image File Format (TIFF) which Windows Forms does not directly use. This static field is read-only.")
DataFormats.Add("UnicodeText", "Specifies the standard Windows Unicode text format. This static field is read-only.")
DataFormats.Add("WaveAudio", "Specifies the wave audio format which Windows Forms does not directly use. This static field is read-only.")
AddClipboardFormatListener(Me.Handle)
End Sub
Private Sub Form1_FormClosing(sender As Object, e As FormClosingEventArgs) Handles Me.FormClosing
RemoveClipboardFormatListener(Me.Handle)
End Sub
Protected Overrides Sub WndProc(ByRef m As Message)
If m.ToString.Contains("msg=0x31d") Then
Invoke(New ClipboardListenerDelegate(AddressOf ClipboardListener))
End If
MyBase.WndProc(m)
End Sub
Private Delegate Sub ClipboardListenerDelegate()
Private Sub ClipboardListener()
If InvokeRequired Then
Invoke(New ClipboardListenerDelegate(AddressOf ClipboardListener))
Else
RichTextBox1.Clear()
For Each Item In DataFormats.Keys
If Clipboard.ContainsData(Item) = True Then
RichTextBox1.AppendText(Item & " .. " & DataFormats(Item) & vbCrLf)
End If
Next
End If
End Sub
End Class
La vida loca

When I right click to save as an image it does not let me save the image as anything but "all files".

When I right click on an image to do a save as it does not let me save the image as a jpeg, all that is in the drop down menu is "all files" which saves it as a bunch of numbers and letters etc. It save it as an aspx file.

Try to add the .jpg file extension yourself if Firefox doesn't do that when you save an image file.<br />
If you've already saved images with a wrong file extension then rename them and add a .jpg file extension. Check the Properties of the file via the right-click context menu to see if that has worked.

Wav file in email won't play

I got an email with a brief wav file ( telephone message) and they always play on iPhone, but wouldn't play on iPad. Why?

Are you sure you did download the entire message? The built-in media player (QucikTime) should play WAV files and no third-party apps should be required.
See https://discussions.apple.com/thread/3652515?start=0&tstart=0
Nevertheless, if you in no way can make it work, let me know and I compile a full list of WAV-capable third-party players (there are a lot of them).

Saving images with an associated .wav file

Similar Messages

Maybe you are looking for